Hi to all
A Spanish mate, who has a BKL-AL00 flashed a wrong firmware, a firmware for other variant, now he has lost both IMEI. Service center said that the only solution for this is changing the motherboard.
I've read in other Honor subforum, I don't remember which, someone bring a solution flash a previous firmware and wait for the OTA.
Anyone has boot, ramdisk and system for BKL-AL00 to flash it?
Or know any other solution to this?
Santi_SAZ said:
Hi to all
A Spanish mate, who has a BKL-AL00 flashed a wrong firmware, a firmware for other variant, now he has lost both IMEI. Service center said that the only solution for this is changing the motherboard.
I've read in other Honor subforum, I don't remember which, someone bring a solution flash a previous firmware and wait for the OTA.
Anyone has boot, ramdisk and system for BKL-AL00 to flash it?
Or know any other solution to this?
Click to expand...
Click to collapse
Boot to erecocery and try to connect to wifi and see if it is able to download the patch, i had same issue and fixed this way. Being AL10 it should be able to download the firmware
shashank1320 said:
Boot to erecocery and try to connect to wifi and see if it is able to download the patch, i had same issue and fixed this way. Being AL10 it should be able to download the firmware
Click to expand...
Click to collapse
Which patch? Do you mean an OTA?
Many thanks
Santi_SAZ said:
Which patch? Do you mean an OTA?
Many thanks
Click to expand...
Click to collapse
It will be full firmware similar to - BKL-L09C675BXYZ- Full.
If by any chance that appears on the screen, you can proceed with 100% guarantee it will solve the imei issue
shashank1320 said:
It will be full firmware similar to - BKL-L09C675BXYZ- Full.
If by any chance that appears on the screen, you can proceed with 100% guarantee it will solve the imei issue
Click to expand...
Click to collapse
I'll tell to him to do this
Thanks
Related
Could somebody please upload his Belguim ftf file?
I forgot to make a backup when I flashed to ICS but now I have yellow tint ;s
Thank your verry much
PS; It's in the firmware compilation but the download takes days so i'm sorry
patato800 said:
Could somebody please upload his Belguim ftf file?
I forgot to make a backup when I flashed to ICS but now I have yellow tint ;s
Thank your verry much
PS; It's in the firmware compilation but the download takes days so i'm sorry
Click to expand...
Click to collapse
Here's the original build prop (6.0.A.3.62). If you replace yours with this one you should be abble to restore using pc companion.
niaboc79 said:
Here's the original build prop (6.0.A.3.62). If you replace yours with this one you should be abble to restore using pc companion.
Click to expand...
Click to collapse
I'm not rooted
patato800 said:
I'm not rooted
Click to expand...
Click to collapse
If you were then you couldn't use Pc companion
Now think
Anybody? ;c
I really need it plz help me
Or can someone tell me what i have to do with that build.prop file??
Thank you ;p
I'm not sure but i thought that the yellow tint is a hardware issue and has nothing to do with software whatsoever.
PS: i'm from Belgium too, installed the CH version and no problems here.
Xploda said:
I'm not sure but i thought that the yellow tint is a hardware issue and has nothing to do with software whatsoever.
PS: i'm from Belgium too, installed the CH version and no problems here.
Click to expand...
Click to collapse
Yes but if I want to bring it in for warranty I need the official version or not?
Ty ;D
PS do you have a copy of you official firmware?
patato800 said:
Yes but if I want to bring it in for warranty I need the official version or not?
Ty ;D
PS do you have a copy of you official firmware?
Click to expand...
Click to collapse
I don't think someone will ever notice that you didn't install the official over the air update you were supposed to get.
And also, it's not like you unlocked the phone and installed a custom rom. It's still an official Sony rom.
I don't see any obvious reason why a repair center would check your firmware version. After all it's a known issue and the solution to the problem is there.
And no, i don't have a backup image or so of my stock firmware.
There was a post here on xda with all GB tft files and there was a Belgium one.
Just search for that post, I can't seem to find it anymore tho
Xploda said:
I don't think someone will ever notice that you didn't install the official over the air update you were supposed to get.
And also, it's not like you unlocked the phone and installed a custom rom. It's still an official Sony rom.
I don't see any obvious reason why a repair center would check your firmware version. After all it's a known issue and the solution to the problem is there.
And no, i don't have a backup image or so of my stock firmware.
Click to expand...
Click to collapse
I don't think the shop where i bought it (Phonehouse) will bother it but maybe when it comes to Sony they will see it and won't replace it?
patato800 said:
I don't think the shop where i bought it (Phonehouse) will bother it but maybe when it comes to Sony they will see it and won't replace it?
Click to expand...
Click to collapse
I returned my phone last week (also in Belgium) and to be sure I re-flashed my phone to stock.
I recommend doing it to.
Hitmax117 said:
I returned my phone last week (also in Belgium) and to be sure I re-flashed my phone to stock.
I recommend doing it to.
Click to expand...
Click to collapse
Where can I find that stock rom? Thank you
patato800 said:
I don't think the shop where i bought it (Phonehouse) will bother it but maybe when it comes to Sony they will see it and won't replace it?
Click to expand...
Click to collapse
I'm quite sure they won't bother
I think of it like this, your phone arrives at the repair center. The person who has to repair it reads what is wrong with it. He then says: "Ah, i see, the yellow tint issue. Time to get to work, but not without checking the software version first".
It's a very unlikely scenario if you ask me. He's just going to fix the screen, check if it still works completely and maybe do some additional tests in the service menu or so.
But you could indeed just do what Hitmax117 mentioned, just to be sure.
patato800 said:
Where can I find that stock rom? Thank you
Click to expand...
Click to collapse
Hehe after some searching it was just in the general section
here you go http://forum.xda-developers.com/showthread.php?t=1599303
Belgium generic is in the second post
i have MIUI 2.9.29
the modem i had was JKLF4
i tried flashing through CWM the JKLH3 , it flashed ok but since then i get NO SERVICE and no signal all the time
i tried flashing back to JKLF4 and it did flash it back but still i get no signal
IMEI is ok
what to do ?
wtffff
even after restoring from a CWM image i made a week ago i still get no service
what does it want from me ?????
AzurA86 said:
wtffff
even after restoring from a CWM image i made a week ago i still get no service
what does it want from me ?????
Click to expand...
Click to collapse
CWM doesnt back up the modem..you modem would be the same it was before..flash the earlier modem you had working..or try different modems..
zoot1 said:
CWM doesnt back up the modem..you modem would be the same it was before..flash the earlier modem you had working..or try different modems..
Click to expand...
Click to collapse
i tried all sorts of modem from the modem collection page here on xda
those modems used to work when i had a different rom but still, is there a way maybe to extract the modem from the ZIP file of miui rom ?
i tried searching modem.bin inside the miui zip file but theres none.
if theres no modem.bin file in it then does that means it uses the existing modem ?
if so then il need to revert back to the rom i had before miui ? or just revert to stock rom ?
ive flashed stock rom and still nothing
also, on mobile networks menu i cannot see any networks to choose from
update
i just noticed my sn has been corrupted , its 000000000000
how can flashing a simple modem from CWM cause that ?
i'am solved problem come my topic..
http://forum.xda-developers.com/showthread.php?t=1918601
---------- Post added at 07:12 AM ---------- Previous post was at 07:10 AM ----------
AzurA86 said:
update
i just noticed my sn has been corrupted , its 000000000000
how can flashing a simple modem from CWM cause that ?
Click to expand...
Click to collapse
your imei number 0000** or 0049*** ?
my imei did not change, just the sn
AzurA86 said:
my imei did not change, just the sn
Click to expand...
Click to collapse
fixed by NSPRO box
but still i dont know what caused this
is there a way to backup the SN data ?
ive backed up my IMEI-EFS but what about the SN is it possible ?
AzurA86 said:
fixed by NSPRO box
but still i dont know what caused this
Click to expand...
Click to collapse
ouw your serial number 000? ok solved
http://forum.xda-developers.com/showthread.php?t=1918601
step step apply..
i saw your thread too late i already fixed it by NSPRO
but will try that if it happens again no doubt so thank you
still i would like to avoid from getting into that situation.
AzurA86 said:
i saw your thread too late i already fixed it by NSPRO
but will try that if it happens again no doubt so thank you
still i would like to avoid from getting into that situation.
Click to expand...
Click to collapse
There is a solution to update currently you dont need to use NSPRO.. Android is freedom dont be constant..
Dont stick to NSPRO you can use my patch everytime when your network gone
i would gladly try your patch only i already used NSPRO to fix it
right now im just glad my phone is working again
Does anybody have the update.zip for BLA-A09 8.0.0.119(C567)?
Erick-kewone said:
Does anybody have the update.zip for BLA-A09 8.0.0.119(C567)?
Click to expand...
Click to collapse
Received as an OTA, have not seen it anywhere else. You know it breaks night mode, light painting on camera? Security patch update, and supposedly fixes a lock screen issue that I've never had are about it. Better off staying on 112.
I could use any Bla-a09 firmware. I need it to repair my phone. I flashed the wrong system.img in fastboot
Erick-kewone said:
I could use any Bla-a09 firmware. I need it to repair my phone. I flashed the wrong system.img in fastboot
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=77248270&postcount=72
There are earlier builds in OP
ante0 said:
https://forum.xda-developers.com/showpost.php?p=77248270&postcount=72
There are earlier builds in OP
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-bla-a09-c567-usa-t3775258
I recently picked up a Chinese variant (STF-AL10) Honor 9 and wen through the process of unlocking the bootloader, rooting and re-branding to the European variant (STF-L09). All good. Was able to flash the latest ROM (STF-L09C432B378) using HURUpdater. All good except the 2 capacitive keys not working. Saw that there was a potential fix with an updated Kernel for build 366. So.... I tried flashing STF-L09C432B366 with HURUpdater. The flash appeared to be successful (no error messages except for the a couple that are expected apparently). But the phone was dead right after I tried rebooting from TWRP. Absolutely none of the reboot button combinations work.
Has anyone experienced this before? The seller is promising to fix or replace the phone so I've sent it back. But I'm still interested in finding out what went wrong. Are there any pitfalls when downgrading -- I only went from 378 to 366. My impression was that HURUpdater was fairly reliable. I'm wondering if the the B666 ROM was corrupted. I'm still surprised that I ended up with a hard-bricked phone.
Thanks.
SirShnike said:
I recently picked up a Chinese variant (STF-AL10) Honor 9 and wen through the process of unlocking the bootloader, rooting and re-branding to the European variant (STF-L09). All good. Was able to flash the latest ROM (STF-L09C432B378) using HURUpdater. All good except the 2 capacitive keys not working. Saw that there was a potential fix with an updated Kernel for build 366. So.... I tried flashing STF-L09C432B366 with HURUpdater. The flash appeared to be successful (no error messages except for the a couple that are expected apparently). But the phone was dead right after I tried rebooting from TWRP. Absolutely none of the reboot button combinations work.
Has anyone experienced this before? The seller is promising to fix or replace the phone so I've sent it back. But I'm still interested in finding out what went wrong. Are there any pitfalls when downgrading -- I only went from 378 to 366. My impression was that HURUpdater was fairly reliable. I'm wondering if the the B666 ROM was corrupted. I'm still surprised that I ended up with a hard-bricked phone.
Thanks.
Click to expand...
Click to collapse
Hello, for me happend quite the same thing, I tried to downgrade my original STF-L09 from b378 to b368 with HURUpdater and right after rebooting from TWRP, where I chose reboot to recovery, the phone died. Because it is in warranty I sent it to service last week. So I'm looking forward to what they'll say to me
Regards.
You can not lower the firmware version if your firmware is gt Turbo
Your phone will fall into the state of usb ser
You can restore it but it costs money
I reconstructed my phone from this brick myself
gaguga said:
You can not lower the firmware version if your firmware is gt Turbo
Your phone will fall into the state of usb ser
You can restore it but it costs money
I reconstructed my phone from this brick myself
Click to expand...
Click to collapse
What was the first firmware with gt Turbo? b377? Previously I successfully downgrade from b376 to b368.
btw your post is very useful!
Yeah, that explains a lot. What's been the best fix so far for the capacitive buttons problem? The one route I've seen is flashing the kernel file in fastboot mode from one of the patched builds (366, etc.) Any other ways that work?
gaguga said:
You can not lower the firmware version if your firmware is gt Turbo
Your phone will fall into the state of usb ser
You can restore it but it costs money
I reconstructed my phone from this brick myself
Click to expand...
Click to collapse
How did you do that? Dc phoenix?
Midhon58 said:
How did you do that? Dc phoenix?
Click to expand...
Click to collapse
no, not phoenix
gaguga said:
no, not phoenix
Click to expand...
Click to collapse
IDT?
oslo83 said:
IDT?
Click to expand...
Click to collapse
Yes
gaguga said:
Yes
Click to expand...
Click to collapse
What does it mean IDT?
Thanks.
modest.young said:
What does it mean IDT?
Thanks.
Click to expand...
Click to collapse
Special program
gaguga said:
Yes
Click to expand...
Click to collapse
gaguga said:
You can not lower the firmware version if your firmware is gt Turbo
Your phone will fall into the state of usb ser
You can restore it but it costs money
I reconstructed my phone from this brick myself
Click to expand...
Click to collapse
My phone came back from service center after bricking it during downgrading from b378 to b368 with changed motherboard. So unlocking the bootloader via HCU client was needed. Unlocking succeeded, so now I'm going to flash new treble ROMs.
modest.young said:
My phone came back from service center after bricking it during downgrading from b378 to b368 with changed motherboard. So unlocking the bootloader via HCU client was needed. Unlocking succeeded, so now I'm going to flash new treble ROMs.
Click to expand...
Click to collapse
And I like you))))
https://forum.xda-developers.com/showpost.php?p=78564317&postcount=1081
cioce said:
I try to flash B376 (already flashed some months ago) over B378 and now it's HARDBRICKED
like this https://forum.xda-developers.com/honor-9/how-to/revive-dead-honor-9-hardbrick-connect-t3846500
I don't wanna to spend money on dc-unlocker, so I will give the phone to Honor service, hoping they pass it in warranty. :fingers-crossed:
Click to expand...
Click to collapse
fuc*** GPU turbo
yz8_1337 said:
Hello, do you mind telling me how exactly you fixed your phone?
I'd highly appreciate it
Click to expand...
Click to collapse
1 Transfer the phone to USB com
2 we sew a board firmware
3 in Hsu prescribe imei
4 flashing firmware
This is briefly
Sorry for my English
Hi, first i got the G925F, runnning latest 7.0 Nougat bricked by my friend.
Restored with odin and it worked perfectly, but after a week i put a sim in it and did't worked, there was a message in status bar saying ''no signal''.
Next i googled it and checked the imei, the imei was 350000000006.
Rooted the phone with Odin.
Downloaded the Samsung Toot Pro and folowed a video on YouTube, downloaded a nv_data file.
Connected phone with writted my ''350000..06'' imei and writed nv_data next phone restarted.
I connected the phone again and opened ''Samsung Tool Pro''.
Next i just get to ''Repair'' section and writted my previous imei which i got from the back of my phone and hit the ''Repair'' button, phone restarted again.
So i got my Original imei, but there was the ''no signal'' error again there.
I inserted my sim and i got network lock screen. My phone was not locked to any network before restoring it.
Connected the phone again and there was a message saying ''if you are looking for ''repair network'', then you should use ''patch sertificate'' option.
I pressed patch sertificate but got an error.
But usually the 'Samsung Tool Pro' was recognizing my G925F's imei and this time there was only ''IMEI:'' and nothing more, just checked my imei and there is nothing.
I restored the phone again with Odin, now i have a circle with a line in my status bar, saying ''no signal'', u can see in the pictures.
Any help will be appreciated.
Sorry for my english.
Amid We said:
Hi, first i got the G925F, runnning latest 7.0 Nougat bricked by my friend.
Restored with odin and it worked perfectly, but after a week i put a sim in it and did't worked, there was a message in status bar saying ''no signal''.
Next i googled it and checked the imei, the imei was 350000000006.
Rooted the phone with Odin.
Downloaded the Samsung Toot Pro and folowed a video on YouTube, downloaded a nv_data file.
Connected phone with writted my ''350000..06'' imei and writed nv_data next phone restarted.
I connected the phone again and opened ''Samsung Tool Pro''.
Next i just get to ''Repair'' section and writted my previous imei which i got from the back of my phone and hit the ''Repair'' button, phone restarted again.
So i got my Original imei, but there was the ''no signal'' error again there.
I inserted my sim and i got network lock screen. My phone was not locked to any network before restoring it.
Connected the phone again and there was a message saying ''if you are looking for ''repair network'', then you should use ''patch sertificate'' option.
I pressed patch sertificate but got an error.
But usually the 'Samsung Tool Pro' was recognizing my G925F's imei and this time there was only ''IMEI:'' and nothing more, just checked my imei and there is nothing.
I restored the phone again with Odin, now i have a circle with a line in my status bar, saying ''no signal'', u can see in the pictures.
Any help will be appreciated.
Sorry for my english.
Click to expand...
Click to collapse
Find the correct combination (engineer) firmware for your device and firmware and flash it in Odin. It will repair your imei so you can make calls etc. However it won't repair your SN.
Helped somebody with this just last week and his works fine
callumbr1 said:
Find the correct combination (engineer) firmware for your device and firmware and flash it in Odin. It will repair your imei so you can make calls etc. However it won't repair your SN.
Helped somebody with this just last week and his works fine
Click to expand...
Click to collapse
"Engineer firmware"? Can u tell me what this means?
Amid We said:
"Engineer firmware"? Can u tell me what this means?
Click to expand...
Click to collapse
Repair firmware, it's used for a lot of repairs like imei corrupted, FRP locked, Remove Google account etc...
callumbr1 said:
Repair firmware, it's used for a lot of repairs like imei corrupted, FRP locked, Remove Google account etc...
Click to expand...
Click to collapse
How to download the ''engineer firmware''?
from where?
Amid We said:
How to download the ''engineer firmware''?
from where?
Click to expand...
Click to collapse
Google search and you fill find it easy, you need one to match your Android version, and BL.
What's your current firmware? And Android version?
callumbr1 said:
Repair firmware, it's used for a lot of repairs like imei corrupted, FRP locked, Remove Google account etc...
Click to expand...
Click to collapse
Android version 7.0
Build number: NRD90M.G925FXXU6ERF5
Amid We said:
Android version 7.0
Build number: NRD90M.G925FXXU6ERF5
Click to expand...
Click to collapse
Wait, I'll get you the firmware
callumbr1 said:
Google search and you fill find it easy, you need one to match your Android version, and BL.
What's your current firmware? And Android version?
Click to expand...
Click to collapse
okay
Amid We said:
i found this firmware, but it's FA50 -> [up_vnROM.net]_COMBINATION_OXA_FA50_G925FXXU5APK6_OXA5APK6.zip
it will not work, right?
Click to expand...
Click to collapse
It won't work! You need FA70 for Android N
callumbr1 said:
It won't work! You need FA70 for Android N
Click to expand...
Click to collapse
I can't find firmware higher than FA50, can you tell me how to get the coorect firm or give me link to it, please.
Amid We said:
I can't find firmware higher than FA50, can you tell me how to get the coorect firm or give me link to it, please.
Click to expand...
Click to collapse
I can't find it I'm searching, I can only find up to FA50. But I know somebody on telegram who flashed FA70 just last week. So I'm waiting for his reply
callumbr1 said:
I can't find it I'm searching, I can only find up to FA50. But I know somebody on telegram who flashed FA70 just last week. So I'm waiting for his reply
Click to expand...
Click to collapse
Okay, thank you. I'll wait for your response.
callumbr1 said:
I can't find it I'm searching, I can only find up to FA50. But I know somebody on telegram who flashed FA70 just last week. So I'm waiting for his reply
Click to expand...
Click to collapse
Can i downgrade to 6.0 and flash FA50, then check the system update and update to 7.0?
Amid We said:
Can i downgrade to 6.0 and flash FA50, then check the system update and update to 7.0?
Click to expand...
Click to collapse
I don't think you can downgrade from BLv6* and FA50 is lollipop so it won't work. As soon as I have the firmware I'll link it to you
callumbr1 said:
I don't think you can downgrade from BLv6* and FA50 is lollipop so it won't work. As soon as I have the firmware I'll link it to you
Click to expand...
Click to collapse
Hi, did you got the link?
Amid We said:
Hi, did you got the link?
Click to expand...
Click to collapse
I did but it's not the right one. It's for G928T
callumbr1 said:
I did but it's not the right one. It's for G928T
Click to expand...
Click to collapse
Anyways... Thank you.
I have one last question.
If i flash FA50, then original lollipop, will it work and will i be able to update to nougat?
Amid We said:
Anyways... Thank you.
I have one last question.
If i flash FA50, then original lollipop, will it work and will i be able to update to nougat?
Click to expand...
Click to collapse
You can't flash FA50, it won't boot. And you can't downgrade to lollipop. You can't downgrade BL that far. Hold on I have idea. Do you have telegram or WhatsApp? If so pm me
callumbr1 said:
You can't flash FA50, it won't boot. And you can't downgrade to lollipop. You can't downgrade BL that far. Hold on I have idea. Do you have telegram or WhatsApp? If so pm me
Click to expand...
Click to collapse
I have WhatsApp
Please add me or give me your number so i can add you