Looking for firmware - Huawei Mate 10 Questions & Answers

Does anybody have the update.zip for BLA-A09 8.0.0.119(C567)?

Erick-kewone said:
Does anybody have the update.zip for BLA-A09 8.0.0.119(C567)?
Click to expand...
Click to collapse
Received as an OTA, have not seen it anywhere else. You know it breaks night mode, light painting on camera? Security patch update, and supposedly fixes a lock screen issue that I've never had are about it. Better off staying on 112.

I could use any Bla-a09 firmware. I need it to repair my phone. I flashed the wrong system.img in fastboot

Erick-kewone said:
I could use any Bla-a09 firmware. I need it to repair my phone. I flashed the wrong system.img in fastboot
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=77248270&postcount=72
There are earlier builds in OP

ante0 said:
https://forum.xda-developers.com/showpost.php?p=77248270&postcount=72
There are earlier builds in OP
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-bla-a09-c567-usa-t3775258

Related

KII L22C569B130 looking for help.

Greetings! i'm currently looking for an android 6~7 rom for my huawei gr5 (compilation number on the title). I've found several but non of them matches the whole compilation and i'm afraid of bricking my phone, i've installed roms before but was on a nexus one (old old phone) so i'm basically new again. I would pretty much appreciate advice, links, and whatever might help me on this process. Thanks in advance.
There are lots of ROMs in ROMs and kernel section.
So any rom there with the kII l22 tag will work to me? Even if the c569b130 doesn't match? That's my biggest question.
kychesnko said:
So any rom there with the kII l22 tag will work to me? Even if the c569b130 doesn't match? That's my biggest question.
Click to expand...
Click to collapse
All of them will work if you have a firmware with no VoLTE.
kychesnko said:
So any rom there with the kII l22 tag will work to me? Even if the c569b130 doesn't match? That's my biggest question.
Click to expand...
Click to collapse
Those roms will work on your device...only caution is it should not be on volte..
Dont forget to Make a full backup and give it a try...
thanks for the advice!, what's VoLTE and how can i disable it?
kychesnko said:
thanks for the advice!, what's VoLTE and how can i disable it?
Click to expand...
Click to collapse
Voice over LTE. You can't simply disable it for custom Roms to work. You need to be on B350 and below because B360 and above has VoLTE.
Mine is B130 so i'm ready to flash?
kychesnko said:
Mine is B130 so i'm ready to flash?
Click to expand...
Click to collapse
Also marshmallow firmware is required..
for the marshmallow firmware update, i can't just flash a 6.0 room to update it? (was used to do that with a nexus one haha...)
kychesnko said:
for the marshmallow firmware update, i can't just flash a 6.0 room to update it? (was used to do that with a nexus one haha...)
Click to expand...
Click to collapse
No.. stock marshmallow firmware should be on your device..
You can update via OTA update.. Or you canupdate manually.
After that unlock bootloader..then flash twrp and then flash any rom you want to.
hassanjavaid8181 said:
No.. stock marshmallow firmware should be on your device..
You can update via OTA update.. Or you canupdate manually.
After that unlock bootloader..then flash twrp and then flash any rom you want to.
Click to expand...
Click to collapse
My phone currently has 5.1.1 android version (i never got a 6.0 update)
kychesnko said:
My phone currently has 5.1.1 android version (i never got a 6.0 update)
Click to expand...
Click to collapse
Did you try firmware finder??
hassanjavaid8181 said:
Did you try firmware finder??
Click to expand...
Click to collapse
I'm using it atm, there i just have to pic one with l22 right? without considering the C569?, i found this one "KII-L22C635B151CUSTC635D002", this one will work?
kychesnko said:
I'm using it atm, there i just have to pic one with l22 right? without considering the C569?, i found this one "KII-L22C635B151CUSTC635D002", this one will work?
Click to expand...
Click to collapse
No. You need to respect also the Cust version.
chrisleLP said:
No. You need to respect also the Cust version.
Click to expand...
Click to collapse
oh then there's no kernel for my device(at least on this firmware finder) it means i won't be able to flash any 5.X.X+ room?
kychesnko said:
oh then there's no kernel for my device(at least on this firmware finder) it means i won't be able to flash any 5.X.X+ room?
Click to expand...
Click to collapse
Have you tried updating using HiSuite?
chrisleLP said:
Have you tried updating using HiSuite?
Click to expand...
Click to collapse
yeah but no updates
kychesnko said:
yeah but no updates
Click to expand...
Click to collapse
Well I guess you can try from Firmware Finder. Worst case scenario is it will fail and your phone will boot normally.
chrisleLP said:
Well I guess you can try from Firmware Finder. Worst case scenario is it will fail and your phone will boot normally.
Click to expand...
Click to collapse
trying to install that with different custer? because there's no other firmware with the same custer as mine

Oreo OTAs

Close thread
Is there one for the S7 Active?
ThunderingLight said:
Is there one for the S7 Active?
Click to expand...
Click to collapse
Hasn't been found yet
Ok can you update the post once it has been found?
So, anyone flash this yet? I'm tempted but won't be back home to a PC (in case something goes wrong) until tonight. Just looking for some general impressions.
So, I did this. Pretty impressed with the overall device feel now, SE9 is nice . No hang ups other thank it took a long friggin' time, also remember this will WIPE all the data, so make sure to do a backup prior to. The initial/first phone setup is very iPhone-ish, imo.
bobloblaw1 said:
So, anyone flash this yet? I'm tempted but won't be back home to a PC (in case something goes wrong) until tonight. Just looking for some general impressions.
Click to expand...
Click to collapse
Be warned; this update is ONLY for SM-G930A firmware - it has a second-stage updater that blocks all other versions (including SM-G930T, which I myself tried). In other words, it is a carrier-specific update, folks.
PGHammer said:
Be warned; this update is ONLY for SM-G930A firmware - it has a second-stage updater that blocks all other versions (including SM-G930T, which I myself tried). In other words, it is a carrier-specific update, folks.
Click to expand...
Click to collapse
Will it work for sm-g930u at&t ????
mhdsweidan said:
Will it work for sm-g930u at&t ????
Click to expand...
Click to collapse
HIGHLY doubtful - not with a specific firmware check in place.
mhdsweidan said:
Will it work for sm-g930u at&t ????
Click to expand...
Click to collapse
You could try flashing G930A firmware in Odin and updating that way.
(Not sure it'll work though)
Sent from my SM-G955U using Tapatalk
If switching from u firmware back to att ql1 what version is capable of flashing att haven't been on carrier firmware since mm , wanna try Oreo
miko12312 said:
If switching from u firmware back to att ql1 what version is capable of flashing att haven't been on carrier firmware since mm , wanna try Oreo
Click to expand...
Click to collapse
What's your bootloader version? (5th from last letter in build number)
Sent from my SM-G955U using Tapatalk
FatalONEM8 said:
You could try flashing G930A firmware in Odin and updating that way.
(Not sure it'll work though)
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
If it weren't for this being a daily driver, I'd consider it. However, because it is, that's not an option. So I'll have to wait for either a neutral version or one that will work with the SM-G930T.
I am currently testing it out, I was on the latest U firmware and downloaded the latest ATT firmware, will update on how it goes
**EDIT
I am getting a model mismatch trying to flash G930AUCS4BRA1 (full odin file) on to a G930UUES4BRA1 firmware
micallan_17 said:
I am currently testing it out, I was on the latest U firmware and downloaded the latest ATT firmware, will update on how it goes
**EDIT
I am getting a model mismatch trying to flash G930AUCS4BRA1 (full odin file) on to a G930UUES4BRA1 firmware
Click to expand...
Click to collapse
Try using PrinceComsy Odin
Sent from my SM-G955U using Tapatalk
oreo otas
Goodnight friends, I started to update my phone to version 8.0 but it has more than 30 min in the option of patchin system files is normal or my step to better life is my s7.
Excuse me for my English since it is not my native language.
spend the fright of my life but finally install now approve to see how it works on android 8.0
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Has anyone been able to successfully downgrade back to RA1 after sideloading 8.0?
chewis559 said:
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Click to expand...
Click to collapse
Just reboot in recovery mode and wipe cache
chewis559 said:
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Click to expand...
Click to collapse
I had the same issue. The recommendation of rebooting into recovery and wiping Cache works.
:good:

update using firmware finder app

Anyone tried using the firmware update app to download the latest update ?
Kavitam said:
Anyone tried using the firmware update app to download the latest update ?
Click to expand...
Click to collapse
Emui 8.1 won't support ff update as of now.
miststudent2011 said:
Emui 8.1 won't support ff update as of now.
Click to expand...
Click to collapse
Download the latest version with firmware finder and then flash it with HuRUpdater or nocheck recovery. It should work
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
Download the latest version with firmware finder and then flash it with HuRUpdater or nocheck recovery. It should work
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
For that you need bootloader unlocked. I think he is trying to do that on stock unmodified .
youtuber123 said:
Download the latest version with firmware finder and then flash it with HuRUpdater or nocheck recovery. It should work
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
as of now theres is no 'no check recovery'
awells845 said:
as of now theres is no 'no check recovery'
Click to expand...
Click to collapse
There is : https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085 confirmed working on other devices from Huawei/Honor
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
There is : https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085 confirmed working on other devices from Huawei/Honor
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
Thanks.
Just a quick heads up for everyone thinking of using HuRUpdater for Honor 10 as I hard bricked my Honor 10 trying it out even by triple checking instructions carefully. It's definitely not compatible with it. Now I had to get it sent off for warranty repair. :crying:
awells845 said:
Thanks.
Just a quick heads up for everyone thinking of using HuRUpdater for Honor 10 as I hard bricked my Honor 10 trying it out even by triple checking instructions carefully. It's definitely not compatible with it. Now I had to get it sent off for warranty repair. :crying:
Click to expand...
Click to collapse
Can you still access to the bootloader or the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
Can you still access to the bootloader or the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
No nothing at all. Tried everything. It's completely hard bricked. I even tried getting it to boot into fastboot mode but the display doesn't even turn on. I had to beg my mum to let me buy a new smartphone. I'm thankfully getting the OnePlus 6 and will sell the Honor 10 when it comes back from repair to pay my mum back. The only thing stuck in my mind is wishing I had just used erecovery earlier.
awells845 said:
No nothing at all. Tried everything. It's completely hard bricked. I even tried getting it to boot into fastboot mode but the display doesn't even turn on. I had to beg my mum to let me buy a new smartphone. I'm thankfully getting the OnePlus 6 and will sell the Honor 10 when it comes back from repair to pay my mum back. The only thing stuck in my mind is wishing I had just used erecovery earlier.
Click to expand...
Click to collapse
Which build did you try ?
miststudent2011 said:
Which build did you try ?
Click to expand...
Click to collapse
I used HurUpdater v0.3.zip and downloaded all firmware files for COL-L29 8.1.0.1.0.4 and renamed the files to match the HurUpdater thread https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 Then I flashed in TWRP Recovery. It flashed successfully and I rebooted once complete. Then I got the black screen of death and tried to turn the phone on.
It's strange as the thread shows that it works for the P20 that has the same processor and confirmed by a user.
awells845 said:
I used HurUpdater v0.3.zip and downloaded all firmware files for COL-L29 8.1.0.1.0.4 and renamed the files to match the HurUpdater thread https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 Then I flashed in TWRP Recovery. It flashed successfully and I rebooted once complete. Then I got the black screen of death and tried to turn the phone on.
It's strange as the thread shows that it works for the P20 that has the same processor and confirmed by a user.
Click to expand...
Click to collapse
I think there is some issue with those build in firmware finder one of my friend tried .120 build with HurUpdater and it flashed but got different device build installed. Its showing device as fty-l29 with chipset-boston as build number and may security patch .
But when he tried with 104 his device also bricked and currently can't switch on. Does any one of you know a way to recover it.
miststudent2011 said:
I think there is some issue with those build in firmware finder one of my friend tried .120 build with HurUpdater and it flashed but got different device build installed. Its showing device as fty-l29 with chipset-boston as build number and may security patch .
But when he tried with 104 his device also bricked and currently can't switch on. Does any one of you know a way to recover it.
Click to expand...
Click to collapse
Ah okay, glad I'm not alone. I tried to search for solutions too but nothing. It would be ideal if Huawei/Honor had a similar tool like what OnePlus have for there devices because it's as simple as using an MSM Download Tool and installing the Qualcomm Drivers and then flashing all files in the firmware. Huawei/Honor could have one for Kirin devices.

IMEI lost after flash wrong firmware

Hi to all
A Spanish mate, who has a BKL-AL00 flashed a wrong firmware, a firmware for other variant, now he has lost both IMEI. Service center said that the only solution for this is changing the motherboard.
I've read in other Honor subforum, I don't remember which, someone bring a solution flash a previous firmware and wait for the OTA.
Anyone has boot, ramdisk and system for BKL-AL00 to flash it?
Or know any other solution to this?
Santi_SAZ said:
Hi to all
A Spanish mate, who has a BKL-AL00 flashed a wrong firmware, a firmware for other variant, now he has lost both IMEI. Service center said that the only solution for this is changing the motherboard.
I've read in other Honor subforum, I don't remember which, someone bring a solution flash a previous firmware and wait for the OTA.
Anyone has boot, ramdisk and system for BKL-AL00 to flash it?
Or know any other solution to this?
Click to expand...
Click to collapse
Boot to erecocery and try to connect to wifi and see if it is able to download the patch, i had same issue and fixed this way. Being AL10 it should be able to download the firmware
shashank1320 said:
Boot to erecocery and try to connect to wifi and see if it is able to download the patch, i had same issue and fixed this way. Being AL10 it should be able to download the firmware
Click to expand...
Click to collapse
Which patch? Do you mean an OTA?
Many thanks
Santi_SAZ said:
Which patch? Do you mean an OTA?
Many thanks
Click to expand...
Click to collapse
It will be full firmware similar to - BKL-L09C675BXYZ- Full.
If by any chance that appears on the screen, you can proceed with 100% guarantee it will solve the imei issue
shashank1320 said:
It will be full firmware similar to - BKL-L09C675BXYZ- Full.
If by any chance that appears on the screen, you can proceed with 100% guarantee it will solve the imei issue
Click to expand...
Click to collapse
I'll tell to him to do this
Thanks

Honor 9 hard-bricked after downgrading using HURUpdater

I recently picked up a Chinese variant (STF-AL10) Honor 9 and wen through the process of unlocking the bootloader, rooting and re-branding to the European variant (STF-L09). All good. Was able to flash the latest ROM (STF-L09C432B378) using HURUpdater. All good except the 2 capacitive keys not working. Saw that there was a potential fix with an updated Kernel for build 366. So.... I tried flashing STF-L09C432B366 with HURUpdater. The flash appeared to be successful (no error messages except for the a couple that are expected apparently). But the phone was dead right after I tried rebooting from TWRP. Absolutely none of the reboot button combinations work.
Has anyone experienced this before? The seller is promising to fix or replace the phone so I've sent it back. But I'm still interested in finding out what went wrong. Are there any pitfalls when downgrading -- I only went from 378 to 366. My impression was that HURUpdater was fairly reliable. I'm wondering if the the B666 ROM was corrupted. I'm still surprised that I ended up with a hard-bricked phone.
Thanks.
SirShnike said:
I recently picked up a Chinese variant (STF-AL10) Honor 9 and wen through the process of unlocking the bootloader, rooting and re-branding to the European variant (STF-L09). All good. Was able to flash the latest ROM (STF-L09C432B378) using HURUpdater. All good except the 2 capacitive keys not working. Saw that there was a potential fix with an updated Kernel for build 366. So.... I tried flashing STF-L09C432B366 with HURUpdater. The flash appeared to be successful (no error messages except for the a couple that are expected apparently). But the phone was dead right after I tried rebooting from TWRP. Absolutely none of the reboot button combinations work.
Has anyone experienced this before? The seller is promising to fix or replace the phone so I've sent it back. But I'm still interested in finding out what went wrong. Are there any pitfalls when downgrading -- I only went from 378 to 366. My impression was that HURUpdater was fairly reliable. I'm wondering if the the B666 ROM was corrupted. I'm still surprised that I ended up with a hard-bricked phone.
Thanks.
Click to expand...
Click to collapse
Hello, for me happend quite the same thing, I tried to downgrade my original STF-L09 from b378 to b368 with HURUpdater and right after rebooting from TWRP, where I chose reboot to recovery, the phone died. Because it is in warranty I sent it to service last week. So I'm looking forward to what they'll say to me
Regards.
You can not lower the firmware version if your firmware is gt Turbo
Your phone will fall into the state of usb ser
You can restore it but it costs money
I reconstructed my phone from this brick myself
gaguga said:
You can not lower the firmware version if your firmware is gt Turbo
Your phone will fall into the state of usb ser
You can restore it but it costs money
I reconstructed my phone from this brick myself
Click to expand...
Click to collapse
What was the first firmware with gt Turbo? b377? Previously I successfully downgrade from b376 to b368.
btw your post is very useful!
Yeah, that explains a lot. What's been the best fix so far for the capacitive buttons problem? The one route I've seen is flashing the kernel file in fastboot mode from one of the patched builds (366, etc.) Any other ways that work?
gaguga said:
You can not lower the firmware version if your firmware is gt Turbo
Your phone will fall into the state of usb ser
You can restore it but it costs money
I reconstructed my phone from this brick myself
Click to expand...
Click to collapse
How did you do that? Dc phoenix?
Midhon58 said:
How did you do that? Dc phoenix?
Click to expand...
Click to collapse
no, not phoenix
gaguga said:
no, not phoenix
Click to expand...
Click to collapse
IDT?
oslo83 said:
IDT?
Click to expand...
Click to collapse
Yes
gaguga said:
Yes
Click to expand...
Click to collapse
What does it mean IDT?
Thanks.
modest.young said:
What does it mean IDT?
Thanks.
Click to expand...
Click to collapse
Special program
gaguga said:
Yes
Click to expand...
Click to collapse
gaguga said:
You can not lower the firmware version if your firmware is gt Turbo
Your phone will fall into the state of usb ser
You can restore it but it costs money
I reconstructed my phone from this brick myself
Click to expand...
Click to collapse
My phone came back from service center after bricking it during downgrading from b378 to b368 with changed motherboard. So unlocking the bootloader via HCU client was needed. Unlocking succeeded, so now I'm going to flash new treble ROMs.
modest.young said:
My phone came back from service center after bricking it during downgrading from b378 to b368 with changed motherboard. So unlocking the bootloader via HCU client was needed. Unlocking succeeded, so now I'm going to flash new treble ROMs.
Click to expand...
Click to collapse
And I like you))))
https://forum.xda-developers.com/showpost.php?p=78564317&postcount=1081
cioce said:
I try to flash B376 (already flashed some months ago) over B378 and now it's HARDBRICKED
like this https://forum.xda-developers.com/honor-9/how-to/revive-dead-honor-9-hardbrick-connect-t3846500
I don't wanna to spend money on dc-unlocker, so I will give the phone to Honor service, hoping they pass it in warranty. :fingers-crossed:
Click to expand...
Click to collapse
fuc*** GPU turbo
yz8_1337 said:
Hello, do you mind telling me how exactly you fixed your phone?
I'd highly appreciate it
Click to expand...
Click to collapse
1 Transfer the phone to USB com
2 we sew a board firmware
3 in Hsu prescribe imei
4 flashing firmware
This is briefly
Sorry for my English

Categories

Resources