Related
Hello.
I have a motorola atrix 4g AT&T Gingerbread 2.3.6.
Yesterday a received a new notification about a new upgrade. so i acepted.
then the phone turned off and i received this message.
failed to boot 1
When i push vol+ and power i read this
failed to boot 1
PwrReason: Usb_cable
Starting Fastboot Protocol.
when i push vol- and power i can read starting NVflash but the phone turn off after 1 second.
if i connect the phone to my pc, it don´t recognise.
Any help???
Cheers from Colombia. :good:
Your phone is hard bricked. Only warranty service from Motorola will solve it.
saiftheboss7 said:
Your phone is hard bricked. Only warranty service from Motorola will solve it.
Click to expand...
Click to collapse
I would try 236 sbf first rsd.first maybe install did not take seen that in mine before.
Is your phone unlocked?
thanks
diegotalla said:
Is your phone unlocked?
Click to expand...
Click to collapse
Hello.
My phone isn´t unlocked. :crying:
Povelio said:
Hello.
My phone isn´t unlocked. :crying:
Click to expand...
Click to collapse
try pressing Vol+ and power. If it says "starting RDS protocol" you are not so unlucky. Connect the phone (in RDS mode) to the pc and start the windows application called RDS Lite v5.6 or 5.7 (I tested these). Then your phone will be recognised by RDS Lite and you'll be able to flash a full sbf (full image of the complete system - like a factory reset). You can find your correct sbf from here: http://www.das8nt.com/sbffiles.html
hope to help
thanks
Thanks alberto88a
I can´t go into RSD only flashboot protocol support.
That´s very werid cause was an "official update"
I´m thinking in run a virtual machine with ubuntu and try to plug it. Then try to run a fruitcake :cyclops:
R: Failed to boot 1. Please help me!
Povelio said:
Thanks alberto88a
I can´t go into RSD only flashboot protocol support.
That´s very werid cause was an "official update"
I´m thinking in run a virtual machine with ubuntu and try to plug it. Then try to run a fruitcake :cyclops:
Click to expand...
Click to collapse
I used fastboot under windows...search for fastboot.exe and run it from a terminal ms-dos..
Sent from my MB860 using xda premium
alberto88a said:
I used fastboot under windows...search for fastboot.exe and run it from a terminal ms-dos..
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
when i do that the ms-dos said "waiting for the device" i installed all the drivers and i run it on win 7, win 8 and win xp. Thats i´m trying with ubuntu no drivers need for mount a device.
I´m very bored without an smartphone lol
Your phone is not hardbricked. Rsd recognise your device you will flash with the same firmware you have after the problem. If that not resollve your problem you need to flash the unlock sbf via rsd. Again using rsd lite flash the sbf original you have after the failed to bot 1. If the failed to boot 1 still there you need to flash via rsd the unlock sbf.
R: Failed to boot 1. Please help me!
Povelio said:
when i do that the ms-dos said "waiting for the device" i installed all the drivers and i run it on win 7, win 8 and win xp. Thats i´m trying with ubuntu no drivers need for mount a device.
I´m very bored without an smartphone lol
Click to expand...
Click to collapse
Are you sure the device is connected in fastboot mode? Try fastboot devices before other operations...anyway if the phone goes into fastboot mode you are safe! It's just a driver problem! Keep me updated
Sent from my MB860 using xda premium
Thanks
diegotalla said:
Your phone is not hardbricked. Rsd recognise your device you will flash with the same firmware you have after the problem. If that not resollve your problem you need to flash the unlock sbf via rsd. Again using rsd lite flash the sbf original you have after the failed to bot 1. If the failed to boot 1 still there you need to flash via rsd the unlock sbf.
Click to expand...
Click to collapse
Thanks diego. My pc can\t recognize the phone, thats the problem and i dowloaded the drives from motorola.:crying:
thanks
alberto88a said:
Are you sure the device is connected in fastboot mode? Try fastboot devices before other operations...anyway if the phone goes into fastboot mode you are safe! It's just a driver problem! Keep me updated
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
i only have 1 option "starting fastboot protocol support" i downloaded a million of drivers but nothing work. :crying: :crying:
Povelio said:
i only have 1 option "starting fastboot protocol support" i downloaded a million of drivers but nothing work. :crying: :crying:
Click to expand...
Click to collapse
try these drivers: http://dottech.org/downloads/MotoHelper_2.1.32_Driver_5.4.0.exe
then if you succeed try moto-fastboot http://forum.xda-developers.com/showthread.php?t=1138092
thanks
alberto88a said:
try these drivers: http://dottech.org/downloads/MotoHelper_2.1.32_Driver_5.4.0.exe
then if you succeed try moto-fastboot http://forum.xda-developers.com/showthread.php?t=1138092
Click to expand...
Click to collapse
Thanks alberto88a. Infortunatly the pc don´t recongnized. In a couple of hours i´ll try on win 8 whit this driver. I really aprecciated your help.:highfive:
R: Failed to boot 1. Please help me!
Povelio said:
Thanks alberto88a. Infortunatly the pc don´t recongnized. In a couple of hours i´ll try on win 8 whit this driver. I really aprecciated your help.:highfive:
Click to expand...
Click to collapse
Try an other pc or maybe an other usb port...don't you hear any sound while connecting? If yes your phone is at least seen by the pc and you can try to install missing drivers from control panel
Sent from my MB860 using xda premium
thanks
alberto88a said:
Try an other pc or maybe an other usb port...don't you hear any sound while connecting? If yes your phone is at least seen by the pc and you can try to install missing drivers from control panel
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Only on Win xp i got the sound. (in then out sound). It´s a very weird situation cause i downloaded the latest drivers
Povelio said:
Only on Win xp i got the sound. (in then out sound). It´s a very weird situation cause i downloaded the latest drivers
Click to expand...
Click to collapse
maybe you need to search your device and install drivers manually from control panel and "hardware". I think it's only this driver problem that keep you from flashing a full rom...
thanks
alberto88a said:
maybe you need to search your device and install drivers manually from control panel and "hardware". I think it's only this driver problem that keep you from flashing a full rom...
Click to expand...
Click to collapse
Well i think the usb port is damaged, i used 6 differents pc without results:crying:
Thanks To All
Thanks to all guys for the help, finally i change the phone for a motorola photon, a guy said that he can make a special cable to repair. So moderator you can close this. THANKS TO ALL FROM CALI-COLOMBIA.:good::good::highfive:
Hello guys,
I know there's probably tons of theards, but I'm sure I read most of them and I'm still with a problem.
I'm trying to unlock my bootloader on my Xperia Go (ST27i) and I can't get into fastboot mode!
I've installed Android SDK, I've install the drivers from Flashtool, I still can't get it working.
What to you guys recommend me? Uninstall everything and install again (Will that even work?)
Thank you,
Kript3r.
Kript3r said:
Hello guys,
I know there's probably tons of theards, but I'm sure I read most of them and I'm still with a problem.
I'm trying to unlock my bootloader on my Xperia Go (ST27i) and I can't get into fastboot mode!
I've installed Android SDK, I've install the drivers from Flashtool, I still can't get it working.
What to you guys recommend me? Uninstall everything and install again (Will that even work?)
Thank you,
Kript3r.
Click to expand...
Click to collapse
And the OS on your computer is?
ChikeD said:
And the OS on your computer is?
Click to expand...
Click to collapse
Win7 x64
Kript3r said:
Win7 x64
Click to expand...
Click to collapse
Have you installed fastboot drivers as well?
What happen when you connect in fastboot mode then? Post the log from flashtool while you attamp to connect in fastboot mode.
ChikeD said:
And the OS on your computer is?
Click to expand...
Click to collapse
ChikeD said:
Have you installed fastboot drivers as well?
What happen when you connect in fastboot mode then? Post the log from flashtool while you attamp to connect in fastboot mode.
Click to expand...
Click to collapse
Well I guess I forgot to metion, I'm a totally newbie on this...
So I need to have flashtool opened while connecting the phone? If that's it I'm so stupid...
Kript3r said:
Well I guess I forgot to metion, I'm a totally newbie on this...
So I need to have flashtool opened while connecting the phone? If that's it I'm so stupid...
Click to expand...
Click to collapse
No it's not a mus to have flashtool open if you are using fastboot from command line, I just want to see if it's detected in fastboot mode (notification led should turn blue)
ChikeD said:
No it's not a mus to have flashtool open if you are using fastboot from command line, I just want to see if it's detected in fastboot mode (notification led should turn blue)
Click to expand...
Click to collapse
It doesn't turn blue, it's just goes to the battery screen...
Kript3r said:
It doesn't turn blue, it's just goes to the battery screen...
Click to expand...
Click to collapse
First the phone must be turned off and disconnected from the USB cable, then you press volume up and connect the USB cable while you holding it dwn.
Another way is to enabled USB debugging in developer options, connect the phone to the pc, then in flashtool click the flash icon, select fastboot, and in the window the comes up click reboot into fastboot (via adb).
Try both methids.
ChikeD said:
First the phone must be turned off and disconnected from the USB cable, then you press volume up and connect the USB cable while you holding it dwn.
Another way is to enabled USB debugging in developer options, connect the phone to the pc, then in flashtool click the flash icon, select fastboot, and in the window the comes up click reboot into fastboot (via adb).
Try both methids.
Click to expand...
Click to collapse
Both methods didn't work...
What it could be? I've check and I've the drivers correctly installed.
Kript3r said:
Both methods didn't work...
What it could be? I've check and I've the drivers correctly installed.
Click to expand...
Click to collapse
IDK, I can get my phone in fastboot mode for a few seconds connecting it to the charger and not the PC.
What's in flashtool log?
ChikeD said:
IDK, I can get my phone in fastboot mode for a few seconds connecting it to the charger and not the PC.
What's in flashtool log?
Click to expand...
Click to collapse
12/005/2014 00:05:28 - INFO - Please wait device is rebooting into fastboot mode (via ADB)
12/005/2014 00:05:29 - INFO - Device will soon enter fastboot mode
12/005/2014 00:05:29 - INFO - Device disconnected
12/005/2014 00:05:56 - INFO - Device connected with USB debugging on
What is could be? It's really weird in my opinion...
Kript3r said:
12/005/2014 00:05:28 - INFO - Please wait device is rebooting into fastboot mode (via ADB)
12/005/2014 00:05:29 - INFO - Device will soon enter fastboot mode
12/005/2014 00:05:29 - INFO - Device disconnected
12/005/2014 00:05:56 - INFO - Device connected with USB debugging on
What is could be? It's really weird in my opinion...
Click to expand...
Click to collapse
Yup very weird.
What firmware version you have? and can you connect in flash mode?
ChikeD said:
Yup very weird.
What firmware version you have? and can you connect in flash mode?
Click to expand...
Click to collapse
Flashmode works fine, I already flash it with a unbranded version and it still doesn't work.
Firmware version is 6.2.A.0.400
I tried everything that I know...
Kript3r said:
Flashmode works fine, I already flash it with a unbranded version and it still doesn't work.
Firmware version is 6.2.A.0.400
I tried everything that I know...
Click to expand...
Click to collapse
.400 the worse firmware ever.
Have you tried repair with PC Companion or SUS? What version you get from Sony?
ChikeD said:
.400 the worse firmware ever.
Have you tried repair with PC Companion or SUS? What version you get from Sony?
Click to expand...
Click to collapse
I was using the last version I can get which was 6.2.A.1.100 (can't get any higher).
But I flash it with other version to test it, and still doesn't work...
Kript3r said:
I was using the last version I can get which was 6.2.A.1.100 (can't get any higher).
But I flash it with other version to test it, and still doesn't work...
Click to expand...
Click to collapse
Any particular reason you need fastboot?
You cannot flash custom kernels and non stock based ROMs but you can still root it.
ChikeD said:
Any particular reason you need fastboot?
You cannot flash custom kernels and non stock based ROMs but you can still root it.
Click to expand...
Click to collapse
I want to unlock my bootloader, I need to access fastboot to do it (I believe that's the only way).
Kript3r said:
I want to unlock my bootloader, I need to access fastboot to do it (I believe that's the only way).
Click to expand...
Click to collapse
I asked for the reason, and if its "to unlock my bootloader" you can forget about it alltogether. Unlocked boot loader by itself has no advantage over lokecked bootloader.
ChikeD said:
I asked for the reason, and if its "to unlock my bootloader" you can forget about it alltogether. Unlocked boot loader by itself has no advantage over lokecked bootloader.
Click to expand...
Click to collapse
Well I want to install custom roms and newer versions, but since my bootloader is locked I can't do it...
Bump, still need some help please.
Thank you!
Hi all,
by cons for several weeks I've a concern with my redmi Note 2 and I can't find the answer to my problem on the forum or even the Internet.
Since the last update 7.2.2 (global) I have the Recovery MIUI who crushed the TWRP. I changed to test 6.3.17. The update to the .24 went wrong and I don't know why. Since the phone is bootloop. But the problem is that my phone is not recognized by any PC. I tried several PCs, several cables, several drivers, with or without the Fastboot, unable to connect. Therefore impossible to load a new version. I don't think it's material problem because the phone recharge well with a cable to the socket.
Is there another handling or debug decision to restart the phone? I'm in France for information.
thank you in advance if you can point me to a solution !
Hope someone can help me.
Manu
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
DarthJabba9 said:
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Click to expand...
Click to collapse
manu33xtro said:
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
Click to expand...
Click to collapse
Ok - but have you tried the Mediatek SP Flash Tool?
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
DarthJabba9 said:
Ok - but have you tried the Mediatek SP Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
Click to expand...
Click to collapse
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Yes you're right : every 10s the phone vibrate...
DarthJabba9 said:
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Click to expand...
Click to collapse
manu33xtro said:
Yes you're right : every 10s the phone vibrate...
Click to expand...
Click to collapse
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
DarthJabba9 said:
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
Click to expand...
Click to collapse
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
DarthJabba9 said:
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Click to expand...
Click to collapse
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
manu33xtro said:
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
Click to expand...
Click to collapse
manu33xtro said:
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
Click to expand...
Click to collapse
Perhaps you might want to describe what exactly happens when do you what exactly?
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
DarthJabba9 said:
Perhaps you might want to describe what exactly happens when do you what exactly?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
Click to expand...
Click to collapse
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
I will try again this night to be sure with all steps one by one. And I will also try with ACER tablet I and runs Android 5.1. Maybe it will be recognized.
Otherwise I also tried to pass a Linux PC as a last resort.
Thanks again for your help.
DarthJabba9 said:
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Click to expand...
Click to collapse
manu33xtro said:
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
Click to expand...
Click to collapse
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Hum good question. In fact I don't know. I'll ask the MIUI forum.
I got home late from work so I don't do tests tonight, I'd see it all tomorrow including the connection with my tablet ...
Thanks
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
Click to expand...
Click to collapse
I don't think it is a crack on the USB plug. It seems to me to be a low-level driver problem - ie, the drivers on the phone that are active when the phone is not (fully) booted up. I don't have the right terminology for these drivers, but they are possibly part of the bootloader. If that is the problem, then I don't know how you would solve this problem.
Hi, I literally f**ked up my root progress with patched boot.img.
I'm using a phone that is a clone of Panasonic Eluga x1 Pro. I decided to root it with magisk patched root.img. Simply flashed the patched img with adb using "fastboot flash boot patched_boot.img" and ran "fastboot restart" to restart it to my system, it didn't booted up since. I can't go in recovery mode, the phone is literally not giving or receiving anything.
May be your phone was bricked due to a wrong patched img
abessi sofiene said:
May be your phone was bricked due to a wrong patched img
Click to expand...
Click to collapse
Is there any chance that I can fix it?
Francislukacher said:
Is there any chance that I can fix it?
Click to expand...
Click to collapse
When you put charger is there charging animation on the screen?
abessi sofiene said:
When you put charger is there charging animation on the screen?
Click to expand...
Click to collapse
No, it doesn't show any charging animation, when I connect my phone to my PC, it shows it's a MediaTek COM Port.
good luck with edl mode
Francislukacher said:
No, it doesn't show any charging animation, when I connect my phone to my PC, it shows it's a MediaTek COM Port.
Click to expand...
Click to collapse
Try to flash again with official rom
Guan Yu said:
good luck with edl mode
Click to expand...
Click to collapse
Actually, I'm a beginner about these things, the phone runs on Helio P60, with Oreo 8.1. What can I do about that? It was my main phone..
abessi sofiene said:
Try to flash again with official rom
Click to expand...
Click to collapse
I tried that with SP Flash Tool with stock rom of course. I'm trying to plug in my phone but the SP Flash Tool don't wanna flash it, i don't know why. (I have auth and da files too)
By the way, I ran the SP Flash Tool, Format All + Download, when i plug in my phone holding VolUP, it just throws "STATUS_ERR (0xC0010001)" thing. I don't know what to do at this point.
Francislukacher said:
I tried that with SP Flash Tool with stock rom of course. I'm trying to plug in my phone but the SP Flash Tool don't wanna flash it, i don't know why. (I have auth and da files too)
Click to expand...
Click to collapse
make sure the pc recognised it , open device manager on your pc to check
Guan Yu said:
make sure the pc recognised it , open device manager on your pc to check
Click to expand...
Click to collapse
In the Device Manager on PC, it simply says "MediaTek Preloader USB VCOM (Android) (COM12)" about my phone i think.
I don't wanna be that guy but your phone is, think of a person who's alive but can't speak, move, nod, anything, for itself.
However, you may have luck, because they're still repairable, but your best bet is take it back and play dumb, they don't have the time/willingness/resources to check whether you messed with it. Went to bed, woke up, i swear, i dunno, it was like that, tsk, tsk, tsk...
Lol
Francislukacher said:
In the Device Manager on PC, it simply says "MediaTek Preloader USB VCOM (Android) (COM12)" about my phone i think.
Click to expand...
Click to collapse
enter fastboot devices , if the computer recognizes your device, flash the stock rom, otherwise try to find a way to get into edl mode on youtube until the computer recognizes your device. EDL is just a 2nd bootloader (maybe?)
culiacanazo said:
I don't wanna be that guy but your phone is, think of a person who's alive but can't speak, move, nod, anything, for itself.
However, you may have luck, because they're still repairable, but your best bet is take it back and play dumb, they don't have the time/willingness/resources to check whether you messed with it. Went to bed, woke up, i swear, i dunno, it was like that, tsk, tsk, tsk...
Lol
Click to expand...
Click to collapse
The phone is quite old actually, i don't know if they will do it.
Guan Yu said:
enter fastboot devices , if the computer recognizes your device, flash the stock rom, otherwise try to find a way to get into edl mode on youtube until the computer recognizes your device. EDL is just a 2nd bootloader (maybe?)
Click to expand...
Click to collapse
I ran "fastboot devices" on CMD screen when it connects as "MediaTek Preloader USB VCOM (Android) (COM12)", nothing is happening.
Francislukacher said:
I ran "fastboot devices" on CMD screen when it connects as "MediaTek Preloader USB VCOM (Android) (COM12)", nothing is happening.
Click to expand...
Click to collapse
so you havent entered edl
Try to disconnect battery if it is removable and connect phone to pc
Can you send a screenshot
abessi sofiene said:
Try to disconnect battery if it is removable and connect phone to pc
Can you send a screenshot
Click to expand...
Click to collapse
No, my battery is not removable. What screenshot do u wanted?
Francislukacher said:
No, my battery is not removable. What screenshot do u wanted?
Click to expand...
Click to collapse
Sp flash tool error screenshot
Hello i wanted to root and unlock my SM-T220 and did all of that and then tried to remove the warning by overwriting up_param from termux
That resulted in bootlooping with only backlight on
Then i tried recovering using MTK SP Flash but now it only shows up as MTK usb device cant even get to bootloader, is the tablet toast?
Can you boot it to EDL?
You shouldn't have done it with Termux anyways since it was fully booted from the beginning.
sandorex said:
Hello i wanted to root and unlock my SM-T220 and did all of that and then tried to remove the warning by overwriting up_param from termux
That resulted in bootlooping with only backlight on
Then i tried recovering using MTK SP Flash but now it only shows up as MTK usb device cant even get to bootloader, is the tablet toast?
Click to expand...
Click to collapse
For now, It is toast, Are there any guides on how to unbrick it?
Someone Anyone said:
You shouldn't have done it with Termux anyways since it was fully booted from the beginning.
Click to expand...
Click to collapse
The guide said that
yngStigg said:
For now, It is toast, Are there any guides on how to unbrick it?
Click to expand...
Click to collapse
Well i followed the only guide i could find and bricked it further it seems
Only idea i have now is to open it if i can and disconnect the battery
sandorex said:
Well i followed the only guide i could find and bricked it further it seems
Only idea i have now is to open it if i can and disconnect the battery
Click to expand...
Click to collapse
Why did you not follow a guide from the beginning?
Someone Anyone said:
Can you boot it to EDL?
Click to expand...
Click to collapse
Does this tablet even have EDL? It's mediatek
yngStigg said:
Why did you not follow a guide from the beginning?
Click to expand...
Click to collapse
I did this is how i got into this but the guide screwed me over
sandorex said:
Does this tablet even have EDL? It's mediatek
Click to expand...
Click to collapse
Well most Samsung devices have one.
Disconnected the battery but its the same
I could not find any way to restart it or get anything on display it just displays as MTK Device and SP flash tool gives me an error so in the drawer it goes for now
sandorex said:
I could not find any way to restart it or get anything on display it just displays as MTK Device and SP flash tool gives me an error so in the drawer it goes for now
Click to expand...
Click to collapse
Sad
That's why I don't mod new / expensive devices, I only mod old ones.
yngStigg said:
Sad
That's why I don't mod new / expensive devices, I only mod old ones.
Click to expand...
Click to collapse
It was painfully slow but oh well maybe ill fix it someday
sandorex said:
It was painfully slow but oh well maybe ill fix it someday
Click to expand...
Click to collapse
Did you void the warranty, Yet?
yngStigg said:
Did you void the warranty, Yet?
Click to expand...
Click to collapse
I unlocked the bootloader, i've opened the device up so i think i did
Does the screen come on at all when you power it up?
If it does, put it in download mode:
Power device off completely with no cables connected
Hold both Volume buttons, do not press Power, connect USB cable from PC
Device should start in download mode
Reflash firmware using Odin
sandorex said:
I unlocked the bootloader, i've opened the device up so i think i did
Click to expand...
Click to collapse
V0latyle said:
Does the screen come on at all when you power it up?
If it does, put it in download mode:
Power device off completely with no cables connected
Hold both Volume buttons, do not press Power, connect USB cable from PC
Device should start in download mode
Reflash firmware using Odin
Click to expand...
Click to collapse
He said he can't get into bootloader soooo, This may do something tho.
yngStigg said:
He said he can't get into bootloader soooo, This may do something tho.
Click to expand...
Click to collapse
Samsung devices don't have a bootloader mode