Stuck on factory mode in micromax A311 - Micromax Canvas Nitro A310/A311

I was able to custom flash the ROM of MicroMax A311 and in normal case, i would be able to get back to normal working state but it didn't happen that way.After pressing on the power button, the "factory mode" text did keep sliding from bottom to top and the interface appeared with "modem and up and down" text. I searched online for its solution and was able to get one but when i tried connecting my phone in the state it was in later case( i was told to do so) but my PC won't detect my phone and everything until now just went into vain. So, Can anyone help me overcome this issue? I would really appreciate that. Thanks....

Related

TOUCH pro "STUCK" wont load HELP.

I HAVE THE SPRINT TOUCH PRO STOCK ROM.
A WHILE AGO I REGRETABLY INSTALLED [ezInput 2.1]
[http://mylostblog.altervista.org/software/freeware/per-htc/htc-freeware-htc-keyboard-ezinput-21]
WHEN I DID THE SOFT RESET MY DEVICE GOT STUCK ON THE "TOUCH PRO SCREEN WITH Rom/Radio... info at the bottom.
I've tried several different things to try and make it work.
1. took out the battery and restart.
2. take out the memory card (where i installed) then baterry and restart
3. tried to connect to laptop (nothing)
notes: power button doesn't do anything
when i call my phone the LED light flickers for incoming call,
but, cannot answer.
tried searching for solutions on xda
http://forum.xda-developers.com/showthread.php?t=446719
i dont have "insurance" so i just cant get a new one
CAN ANYONE HELP ME WITH THIS PROBLEM???
NEW MESSAGE POPPED UP: the device is unable to boot beacuse either you have turned off the device incorrectly or tried to install an application from an untrusted source. press the volume up to reset your device or press any other button to cancel. this operation will delete all your personal data and restore the device to its factory settings.
You have to hard reset the device, like the message stated. If that doesn't do the trick, boot it in tricolor mode and reflash the ROM.
<SOLVED>
Problem solved. Factory reset. Good thing i had back-up.

Bricked CAT S50 after general instability

Hello and thank you for anyone bothering to read this.
I got a CAT S50 and was experiencing a bit of instability lately.
I've run LTE_S0201121.0_S50_0.023.00 without a hitch for a while, then it decided to crash several applications, from google play to any other app open.
That's when I decided to do a factory reset and see if it would help. Performed the rest without a hitch, but the errors kept coming back. At one point, the screen went black. I knew the phone was on because the backlit was working. I hard-reseted it (hold the power button for 30 seconds or more) and rebooted. The phone froze on the CAT splash logo screen and that's when I hard-reset it again. But when I tried to turn it on, the phone simply refused to work. No vibrate, sounds or anything. It's dead.
When I plug it on the computer's USB, the PC makes a sound as if it detected the device, but when I go to the device manager, I get this QHSUSB_BULK with the yellow exclamation mark
I want to know if it is possible to unbrick this phone and if so, if there is a tutorial or if someone can direct me to the correct procedure. I looked everywhere for the ftf file for this phone to attempt this with flashtool, but I simply can't find it.
ANY help of any form is greatly appreciated.
Sadly I had the same thing happen to me, just a black screen. It decided to delete recovery mode or I just cant get to it.
Power Off the Phone,
While pressing Press Vol Down + Cam Button insert a Powersource -- hold down Vol Down + Cam
Recoverymenu should start
Then flash the original rom via ADB Sideload or SD Card.
btw. i have flashed the LTE_S0201121.0_S50_0.023.00 but i want test older ROMs!
can anyone link or upload an older ROM ?
Guy i have the same issue, can you please help me
I got the same problem I search lots place but still nothing then normal update rom anyone can help?

Canvas Knight A350 Touch Screen Stopped Working Suddenly

hi,
Suddenly out of the blue touch on the phone stopped working. No damage to the phone i mean it was working perfectly and just the other minute touch is non responsive.
Tired the restart tried to going to recovery mode but when i press power button to enter it doesnt respond i can scroll through all the options in recovery mode but cannot select anyone using the power button.
Power button works normally everywhere else. First question can it caused using a software update or something??? If yes how i roll it back as cant access the phone at all.
Secondly if it requires the touch replacement I can get it done from service centre. But I neeeeeeeed to have the backup of the phone especially the pictures and videos... How can i do that without having the access to anything on the phone.
is there a software or something which I can install on my pc and it can detect the device and take the backup of it completly????
Any help here would be greatly appreciated?

P20 lite stuck on startup screen

Guys I need help ...this morning my phone restarted while charging and got stuck on huawei logo screen. i tried different combinations of Power + Volume up and down buttons but it didnt go to any other screen. then i installed hisuite on my PC and connected to my phone through USB cable, and holding volume down button i got to this screen which says FAST BOOT&RESCUE MODE and further reads "Phone Locked" "FRP Lock" in the end below Android logo.
i want to access my phone contents and get backup as I have important files to recover. Please I need some help with detailed step by step procedure to help me get through without damaging my phone or its content. I am hoping some nice techie can write me the steps needed to be taken considering I am a complete noob.
Try forcing your way into the recovery and clearing cache
Vol up + power without having it plugged in
Just keep it pressed for 1 min + if you have to until you see the recovery
When the phone vibrates and turns on let go of the power button so it won't cycle
Zep0th said:
Try forcing your way into the recovery and clearing cache
Vol up + power without having it plugged in
Just keep it pressed for 1 min + if you have to until you see the recovery
When the phone vibrates and turns on let go of the power button so it won't cycle
Click to expand...
Click to collapse
hi buddy,
i tried but no luck
Any news? I got one in the same condition. When its in eRecovery and i try to update it shows "can't get update info(or something like that)", it doesn't have factory reset button available, it doesn't have wipe button available. When I put it in fastboot, it shows Phone "Locked" and "FRP Lock".
Wtf do I do with this brick?
Thank you in advance! ( Be aware guys! I was scammed with it on the internet - full box, like new, and it doesn't even get into android)
Hi mate
Did you solve this in the end?
John Smith234 said:
Hi mate
Did you solve this in the end?
Click to expand...
Click to collapse
no mate ... the phone is not usable anymore as i couldn't get it fixed from anywhere nor found any solution online
ahmowais said:
i want to access my phone contents and get backup as I have important files to recover.
Click to expand...
Click to collapse
Hi,
have you tried Emergency Backup?
- Turn off your phone and connect it to your computer using USB cable. Press and hold the Volume Up and Power Button for 15 seconds, until the device restarts and enters the eRecovery mode. Select "Emergency backup" . Works on EMUI 9.1 only!
IMO theres no other way to save your data...
ahmowais said:
no mate ... the phone is not usable anymore as i couldn't get it fixed from anywhere nor found any solution online
Click to expand...
Click to collapse
That sucks, I think I got exactly the same problem, have tried all kind of combinations. Only different appearing window is fastboot but that is totally useless as the device doesnt appear on Hisuite either. What happens when the batter totally drains ?
---------- Post added at 04:29 PM ---------- Previous post was at 04:26 PM ----------
- Turn off your phone and connect it to your computer using USB cable. Press and hold the Volume Up and Power Button for 15 seconds, until the device restarts and enters the eRecovery mode. Select "Emergency backup" . Works on EMUI 9.1 only!
IMO theres no other way to save your data...[/QUOTE]
Phone does not turn off, and whatever button you press it just keeps showing Huawei start screen except for volume down and power button combination which opens fast boot window. Do you how to connect the device to laptop while in fastboot mode? We have tried fastboot commands on terminal but didnt get anywhere with file recovery...
so no solution?
U can do it, but u need dissasembly the phone, to make test point, if phone isn't hw damaged yes u can fix it in that way
hi may I ask if you have resolved the problem? Been experiencing the same problem when my huawei p20 lite got stuck on a startup logo screen
same problem with me, phone is stuck on start up logo, not moving anywhere despite using all the tricks, any solutions, anyone have?
Hi, I have same problem. Stuck on HUAWEI logo and power off do restart.
Phone is with last stock FW, FRP and BOOTL. locked. I tried update from SD card, but no succes. All buttons combinations not working except fastboot. But in fastboot, there is no possibility to do something due to locked btldr.
But I have one advantage, I have same phone model with same firmware working. Is there any possibility to recover bad piece?
*bump*
anyone who fixed this ?

Bricked phone?

Hello, I registered here in XDA to only ask a question.
I have a phone (Hyundai e501) that's bugged in the no command screen.
My aunt gave me the phone with the description of 'just fix it'. My guess is that the ROM is corrupted so I tried to flash a new one (if that's how it's called).
I saw a YouTube tutorial and got pretty far until it said that the phone has no space.
So my question is: how can I factory reset / format the phone without starting it? I tried to use the recovery menu but it automatically says 'No command', even when I'm not trying to get to the recovery menu.
I tried the combination of buttons that said to get to the 'No command' screen with the power and vol up button pressed and then click and unclick vol up button and it didn't work.
Is there a program that could help me? If there's not it could be a hardware issue? Thanks!

Categories

Resources