I have a Samsung s7 stuck on the front page with frp lock, I made a mistake while installing a custom rom. I am trying to install a stock rom: but all I get is odin cant get through serial port or Complete write operation failed. The most common response is it cant get through the serial(com) port. FAILED.(Many Many Many times) I have tried different usb port, reinstalled usb drives, don't have kies do it cant clash with that The last one I did came up with this.
SM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4195 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin engine v(ID:3.1301)..
Can you help. I am beginning to think I will have to buy a new phone. I have all version on odin from 6 to 13. Several verions of stock firmware for samssung s7 sm-g930f and many twrp.
WHat am I doing wrong?????????????????????????????
Hi , you can try one of this steps : )
1. Reset COM ports:
http://blog.cognitioninfotech.com/2009/01/how-to-clear-or-reset-com-port.html
2. Uninstall all drivers for your device like Android , MTP driver , adb driver , etc....
Use USBDeview toll to uninstall hidden drivers .
32 bit:
https://www.nirsoft.net/utils/usbdeview.zip
64 bit:
https://www.nirsoft.net/utils/usbdeview-x64.zip
3. Download latest version of ODIN
https://odindownload.com/download/Odin3_v3.13.1.zip
4. Make sure that Windows Update is Avtivated and also make sure that PC drivers for usb is updated or just reinstall them.
5. Disable Antivirus protection , and Reset Windows Firmware to Default settings .
6. Use Original cable , and usb 2.0 ports from back .
7. If you was using Android 7 with security patch from April 2018 , flash this combination firmware once your COM port is show up.
https://drive.google.com/uc?export=download&id=1M9T2tii3JcYZQ1YbP54dPiQI8hNrytOx
An example of how it should look:
https://www.youtube.com/watch?v=aCDgGF7VvY8
7. If that doesn't help you make sure you are using Latest stock firmware , otherwise flashing with always fail !
To make sure you are using right firmware send me 7 and 8 number from IMEI number : ) .
Good luck
Related
I have a S3 that received OTA and I updated. I am talking about a stock S3, no root, no changes. The phone died and I could not enter recovery mode. I can only enter the Odin Mode. I tried first with Keis in some computer and cables but Keis cannot recognize the phone.
I then tried ODIN 3.07 with a stock image but that didnt work. (see below, it says there is no pit partition). I also tried to repartition but it fails.
I tried ODIN in several computer and several cables as well, including a Windows XP.
This appear on the phone:
Code:
"Odin Mode
Product name: GT-I9300
Custom binary Download: no
Current Binary: Samsung Official
System Status: Custom".
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGND5_I9300EPLGNE1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
This I tried later (re partition):
Code:
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas on how to fix this?
jsmith432 said:
I have a S3 that received OTA and I updated. I am talking about a stock S3, no root, no changes. The phone died and I could not enter recovery mode. I can only enter the Odin Mode. I tried first with Keis in some computer and cables but Keis cannot recognize the phone.
I then tried ODIN 3.07 with a stock image but that didnt work. (see below, it says there is no pit partition). I also tried to repartition but it fails.
I tried ODIN in several computer and several cables as well, including a Windows XP.
This appear on the phone:
Code:
"Odin Mode
Product name: GT-I9300
Custom binary Download: no
Current Binary: Samsung Official
System Status: Custom".
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGND5_I9300EPLGNE1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
This I tried later (re partition):
Code:
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas on how to fix this?
Click to expand...
Click to collapse
Pit partition is corrupt try rescue firmware if that fails service center >> http://forum.xda-developers.com/showpost.php?p=30087735 <<
tallman43 said:
Pit partition is corrupt try rescue firmware if that fails service center >> http://forum.xda-developers.com/showpost.php?p=30087735 <<
Click to expand...
Click to collapse
Thanks for the tip, however, I guess it stuck on the pit partition again (1 hour already):
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
I have a SM-G900A Galaxy S5 and in the process of trying to download a custom recovery I got a message on my phone telling me that I needed to take my device to the nearest AT&T store (do not remember exact message) and it was stuck on that screen so I put the phone in download mode and tried to install a stock 4.4.2 firmware (even though my phone was on 5.0) that was still on my computer and when I tried it gave me this on odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G900AATT1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And gave me this message on my phone:
ODIN MODE
PRODUCT NAME: SM-G900A
CURRENT BINARY:CUSTOM
SYSEM STATUS:CUSTOM
REACTIVATION LOCK(KK): ON
KNOX WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, R1, A4, P1
SECURE DOWNLOAD: ENABLE
UDC START
then it says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
anyone got any ideas?
The ATT variants have the bootloader locked and do not support downgrading. If you grab the newer firmware, you'll be fine.
es0tericcha0s said:
The ATT variants have the bootloader locked and do not support downgrading. If you grab the newer firmware, you'll be fine.
Click to expand...
Click to collapse
I got the newer firmware and it still gave me a similar message
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> One Click Downloader Mode
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003>
<ID:0/003>
<OSM> All threads completed. (succeed 0 / failed 1)
And on my phone the last line now says SW REV CHECK FAIL : [aboot]FUsed 4 > Bianary 3
Has to be the same version or newer. If it's failing on the aboot, that means you're attempting to downgrade.
es0tericcha0s said:
Has to be the same version or newer. If it's failing on the aboot, that means you're attempting to downgrade.
Click to expand...
Click to collapse
I got this firmware from here http://forum.xda-developers.com/att-galaxy-s5/general/att-s5-lollipop-stock-rom-g900aucu3boc4-t3137519 it lollipop, the version I was on before
PLAYND1RTY said:
I got this firmware from here http://forum.xda-developers.com/att-galaxy-s5/general/att-s5-lollipop-stock-rom-g900aucu3boc4-t3137519 it lollipop, the version I was on before
Click to expand...
Click to collapse
Disable Reactivation Lock, and then install the firmware.
Uzair40 said:
Disable Reactivation Lock, and then install the firmware.
Click to expand...
Click to collapse
I'm sorry, I don't know how to do that? I cannot access the phone at all, I can only go into download mode
Good Afternoon,
After reading all of the threads pertaining to this, I am not step closer in solving my problem with my phone. A little background on the issue. 4 weeks ago my son, had his phone stolen. However, it has been recovered and returned to me.
1. Once returned I tried to factory reset the S6 which failed. The phone was asking for a Samsung account in which the phone was initial for. Which was me, but every time I entered the correct information the warning was process failed. Got it!! Time to flash
2. After coming to this site from the advice of a co-working I downloaded the Samsung USB drivers, Odin v3.10.6 and ROM (G925AUCU3BOI2) (this is not the first ROM in downloaded)(I have been at this for a couple of days) which is the most current for v5.1.1.
3. After following the steps, it has passed within Odin. (See Log below)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G925AUCU3BOI2_CL5527015_QB6363207_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G925AUCU3BOI2_CL5527015_QB6363207_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G925AUCU3BOI2_CL5527015_QB6363207_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G925AATT3BOI2_CL5527015_QB6363207_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
4. Once everything went through and the Edge rebooted, it has looked like that nothing has changed and the phone is still asking me for my samsung information stating that there was an abnormal factory reset. Same as it stated before. and with me adding the correct samsung information still saying that the process has failed.
Nothing has changed with installing the new firmware on the phone. Am I doing something wrong? Is there a step that is missing in flashing this phone?
Prior issues leading to me installing this ROM was:
Receiving error: SW REV CHECK FAIL DEVICE:3 BINARY: 2
Load failing after a NAND whatever its called..lol
Please any information will be helpful! Thank You
hi ... i'm using galaxy s3 gt i9300 and have been using cm11 for 6 months normally..
yesterday suddenly my phone was stuck at samsung screen ... i tried twrp to reinstall cm11 but when i tries to factory reset it fails and shows a bunch of errors like :
unable to mount system
unable to mount data
unable to mount storage .. etc
then i tried to install from micro sdcard but it shows 0mb same as internal storage..
i tried to flash cm11 via adb from pc but it also fails
can you help me ?
thanks
i tried but it also failed it says in log box : re-partition operation failed
this is what i get when i try to flash another recovery (philz) :
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> PK
<ID:0/003>
and gets stuck at NAND Write Start!! forever
any1 can help ???
@black leg try to flash stock rom using odin !!!
princevirus said:
@black leg try to flash stock rom using odin !!!
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMK6_REV02_REV04_CL1413323.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9300OXAGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9300XXUGMK6_2168382_REV00_user_low_ship_.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried to only flash the rom and tried to flash with pit file but it always fails or gets stuck at nand start all
My phone has been softbricked(stuck on samsung logo) and the recovery mode has been blocked by frp lock.
My questions are: is the stock rom the model no(SM-J700M) and Country(TTT) firmware and if so when I flash on Odin, I get
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Have you tried just flashing the stock firmware with Odin?? That usually fixes that problem. If not try bypassing FRP.