Dear XDA,
Recently, a phone Lenovo A858t has been flashed with "A858t_USR_S302_1501111200_MP13V11_BMAIN_RU" firmware using SP Flash Tool (preloader checkbox was checked and Format ALL and Download was chosen in selectbox). After that there was no signal for both SIM cards. So, we've tried to set IMEIs with Mobileuncle app as here's written. Also, the commands were: AT+ EGMR = 1,7,"IMEI_1" and AT+ EGMR = 1,10,"IMEI_1 + 8". So, now when viewing Phone 1 and Phone 2 options in Radio Information section which is in Mobileuncle app. It shows two different IMEIs and this's OK, but when calling *#06# it shows two lines with same first IMEI (might be chinese firmware bug ...), but SIM and dialling work well.
The Internet doesn't work as should to. For example, when trying to add an account for Google ( it asks "New" or "Existing" account, tried both ) it can't connect to an Internet ( also the Internet arrows (4G) in status bar don't change ). When trying to surf with browser it shows that there's no Internet, but Google search works! I mean, it shows result of search query and 4G arrows in status bar shows activity. Also, included "firewall" shows that Google search ate ~100kb of Internet. So, as the result the Internet doesn't work and second SIM, too ( second SIM is from another country so this could be another reason ).
What could this be? How to enable the Internet in this firmware?
Thank you very much!
Best regards
Related
hi friends
I have sx56 att upgraded wm2003.
I have taken services for gpras and tried to setup in my sx56.
following are the details of gprs settings that my mobile career provided me.
+++++++++++++++++
1. start -> setting -> connection -> tap-connection.
2. under internet setting .... choose "my work network " -> add new modem.
3. tap "general" and connection setting name as "XXXXXXXX"
4. enter connection name as "XXXXXXXX"
5. select "cellular line gprs".
6. by tapping next --- given APN "XXXXXXXXX".
7. user name and password keep blank and tap finish.
8. again go to connection -> manage existing connection -> select proxy setting
9. tap on both the block and go to 'advance' ... in first window write URL and and in WAP setting enter "xx.xx.x.xxx" - 9201. -> tap ok.
10. from the desktop -- tap coverage tower and connect using "XXXXXX" connection.
+++++++++++++++++
ok all the above setpes are done by me and I am able to establsih connection.
I have also checked by command prompt and checked ipconfig details.
I found all assigned ip and dns in it.
the problem is I am not able to open any site in IE browser and page processing shows loading.
can anybody tell me what can be the problem.
thanks
GPRS
Hi All
I have similar problem
I just unlocked my ATT phone using the Wizard
WorKs flawlessly except the Calendar and dTree both end up in German
Is there any fix
The other problem is GPRS
Gprs connects to provider the problem is I am not able to open any site in IE browser and page processing shows "The page you are looking for cannot be found"
can anybody tell me what can be the problem.
Great Forum
Thanks
Maynard
gprs
I just unlock my phone using the xda-developers serv 1.2exe and after that use a upgrade rom and radio from siemens to wm2003
my radio is a.33.02 and the rom version is a.20.09 ENG
and is working beautifull
i have the upgrade if anyone want it but can upload here i tried
send me a pm with email address
I finally got my HTC programmed and working. Everything with it is great, except now it cannot connect to the internet.
I get two kinds of error messages- initially it kept telling me that my username or password was wrong..... I couldnt find a place to enter either of those [not that i knew what they should be anyway], and I've never had this problem on my other HTC's. Now its telling me that it cannot connect for an unknown reason and that i should change the settings if needed or reset the device according to manufacturer's documentation....
What should I do?
I upgraded to wm6.1 last night, and im running USCC as my carrier.
It was suggested to me that i enter ##778 mode and change some settings there, but i do not know the MSL for my area.
Any idea where to find that?
Thanks.
Not sure if these will work but found them when I was looking for my MSL.
Use this method. I don't know who found it, but credit goes to them.
Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a about 10 minutes (more time will not hurt), and soft-reset.
* Check to see that the file \Atlog\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:
~~~~~~~~~~~SNIP~~~~~~~~~~~~
00:00:00 Tx:AT+HTC_RMSL=0\r
00:00:00 Rx:+HTC_RMSL: (###THIS WILL BE THE MSL###)\r\n0\r
00:00:00 Tx:AT+HTC_ROTKSL=0\r
00:00:00 Rx:+HTC_ROTKSL: 123456\r\n0\r
~~~~~~~~~~~SNIP~~~~~~~~~~~~
The numbers next to the Rx: +HTC_RMSL line should be your MSL
OR
Do a search for BAFMSL. It's a universal SPC code finder tool.
It requires .net 3.5, and tends to fail randomly, but so far has worked on 8 of 10 phones I have tried it on.
BTC
http://www.rimweb.in/forums/index.php?showtopic=17301
=] Awesome. This is just what I needed. Thanks.
HTC MSL
I finally got my HTC programmed and working. Everything with it is great, except now it cannot connect to the internet.
I get two kinds of error messages- initially it kept telling me that my username or password was wrong..... I couldnt find a place to enter either of those [not that i knew what they should be anyway], and I've never had this problem on my other HTC's. Now its telling me that it cannot connect for an unknown reason and that i should change the settings if needed or reset the device according to manufacturer's documentation....
What should I do?
I upgraded to wm6.1 last night, and im running USCC as my carrier.
It was suggested to me that i enter ##778 mode and change some settings there, but i do not know the MSL for my area.
Any idea where to find that?
Thanks.
Last edited by MysticThunder; Today at 01:38 AM.. Reason: new title.​
Should be as simple as 000000. Same as Verizon...I just did mine, hope it works....KC
On my Titan all I did after upgrading the rom was create a new connection, called it broadband, entered #777 as the number, and my phone number followed by @vzw3g (password blank, check save password) and it worked fine.
MysticThunder said:
I finally got my HTC programmed and working. Everything with it is great, except now it cannot connect to the internet.
I get two kinds of error messages- initially it kept telling me that my username or password was wrong..... I couldnt find a place to enter either of those [not that i knew what they should be anyway], and I've never had this problem on my other HTC's. Now its telling me that it cannot connect for an unknown reason and that i should change the settings if needed or reset the device according to manufacturer's documentation....
What should I do?
I upgraded to wm6.1 last night, and im running USCC as my carrier.
It was suggested to me that i enter ##778 mode and change some settings there, but i do not know the MSL for my area.
Any idea where to find that?
Thanks.
Click to expand...
Click to collapse
there are a few settings in you need to make sure are corect in the m ip settings of the phone after u press ##778. I am using uscc and had the same issue. so I know this to be a factor after updating roms. Below are the correct settings for your m ip
Number of Profiles : 6
Active User Profile Index : 0
MIP_MODE : Mobile IP Prefered
MIP Registration Retries : 1
MIP Registration Retry Timeout : 2000 ms
MIP Pre-Registration Timeout : 3
Mobile Node-HA Authentication : Enable
Send a Registration Request Only in Use : Enable
Dormant Hanfoff Optimization: Enable
I cant stress enough... these need to be exact with uscc... dont forget to run the uscc carier cab.
If you want to have EVDO when it comes to your areas as well, under Security Settings, make sure the HDR username is your [email protected], and the ESN is in hex and all capital letters. The HDR Password is your ESN the same as above but no @uscc.net on the end.
Below this screen is also the ppp username and password, they should be your phone#@uscc.net and your phone # as the password.
These 2 settings are also necessary for data to work correctly.
BTC
So, when I get to the license menu, it asks for name and serial number. How do I enter my name and what serial number do I use?
Thanks for such a newbie question.
`swamp
bump
swampy11 said:
So, when I get to the license menu, it asks for name and serial number. How do I enter my name and what serial number do I use?
Thanks for such a newbie question.
`swamp
Click to expand...
Click to collapse
After using the program for over a month, I was just randomly asked this by my device. Entering the serial number (behind the battery) did not do a thing. I tried deleting the bandswitch program from the program list (settings, delete programs). nothing. (I am not getting ANY connections)
I tried a system restore using SPB backup saved about 3 weeks ago. Tried backing up from an even further restore point with SPB backup.
nothing.
Connection manager cannot find ANY connections. unable to manually configure network. using At&t simcard never had a problem til now. everything was great. WHAT HAPPENED!?
I can't use my phone at all. I'm gonna have to wait until I get home and reflash/reinstall ROM to start fresh. But I really shouldnt have to (!). checked with at&t/cingular (california, usa) no problems with towers or anything on their end.
wtf.
swampy11 said:
So, when I get to the license menu, it asks for name and serial number. How do I enter my name and what serial number do I use?
Thanks for such a newbie question.
`swamp
Click to expand...
Click to collapse
You need to buy the license to get it, from the website..
Then need to enter the Owner Info (name). This menu is hidden by default. U need tweak to enable Owner Info. U can use BsB Tweak from here.
The owner name i located in Setting Tab >> Menu >> All Setting >> Personal >> Owner Info.
Actually, there's several alternative to Bandswitch which is free. U can use WMLongLife (search it) which have more option. Or u can add 3G Enable Comm Manager (to enable/disable 3G) and in combination with Advanced Configuration Tool (to get disconnect idle connection setting).
Bandswitch is not freeware. Install Touch Tools instead. It has an option for auto-disconnecting data, among other options.
Anybody know how to add the 4g only setting
https://forum.xda-developers.com/me...te-4g-mode-t3828656/post77318151#post77318151
try this...
Unfortunately, it doesn't work for me. 4g only is not unlocked. Has anyone else's ideas
MasterLu2k said:
Unfortunately, it doesn't work for me. 4g only is not unlocked. Has anyone else's ideas
Click to expand...
Click to collapse
Hello,
yes, now we finally found a solution.
Do exactly as described:
Download Settings Database Editor from playstore and open it
Look for hw_networkmode_preference and edit the stock value "9,6,2,1" to "11"
Restart the device
Open Settings Database Editor
Click on + Add new setting at the top
Type "hw_add_4g_only" (without " ") and press save changes
Type in your country code, example "502" Malaysia or "262" Germany. Press save changes
Type "hw_add_4g_only" (without " ") and press save changes (YES, REPEAT STEP 6)
Type in your country code, example "502" Malaysia or "262" for Germany and press save changes (YES, REPEAT STEP 7)
Restart the device and VOILA!
Now you have access to ALL network modes. Select "LTE" or "4G" for 4G only functionality.
Like this, you have stable Internet nearly where ever you go, without dropping back to overcrowded 2G/3G Networks.
Best,
Stefan
p.s.: thanks to ronald_loulan for original solution!
will this work when travelling to other countries?
It's work
Thank you very much
Edit: got it working 4g only now.
One question though, the UK country code is 234 and 235.
Do I add both numbers and just separate them with a comma?
Thanks.
Mate 20 pro 4g only
Xergi said:
Hello,
yes, now we finally found a solution.
Do exactly as described:
Download Settings Database Editor from playstore and open it
Look for hw_networkmode_preference and edit the stock value "9,6,2,1" to "11"
Restart the device
Open Settings Database Editor
Click on + Add new setting at the top
Type "hw_add_4g_only" (without " ") and press save changes
Type in your country code, example "502" Malaysia or "262" Germany. Press save changes
Type "hw_add_4g_only" (without " ") and press save changes (YES, REPEAT STEP 6)
Type in your country code, example "502" Malaysia or "262" for Germany and press save changes (YES, REPEAT STEP 7)
Restart the device and VOILA!
Now you have access to ALL network modes. Select "LTE" or "4G" for 4G only functionality.
Like this, you have stable Internet nearly where ever you go, without dropping back to overcrowded 2G/3G Networks.
Best,
Stefan
p.s.: thanks to ronald_loulan for original solution!
Click to expand...
Click to collapse
Here is what work for me.
If you already had a hauwei phone and used "setedit" and you now upgraded to you Mate 20 pro with using the "phone clone" app.
You will notice the "setedit" app won't be copied over. So head on over to "play store" and download it.
Follow the steps give in this thread to enter all the setting on the "setedit" app.
Restart your device. You will see it didn't work. No problem. Just uninstall the "setedit" app and restart your device.
Now go to your mobile network setting and you will see you will have all the setting for networks including 4g only.
you can try this at teknokia site
This guide is a copy paste from this thread:
[GUIDE] Switch software region to Upgrade to ColorOS 11 and enable Dual Sim.
I want to write this here so it's all in one place and not scattered around different threads. Apologies for the bad formatting in some parts as this is on of my first contribution. Most of this is copied from this thread: I am adding onto this...
forum.xda-developers.com
For my oppo find x 2 neo it worked.
I remind you that it precedes it and has your danger
I am not responsible for any damage or blockages
DISCLAIMER: Use this at your own discretion. So far, when it works, it doesn't wipe any personal data
and nearly no issues are caused. Still, I am not responsible for bricked devices, broken warranties or lost data.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. If it says "device not found" or something similar, make sure MTP Mode is activated. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose this one: "Singapore Ex". Note: This Version has Theme Store, but no Ringtone Maker. Feel free to try other versions. EDIT: DO NOT CHANGE TO A REGION WITH CARRIER, ESPECIALLY THAILAND AS YOU WON'T BE ABLE TO CHANGE BACK! AT LEAST WHILE ON ANDROID 10. STICK WITH THOSE THAT END IN EX. Once you have done this, it appears that you can always bring up the region menu when dialing the numbers..
Your phone should now reboot. Once it's rebooted, your region will have changed.
Every time you changed region and want to change it again you need to use the software. You can get a code that you can use every time to change the region instead of using this software every time. (Update- one person report that this code(token) wont work for every time as his STAMP code changed.)
For this you need to: Open the dialer app , dial *#9434# ,press authtokendecrypt. You will see a IMEI and STAMP. Open the Sec5.exe and write the IMEI and STAMP shown on your phone in the blank space of the IMEI and STAMP in the software and press Generate a token, you will see a string of numbers and letters, write it on the token blank text box and click authtokendecrypt. Now you will see every text written in green. Now you can follow the steps in the guide but skip the steps that have to do with sec5. The Token that the software gave you is the same code that you need to enter in the *#9434# every time you want to change region so you do not need to use the software ever again.
UPDATE: Currently, it doesn't seem to work anymore for some people. Try installing Loopback network driver ( How to install Loopback) and uninstalling or disabling all other network drivers. If you are afraid of doing this with your own device you can use a Virtual Machine, too. I tried it this way.. Rest of the process is the same, just change the network address in Device Manager the same way as before.
Now that you are on the Pakistan Version, you can also run the device in dual sim mode, which was disabled in EU Mode. Some users have ordered Dual-Sim-trays on AliExpress and are now able to use it in this way. Also this might open up the path to unlock the bootloader, since that is limited to chinese devices only. I have not tried this out yet, though.
In theory, changing your region like this should work on any OPPO device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants.
this guide no longer works with the new updates for both x2 pro and neo so let's avoid posting things that are not valid there is already a tutorial
*#3954391# and *#391#not working in color os 11 solution plz