Hi there!, sorry for my english.
:laugh: Well, I did a full factory reset to my Kindle Fire HDX 7, after that, the "Special offers" don't appear again. Root no needed.
Versión: 13.3.1.0
Steps:
1. Go to Settings Menu
2. Tap on Device
3. Tap on Reset to Factory Defaults
4. Select Reset
Wait for reboot, then "Special Offers" will not appear in lock screen
Hola, bueno ahora en español es más fácil la explicación, simplemente hice la restauración a estado de fabrica y los anuncios desaparecieron, al parecer son instalados como aplicación después de configurar el sistema. :good:
Doit_nt said:
Hi there!, sorry for my english.
:laugh: Well, I did a full factory reset to my Kindle Fire HDX 7, after of that, the "Special offers" don't appear again. Root no needed. May "Special offers" was installed after install mojito.
Hola, bueno ahora en español es más fácil la explicación, simplemente hice la restauración a estado de fabrica y los anuncios desaparecieron, al parecer son instalados como aplicación después de configurar el sistema. :good:
Click to expand...
Click to collapse
What version were you running at the time?
Another Way To Disable Special Offers?
You are going to have to be a little bit more clear than that. What are you saying?
Doit_nt said:
Hi there!, sorry for my english.
:laugh: Well, I did a full factory reset to my Kindle Fire HDX 7, after of that, the "Special offers" don't appear again. Root no needed. May "Special offers" was installed after install mojito.
Hola, bueno ahora en español es más fácil la explicación, simplemente hice la restauración a estado de fabrica y los anuncios desaparecieron, al parecer son instalados como aplicación después de configurar el sistema. :good:
Click to expand...
Click to collapse
Doit_nt said:
Hi there!, sorry for my english.
:laugh: Well, I did a full factory reset to my Kindle Fire HDX 7, after of that, the "Special offers" don't appear again. Root no needed. May "Special offers" was installed after install mojito.
Hola, bueno ahora en español es más fácil la explicación, simplemente hice la restauración a estado de fabrica y los anuncios desaparecieron, al parecer son instalados como aplicación después de configurar el sistema. :good:
Click to expand...
Click to collapse
I just did something similar with my 8.9.... basically, i removed special offers and did the wallpaper fix when i rooted the hdx and when i restored to the original firmware (modifed the file to make it think it was a new firmware being installed), the offers and ads all disappeared entirely. I don't know if they'll return until the firmware update is pushed to the tablet, but so far, ads just disappeared and won't be coming back it seems.
Bit of an update: While the ads are completely gone, the message on the lock screen says i need to verify my kindle fire with amazon. The thing is, i did verify it with them. So while i have no "special offers" advertised on the kindle, the menu is still there and the lockscreen still shows it, but the images don't exist. Very odd. I'm sure if i do a factory reset it'll show up again.
---------- Post added at 06:35 PM ---------- Previous post was at 06:17 PM ----------
godsburden said:
Bit of an update: While the ads are completely gone, the message on the lock screen says i need to verify my kindle fire with amazon. The thing is, i did verify it with them. So while i have no "special offers" advertised on the kindle, the menu is still there and the lockscreen still shows it, but the images don't exist. Very odd. I'm sure if i do a factory reset it'll show up again.
Click to expand...
Click to collapse
As predicted, they showed up again. So if ads are something that absolutely drive you crazy, you can easily get rid of them using the root/update method.
Faznx92 said:
What version were you running at the time?
Click to expand...
Click to collapse
Versión: 13.3.1.0
tech6 said:
You are going to have to be a little bit more clear than that. What are you saying?
Click to expand...
Click to collapse
Sorry, well, I did this:
Steps:
1. Go to Settings Menu
2. Tap on Device
3. Tap on Reset to Factory Defaults
4. Select Reset
Wait for reboot, then "Special Offers" will not appear in lock screen. :laugh: Sorry again...
Thanks for elaborating. However, do you not reset your device and loose root when you do that?
Doit_nt said:
Sorry, well, I did this:
Steps:
1. Go to Settings Menu
2. Tap on Device
3. Tap on Reset to Factory Defaults
4. Select Reset
Wait for reboot, then "Special Offers" will not appear in lock screen. :laugh: Sorry again...
Click to expand...
Click to collapse
Can't u just root and flash with stock ROM but with the no ad version?
Sent from my Amazon Kindle Fire using Tapatalk
I did this and the ads do disappear if you are powering down the Kindle. However, they now re-appear when the Kindle goes into hibernation. Once you wake it up, those lovely ads are back! Any suggestions?
I tried Stunts wallpaper fix after I rooted and used the scripts to get Gapps on the Kindle. When using the wallpaper fix, I lost root. It may be because of adding BusyBox, but I'm not sure. When BusyBox is added and I do the wallpaper fix I lose root. So, I have nothing but a black screen now, no wallpaper.
Home Screen Setting to Hide 'Ads'
tech6 said:
... those lovely ads are back! Any suggestions?
...
Click to expand...
Click to collapse
I'm not sure what ads or "Special Offers" you all are referring to, since I've never seen any such push-ads as described here in this thread, on my stock HDX7--not rooted, no factory "reset", nor "wallpaper fix". I'm also not sure if you all are aware of the following setting:
<Settings> <Applications> <Home Screen> [Show/Hide Recommendations] <Hide>
FYI, give this a try...
TL3, thanks for your reply. You got me, I forgot to change that setting. I did, but it just meant less ads to go thru. Before the tech guys (I love 'em all!) came up with the latest script, I didn't have any ads. There are no ads once the Kindle restarts after being turned off, but when it goes to black or into hibernation the ads reappear. Once waking it up, the ads are on the lockscreen. Using the Gapps script, I have not been able to get rid of them when waking up the Kindle.
However, there was a fix that here http://forum.xda-developers.com/showthread.php?t=2569309 that required removing permissions from the adunits folder. When you do that, they disappear, but you may be left with one wallpaper, the lockscreen wallpapers stop rotating at that point. So, you're left with the dull looking pencil one I believe it was. Others also reported the same.
I just deal with it. It's no biggie, just interesting why it's occuring along with the Kindle upgrading message when you re-start the device. Thanks for the reminder about the ad recommendations. I forgot to change it. Cpasjuste's Gapps script did so much for us, I thought he had thought of that also!
Thanks for the reply. I really appreciate it.
Happy Kindling!
Manage My Kindle
tech6 said:
... I forgot to change that setting. I did, but it just meant less ads to go thru. ...
Click to expand...
Click to collapse
@tech6, not sure if this is applicable, but I just discovered another 'Special Offers' setting that might help...
Log into your 'Manage My Kindle' account online at:
amazonDOTcomSLASHmyk [...I can't post links yet...]
Click on 'Manage Your Devices' on the left under 'Your Kindle Account'
Click on 'Edit' next to 'Special Offers' to unsubscribe
FYI...
Oh yeah I went there. I was ready to hit the unsubscribe button when I saw where if you do that is an automatic $15 . Your research is very goog I must say.
It's like no two Kindles are the same. Like you and othrts don't have this problem , but I do. I'm wondering is it because I reset my device using the build number change method. Because when I first rooted it! I didnt have this problem.
Well, the ads are at least very appealing to the eye. Thanks for your suggestion.
Sent from my BNTV600 using Tapatalk
tech6 said:
Oh yeah I went there. I was ready to hit the unsubscribe button when I saw where if you do that is an automatic $15 . Your research is very goog I must say.
...
Click to expand...
Click to collapse
$15?! WTH... I just so happened upon this setting when I was searching for a way to change the device name. Anyway, my 'Special Offers' setting was already indicating as 'Unsubscribed' when I logged into my account. When I click on 'Edit' to see what other options are available, I got the following pop-up notice:
Code:
Subscribe to Special Offers & Sponsored Screensavers
To subscribe to Special Offers, you will first need to set up your 1-Click payment method with a valid U.S. billing address here*.
* Link to my Amazon.com's Payment Settings page referencing that "kinw_myk_dtcp_need_one_click".
I never had, nor will I ever if I can help it, setup that 1-Click payment on my Amazon account so I backed out and didn't get to see how 'subscribe' and 'unsubscribe' work.
FYI...
I don't have the once clicked I will check again and see if I get a message that they will charge me. Maybe that's the problem.
Oh, no when I went there and was met with this message:
Unsubscribe from Special Offers & Sponsored Screensavers
This Kindle is currently subscribed to Special Offers and was purchased at a subsidized price ($15 discount).
Amazon is able to offer the Kindle at a subsidized price by delivering Special Offers & Sponsored Screensavers.
By unsubscribing you will be charged $15 (plus applicable tax)
Also, my Kindle reboots when in stock rom if I turn off wireless. However, it only takes one time to turn it back on. When in rom 1 it took me several tries before it would come back on.
HTH
This doesn't seem right to me... seems more like 'extortion' in order to remove SPAM from a tablet that one had purchased?! This makes me very leery when Amazon asks to click on anything Kindle-related in the future, and I'll be sure to scrutinize those fine prints way more thoroughly...
If you weren't rooted, I would suggest contacting their 'Mayday' support and have them explain fully this unsubscribe fee. However, you're already rooted, so they wouldn't be of much service now. You might try removing any 1-Click payment scheme that you currently have associated with your Amazon account, and see if that automatically disable your 'Special Offers' subscription since they won't have any means of getting at your money. This really sucks...
Hello everyone,
I have a new Amazfit GTR watch. I do not know why it put herself in boot loop since Saturday.
Because of the low battery it turns off after 2 seconds now. I did not try to recharge it to fully discharge the battery.
Someone has an idea how to fix this issue?
Ups, sorry to hear that... Let's see if we can find a solution for this but I think it's going to have a firmware issue so it's proper to restart to factory defaults.
julsor said:
Hello everyone,
I have a new Amazfit GTR watch. I do not know why it put herself in boot loop since Saturday.
Because of the low battery it turns off after 2 seconds now. I did not try to recharge it to fully discharge the battery.
Someone has an idea how to fix this issue?
Click to expand...
Click to collapse
You can restart,the gtr to pusch the 2 buttons on the same time,this wil restart the watch in QR mode.
Because i had a problem,hart rate puls,wash on hold.
Need help with this... Cannot use my GTR... Is on boot loop. Do you managed to Overcome this?
Please help. I have the same problem
I could help myself now. The GTR simply has to be connected to the charger. Then it "repairs" itself and you have access again.
Had a similar issue while I accidently upload a bigger then supported watchface file. I managed to fix this issue by connecting the watch to the charger, while the charging animation is displayed i've uploaded a standard watch face from the ones in the amazfit app. You have to verify that the uncompressed watch face bin file is 1.5MB or less, they can be up to 3MB but with some issues, larger files than 3MB will create bigger issues like the one you had. Do not upload uncompressed bin files to your watch, you should always repack your bin before upload.
ajuda
someone managed to solve? I have the same problem. I've tried to press the buttons for 30s but nothing
someone managed to solve? I have the same problem. I've tried to press the buttons for 30s but nothing
i solved by #7
Hello Dear,
My amazfit Gtr2 watch is stuck on logo, i tried hard reset and soft reset but nothing works it continuously showing the same logo, I am unable to connect the watch with mobile application to change the face.
Application is unable to connect with the watch.
Please help me.
farazhasan said:
Olá querido,
Meu relógio amazfit Gtr2 está preso no logotipo, tentei o hard reset e o soft reset, mas nada funciona continuamente mostrando o mesmo logotipo, não consigo conectar o relógio com o aplicativo móvel para mudar o mostrador.
O aplicativo não consegue se conectar ao relógio.
Por favor me ajude.
Click to expand...
Click to collapse
Boa noite. Mesmo problema. Meu GTR 2 atualizou o firmware e está preso em um bootloop. Qualquer solução?
Boa noite. Mesmo problema. Meu GTR 2 atualizou o firmware e está preso em um bootloop. Qualquer solução?
How to fix the issue , i have tried all the solutions, tried uninstalling the application, installed from other place, unpair try to connect again with Bluetooth, battery all drained try to charge again, and open but issue persist .. stuck on logo screen unable to start the watch. all money goes in vain..
Eu também tenho o mesmo problema. Já está baixado, tentei carregar, mas não mostra o logotipo do carregamento, apenas volta a inicializar na hora. pressionar o botão vermelho apenas interrompe o loop, mas assim que você solta o botão, ele retorna novamente.
julsor said:
Hello everyone,
I have a new Amazfit GTR watch. I do not know why it put herself in boot loop since Saturday.
Because of the low battery it turns off after 2 seconds now. I did not try to recharge it to fully discharge the battery.
Someone has an idea how to fix this issue?
Click to expand...
Click to collapse
Hello Bro ... i am facing the same issue did you find any fix or all money get wasted?
farazhasan said:
Hello Dear,
My amazfit Gtr2 watch is stuck on logo, i tried hard reset and soft reset but nothing works it continuously showing the same logo, I am unable to connect the watch with mobile application to change the face.
Application is unable to connect with the watch.
Please help me.
Click to expand...
Click to collapse
hey dude...
I'm facing the same issue...
did you solve the issue???
contact with whats app no:8385 14096
farazhasan said:
Hello Bro ... i am facing the same issue did you find any fix or all money get wasted?
Click to expand...
Click to collapse
Hey broo...
I'm facing the same issue...
did u solve the issue...
if yes help me...
I'm facing the same issue,
my watch get stuck on the bootloop,
please contact anyone who facing the same issue.
What worked for me was let it discharge completely and put in freezer for about 15-20 mins and put to charge. This worked for my GTR2.
First of all, sorry for my bad english.
Good night, the new phone was submerged in the sea, the touch screen stopped working, after several months I turned it on again and it started working, I took out everything I had and did a factory reset, I don't think so I would have erased everything and I wouldn't have done the reset anyway it was still working. I have started to reinstall everything and the touch has failed again. I try to do a factory reset and when I hit wipe, it asks me to put a number that I can't put because the screen doesn't work.
Please any solution?
Thanks.
txusma34 said:
First of all, sorry for my bad english.
Good night, the new phone was submerged in the sea, the touch screen stopped working, after several months I turned it on again and it started working, I took out everything I had and did a factory reset, I don't think so I would have erased everything and I wouldn't have done the reset anyway it was still working. I have started to reinstall everything and the touch has failed again. I try to do a factory reset and when I hit wipe, it asks me to put a number that I can't put because the screen doesn't work.
Please any solution?
Thanks.
Click to expand...
Click to collapse
You should enable USB debugging and ADB, so you can interact with an app like Vysor from your PC.
SubwayChamp said:
Debe habilitar la depuración USB y ADB, para que pueda interactuar con una aplicación como Vysor desde su PC.
Click to expand...
Click to collapse
The touch screen doesn´t work then I can`t enable usb debugging, I can`t start session because at the begiing I have to introduce the password, and I try to do a factory reset but also I can, because I have to put a number and touch screen doesn´t work.
Thanks