Related
[SIZE="<font><font class="goog-text-highlight">6</font></font>"][SIZE="<font><font>4</font></font>"]Hello guys while I rode the rom I have a strange success over the screen does not work! the touch screen no longer works! recommendations? I think I should send him to care ... because I tried to him the original ROM and various types 2.3.6 or 4.0.3 but it never works :-( screen (a piece of advice would be greatly appreciated .. A success SOMEONE YOU?? THANKS![/SIZE][/SIZE]
ITALIAN VERSION..
Ciao ragazzi mentre montavo la rom mi è sucesso una cosa strana non funziona piu lo schermo! il touch screen non funziona piu! consigli?io penso debba mandarlo in assistenza...perchè ho provato a rimettergli la rom originale e di diversi tipi 2.3.6 o 4.0.3 ma non funziona mai lo schermo :-(( un consiglio sarebbe molto apprezzato..è SUCCESSO A QUALCUNO DI VOI??? GRAZIE!!!
try install the stock ROM or restore from your nandroid backup
install another kernel
What ROM are you on? Kernel?
I9100XXKPA_I9100OXAKPA_OXA
could be an installation problem rom? I have installed 3 after the original problem but the screen does not work! wipe something that can not destroy?
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery or install CWM and root if needed
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Still problems use usb jig to set rom counter to zero .
Return to service centre .
already done everything except usb jig but the touch screen not working
The following thing happens, install this rom and it me goes of marvel, but it gives a bug, on having tried cambair the topic, gives me mistake, says the temas.apk has been closed unexpectedly ... since souciono this :crying:
This is unreadable. Can you repost?
Hi,
I just got the Lenovo Z5. Brilliant little phone but having a few teething issues and not sure if its due to the ZUI OS or i'm missing something in the settings so was wondering if anyone could help with the below issues:
1. There is a notification LED when charging which can be turned on, which i have done but i have no idea how to make any other apps use it eg Gmail, Facebook, Watsapp etc? Coming from a phone that had this as standard makes it annoying if your phone is on your desk and you just want to glance over to see if something requires attention.
2. When a notification comes through the screen doesn't light up so i then have to press the power button to see it. Is there a way to force it to light up on a notification?
3. Sometimes app's won't connect to the internet unless i have the phone unlocked and that is after changing the battery settings. For example Watsapp Web will only connect on my PC if the phone screen is unlocked and active. So its as if the app's aren't passing data back unless the screen/phone is in use.
4. Some apps don't seem to create notifications even though i've changed the OS settings to allow notifications and i know those app's create notifications because they used to on my old phone.
Any help with the above would be much appreciated.
If there is no way of resolving the above is there a way to put a stock android OS on?
Thanks in advance
Also does anyone know how to force the OS to not overlay the screen buttons onto the apps and push the apps up?
Sometimes apps share the same space as the OS buttons which makes it very hard or impossible to use certain app buttons
Thanks
olyolyoly said:
1. There is a notification LED when charging which can be turned on, which i have done but i have no idea how to make any other apps use it eg Gmail, Facebook, Watsapp etc? Coming from a phone that had this as standard makes it annoying if your phone is on your desk and you just want to glance over to see if something requires attention.
Click to expand...
Click to collapse
This seems to be a common problem
olyolyoly said:
4. Some apps don't seem to create notifications even though i've changed the OS settings to allow notifications and i know those app's create notifications because they used to on my old phone.
Click to expand...
Click to collapse
I have the same problem. Permissions seem to revert after a reboot
Hello guys. Recently I did the rom exchange process via QFIL. The first ROM I used was the one that is here in the topics like android 9.0. My device is now frozen in the "ANDROID" screen. I tried other roms that also, at 075, 052, 200, 108. But none worked, I installed twrp, which by the way is working perfectly, and every time I clean it, a message like "Failed to mount '/ persist' ( Invalid argument) ". I do not know exactly what I did wrong, but my cell phone does not leave the infinite loop. I would like to ask for your help, I am from Brazil, and it is difficult to write in another language, so any doubt I try to explain again.
One thing I remembered was that the second time, I accidentally clicked on the "PARTITION MANAGER" option in QFIL. I do not know if that was why. But I have refactored the processes and the problem persisted. If someone has the file "persist" to send, I will test to see if it solves the problem.
Could you fix the cell phone? I'm also from Brazil, I bought this phone and it arrives until Tuesday, I'm looking for a better rom for him and so far nothing, this zui is crap.
Dedezaum said:
Could you fix the cell phone? I'm also from Brazil, I bought this phone and it arrives until Tuesday, I'm looking for a better rom for him and so far nothing, this zui is crap.
Click to expand...
Click to collapse
Meu brother. Consegui instalar umas ROM custom, logo mais mostro como fazer. Siga meu canal "muamba deep" no YouTube.
diogooskamarada said:
Hello guys. Recently I did the rom exchange process via QFIL. The first ROM I used was the one that is here in the topics like android 9.0. My device is now frozen in the "ANDROID" screen. I tried other roms that also, at 075, 052, 200, 108. But none worked, I installed twrp, which by the way is working perfectly, and every time I clean it, a message like "Failed to mount '/ persist' ( Invalid argument) ". I do not know exactly what I did wrong, but my cell phone does not leave the infinite loop. I would like to ask for your help, I am from Brazil, and it is difficult to write in another language, so any doubt I try to explain again.
One thing I remembered was that the second time, I accidentally clicked on the "PARTITION MANAGER" option in QFIL. I do not know if that was why. But I have refactored the processes and the problem persisted. If someone has the file "persist" to send, I will test to see if it solves the problem.
Click to expand...
Click to collapse
Estou na mesma situação, tenho algumas roms, mas não está dando certo. ja resolveu seu problema, me manda um email, [email protected]
Lipeportomendes said:
Estou na mesma situação, tenho algumas roms, mas não está dando certo. ja resolveu seu problema, me manda um email, [email protected]
Click to expand...
Click to collapse
Resolvi sim. Segue lá meu canal. Muamba Deep no YouTube. Tem um tutorial de troca de ROM. E se vc precisar posso te auxiliar em algo mais sobre outros erros. Comenta lá .
diogooskamarada said:
Resolvi sim. Segue lá meu canal. Muamba Deep no YouTube. Tem um tutorial de troca de ROM. E se vc precisar posso te auxiliar em algo mais sobre outros erros. Comenta lá .
Click to expand...
Click to collapse
My apparatus came with a ROM with Portuguese but well boubt, I installed into stock Rom with Chinese and English, now the phone is very good, the problem is the screen does not light up in notifications, this is very bad, Zui 4.0.
delayed notification
there is an system app called Security, open it up and add message apps to the white list
Apps in this list will not be turn off and will receive notification normally.
good luck!:fingers-crossed:
trthehien said:
there is an system app called Security, open it up and add message apps to the white list
Apps in this list will not be turn off and will receive notification normally.
good luck!:fingers-crossed:
Click to expand...
Click to collapse
I use 3.9ZUI, I dont have Security app. Do you know how to enable the LED?
Hello everyone,
I have a new Amazfit GTR watch. I do not know why it put herself in boot loop since Saturday.
Because of the low battery it turns off after 2 seconds now. I did not try to recharge it to fully discharge the battery.
Someone has an idea how to fix this issue?
Ups, sorry to hear that... Let's see if we can find a solution for this but I think it's going to have a firmware issue so it's proper to restart to factory defaults.
julsor said:
Hello everyone,
I have a new Amazfit GTR watch. I do not know why it put herself in boot loop since Saturday.
Because of the low battery it turns off after 2 seconds now. I did not try to recharge it to fully discharge the battery.
Someone has an idea how to fix this issue?
Click to expand...
Click to collapse
You can restart,the gtr to pusch the 2 buttons on the same time,this wil restart the watch in QR mode.
Because i had a problem,hart rate puls,wash on hold.
Need help with this... Cannot use my GTR... Is on boot loop. Do you managed to Overcome this?
Please help. I have the same problem
I could help myself now. The GTR simply has to be connected to the charger. Then it "repairs" itself and you have access again.
Had a similar issue while I accidently upload a bigger then supported watchface file. I managed to fix this issue by connecting the watch to the charger, while the charging animation is displayed i've uploaded a standard watch face from the ones in the amazfit app. You have to verify that the uncompressed watch face bin file is 1.5MB or less, they can be up to 3MB but with some issues, larger files than 3MB will create bigger issues like the one you had. Do not upload uncompressed bin files to your watch, you should always repack your bin before upload.
ajuda
someone managed to solve? I have the same problem. I've tried to press the buttons for 30s but nothing
someone managed to solve? I have the same problem. I've tried to press the buttons for 30s but nothing
i solved by #7
Hello Dear,
My amazfit Gtr2 watch is stuck on logo, i tried hard reset and soft reset but nothing works it continuously showing the same logo, I am unable to connect the watch with mobile application to change the face.
Application is unable to connect with the watch.
Please help me.
farazhasan said:
Olá querido,
Meu relógio amazfit Gtr2 está preso no logotipo, tentei o hard reset e o soft reset, mas nada funciona continuamente mostrando o mesmo logotipo, não consigo conectar o relógio com o aplicativo móvel para mudar o mostrador.
O aplicativo não consegue se conectar ao relógio.
Por favor me ajude.
Click to expand...
Click to collapse
Boa noite. Mesmo problema. Meu GTR 2 atualizou o firmware e está preso em um bootloop. Qualquer solução?
Boa noite. Mesmo problema. Meu GTR 2 atualizou o firmware e está preso em um bootloop. Qualquer solução?
How to fix the issue , i have tried all the solutions, tried uninstalling the application, installed from other place, unpair try to connect again with Bluetooth, battery all drained try to charge again, and open but issue persist .. stuck on logo screen unable to start the watch. all money goes in vain..
Eu também tenho o mesmo problema. Já está baixado, tentei carregar, mas não mostra o logotipo do carregamento, apenas volta a inicializar na hora. pressionar o botão vermelho apenas interrompe o loop, mas assim que você solta o botão, ele retorna novamente.
julsor said:
Hello everyone,
I have a new Amazfit GTR watch. I do not know why it put herself in boot loop since Saturday.
Because of the low battery it turns off after 2 seconds now. I did not try to recharge it to fully discharge the battery.
Someone has an idea how to fix this issue?
Click to expand...
Click to collapse
Hello Bro ... i am facing the same issue did you find any fix or all money get wasted?
farazhasan said:
Hello Dear,
My amazfit Gtr2 watch is stuck on logo, i tried hard reset and soft reset but nothing works it continuously showing the same logo, I am unable to connect the watch with mobile application to change the face.
Application is unable to connect with the watch.
Please help me.
Click to expand...
Click to collapse
hey dude...
I'm facing the same issue...
did you solve the issue???
contact with whats app no:8385 14096
farazhasan said:
Hello Bro ... i am facing the same issue did you find any fix or all money get wasted?
Click to expand...
Click to collapse
Hey broo...
I'm facing the same issue...
did u solve the issue...
if yes help me...
I'm facing the same issue,
my watch get stuck on the bootloop,
please contact anyone who facing the same issue.
What worked for me was let it discharge completely and put in freezer for about 15-20 mins and put to charge. This worked for my GTR2.
Hi guys, first of all, I have to thank each and every one of those who make up this community for helping us in a lot of things and aspects in which the problems for countless devices have already been solved, without your help and dissemination in this forum, we would all be paying to fix the device without doing it ourselves, you make us good technicians in smartphones. :RE
I will start from where it all started, at first they brought me a j7 NEO model SM-J701M with pda already updated: J701MUBU7CSG1, until there everything well, they asked me to install root, I said yes, since they tried but could not, until there everything normal, I've already rooted several smartphones of that model, so for me it would be a piece of cake (I didn't even know what I expected), at the beginning I flashed it with an original rom, the newest one (since I never let myself go back even being in USB debugging and in activated oem), so everything fine until there, the cell phone was already android 9, when I tried to install the TWRP, I sent a message in download mode, the famous error [Only Official Released Binaries Are Allowed To be Flashed], well I look for solutions and nothing works, I enter the recovery mode and the blue screen comes up with the message of: Installing updates, and giving error there is no command (I always get that message when I enter the recovery mode) now well, I can enter in recover mode and the download mode without problems, but the only inconvenience is that in recovery mode I get some messages that I will leave until the end, I want to clarify what I have already tried.
1.- Degrade the operating system (I get an error when trying even with original roms).
2.- Install a TWRP (message from: Only Official Released Binaries Are Allowed To be Flashed).
3.- Revoke the RMM, (the way they tell me to revoke the RMM, it asks me not to set the date and update it after flashing it, but when I activate the Wi-Fi, even deactivating the option of "automatic time on the network ", it changes to the current date, and even on the current date when I give it to update, I get a message that says, error when registering the device, all this in the smartphone settings menu).
4.- Unlock the bootloader, (When I enter the recovery and give it the option, Reboot to bootloader, it sends me to the download mode but without being able to do anything in download mode, forcing me to remove the battery and restart it)
That's all I've tried, now, I leave the messages that appear in the recovery mode of which, is the recovery of the smartphone and lets me use several options, such as wipe data / factory reset, wipe cache partition, apply update from SD card, and some more.
Until there everything I tried, now I leave the record that appears every time I enter the recovery (it should be clarified that the cell phone works in perfect condition and works absolutely everything, the recovery I try to install is the same as used in phones with the same model J7 NEO.)
#fail to open revoery_cause (No such file or directory) #
#Reboot Recovery Cause is [UNKNOWN] #No Support SINGLE-SKU
File-Based OTA
Supported API: 3
E: unknown Volume for path [/ odm]
E: unknown Volume for path [/ vendor]
E: unknown Volume for path [/ odm]
E: unknown Volume for path [vendor]
# MANUAL MODE V1.0.0 #
E: Failed to clear BCB message: failed to find / misc partition.
(and when I exit recovery mode with the option of power off or reboot system now)
finalizing dm-verity hash tree.
Successfully generated dm-verity hash tree.
Shutting down ...
E: Failed to clear BCB message: failed to find / misc partition.
and well in advance thank you for taking the time to read all this, the truth has been a few days with this but I find no solution to make it root that is not through TWRP, and a great apology if I do not understand very well, do it to me I know, I don't know how to speak a lot in English, just something basic, so use the google translator to create this post.
THANKS AND HAPPY HOLIDAYS AND HAPPY NEW YEAR TO ALL. :dedos cruzados: :RE
Tente passar o PIT FILE pelo odin juntamente com alguma ROM com o binário maior ou igual ao instalado previamente, caso não tenha um binário instale o mais antigo possível desse modelo.