Related
I'm getting 'unexpected stop of the process com.motorola.home.other. Retry' (actually translated from Italian 'Interruzione imprevista del processo com.motorola.home.other. Riprova') everytime I completely turn off the Razr when I turn it back on.
Did anyone of you had similar experience, can tell me what does it means and know how to fix it?
Actually the phone is not having any relevant issue using it apart from this message .
Hello I searched through the threads, bud didn't find anything that matched so here it goes.
I am working with a x10 mini pro, on which I have installed( bout a year ago) a cyanogen froyobread mod. Today I decided to update that, I downloaded flashtool and started working around it. Connected my phone and clicked on "Clean" by mistake, afterwards I think I clicked "cancel" , but I am not entirely sure.... anyways now my phone reboots all the time, when it loads up all of the apps crash ( for example "com.android.phone has stopped unexpectedly", launcher pro aswell) and a message appears - informing me that the applications system has failed.
I tried to troubleshoot this, even tried to install a new kernel and rom, but whenever I enter flashmode and attempt to continue the installation of the firmware, the phone itself disconnects from the process and continues on booting the cyanogen. What should I do. Any ideas ?
Also it seems that I am unable to enter recovery and fastboot.
EDIT: Found a way to fix it, but it restores to the original sony firmware( still better than bugged, right ?)
Here is a link: ww w.sonymobile .com/global-en/tools/update-service/ Just download and follow the steps
Yes, Thats true that app called SEUS on this forum. When you device bricked you can always restore it with seus.
Verstuurd van mijn U20i met Tapatalk
Could someone send me a stock rom for the 2015 BLU Life One 4G LTE?
(LIFE ONE X010Q)
So far I've only been pointed to the Life One thread with information about the original Life One phones and roms.
I'm one of several people I know of who are stuck in recovery mode after the OTA update that we just installed and can't find a copy of the stock rom for this phone anywhere.
Thanks!
Same problem...
I also got the same problem. I got the OTA Update and while installing the Update, I got an error and the phone restarted. After that the phone was stuck in a bootloop. Comes up to the 3e recovery screen.
I'm trying to contact BLU to get the ROM.
I believe the error came from the fact that the phone memory was full. I think it didn't have enough space to do the install.
I am really bummed because I have had the phone for less then a month. And it is a really good phone for the price. If anybody has the Phone (x010q) any provide a backup ROM or even a custom ROM, we will appreciate it.
I am also in this same boat. Kind of regret getting a brand new BLU phone now, used to old Samsungs with stock roms everywhere
Hoping a stock rom/firmware pops up somewhere soon!
Muragami said:
I am also in this same boat. Kind of regret getting a brand new BLU phone now, used to old Samsungs with stock roms everywhere
Hoping a stock rom/firmware pops up somewhere soon!
Click to expand...
Click to collapse
same here. I have the update file, but don't know how to load it.
Got it fixed...
I got my BLU Life One fixed. I ended up paying a BLU Certified Tech to reprogram the phone. Cost me $30. The thing is that It took almost 5 weeks for BLU to release the official ROM.
Mine is fixed. Does anyone know how to backup a Stock ROM. If so let me know and I will post the backup image from my phone.
Investigando e investigando...
guiadodelamano said:
I got my BLU Life One fixed. I ended up paying a BLU Certified Tech to reprogram the phone. Cost me $30. The thing is that It took almost 5 weeks for BLU to release the official ROM.
Mine is fixed. Does anyone know how to backup a Stock ROM. If so let me know and I will post the backup image from my phone.
Click to expand...
Click to collapse
Bueno... aca puedo dejarte un link que me ha servido para hacer varios respaldos de stock rom... tengo el mismo problema... y no se consigue el stock rom para este modelo por ser demasiado nuevo...
https://forum.hovatek.com/thread-1405.html
Hay unos cuantos procedimientos... estos son validos para cualquier dispositivo android... luego por ADB uno puede restaurar el celular...
Gracias por ponerte a la orden...
Try something...
guiadodelamano said:
I got my BLU Life One fixed. I ended up paying a BLU Certified Tech to reprogram the phone. Cost me $30. The thing is that It took almost 5 weeks for BLU to release the official ROM.
Mine is fixed. Does anyone know how to backup a Stock ROM. If so let me know and I will post the backup image from my phone.
Click to expand...
Click to collapse
This link show how you can make a backup... also show many methods to do a backup...
https://forum.hovatek.com/thread-1405.html
I have same cellular and is broken because this update of death... V17...
If you can do a Backup, I try hard to make a restore of this cellular for all...
Thanks a lot...
guiadodelamano said:
I got my BLU Life One fixed. I ended up paying a BLU Certified Tech to reprogram the phone. Cost me $30. The thing is that It took almost 5 weeks for BLU to release the official ROM.
Mine is fixed. Does anyone know how to backup a Stock ROM. If so let me know and I will post the backup image from my phone.
Click to expand...
Click to collapse
If you could do a dump of your rom, that would be great.
http://forum.xda-developers.com/showthread.php?t=2771411
those are the instructions
Hi, I have a Blu Life One X010Q and for some reason the phone got stuck in the BLU logo screen. When I enter in the system recovery I get the message
E:failed to mount /cache (Invalid argument)
E:can't mount /cache/recovery/log
E:Failed to mount /cache (Invalid Argument)
...and other messages like that.
Can anyone give me a hint about how should I procede? thanks in advanced!
rauldinho said:
Hi, I have a Blu Life One X010Q and for some reason the phone got stuck in the BLU logo screen. When I enter in the system recovery I get the message
E:failed to mount /cache (Invalid argument)
E:can't mount /cache/recovery/log
E:Failed to mount /cache (Invalid Argument)
...and other messages like that.
Can anyone give me a hint about how should I procede? thanks in advanced!
Click to expand...
Click to collapse
We need a Stock Rom from this cellular to proceed with a full restore... its the only way... or pay a Technician of BLU to repair the cellphone...
Problem SOLVED...
davidequiz said:
We need a Stock Rom from this cellular to proceed with a full restore... its the only way... or pay a Technician of BLU to repair the cellphone...
Click to expand...
Click to collapse
Thanks to user of XDA 22350 for provide these archives...
BLU Life One 2015 X010Q Stock ROM
Well... after 2 months, somebody can make public this tools...
Please read the instructions inside the zip...
To enter in download mode: You must only with the cellphone power off... plug into the pc... remember the drivers allready be installed... then the download button in the app for flashing its able to clic in...
Regards...
NEED HELP
Hi, I also have a Blu Life One (X010Q) and recently i got the lollipop update but wasnt really happy about it coz of the memory issues (eg. apps installed in the internal memory even with the SD card as preferred installed location and moving or deleting the app doesnt free the memory it previously occupied)
So i rooted and well i removed some system apps and deleted some files in (/system/) apps that i thought was not really useful (I THOUGHT WRONG)
Anyway, after removing them. My phone rebooted. And when it turned back on there was a lot of apps missing including google play and google play services. I tried to reinstall it by downloading an apk file. I successfully installed google play store and google services (and they were on the SD CARD this time) but everytime i try to open the app. It doesn't do anything. So i did a hard reset thinking that might fix it(WRONG AGAIN!!) The app that i installed is gone. And i had to try reinstalling it. But this time i wasn't successful. And then I tried flashing the stock room through recovery but it didnt worked.
E: footer is wrong
E: signature verification failed
installation aborted
So the moron that i am unistalled KINGROOT which also unrooted the phone at the same time and did a hard reset (AGAIN) and then i tried to root it again. Still using kingroot but this time it wont do the job because my wifi wont turn on. And the data only runs on 2G.
So here are the problems that i successfully created for myself
1. WiFi not detecting signal and disabling everytime I exit the settings menu
2. Bluetooth not turning on as well. Disables 20 seconds after turning it on.
3. 2G on mobile data
4. Lost Notification Tray, no more notifications displaying at the top of tje phone. Shortcuts are gone.
5. Received messages cant be opened thus impossible to read, unless the whole message fits on the preview of the message thread. Reply has been disabled, sends a message through compose message or through contacts (send message menu)
5. Opening a browser app (UC, Chrome, Firefox, Dolphin) freezes the phone.
6. The display is upside down (auto rotate disabled)
Is there a way for me to fix this?
is the flashing possible if the phone is stuck in the boot cycle/logo?
Without the phone on, I can't see it recognized by the computer.
msantipolo2015 said:
NEED HELP
Hi, I also have a Blu Life One (X010Q) and recently i got the lollipop update but wasnt really happy about it coz of the memory issues (eg. apps installed in the internal memory even with the SD card as preferred installed location and moving or deleting the app doesnt free the memory it previously occupied)
So i rooted and well i removed some system apps and deleted some files in (/system/) apps that i thought was not really useful (I THOUGHT WRONG)
Anyway, after removing them. My phone rebooted. And when it turned back on there was a lot of apps missing including google play and google play services. I tried to reinstall it by downloading an apk file. I successfully installed google play store and google services (and they were on the SD CARD this time) but everytime i try to open the app. It doesn't do anything. So i did a hard reset thinking that might fix it(WRONG AGAIN!!) The app that i installed is gone. And i had to try reinstalling it. But this time i wasn't successful. And then I tried flashing the stock room through recovery but it didnt worked.
E: footer is wrong
E: signature verification failed
installation aborted
So the moron that i am unistalled KINGROOT which also unrooted the phone at the same time and did a hard reset (AGAIN) and then i tried to root it again. Still using kingroot but this time it wont do the job because my wifi wont turn on. And the data only runs on 2G.
So here are the problems that i successfully created for myself
1. WiFi not detecting signal and disabling everytime I exit the settings menu
2. Bluetooth not turning on as well. Disables 20 seconds after turning it on.
3. 2G on mobile data
4. Lost Notification Tray, no more notifications displaying at the top of tje phone. Shortcuts are gone.
5. Received messages cant be opened thus impossible to read, unless the whole message fits on the preview of the message thread. Reply has been disabled, sends a message through compose message or through contacts (send message menu)
5. Opening a browser app (UC, Chrome, Firefox, Dolphin) freezes the phone.
6. The display is upside down (auto rotate disabled)
Is there a way for me to fix this?
Click to expand...
Click to collapse
Try installing the rom with the software provided by me in the post... follow the instructions inside the zip file... if you brick your phone deleting apps from /system... its impossible to restore it again...
---------- Post added at 04:57 PM ---------- Previous post was at 04:51 PM ----------
vchand09 said:
is the flashing possible if the phone is stuck in the boot cycle/logo?
Without the phone on, I can't see it recognized by the computer.
Click to expand...
Click to collapse
Yes, its possible... remember you need first install the drivers provided by me located in the zip, second open the app and configure to install the rom and third plug with your phone turned off into computer... only do it that the computer can see the download mode, (see the earlier post... and read the instructions inside the zip to configure the app to restore your phone)...
THANK YOUUUUU!! @davidequiz It works!!! had some troubles with the drivers but i got through and my phone works again! So happy
i have the same error message
davidequiz said:
We need a Stock Rom from this cellular to proceed with a full restore... its the only way... or pay a Technician of BLU to repair the cellphone...
Click to expand...
Click to collapse
i have the same error message of @rauldinho
E:failed to mount /cache (Invalid argument)
E:can't mount /cache/recovery/log
E:Failed to mount /cache (Invalid Argument)
...and other messages like that.
and i can not fix with the zip, also i can make all the steps but the phone still in the blu logo, help please
Hi,
I just got the Lenovo Z5. Brilliant little phone but having a few teething issues and not sure if its due to the ZUI OS or i'm missing something in the settings so was wondering if anyone could help with the below issues:
1. There is a notification LED when charging which can be turned on, which i have done but i have no idea how to make any other apps use it eg Gmail, Facebook, Watsapp etc? Coming from a phone that had this as standard makes it annoying if your phone is on your desk and you just want to glance over to see if something requires attention.
2. When a notification comes through the screen doesn't light up so i then have to press the power button to see it. Is there a way to force it to light up on a notification?
3. Sometimes app's won't connect to the internet unless i have the phone unlocked and that is after changing the battery settings. For example Watsapp Web will only connect on my PC if the phone screen is unlocked and active. So its as if the app's aren't passing data back unless the screen/phone is in use.
4. Some apps don't seem to create notifications even though i've changed the OS settings to allow notifications and i know those app's create notifications because they used to on my old phone.
Any help with the above would be much appreciated.
If there is no way of resolving the above is there a way to put a stock android OS on?
Thanks in advance
Also does anyone know how to force the OS to not overlay the screen buttons onto the apps and push the apps up?
Sometimes apps share the same space as the OS buttons which makes it very hard or impossible to use certain app buttons
Thanks
olyolyoly said:
1. There is a notification LED when charging which can be turned on, which i have done but i have no idea how to make any other apps use it eg Gmail, Facebook, Watsapp etc? Coming from a phone that had this as standard makes it annoying if your phone is on your desk and you just want to glance over to see if something requires attention.
Click to expand...
Click to collapse
This seems to be a common problem
olyolyoly said:
4. Some apps don't seem to create notifications even though i've changed the OS settings to allow notifications and i know those app's create notifications because they used to on my old phone.
Click to expand...
Click to collapse
I have the same problem. Permissions seem to revert after a reboot
Hello guys. Recently I did the rom exchange process via QFIL. The first ROM I used was the one that is here in the topics like android 9.0. My device is now frozen in the "ANDROID" screen. I tried other roms that also, at 075, 052, 200, 108. But none worked, I installed twrp, which by the way is working perfectly, and every time I clean it, a message like "Failed to mount '/ persist' ( Invalid argument) ". I do not know exactly what I did wrong, but my cell phone does not leave the infinite loop. I would like to ask for your help, I am from Brazil, and it is difficult to write in another language, so any doubt I try to explain again.
One thing I remembered was that the second time, I accidentally clicked on the "PARTITION MANAGER" option in QFIL. I do not know if that was why. But I have refactored the processes and the problem persisted. If someone has the file "persist" to send, I will test to see if it solves the problem.
Could you fix the cell phone? I'm also from Brazil, I bought this phone and it arrives until Tuesday, I'm looking for a better rom for him and so far nothing, this zui is crap.
Dedezaum said:
Could you fix the cell phone? I'm also from Brazil, I bought this phone and it arrives until Tuesday, I'm looking for a better rom for him and so far nothing, this zui is crap.
Click to expand...
Click to collapse
Meu brother. Consegui instalar umas ROM custom, logo mais mostro como fazer. Siga meu canal "muamba deep" no YouTube.
diogooskamarada said:
Hello guys. Recently I did the rom exchange process via QFIL. The first ROM I used was the one that is here in the topics like android 9.0. My device is now frozen in the "ANDROID" screen. I tried other roms that also, at 075, 052, 200, 108. But none worked, I installed twrp, which by the way is working perfectly, and every time I clean it, a message like "Failed to mount '/ persist' ( Invalid argument) ". I do not know exactly what I did wrong, but my cell phone does not leave the infinite loop. I would like to ask for your help, I am from Brazil, and it is difficult to write in another language, so any doubt I try to explain again.
One thing I remembered was that the second time, I accidentally clicked on the "PARTITION MANAGER" option in QFIL. I do not know if that was why. But I have refactored the processes and the problem persisted. If someone has the file "persist" to send, I will test to see if it solves the problem.
Click to expand...
Click to collapse
Estou na mesma situação, tenho algumas roms, mas não está dando certo. ja resolveu seu problema, me manda um email, [email protected]
Lipeportomendes said:
Estou na mesma situação, tenho algumas roms, mas não está dando certo. ja resolveu seu problema, me manda um email, [email protected]
Click to expand...
Click to collapse
Resolvi sim. Segue lá meu canal. Muamba Deep no YouTube. Tem um tutorial de troca de ROM. E se vc precisar posso te auxiliar em algo mais sobre outros erros. Comenta lá .
diogooskamarada said:
Resolvi sim. Segue lá meu canal. Muamba Deep no YouTube. Tem um tutorial de troca de ROM. E se vc precisar posso te auxiliar em algo mais sobre outros erros. Comenta lá .
Click to expand...
Click to collapse
My apparatus came with a ROM with Portuguese but well boubt, I installed into stock Rom with Chinese and English, now the phone is very good, the problem is the screen does not light up in notifications, this is very bad, Zui 4.0.
delayed notification
there is an system app called Security, open it up and add message apps to the white list
Apps in this list will not be turn off and will receive notification normally.
good luck!:fingers-crossed:
trthehien said:
there is an system app called Security, open it up and add message apps to the white list
Apps in this list will not be turn off and will receive notification normally.
good luck!:fingers-crossed:
Click to expand...
Click to collapse
I use 3.9ZUI, I dont have Security app. Do you know how to enable the LED?
First of all, sorry for my bad english.
Good night, the new phone was submerged in the sea, the touch screen stopped working, after several months I turned it on again and it started working, I took out everything I had and did a factory reset, I don't think so I would have erased everything and I wouldn't have done the reset anyway it was still working. I have started to reinstall everything and the touch has failed again. I try to do a factory reset and when I hit wipe, it asks me to put a number that I can't put because the screen doesn't work.
Please any solution?
Thanks.
txusma34 said:
First of all, sorry for my bad english.
Good night, the new phone was submerged in the sea, the touch screen stopped working, after several months I turned it on again and it started working, I took out everything I had and did a factory reset, I don't think so I would have erased everything and I wouldn't have done the reset anyway it was still working. I have started to reinstall everything and the touch has failed again. I try to do a factory reset and when I hit wipe, it asks me to put a number that I can't put because the screen doesn't work.
Please any solution?
Thanks.
Click to expand...
Click to collapse
You should enable USB debugging and ADB, so you can interact with an app like Vysor from your PC.
SubwayChamp said:
Debe habilitar la depuración USB y ADB, para que pueda interactuar con una aplicación como Vysor desde su PC.
Click to expand...
Click to collapse
The touch screen doesn´t work then I can`t enable usb debugging, I can`t start session because at the begiing I have to introduce the password, and I try to do a factory reset but also I can, because I have to put a number and touch screen doesn´t work.
Thanks