Hello everyone, I hope you are well. I have a problem, please. When I try to download a rom 4 files for my galaxy s6 SM-G920P by checking on binary nature I get a larger file the normal one but after decompression I always end up with a single.tar.md5 file of about 4.5 GB. I repeated the procedure several times but same result.
The name is ALL_SPT_G920PVPS4DRC2_G920PSPT4DRC2_CL11881452_QB17430570_user_low_chip.tar.md5. when I open the file with 7zip I find that there are more files than normal namely param.bin, carrier.img, userdata.img, ZEROFLTE_USA_SPR.pit
Please help me my s6 is stuck on the Samsung splashscreen(it doesn't loop) and doesn't go any further. I tried to flash the 1st ROM but nothing. I no longer have access to recovery but just to download mode please help me save it
Related
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
site
zBurnXz said:
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
Click to expand...
Click to collapse
Where did you bought it?
China
your screwed the only thing you can do is download Chn_Chn Firmware from Samsungs website and flash it though odin. And that's the only fimrware that will work, unless you flash a custom bootloader through your sd card as then it will overwrite the encrypted boot.img allowing you flash any European Firmware.
Hi all
I managed to find a proper CWM recovery for my device Karbon A8 which has no glitches, flashes and works properly.
So I wanted to add custom icon to it. On flashing the downloaded recovery it works correctly whereas on changing the images it doesn't work and is stuck at boot screen
So I unpacked it and then went to ramdsik-contents->res->images and replaced the icon_clockwork.png with desired file and repacked it using kitchen without receiving any errors.
After that I flashed it and rebooted the phone. Phone after showing Karbonn (splash screen) screen goes into a black screen and is stuck there :crying:
I didn't do anything else, didn't change any values just the .png's and flashed.
After that I tried many unpacking and repacking tools but no success. Same problem unpacks and repacks without erros but after flashing stuck at black screen
Can anyone please have a look at this and help.
Please help really need help.
Thanks in advance.!
I use Windows 7 (x64) on my laptop. If someone can try unpacking and adding these images and repacking in ubuntu that might solve the problem. Please anyone help Thanks
Links to images I want to add : icon_clockwork.png
stitch.png
Working Recovery.img (untouched) : Recovery.img
Recovery after repacking : New-Image.img
so you are not stuck, just flash the working recovery, pretty dramatic post imo and wrong forum.
Hi All,
This is the first time I ever tried to install CWM in order to install Lollipop in my Samsung Galaxy Note 1 (N7000) [India]. I flashed ROM "T210.CWM.6.0.4.5.recovery.tar" (attached with thread) using Odin. Uncheked Auto-Reboot option. When I re-started my mobile it shows Samsung Galaxy Note N7000 in startup screen with exclamaion (warning) symbol on startup. After a couple of seconds I can see only horizontal lines and phone shuts down. I see battery charging screen for a second and then device get shutdown. Now Odin cannot detect it and ADB sometimes shows it as offline. Is there any way to fix this problem? Please reply asap. Thanks in advance.
Warm Regards
You need to boot into recovery and flash the ROM from TWRP
Most stock Samsung ROMs dont support custom recovery
Chuck the ROM and the other things you want (Gapps, SuperSU) but make sure they are the right ones for the device and then put them on an external sd card and insert it, there are plenty of tutorials on flashing too
I noticed that the recovery you linked is for a T210, by my knowledge thats for a Galaxy Tab 3 7.0? Which i have running NoleKat 4.4 btw
If it is for another device than yours then its not great news.
Sent from my iPod touch 5 using Tapatalk
As P_Wheeler said, your recovery file is for a different phone , this will create unstable systems / bootloops / errors.... F
irstly make sure you can get your phone back to stock, then flash the right recovery tru ODIN, and install your ROM in recovery...
Hi everybody,
Does anyone know where can I find an official ROM file (.img format) for a Note 4 N910C model for a model purchased in Mexico? I need to flash it from my sd card since I'm having some problems during the boot loop. (It' gets stuck after Samsung Logo and reboots alone)
Any suggestions, please, to solve this problem asap? I have tried many ways found in the web (flashing with odim3 can't be done due to fail warning while selecting start), hard reset, wiping cache partition, without much luck. Really, this is driving me crazy.
Thanks a lot for you help.
Cheers
Fede
Greetings
My note 8 (model SM-950W ) started boot looping after a new battery and/or a slight screen crack
I can still get into recovery mode and download mode
However there is FRP Lock and I cannot boot to disable it
I tried using ODIN in various ways to flash other files but it always said the process failed.
I tried following a tutorial on here:
and i points me to download a file hosted on Mediafire that does NO LONGER exist. THe file is found here: https://pangu.in/download-firmware-note8-note7-note5-note4-note3-note2/ and the file is N950WVLU1AQI5_N950WOYV1AQI5_XAC_7.1.1_4file.zip
It no longer exists.
Can someone assist me in trying to find substitute file/process to get my phone working again BUT this time with TWRP and a custom rom or stock rom?
got it working FINALLY! After 2 years of trying once in a while
I had to reflash it with factory stock image with Odin
The solutions were found here
(COLLECTION) STOCK / FULL ROM FOR SAMSUNG GALAXY NOTE 8 (SM-N950) - addROM
(COLLECTION) STOCK ROM (FULL 5 FILE) FOR SAMSUNG GALAXY NOTE 8 “Full Firmware” is firmware 4 file or 5 file (BL_ , AP_ , CP_ , CSC_ , EFS_ ,…), sometimes is a single file (All_…) and include the standard PIT files. When you flash “Full Firmware” & PIT files, all devices partitions will be...
addrom.com
now my problem got worse and I cant charge the phone and there's a connector that broke. Must brick this phone now! Shoot!