[9][OFFICIAL][WEEKLY] CarbonROM | cr-7.0 [shamu] - Nexus 6 Original Android Development

[9][OFFICIAL][WEEKLY] CarbonROM | cr-7.0 [shamu] - Nexus 6 Original Android Development

Thank you very much to give us a chance to have a look at your developing work!!
Can you give us a recommendation for Gapps? That would be great!

MartinN6 said:
Thank you very much to give us a chance to have a look at your developing work!!
Can you give us a recommendation for Gapps? That would be great!
Click to expand...
Click to collapse
@camcory built some for arm. You can find them here: https://drive.google.com/open?id=1OH9N2UGTr_ZPi-zNaerFpxH9W5zQY89D
They should work fine but I didn't test them personally yet.

Myself5 said:
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
NOTICE: THIS IS AN EARLY BUILD FROM OUR TESTING BRANCH. There will be changes in the release branches like changed/removed features or similiar.
BUGS:
Encryption is not working. Don't try to encrypt. It WILL break.
Due to the broken encryption, you need to format /data before booting, so backup your data.
Mobile connection (RIL) can be broken after reboots. To fix that, enter *#*#4636#*#*, go to Phone information and enable "Mobile Radio Power". It's working fine afterwards.
Please feel free to look, build, and use our code at CarbonBeta's GitHub...
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! These builds are experimental and can contain Bugs (as listed above). Make sure to do backups.
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
5) Please keep bugreports to this thread or Discord. Do NOT create a Jira ticket. This is still in early development so we don't accept any bugreports yet.
Download
Download Mirror
Join the CarbonROM Discord server
GitHub
Kernel source
Big thanks to @camcory for his help with the Devicetrees.
Mod Edit: Removed offensive comment
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
CarbonBeta, ROM for the Nexus 6
Contributors
Myself5, CarbonROM
Source Code:https://github.com/CarbonBeta
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Beta
Created 2018-08-21
Last Updated 2018-08-21
Click to expand...
Click to collapse
Thanks so much.
Can I test I mention the bugs that I encounter here?
Also, do you have a list of included features, sir?.
Thanks once again

That´s what I did/flashed:
- CARBON-CR-7.0-TBA-UNOFFICIAL-shamu-20180820-2151.zip
- MindTheGapps-9.0-arm-20180816_155447.zip
- Magisk-v16.7.zip (root)
systems starts without any issue ... acscess to Google account ...
install Titaniumbackup and restored a few apps ... works
dialer (RIL) - mobile data - wifi - camera - ... works
ok, let´s work and wait for issues
BIG Thanks to the the Devs - Myself5 / camcory / ... other as well!
With great respect for your work!!!

wauw this rom is working well on my shamu. Thanks dev!

Great start man with tasty Pie! Besides the minor issues of not getting the theme dark color to work, the only other thing when I reboot it told me I was in airplane mode...but that stuff I'm sure will be dealt with. Keep up the great work, love this.
+1000

I don't know the history but I am immensely grateful to everyone. I looked up the githubs mentioned, understood some of the changes, and feel far less useless now. This must be insanely timeconsuming and predictive if there's no quick method to compile parts and test. We should be grateful.

revparadigm said:
Great start man with tasty Pie! Besides the minor issues of not getting the theme dark color to work, the only other thing when I reboot it told me I was in airplane mode...but that stuff I'm sure will be dealt with. Keep up the great work, love this.
+1000
Click to expand...
Click to collapse
Interesting. Was the QS Button green and the statusbar icon there (so was it fully enabled?) or was the mobile data just disabled as listed on the Bug list?
I'm trying to get as much information about that issue as possible as it's really bugging me, lol.

* * * Thread Cleaned * * *
Alrighty then, hopefully everyone got that out of their systems. Let's review a few things real quick-like before the cyber bloodshed goes any further:
Forum Rules apply to EVERY member, regardless of title, time in Xda, skill/talent, or significance of contribution to Xda.
What that means in simple, so easy a caveman could understand it terms; no insulting, disrespect, personal attacks, rude or profane comments, and when in a development thread, all posts need to be directly related to the work in the title of the thread.
Most of those involved in this display of testosterone know better, and should consider this a polite, courtesy warning to please keep the school yard banter OFF Xda and on Facebook, Insta, Reddit or any other social media platform where this sort of thing is welcomed.
If you have legit complaints about someone's actions or their work, use the REPORT function.
Let's not antagonize, create drama, or poke the bear so-to-speak by inviting trouble.
Any bad blood, personal issues, or personal beefs need to find somewhere else to be handled.
Please, let's all get back to observing Forum Rules, commenting only on the development going on here, and let's keep things civil, and respectful.
Your help, and attention are much appreciated. Thanks.

If there is an issue that needs to be addressed, try the REPORT function to identify the problem.
There is no reason for a Moderator to read the entire OP when cleaning a thread, especially if the offensive comment was not even reported.
By the time the reported comments were deleted, and PMs were made, the unreported comment in the OP was edited.
You guys spent more time complaining about something I didn't even know existed, rather than just reporting it.
If there are any further questions, please PM me and keep it out of the development thread.

Thank you. Thank you. Thank you, for keeping our Nexus alive.
I shall flash this when I get back home and report back!
Thanks again. Nexus 6 deserve this kind of efforts and you deserve even more appreciation.

So my device is already unencrypted, I've always ran my shamu that way. Do I still need to format my userdata or is it good to flash? Thanks! @Myself5
Also, Magisk working for root?

H4X0R46 said:
So my device is already unencrypted, I've always ran my shamu that way. Do I still need to format my userdata or is it good to flash? Thanks! @Myself5
Also, Magisk working for root?
Click to expand...
Click to collapse
I _should_ be fine, but I can't guarantee it. I would recommend making a backup. Better be safe than sorry.
Magisk should be working fine.

Myself5 said:
Interesting. Was the QS Button green and the statusbar icon there (so was it fully enabled?) or was the mobile data just disabled as listed on the Bug list?
I'm trying to get as much information about that issue as possible as it's really bugging me, lol.
Click to expand...
Click to collapse
The second I swiped for home screen after boot up, I got a notification it was in Airplane mode, but the mode wasn't enabled so I toggled the Airplane mode on and then off.. . I got LTE signal after that just fine.

can anyone share some screenshots? home recents..... thanks

Myself5 said:
I _should_ be fine, but I can't guarantee it. I would recommend making a backup. Better be safe than sorry.
Magisk should be working fine.
Click to expand...
Click to collapse
Alright, so I flashed it, and I am (expletive here) impressed! This build runs so freaking well! I'm gonna continue to test and see what I find, but so far this is running awesomely! I'll report back. Thanks man!

Don't try to encrypt? What is there to encrypt, and how can I avoid it? I would love to try pie on nexus, but I don't understand if I should be avoiding certain apps or actions

I know you are saying I need to wipe /data if encrypted, but don't I need to wipe /internal storage too? This is awesome to see these rolling out so quickly, you guys are brilliant!

installed the rom . amazing fast boot time .. clean & smooth
nice effort thank you. waiting for the stable release to see some customizations built in it. Thanks guys.

Related

[7.x.x][WEEKLIES] CarbonROM | cr-5.1 [z3]

Hi. Thanks for release. Camera has bad quality ? Will test rom soon.

malacha said:
Hi. Thanks for release. Camera has bad quality ? Will test rom soon.
Click to expand...
Click to collapse
Camera is as "good" or bad as it is on other Roms. No specific camera adjustments were done.

Does It support d6633?

Greaeaeaeaeaeat guys!!!!! Thanks!!!! Happy New Year!!!)))
---------- Post added at 10:32 AM ---------- Previous post was at 10:31 AM ----------
I will test it soon

GREAT new year present! Thank you! I will test when I have time.
Sent from my D6603 using Tapatalk

Please support the dual version of Z3(d6633), This can be my only hope to use my phone with Nougat ?

I flashed the rom, it all worked normal but the camera.
I kept getting the "Can't connect to the camera" error. Then I retried to reflash the ROM but without gapps or SuperSU, but even like that it didn't work.
(Sorry for bad english, not my main language)
http://imgur.com/a/0vIeU (Link to the image of the error)

Sherif Abdl-Naby said:
Please support the dual version of Z3(d6633), This can be my only hope to use my phone with Nougat ?
Click to expand...
Click to collapse
the DualSIM Z3 requires additional Model blobs and testing. As nobody in the team owns a Z3 DSDS, we unfortunally can't support it.
PauloHHB said:
I flashed the rom, it all worked normal but the camera.
I kept getting the "Can't connect to the camera" error. Then I retried to reflash the ROM but without gapps or SuperSU, but even like that it didn't work.
(Sorry for bad english, not my main language)
http://imgur.com/a/0vIeU (Link to the image of the error)
Click to expand...
Click to collapse
I think I know why. I'll look into it. Was my fault as on my testing builds I always ran userdebug builds, but our releases were "user" builds, so the Cam is very likely broken thanks to SELinux or something like that. I will research it right away.

So, we should avoid this version and wait until the camera is fixed?

zouden said:
So, we should avoid this version and wait until the camera is fixed?
Click to expand...
Click to collapse
I fixed it already and restarted the builds. CARBON-CR-5.1-MOO-WEEKLY-leo-20170101-1528 should be fine.

Happy new year and prosperity for your whole family. @Myself5
I have tried the rom and there is a rendering in the animation of the system that is very little but it is enlarged when many processes are executed for example when you get many notifications to the time and also when you have many open applications.
There is also a conflict when passing files to the microSD from the PC sen que qeda making the copy and never pass the file is like a problem reading and writing.
This rom works fine on my Z3 with the panel replaced as there are roms with kernels 3.10 that do not work on devices with replaced panels.
This rom has that scent when it used android N DP for the Z3.
Thanks @ Myself5 is a great job.

Is this rom suitable for everyday usage? Thank you for your hardwork!

yecomixer said:
Happy new year and prosperity for your whole family. @Myself5
I have tried the rom and there is a rendering in the animation of the system that is very little but it is enlarged when many processes are executed for example when you get many notifications to the time and also when you have many open applications.
There is also a conflict when passing files to the microSD from the PC sen que qeda making the copy and never pass the file is like a problem reading and writing.
This rom works fine on my Z3 with the panel replaced as there are roms with kernels 3.10 that do not work on devices with replaced panels.
This rom has that scent when it used android N DP for the Z3.
Thanks @ Myself5 is a great job.
Click to expand...
Click to collapse
Is your SDCard exFat formatted? We still need to add support for that, but its on the todo list
For the animation stuff, I can't do much. I've been told that the newest QCOM adreno blobs improve the GPU experience, I'll see if I can build them into the next release.

Thanks @Myself5.
Guys, what bugs did you encounter in the current versions?

Sorry for asking this question @Myself5.
At the moment of a new update will be received a notification-download from the rom or will be made an installation from the recovery with zip file?
This question is because I have installed the update that corrects the error of the camera and I deleted the Gapps and the good thing is that I have only left the apps that I downloaded from the PlayStore, in a few words what would be the appropriate procedure for Install a new ROM construction.

yecomixer said:
Sorry for asking this question @Myself5.
At the moment of a new update will be received a notification-download from the rom or will be made an installation from the recovery with zip file?
This question is because I have installed the update that corrects the error of the camera and I deleted the Gapps and the good thing is that I have only left the apps that I downloaded from the PlayStore, in a few words what would be the appropriate procedure for Install a new ROM construction.
Click to expand...
Click to collapse
There is no Updater implemented yet (its another item on the todo list though).
When you update you _should_ be able to just flash the ROM, GApps should survive. If thats not the case, as it seems to be for you ATM, I'll look into that.
Till then, just flash the ROM and GApps afterwards.

maybe it's a silly question but why "moo" ?
And could we have a working / non working list ? From the devs, or from anyone else ?
Thanks anyway for this Rom !

Wow. I can't believe someone's still making ROMs for Z3 O_O Great! I'm gonna check it out soon. Thanks for Your hard work, @Myself5 !

Agred said:
Wow. I can't believe someone's still making ROMs for Z3 O_O Great! I'm gonna check it out soon. Thanks for Your hard work, @Myself5 !
Click to expand...
Click to collapse
Yes! Exactly what I was thinking.... Why are we still making roms for the Z3..? :silly:

[7.x.x][WEEKLIES] CarbonROM | cr-5.1 [bacon]

Reserved
Feel free to post any bug you find on a proper way:
1. Build you are running
2. Mods you are using: music mods, magisk, whatever.
3. How to reproduce it.
4. Logcat, ksmeg... if applicable.
I would like this thread to be an example of a development thread so please:
1. Be respectful with each other.
2.READ a couple of times the OP before posting. If there is anything that is not in the op and should be there just let me know.
3. Search before posting, maybe your question is already answered.
4. Features request are allowed, but it doesn't mean I will fulfill all of them. And they are not they reason behind this thread.
That's all for now. Enjoy CarbonRom

Huge thanks to @Myself5 and @kwoktopus for the help, and to the whole CarbonRom team in general.
Also to @Setting.Out for being an awesome tester.
Known bugs:
1. Panorama force closes on default camera.
2. Search inbuilt in settings sometimes crash.
3. Automatic scheduled night light does not work.
Use the customised schedule option for now.
Please report any bug you find on a proper way.
Screnshots:

First

I have been building this for a while now, but I didn't make a xda thread so here it is.
Please READ the op and the reserved post.

darjwx said:
I have been building this for a while now, but I didn't make a xda thread so here it is.
Please READ the op and the reserved post.
Click to expand...
Click to collapse
About time.. Lol
Good job, I'll try this soon..

awesome, carbon is here

Thanks a lot. Only 2 questions.
Support substratum?
And are rooted or need to flash any zip for it.?
Again. Thanks
Enviado desde mi A0001 mediante Tapatalk

vpimentel said:
Thanks a lot. Only 2 questions.
Support substratum?
And are rooted or need to flash any zip for it.?
Again. Thanks
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
Substratum is supported. (Root and rootless mode)
If you want root you have to flash it separately.

Am i the only one getting stuck at the "Format system" part on the installation procedure of the rom?
I tried to install it two times with different recoveries (latest unofficial twrp tugapower and another one which i don't remember the name) and it happens the same problem, however with other roms this doesn't happen.
Maybe there is something wrong with the updater-script or i had a bad download, can anyone confirm? Anyway i'm going to see if a recovery log of the event has been stored, because i had to force a reboot.

mustang_ssc said:
Am i the only one getting stuck at the "Format system" part on the installation procedure of the rom?
I tried to install it two times with different recoveries (latest unofficial twrp tugapower and another one which i don't remember the name) and it happens the same problem, however with other roms this doesn't happen.
Maybe there is something wrong with the updater-script or i had a bad download, can anyone confirm? Anyway i'm going to see if a recovery log of the event has been stored, because i had to force a reboot.
Click to expand...
Click to collapse
I forget to post it. It takes quite a lot to get flashed. I have been investigating it but i could not found the problem. I will continue looking though.

Well, I just installed and configured the ROM. And I come to contribute what in my point of view, would come well to implement if possible
1 can choose single-double actions-keeping the touch of the physical buttons. In addition to being able to remove the illumination of said buttons.
2 you can apply the blur / blur effect to the notifications panel
3 at least two levels of screen size settings.
And for the moment is what made in lack of other roms ..... anything I fell in mind the comment here
Edit: 4 possibility to choose how many columns are desired in the Settings
Enviado desde mi A0001 mediante Tapatalk

vpimentel said:
Well, I just installed and configured the ROM. And I come to contribute what in my point of view, would come well to implement if possible
1 can choose single-double actions-keeping the touch of the physical buttons. In addition to being able to remove the illumination of said buttons.
2 you can apply the blur / blur effect to the notifications panel
3 at least two levels of screen size settings.
And for the moment is what made in lack of other roms ..... anything I fell in mind the comment here
Edit: 4 possibility to choose how many columns are desired in the Settings
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
1. You can choose double tap and long press actions. I will look into single press actions.
2. I don't think that will be merged.
3. I will look into it.
4. That's been reviewed on gerrit.

Hello ! Is this ROM contains :
- 3 state location in status bar ;
- Force volume keys to control media stream ;
- mute intellegent (flip to silent) ?
These options are very important for me. Thanks !

darjwx said:
I forget to post it. It takes quite a lot to get flashed. I have been investigating it but i could not found the problem. I will continue looking though.
Click to expand...
Click to collapse
Ok, just to let know everyone: for me it took 9 minutes and 30 seconds to be completed the instalation.
Here you have a recovery log of the installation process in case it can be helpful: http://pasted.co/059b7a93, although i don't see much relevant information besides this:
Code:
carbonrom.org
Formatting /system
Formatting /system
Creating filesystem with parameters:
on those lines (2294 and 2295) It seems that the "formatting /system" procedure is done twice, but i don't find it logical as it's not repeated on the updater-script of your rom, so maybe it's not a problem.
I saw that the content of the zip of your rom (system directory) is packed like the Kit Kat days, i mean in the system directory of your rom contains everything there but in other roms like Resurrection Remix and all the ones i have saw from Android 5.1 to 7.1 are packed as "system.new.dat" and in the system directory there is only the build-prop, so i think, from my low dev skills, that might be the source of the problem. Also the updater-script of your rom compared for example with the one from Resurrection Remix Nougat differs on the mount and format procedures of Data and System.
Besides that pretty solid rom :good:

I will be traveling for a few days today, so I won't be able to work on this.
Sorry guys, i will look into those things when i came back.

mustang_ssc said:
Ok, just to let know everyone: for me it took 9 minutes and 30 seconds to be completed the instalation.
Here you have a recovery log of the installation process in case it can be helpful: http://pasted.co/059b7a93, although i don't see much relevant information besides this:
on those lines (2294 and 2295) It seems that the "formatting /system" procedure is done twice, but i don't find it logical as it's not repeated on the updater-script of your rom, so maybe it's not a problem.
I saw that the content of the zip of your rom (system directory) is packed like the Kit Kat days, i mean in the system directory of your rom contains everything there but in other roms like Resurrection Remix and all the ones i have saw from Android 5.1 to 7.1 are packed as "system.new.dat" and in the system directory there is only the build-prop, so i think, from my low dev skills, that might be the source of the problem. Also the updater-script of your rom compared for example with the one from Resurrection Remix Nougat differs on the mount and format procedures of Data and System.
Besides that pretty solid rom :good:
Click to expand...
Click to collapse
It's packed like that because the builds are file based. Other ROMs are block based and that's why you see the .New.dat files.
File based builds are normally slower than block based. That partially explain why it takes so much. But 10 minutes is a lot even for a file based build imo.
I returned home yesterday. I have been comparing some carbon stuff with omnirom ones, which is also file based, but no luck yet.

Meanwhile, I have got a test build with oneplus2 doze package added. It seems to be working fine. I'm running it atm.
https://www.androidfilehost.com/?fid=745425885120724125

Testing right now a 7.1.2 build. If all goes well (it should) I will post the link tomorrow .

New 7.1.2 build.
I have been running it since yesterday and I have not found any problem. If you flash this, please use an updated gapps package. Dynamic gapps are not updated yet, so I suggest to use @Setting.Out slim revisted gapps.
https://www.androidfilehost.com/?fid=673368273298947282

[8.1.x][WEEKLIES] CarbonROM | cr-6.1 [bacon]

Reserved
Feel free to post any bug you find on a proper way:
1. Build you are running
2. Mods you are using: music mods, magisk, whatever.
3. How to reproduce it.
4. Logcat, ksmeg... if applicable.
I would like this thread to be an example of a development thread so please:
1. Be respectful with each other.
2.READ a couple of times the OP before posting. If there is anything that is not in the op and should be there just let me know.
3. Search before posting, maybe your question is already answered.
4. Features request are allowed, but it doesn't mean I will fulfill all of them. And they are not they reason behind this thread.
That's all for now. Enjoy CarbonRom

Reserved
Huge thanks to the CarbonROM team as a whole for being awesome.
Also to @Agent_fabulous as I took his trees as a base.
Known bugs:
1. HDR is a bit buggy in Snap
You tell me
Please report any bug you find on a proper way.
Screenshots: (More coming soon)

Good work :good:

thanks

at last!!!!!
thanks!

Smoothness at its ultimate best. You made our wait worth!! Thank you for still maintaining this legendary device. Device = legendary so maintainer= legendary.

wow, i'll try.. thanks

So far everything working well. If u guys facing some bugs that menioned in OP, you have to try it.
-HDR working well with bacon op5 cam.
-lockscreen pattern/pin actually work, but if u have freeze on screen u have to wait it required 5-10 minutes.
ROMs is very smooth even i set the value windows n transition anim scale to 1 tho. GPS lock fast, never happened in other oreo ROMs before that ive ever tried. Face unlock, substratum, Magisk, xposed, n some module are working well. Battery backup?? Let me see..
Dear Dev, hope smartbar will be implemented for next build. Thank you, n keep up for the good work.
Regards.

insomnia11 said:
So far everything working well. If u guys facing some bugs that menioned in OP, you have to try it.
-HDR working well with bacon op5 cam.
-lockscreen pattern/pin actually work, but if u have freeze on screen u have to wait it required 5-10 minutes.
ROMs is very smooth even i set the value windows n transition anim scale to 1 tho. GPS lock fast, never happened in other oreo ROMs before that ive ever tried. Face unlock, substratum, Magisk, xposed, n some module are working well. Battery backup?? Let me see..
Dear Dev, hope smartbar will be implemented for next build. Thank you, n keep up for the good work.
Regards.
Click to expand...
Click to collapse
Agent fabulous trees?

insomnia11 said:
So far everything working well. If u guys facing some bugs that menioned in OP, you have to try it.
-HDR working well with bacon op5 cam.
-lockscreen pattern/pin actually work, but if u have freeze on screen u have to wait it required 5-10 minutes.
ROMs is very smooth even i set the value windows n transition anim scale to 1 tho. GPS lock fast, never happened in other oreo ROMs before that ive ever tried. Face unlock, substratum, Magisk, xposed, n some module are working well. Battery backup?? Let me see..
Dear Dev, hope smartbar will be implemented for next build. Thank you, n keep up for the good work.
Regards.
Click to expand...
Click to collapse
We have no plans in adding smarbar sorry.

I'm getting "E3004: This package is for "bacon,A0001" devices this is a " " ."
Updater process ended with ERROR: 7
While flashing with twrp, please help
---------- Post added at 06:57 PM ---------- Previous post was at 06:50 PM ----------
E3004: This package is for "bacon,A0001" devices this is a " ".
Updater process ended with ERROR: 7
I'm getting this when flashing through twrp. Please help.

jahraKaL said:
I'm getting "E3004: This package is for "bacon,A0001" devices this is a " " ."
Updater process ended with ERROR: 7
While flashing with twrp, please help
---------- Post added at 06:57 PM ---------- Previous post was at 06:50 PM ----------
E3004: This package is for "bacon,A0001" devices this is a " ".
Updater process ended with ERROR: 7
I'm getting this when flashing through twrp. Please help.
Click to expand...
Click to collapse
what's your twrp version?

se7enlyn said:
what's your twrp version?
Click to expand...
Click to collapse
Twrp 3.1.0.0
edit: nvm, i updated twrp to 3.2.1.0 and now flashing perfectly. Thanks.

Hi,
tryed new rom, everything seems working well except one thing:
after first reboot, i can't no more pull down the status bar. Anything i try to do, the bar seem locked.
any idea?

Awesome work. Like the ROM so far. Weekly updates are one reason sticking to this one is a must. Appreciate the time spent on this Oreo ROM.

vivmar said:
Hi,
tryed new rom, everything seems working well except one thing:
after first reboot, i can't no more pull down the status bar. Anything i try to do, the bar seem locked.
any idea?
Click to expand...
Click to collapse
You're not talking about during setup, right? Because that always looks status bar...
Major kudos on this ROM release btw! Bacon 4evah ?

Aside from the custom font probably missing some international characters, if I'm not mistaken, we can't control the hardware keys backlight (in my case, the backlight is disabled by default). Other than that it's definitely my daily driver

i didn't experience any freeze after implementing pattern screen unlock. but, that was because i left that for last, after installing all my apps and letting the rom settle down.

so oreo stable CUSTOM builds from legends have started to flow out for bacon now..
gr8 job @darjwx, thanks mate.
regards

[CLOSED][ROM] [OFFICIAL] BlissRoms v12.10

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
team bliss is pleased to present to you
bliss rom based on Android 10
Our focus is to bring the Open Source community a quality OS that can run on all your devices as a daily driver, syncing your apps + settings + customizations across all platforms you run Bliss on.
Bliss ROMs comes with a wide selection of customization options from around the Android community as well as unique options developed by our team. With so many options available, you’ll find it hard not to enjoy the Blissful experience.
AIO Thread
Bliss Source
https://github.com/BlissRoms
BlissRoms Device Sources
https://github.com/BlissRoms-Devices
Bliss Device Downloads
S8 (Exynos, dreamlte) - SourceForge
S8+ (Exynos, dream2lte) - SourceForge
We recommend flashing OpenGApps ARM64 10.0 with our ROM if you need GApps. You can get it here:
OpenGapps Project
Team Bliss is not responsible in any way for anything that happens to your device in the process of installing
Please familiarize yourself with flashing and custom rom use before attempting to flash the rom. Please make sure you download the correct version of Bliss for your specific device. The links are labeled clearly.
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Bliss Rom & the latest GApps package
Boot into recovery
Backup your current ROM (and EFS partition)
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash Bliss Rom
Flash Google Apps package
Flash Root of your choice(Unless OP states otherwise)
First boot may take up to 10 minutes. This is due to Gapps and root optimization.
Same as @Stricted's LineageOS project:
Permissive SELinux
Screen cast not working
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you and our team quite some time.
Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
After downloading the Catlog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving.
As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the forum with a brief description of the error.
@Jackeagle @electrikjesus @rwaterspf1 @Makaveli_da_dev @ElfinJNoty @BitOBSessiOn @customworx
@nilac @sixohtew @aclegg2011 @Roger.T @T.M.Wrath @kanttii @rev3nt3ch @techfreak243 @SuperDroidBond @USA_RedDragon @bcrichster
@deadmanxXD @krittin98 @BlackScorpion @techexhibeo @droidbot @siphonay @pacer456 @nitin1438 @theGeekyLad @kunalshah912 @regalstreak @lordarcadius
@ideaman924 @ideaman924[/B]
Huge thanks to @Stricted for allowing me to use his device tree and kernel! Go check out his source here: https://github.com/exynos8895
A huge thanks to Chainfire, CM/LineageOS, Android-x86, Jide, @farmerbb & all the other developers who work hard to keep all the great features coming!
We really appreciate all your knowledge & hard work!
Team Bliss aims to develop and maintain various OS & software projects for educational and the Android community building purposes. Team membership consist of and provides:
training, development opportunities, design opportunities, build servers, download servers, design & development software,as well as professionals and mentors in all fields revolving around Android development.If someone wants to donate, please do so via this PayPal link:
PayPal Link
WE ARE A U.S. FEDERAL NON-PROFIT ORGANIZATION (501c3)
We receive a small donation each time you make a purchase with “Amazon Smile”:
https://smile.amazon.com/ch/82-3580195
Notice
The OP and most recent discussions will generally help to answer any questions you will encounter. If not, we will do our best to answer your questions & concerns as soon as possible.
We will also simply direct you to the OP if the answer is contained there. We encourage community minded interactions: users helping fellow users allows Team Bliss to focus on the work involved to make things Blissful.
Please do not ask for ETA's
We will not tolerate any rudeness or anyone being disrespectful in this thread. Moderators, feel free to enforce anything you feel is necessary to stop bad posts
Team Bliss will allow some minor off-topic comments in our development threads. Please post in the general forums for off-topic comments and/or questions. Overall, please keep comments relevant to development, as this better helps you and our teamwhen trying to determine problems that users are having. We appreciate all levels of knowledge in our threads, and therefore we ask that the seasoned members be helpful to those with less knowledge. Most importantly, do NOT troll those with less knowledge than yourself.
Should you feel inclined to not abide by our request, the XDA Moderators may be called in to remove posts. We thank you for adhering to our thread rules.
Website
https://blissroms.com
Official Platform Links
https://www.facebook.comBlissFamilyOfROMs
https://twitter.com/Bliss_ROMs
https://www.instagram.com/blissroms
Thank you for using Bliss! And as always: #StayBlissful
XDA:DevDB Information
BlissRoms, ROM for the Samsung Galaxy S8
Contributors
ideaman924
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: 12.10
Stable Release Date: 2020-08-04
Created 2020-06-18
Last Updated 2020-08-09

Reserved
FAQ
Q: Can I flash S8+ builds on S8 (or vice versa)?
No! Can't believe I have to make a FAQ entry for this. So many PMs asking. Obviously you can't flash an S8+ build on an S8 or vice versa!
Same goes for Note 8 - no, you just can't flash S8/S8+ builds on your Note 8 and expect it to work.
If you have done so then your device will probably be softbricked (or worse, I've never done it). Use Odin to restore to stock and try again, or alternatively flash a correct build for your device.
Q: The statusbar icons are cut off! Why?
If you haven't updated yet, please do so now. Latest versions have the fix for this.
If you are on an older version, or if you have updated and the changes are not sticking, then go to the Settings app, Blissify, More, Rounded corners, and then set "Statusbar extra padding" to 24 dp.
Again, these steps are unnecessary if you clean flash the latest version as I have fixed it there.
Q: I don't see the uploaded build yet. What's going on?
It takes some time for uploaded artifacts to sync across to all servers. During that time you may see no file uploaded or potentially get an incomplete download. We always recommend flashing with the MD5 file so that TWRP can make sure the build is not damaged before you flash it.
Q: Where are the Note 8 downloads?
I don't have a Note 8. As for the S8, those were uploaded with the help of test volunteers. Note 8 builds may be possible in the future but for now there are none.
And that's it! If I have forgotten anything post here or send me an email. Thanks!

Reserved

Thanks mate. 1 more official ROM for our sexy phone.

Hey. Thank you for the ROM. Will download today
Does your ROM support ota ?

Does this support dreamlte

ballerd said:
Does this support dreamlte
Click to expand...
Click to collapse
I recommend u to read the thread again especially first comment

Great news for that rom I've bern using on farmer phone.
Waiting for dreamlite ...

Hi, I can't download even if I have a more exynos s8 + ?

Hello, can use the Rom to save photos from the camera to SD card ?
Sent from my SM-G955F using XDA Labs

Would this not be posted in a wrong forum, as it is not cross developed?

tqshdq said:
Would this not be posted in a wrong forum, as it is not cross developed?
Click to expand...
Click to collapse
Most people with S8+, myself included check more the S8 forum since it's more active, so I think it's fine

panchovix said:
Most people with S8+, myself included check more the S8 forum since it's more active, so I think it's fine
Click to expand...
Click to collapse
Could've at least stated that it is for S8+ only in the title.
I think it's a good policy to not build for devices you do not own, but I still feel like this should have been posted in the S8+ Rom-section.

Hi. I am going to test the rom, I am intrigued, a question the internal audio when recording screen is impossible? what happens to the gcam? works?

I can test for dreamlte, if you need a few

Thanks for new ROM ?

Hi. Very awesome rom. Been testing and playing around with it and I am in love. Very nice job whoever put time and work to make this rom for our s8plus. It's very smooth and battery friendly!!
However, I would like to point out a few things that I am experiencing.
1) There are some weird blue colours on google now and Spotify. See screenshots.
2) Aod doesn't work when I set the settings to show always. Well, it doesn't show always so I assume it's a bug or smth.
3) Theming. When I change theme background from default to another, Google keyboard doesn't change to white when white theme is on. I use global day theme during day and night during night. It's not a big deal, but if it's possible to somehow fix that, that would be great.
So far that's the only little issues I experienced. Other than that, it's super awesome rom. Thx again guys !!!

Forgot to mention one other small, non essential little thing hehe.
Is it possible to make that weather widget a bit more visible ? Like more whiteish ?

it is perfect and fluid. nothing to reproach, but the battery life is very short ...

DKT25 said:
Hey. Thank you for the ROM. Will download today
Does your ROM support ota ?
Click to expand...
Click to collapse
Yup, OTA support is there! Backuptool works so you don't have to flash GApps after dirty flashing, either.
Nini.as said:
Hi, I can't download even if I have a more exynos s8 +
Click to expand...
Click to collapse
What do you mean? The download and flash should work as long as your S8+ has an Exynos chipset.
lataldragon said:
Hello, can use the Rom to save photos from the camera to SD card ?
Sent from my SM-G955F using XDA Labs
Click to expand...
Click to collapse
Should work, here, let me test.
I just tested and Google Camera apparently stores to internal by default. Not sure where the setting is to toggle to SD card. But I'm pretty sure it's possible with apps like Open Camera.
Lukakuu said:
Hi. I am going to test the rom, I am intrigued, a question the internal audio when recording screen is impossible? what happens to the gcam? works?
Click to expand...
Click to collapse
Google Camera works, although there is a slight layout bug when switching to the video record mode. Still working on that...
ImKiira said:
I can test for dreamlte, if you need a few
Click to expand...
Click to collapse
Great! Read the bottom of this post please. Thank you for volunteering!
DKT25 said:
Hi. Very awesome rom. Been testing and playing around with it and I am in love. Very nice job whoever put time and work to make this rom for our s8plus. It's very smooth and battery friendly!!
However, I would like to point out a few things that I am experiencing.
1) There are some weird blue colours on google now and Spotify. See screenshots.
2) Aod doesn't work when I set the settings to show always. Well, it doesn't show always so I assume it's a bug or smth.
3) Theming. When I change theme background from default to another, Google keyboard doesn't change to white when white theme is on. I use global day theme during day and night during night. It's not a big deal, but if it's possible to somehow fix that, that would be great.
So far that's the only little issues I experienced. Other than that, it's super awesome rom. Thx again guys !!!
Click to expand...
Click to collapse
1. Yup we know of the blue color issue. It's a source-side bug. Some people report it so we're trying to nail it down.
2. I'll test AOD more and get back to you.
3. Also will look into this theming issue, although this one sounds more like a bug in Google Keyboard.
DKT25 said:
Forgot to mention one other small, non essential little thing hehe.
Is it possible to make that weather widget a bit more visible ? Like more whiteish ?
Click to expand...
Click to collapse
Source-side, I'll contact the team members
--------
Hello everybody! Hope you are enjoying BlissRoms. A new build will go out today with the following changes:
- Fixed rounded corners by default
If you dirty flash and you still don't have fixed rounded corners, please go to Settings, Blissify, More, Rounded corners, and then set statusbar padding to 24 dp. Thanks! For clean flash it should work out of the box.
Next build will fix the unknown maintainer bug in Settings.
The OTA is being uploaded right now so please be patient! Make sure to flash with MD5 as TWRP will detect corrupted downloads with the digest file.
I've gotten a lot of requests for a dreamlte build. I don't own an S8, but a lot of volunteers have volunteered to test, and to that I'm really grateful and would like to say thank you! I noticed that a XDA member ported an unofficial build for the dreamlte already. Despite me contacting the member via PM he (or she) hasn't responded yet. I would like to get an official build out ASAP and would love some help from everybody who owns the S8. If you do and you would like to test an official build, please PM me here on XDA or on Telegram (ID of @ideaman924) so I can invite you to this Telegram group where I will post beta builds before they go live. Then this thread will be moved back into cross-development, once we have an official build out for the S8 that has been tested by everyone.
Again, thanks for using BlissRoms! Any questions? Post them here or send me a message!

[10][UNOFFICIAL] CarbonROM | cr-8.0 [noblelte]

is it for note 5
how to install it
can u make a video of it

smarty_sherief_97 said:
is it for note 5
how to install it
can u make a video of it
Click to expand...
Click to collapse
Yes Is It For Note 5
And Why Dont U Install It And Check It Out

Thank you for this support for the Note 5. I will download this tonight and test it on a Note 5 I got from someone today.

Nice UI. I also like the boot animation and customization. Only thing is that SELinux is set to Permissive. I'm guessing it's quite a big job setting up SELinux policy to function correctly when set to Enforcing in the development of this OS.

zpunout said:
Nice UI. I also like the boot animation and customization. Only thing is that SELinux is set to Permissive. I'm guessing it's quite a big job setting up SELinux policy to function correctly when set to Enforcing in the development of this OS.
Click to expand...
Click to collapse
Are you experiencing overheating? How is the battery life when watching videos?

tesiz22 said:
Are you experiencing overheating? How is the battery life when watching videos?
Click to expand...
Click to collapse
Didn't notice any overheating during the time I had the device. It was on my desk without a cover. It also didn't have a SIM inside but I don't know if that is relevant. Battery life is about the same as stock. Phone was idle for a couple of days without charging and still was 75%. Video playback was fine when using YouTube in Kiwi Browser. I'll ask my friend who now has the phone to let me know if there are any issues.

zpunout said:
Didn't notice any overheating during the time I had the device. It was on my desk without a cover. It also didn't have a SIM inside but I don't know if that is relevant. Battery life is about the same as stock. Phone was idle for a couple of days without charging and still was 75%. Video playback was fine when using YouTube in Kiwi Browser. I'll ask my friend who now has the phone to let me know if there are any issues.
Click to expand...
Click to collapse
Thanks, I was asking because I seem to experience some kind of battery drain when streaming videos. This happens on all the ROMs that I've tried, though I haven't given this one a chance.

"Last Updated 2021-17-13"
Huh?

g000n said:
"Last Updated 2021-17-13"
Huh?
Click to expand...
Click to collapse
Good catch, it's supposed to be 2021-07-13 as they're using ISO 8601.

every galaxy note 5 rom has camera issues and has lag on playing 1080p 60 fps video

queriant said:
every galaxy note 5 rom has camera issues and has lag on playing 1080p 60 fps video
Click to expand...
Click to collapse
are we getting any other rom, like android 12 rom

queriant said:
are we getting any other rom, like android 12 rom
Click to expand...
Click to collapse
Yes
Android 12 and Treble support coming to Galaxy Note 5 / Exynos 7420
This is from Telegram - https://t.me/JoshuaDoesAOSP Discord is here - https://discord.gg/SwWHXgV
forum.xda-developers.com

when is android 12 rom for galaxy note 5

i have installed on SM-N920L not recognize sim card is there any way to fix it

GiangLun3838 said:
i have installed on SM-N920L not recognize sim card is there any way to fix it
Click to expand...
Click to collapse
it might be the apn settings add a new apn

queriant said:
it might be the apn settings add a new apn
Click to expand...
Click to collapse
how do i add apn?

GiangLun3838 said:
how do i add apn?
Click to expand...
Click to collapse
google your sim provider's apn settings i am using vodafone for example

RedSyzer said:
View attachment 5361881
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled ROMs, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best ROM we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub...
What is PAX?
Our release of Android 10, titled CR-8.0, is codenamed PAX after the latin word for peace and Pax, the roman godess for peace.
PAX provides you with the features you need while keeping the focus on delivering an elegant, smooth, and well polished experience. PAX delivers a set of unique features, like a systemwide font engine that also allows for applying fonts on user apps while supporting user fonts through custom APKs generated on fonts.carbonrom.org. We are confident you'll love it, and there's many more things to discover
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! As always, make sure to do backups.
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has addressed it already. Especially if you're even close to new at this.
2) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
3) Join our Discord server or Telegram group! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
Install Instructions:
Other than previously provided ROMs, this is using the "normal" method of providing a flashable zip.
You should start off with the latest OxygenOS on both slots and then proceed to flash Carbon.
You must at least use TWRP 3.4.0-1 by @mauronofrio to flash this.
Download the ROM and optionally GApps, reboot to TWRP.
Flash the ROM
Reboot recovery (to switch between slots)
Flash GApps (optional)
Format /data*
Done
Download
noblelte
Kernel Source
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
pls donate me so i will still google drive storage and give u guys more roms and also for google cloud
PayTM: 9701736528
PhonePe: 9701736528
XDAevDB Information
CarbonROM, ROM for the OnePlus 7T Pro
Contributors
RedSyzer
Source Code: https://github.com/CarbonROM
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Created 2021-07-13
Last Updated 2021-17-13
// thread designed by redsyzer //
Click to expand...
Click to collapse
Hello , very nice rom , just installed it to the Nobleltezt and it works great , so thread can be updated

omg thank you so much, after soft bricking my phone and accidentally erasing my backup, i finally found a rom that still exists

Better Mobile App

welcome