Hello,
my max2 seems dead. :crying:
It does not start any more, during an oment a flashing red led lit when I plugged it on the charger, then nothing, it does not charge, does not start.
an idea ?? at least to retrieve the content
thank you.
How long have you tried charging it? Let it connected for a few hours. If it does not work, try charging it connected to a PC
sebb2297 said:
How long have you tried charging it? Let it connected for a few hours. If it does not work, try charging it connected to a PC
Click to expand...
Click to collapse
i've tried sevreal days ...
i will connect it on my computer
thank's
GUIMIC said:
i've tried sevreal days ...
i will connect it on my computer
thank's
Click to expand...
Click to collapse
install qualcom drivers and flashone tool
connect the phone and press vol+ vol- and power at the same time for few seconds the phone should appear as com(number )
push start button for 25second
darkside57 said:
push start button for 25second
Click to expand...
Click to collapse
tried also.... no response.
GUIMIC said:
tried also.... no response.
Click to expand...
Click to collapse
just try flashone
I had the same issue few days back and it solved in less than half hour
Aimen1 said:
just try flashone
I had the same issue few days back and it solved in less than half hour
Click to expand...
Click to collapse
I try flashone, but impossible to start the phone so impossible to select it in flashone.
thank's
:crying:
sebb2297 said:
How long have you tried charging it? Let it connected for a few hours. If it does not work, try charging it connected to a PC
Click to expand...
Click to collapse
the problem is that the battery is totaly empty, doesnt charge any more so impossible to start any recovery.
may be, i will try to change battery.
thank's
GUIMIC said:
I try flashone, but impossible to start the phone so impossible to select it in flashone.
thank's
:crying:
Click to expand...
Click to collapse
keep the phone on charge for few hours
connect to the computer and press vol-+ and power buttons at the same time
refresh the flashone to detect the device
you must install qualcomm drivers before all that
how you know it battery?!!, it could be the cable, try another cable and try another charger.
hope it works.
AhmadSant said:
how you know it battery?!!, it could be the cable, try another cable and try another charger.
hope it works.
Click to expand...
Click to collapse
thank's,
battery or connector bécause i've tried several cables & charger
Related
Hi!
While doing a nandroid backup restoring my SGS2 went off suddenly.
Now is not responding to power button, not responding to 3 buttons combinations and not responding to usb JIG :crying:
Somebody can help me please??
Rom? Kernel?
How about battery level?
Sent from my GT-I9100 using Tapatalk 2
Low battery or dead battery?
Very much doubt its ROM / Kernel related.
However power/battery may be a problem, have you tried to turn it on with the power plugged into the phone or after allowing it to charge for 5 min? In fact if you plug it it to a wall charger do you get the battery charging icon?
Im suspecting a hardware issue to be honest, if a device switches off like that half way through an innocuous task its either power or a hardware problem.
al_madd said:
Rom? Kernel?
How about battery level?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
When went off it was at 67% of battery.
Now I can't even charge the phone, when I plug the charge into the phone no battery image appears
I was on latest XXLQ5 and wanted to restore nandroid backup of KI8 while this happens.
TheBlueRaja said:
Very much doubt its ROM / Kernel related.
However power/battery may be a problem, have you tried to turn it on with the power plugged into the phone or after allowing it to charge for 5 min? In fact if you plug it it to a wall charger do you get the battery charging icon?
Im suspecting a hardware issue to be honest, if a device switches off like that half way through an innocuous task its either power or a hardware problem.
Click to expand...
Click to collapse
No battery icon when connecting the charger. And can't power on with charger connected
Try leaving it on the charger for 45 mins or 2 hour and try to power on your phone (Remove it from the charger when you try to power it on).
Sent from my GT-I9100 using xda premium
Have you tried taken the battery out for more than 30 seconds?
ephraim033 said:
Try leaving it on the charger for 45 mins or 2 hour and try to power on your phone (Remove it from the charger when you try to power it on).
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I'm trying to charge now...
The screen is warm, but no battery charging icon.
Waza. said:
Have you tried taken the battery out for more than 30 seconds?
Click to expand...
Click to collapse
Yes, I tried to leave battery out for a while (about ten minutes) but nothing...
Have you tried taken the battery out for more than 30 seconds?
Waza. said:
Have you tried taken the battery out for more than 30 seconds?
Click to expand...
Click to collapse
Why ask the same question twice?
I had similar bsod, & following saved me.
1. Launch Odin
2. Plug ph in to PC w/o battery in it.
3. Do 3 button combo for d/l mode.
4. While still holding 3 button combo... now - insert battery (tricky but can be done)
5. If ph goes into d/l mode, flash your stock ROM now with Odin...
Saved my bacon before. Hope it works for you
Sent from Valhalla!
:mwahahaa:
King_Rat said:
I had similar bsod, & following saved me.
1. Launch Odin
2. Plug ph in to PC w/o battery in it.
3. Do 3 button combo for d/l mode.
4. While still holding 3 button combo... now - insert battery (tricky but can be done)
5. If ph goes into d/l mode, flash your stock ROM now with Odin...
Saved my bacon before. Hope it works for you
Sent from Valhalla!
:mwahahaa:
Click to expand...
Click to collapse
Thanks, but tried and nothing happens :crying:
King_Rat said:
I had similar bsod, & following saved me.
1. Launch Odin
2. Plug ph in to PC w/o battery in it.
3. Do 3 button combo for d/l mode.
4. While still holding 3 button combo... now - insert battery (tricky but can be done)
5. If ph goes into d/l mode, flash your stock ROM now with Odin...
Saved my bacon before. Hope it works for you
Sent from Valhalla!
:mwahahaa:
Click to expand...
Click to collapse
I have the same problem now but this didn't fix it. Time to find a JTAG service.
Try this http://forum.xda-developers.com/showthread.php?t=1153310
PS : I have never tries this by myself and don't know if it will works
k0rp0rate said:
Yes, I tried to leave battery out for a while (about ten minutes) but nothing...
Click to expand...
Click to collapse
Try to:
1. Leave the battery.
2. Put the JIG.
3. NOW, while the JIG is on put the battery
I had your same problem and doing this procedure it worked....
PRESS TNX BUTTON IF I HELP YOU :good:
minidou-77 said:
Try this http://forum.xda-developers.com/showthread.php?t=1153310
PS : I have never tries this by myself and don't know if it will works
Click to expand...
Click to collapse
Thanks but that thread is for Samsung Captivate... Better not to try anything for another model.
Tuqano said:
Try to:
1. Leave the battery.
2. Put the JIG.
3. NOW, while the JIG is on put the battery
I had your same problem and doing this procedure it worked....
PRESS TNX BUTTON IF I HELP YOU :good:
Click to expand...
Click to collapse
Already tried but nothing happens :crying:
k0rp0rate said:
Thanks but that thread is for Samsung Captivate... Better not to try anything for another model.
Click to expand...
Click to collapse
No its supposed to work on ALL Samsung devices, read the OP
I found this reading a French blog which is written by a SGS II owner ;-)
Hi
my acro s stop working for some unknow reason. so i turned it off
and try to turn on. but it couldnot turn on. i used the combination of
force to restart keys, and nothing happened. when i plugin the charger,
you can see tiny flashing red light on the LED. anyone knows how to solve
this problem?
thanks
Ummm... Pług it into charger and wait few minutes?
Sent from my ST25i
Antecz said:
Ummm... Pług it into charger and wait few minutes?
Sent from my ST25i
Click to expand...
Click to collapse
i did that for over 6 or 7 hours. do you think it is the battery completely off or it is bricked?
Heh,, so what did you do just before brick? Bad flash? Dropped it? Dog ate it? More info
gazhead said:
Heh,, so what did you do just before brick? Bad flash? Dropped it? Dog ate it? More info
Click to expand...
Click to collapse
i installed a custom rom, and it started losing power gradually even when it is connect to the computer. next day
it was like the condition rite now. you can see the red light, but the phone cannot boot, neither enter fastboot.
Try this: Not sure if it will work...
1) Just connect it to usb cable to pc... Leave it for few hrs..
2) Then open Sony PC Companion and try repair...
I Accidentaly bricked my gf acro s . Ended in bootloop and i did this.. It Worked.
try to charge with dock, it helped for me only acro s if it helped, please, hit thanks
dedgela said:
try to charge with dock, it helped for me only acro s if it helped, please, hit thanks
Click to expand...
Click to collapse
Thanks,
I had a nasty problem, not charging with a new rom and not being able to fastboot etc, only a few seconds in recovery.
i searched my whole house for the acro-s dock, and plugged it in, then also plugged the usb on the phone to a pc usb port, don't know if that added some power, but this gave it enough power to instantly boot & charging... So now I can install a decent rom again.
When I changed the battery on my Z2 it dosen`t start only flashes red 3 times when I press the on button.
Micke46 said:
When I changed the battery on my Z2 it dosen`t start only flashes red 3 times when I press the on button.
Click to expand...
Click to collapse
That indicates that it doesn't have the needed charge to start the phone. You can try connecting it to a different charger with a different cable for a few hours. I think it should turn on. If not, you may have a broken USB (unlikely).
BlAckXpeRia said:
That indicates that it doesn't have the needed charge to start the phone. You can try connecting it to a different charger with a different cable for a few hours. I think it should turn on. If not, you may have a broken USB (unlikely).
Click to expand...
Click to collapse
I have uploaded two batteries with a universal charger so they are fully charged.
Micke46 said:
I have uploaded two batteries with a universal charger so they are fully charged.
Click to expand...
Click to collapse
So you opened the back cover?
BlAckXpeRia said:
So you opened the back cover?
Click to expand...
Click to collapse
Yes.
Micke46 said:
Yes.
Click to expand...
Click to collapse
Have you tried flashing stock ftf?
BlAckXpeRia said:
Have you tried flashing stock ftf?
Click to expand...
Click to collapse
Yes but I will not be in contact with my computer.
Micke46 said:
Yes but I will not be in contact with my computer.
Click to expand...
Click to collapse
When I Remove the battery and keep the volume down and I connect it to computer then it pops up like SOMC Flash Device.
I reflashed to stock rom. After that (succesful boot), it suggest to update to a newer Firmware. I agreed. Then it doesn't awake anymore.
Even long press to power there is no sign of life.
If I plug the power, the white LED goes on for a certain time. I guess it is until it is fully charged.
After this it starts blinking: long, short, long, short .. a few times, than it stops
After pressing the keys, blinking starts again - with no stop until unplugging USB.
Is there any hope to recover it. This time I have not much hope ....
In my moto E, when I connect to charger, the white light blinks for 1 sec, then goes off. No long press, anything is working
starbright_ said:
I reflashed to stock rom. After that (succesful boot), it suggest to update to a newer Firmware. I agreed. Then it doesn't awake anymore.
Even long press to power there is no sign of life.
If I plug the power, the white LED goes on for a certain time. I guess it is until it is fully charged.
After this it starts blinking: long, short, long, short .. a few times, than it stops
After pressing the keys, blinking starts again - with no stop until unplugging USB.
Is there any hope to recover it. This time I have not much hope ....
Click to expand...
Click to collapse
1. Press and hold power button and connect the charger
If white screen appears then go for next step
2. Unplug the charger once and again connect your charger without pressing any button
3. Let your mobile get charged
4. Then flash stock/custom ROM (search in XDA thread)
NOTE : Don't use stock charger(default charger comes with your mobile kit)
USE DIFFERENT CHARGER
Hope it helps you:good:
Rajendran Rasa said:
1. Press and hold power button and connect the charger
If white screen appears then go for next step
2. Unplug the charger once and again connect your charger without pressing any button
3. Let your mobile get charged
4. Then flash stock/custom ROM (search in XDA thread)
NOTE : Don't use stock charger(default charger comes with your mobile kit)
USE DIFFERENT CHARGER
Hope it helps you:good:
Click to expand...
Click to collapse
Used a Samsung Charger, pressed power and plugged in. Nothing happened first. After a while (i guess I released the button) the white LED starts blinking again. And it still blinks.
I haven't seen anything on screen since this update happened ...
Seems to be really screwed.
starbright_ said:
Used a Samsung Charger, pressed power and plugged in. Nothing happened first. After a while (i guess I released the button) the white LED starts blinking again. And it still blinks.
I haven't seen anything on screen since this update happened ...
Seems to be really screwed.
Click to expand...
Click to collapse
Can you go to fastboot mode??
Rajendran Rasa said:
Can you go to fastboot mode??
Click to expand...
Click to collapse
No, Power + Volume down (also tried Volume up) - nothing helped.
The only sign of life is the white LED that seems to indicate charging (if it is on/not blinking).
The second is this strange blinking, I can start with Power + Volume down (but only if USB cable is plugged).
But a "adb usb" reports "no device/emulators found"
starbright_ said:
No, Power + Volume down (also tried Volume up) - nothing helped.
Click to expand...
Click to collapse
Then try this
Connect charger and hold power + volume down
The whit led flashing happens when the battery is deep discharged....Put it on charge for at least 20 minutes ...Then try turning it on ,or going into fastboot mode by disconnecting the charger first
Akshay_92 said:
The whit led flashing happens when the battery is deep discharged....Put it on charge for at least 20 minutes ...Then try turning it on ,or going into fastboot mode by disconnecting the charger first
Click to expand...
Click to collapse
From my experience the White LED goes on (not flashing) if it charges.
It goes off after fully charged. I keep it on charger for many hours.
The LED flashing only happens If I try to go into fastboot while USB is plugged.
starbright_ said:
From my experience the White LED goes on (not flashing) if it charges.
It goes off after fully charged. I keep it on charger for many hours.
The LED flashing only happens If I try to go into fastboot while USB is plugged.
Click to expand...
Click to collapse
You should try to go into fastboot when the phone is fully charged ,rather than when it is being charged ,I have seen it that behaves weirdly when trying to enter into fastboot with the charger being plugged in .
Sent from my Moto G (4) using Tapatalk
Mh, from what I see - if there is no USB plugged, it happens nothing at all. I can preess Power or Power+Volume up/down as long as I like ...
starbright_ said:
Mh, from what I see - if there is no USB plugged, it happens nothing at all. I can preess Power or Power+Volume up/down as long as I like ...
Click to expand...
Click to collapse
A question, which stock ROM version did u flash 4.4.4 or 4.4.2 ?
I was on Lineage, flashed back to stock. Probably to 4.4.2. Than it wants to update to newer stock release, guess 4.4.4 but not sure. Do you think this matters?
starbright_ said:
I was on Lineage, flashed back to stock. Probably to 4.4.2. Than it wants to update to newer stock release, guess 4.4.4 but not sure. Do you think this matters?
Click to expand...
Click to collapse
Yes it matters.
https://forum.xda-developers.com/moto-e/general/warning-downgrading-information-moto-e-t3062859
_sushan_ said:
Yes it matters.
https://forum.xda-developers.com/moto-e/general/warning-downgrading-information-moto-e-t3062859
Click to expand...
Click to collapse
There is nothing mentioned about a solution. I do have a brick :crying:
starbright_ said:
There is nothing mentioned about a solution. I do have a brick :crying:
Click to expand...
Click to collapse
See other threads, u did a mistake by flashing 4.4.2 . You should have flashed 4.4.4 instead. Accepting the OTA, you have hard-bricked your device. It can't be restored as of now. Buy a new device
starbright_ said:
I was on Lineage, flashed back to stock. Probably to 4.4.2. Than it wants to update to newer stock release, guess 4.4.4 but not sure. Do you think this matters?
Click to expand...
Click to collapse
Do you have the v4.4.2 ROM as I just want to check if otg is working or not. As only words are flying around I just need to confirm it.
Ankit_29 said:
Do you have the v4.4.2 ROM as I just want to check if otg is working or not. As only words are flying around I just need to confirm it.
Click to expand...
Click to collapse
As mine one is a brick I deleted all the tested roms and stuff. Sorry.
But as far as I remember OTG doesn't work on Moto E.
starbright_ said:
As mine one is a brick I deleted all the tested roms and stuff. Sorry.
But as far as I remember OTG doesn't work on Moto E.
Click to expand...
Click to collapse
Will verify, no OTG support on stock.
xt830c variant but i doubt that will make any difference lol.
Your device is hard bricked now same as mine. I did the same thing 1 year ago.
I haven't found any solutions yet.
https://forum.xda-developers.com/moto-e/help/solution-hard-bricked-moto-e-t3586395
Let's wait if these guys find some solution.
Btw if anyone have a working Moto E please update the image file on drive and share the link over there.
That will a great help.
Thanks!!
Hello! I think i bricked my xperia x after forgetting to charge my phone. it doesnt turn on even when its charging. whenever it is plugged in the charger the red notification light only blinks every second. any ideas? D:
did u tried connect it to pc ? it show in pc or not ? or maybe ur battery is damaged .
xmmn said:
did u tried connect it to pc ? it show in pc or not ? or maybe ur battery is damaged .
Click to expand...
Click to collapse
The same thing happens if its connected to a pc. D:
Try to charge it for at least 2 hours before trying to turn it on. Also check this try out things as suggested: http://support.sonymobile.com/in/xperiaxdual/faq/I-cannot-power-on-my-device/
Are you good?
helpp
FoxTheLegend said:
Are you good?
Click to expand...
Click to collapse
only blinking red light also happens to me when i plug the chrger, any ssuggestions on how to fix it?
Plug in charger and try pressing (Vol+)+(PowerButton) at the same time for a few seconds