Everytime I finish a run and want to watch it on my iPhone, the picture of the GPS will be in the middle of the ocean.
I've factory reseted the Pace, the iPhone, everything but all my runs are like this. I've recorded my run with my Amazfit Pace and with Nike+ at the same time. The Amazfit app exported the run to Strava automatically after I ended it. The GPS on Amazfit app will record everything fine, when I go see it, it is in the middle of the ocean. The same will happen on the MiFit app.
The exported version that we see on Strava is perfect.
I'm running last update (1.3.7) on iOS 11.4 and App version is 2.3.2
Tapping on the "crossfire" icon doesn't zoom in to your GPS track?
lfom said:
Tapping on the "crossfire" icon doesn't zoom in to your GPS track?
Click to expand...
Click to collapse
No. It will put me in the middle of the ocean again.
Can you export the GPX file an check if it is correct? You can use this site, for instance:
http://www.mygpsfiles.com/app/
Hello, I'd like to ask you how to solve the issue with one missing activity in my android Amazfit app. I have Amazfit Pace watches for 1 month and never had issue with syncing so far. I did running up to 1 hour, cycling up to 2 hours, but on Saturday I had road bike race for 110 km (over 4 hours) and I don't see this activity in my app. I can see it on my watches though, I see everything, including map and gps data. I tried syncing multiple times. I also did short bike activity today, on my way to work, and I can see it on my phone. I also tried to select this activity on my watches and then click "export", it says "exporting, please wait for a while", I left it for 1 hour, nothing happened. So does Amazfit Pace have problem with longer activities? How can I solve this issue, any tips?
Edit: I forgot to mention that I have the latest version of android app and watches as well.
Try AmazeBackup, it exports data from watch directly to TCX/GPX.
Hello,
I have a Pace for one year and very happy with this watch.
I changed my phone last week from an Iphone to a Pocophone. On IOS, the watch was always connected to the phone whatever the Amazfit app is open or close. But on my Pocophone (Android), if the app is open, I get the notification on my watch, but if I close the app, the watch immediatly disconnect.
New on Android, maybe I forgot something ?
Thank your for your help
xavier1971 said:
Hello,
I have a Pace for one year and very happy with this watch.
I changed my phone last week from an Iphone to a Pocophone. On IOS, the watch was always connected to the phone whatever the Amazfit app is open or close. But on my Pocophone (Android), if the app is open, I get the notification on my watch, but if I close the app, the watch immediatly disconnect.
New on Android, maybe I forgot something ?
Thank your for your help
Click to expand...
Click to collapse
Disable Amazfit app from battery optimization settings to allow it to keep running in background. Maybe some other actions may be needed too, and a Xiaomi user could help you more.
Saratoga79 said:
Disable Amazfit app from battery optimization settings to allow it to keep running in background. Maybe some other actions may be needed too, and a Xiaomi user could help you more.
Click to expand...
Click to collapse
Thank you for your reply.
I tried to change the different baterry optimization, but each time, when I closed the application, the watch still disconnected.
Hi there
I've an Amazefit Pace International Version with all updates till today. Already reset the device, unpair and paired again but the problem subsists.
After walking/running no matter the distance, when i close the activity, there is no problem sincyng the data syncs to the app amazefit, but, after when syncing to Strava, the distance that apears is inferior by a large diference from the amazefit app..
Exemple: Running 25Km. When sync to amazefit app the distance its correct but then when sync to strava the distance its shortened to 23K. Its not few meter but Km in some cases..
Does anyone had this problem before?
Strava will always recalculate and smooth the track, so it will never show the same value, specially with bad GPS signal or a lot of noise. If it is important to you, then you can try:
1. Disable auto pause and 3D data in activity settings;
2. Change the activity to "race" once it is imported to Strava.
My stratos have 3D and auto pause off and still apear on Strava such a big difference from amazfit
Sent from my ONEPLUS A3003 using Tapatalk
hugonv said:
My stratos have 3D and auto pause off and still apear on Strava such a big difference from amazfit
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
..
Hi there,
i have the same problem with Pace and last stock rom , i tested climbing and trail running, when sync to strava i have big distance difference. For example 16,13 km on Pace and 14,35 on strava. The 3D data and auto pause off.
Any suggestion? Thanks.
I've seen a few occasions where the end point on Strava is shorter than the end point recorded on my watch.
When this happens I delete the Strava activity, export the GPX track from the watch, then manully upload the GPX to Strava and so far this has fixed the problem.
I had to do this yesterday as the first upload via Amazfit sync was 2 miles short.
The distance on Strava is correct, compared with other gps in same activity. The Pace calculate and show the wrong data. Even uploading on strava the exported gpx file from Pace, i have the same result.
Time is shortened
Hi, I just made a test.
3D and auto stop was OFF.
Auto stop could be good but it is just for fun not normally usable for sport. 3D is interesting but I cant check what it really count. If you want to compare with map or others it is messy. Better to check altitude gain.
RUN TEST:
Watch (Stratos) and APP shows all OK. Distance, pauses, laps. It correspond to the reality.
STRAVA:
- Thinks all stops (not mooving) are pauses! Shortened the run about 40 minutes!
- No manual pauses shown and not possible to see them.
- No laps are shown.
When I switched to RUN/RACE WALK or BIKE, mode on Strava, it then calculate also stops to the time. Better.
- But the manual pauses was calculated also! It does not make a sense. And whats more, it think you made a hyperjump to other place of speed of light! Nice PACE than
In the result is is totally unusable. If you do not use manual pauses, you can can you RUN/RACE mode.
Whats more. If you want to find some place on the map and check time - time when you was there:
- Amazfit APP: not possible to track on the map! Why? You can check on the graph but you dont now where is it.
- Strava: Yes, but only on PC! not in the phone APP, it is nice, but if you have pauses, it is hard to understand.
- GPX export: Over USB and PC it is really not quick method.
Result is, that on the mobile APP you are not able chack position and time on map ever! Thats Amazfit watch.
- GPX export: Over USB and PC it is really not quick method.
1 export gpx on watch
2 amazmod file explorer download (to amazmod folder android)
3 mail to pc
4 manually add activity in strava from file.
Note this only resolves the amazfit App bug that terminates run to strava early (normally when route crosses). FW 2.3.9.0 inability to quickly re-acquire GPS after running under bridges etc will not be fixed.
The difference is easy to spot if the route is correct on the watch then GPX export will resolve.
Disabling 3D worked for me, thx!
the same is the problem with me. what is the solution?
Tapatalkkal küldve az én MIX 2 eszközömről
I had the same problem. For example, I stopped the run at 15km, and pace showed it properly. Then it synced to Strava, the distance was reduced to 12km, with the ending point being 3kms back, way before i actually stopped the activity. I checked altitude data in it just went dead after the 12km, so i guess this is a bug (altitude data goes dead and the watch just stops the activity, even though it still shows you data screen like it's recording). I tried to download gpx from the watch and upload it to Strava manually, which sometimes worked, but sometimes didn't. In some occasions, I also noticed that while amazfit app showed the correct distance, the activity map showed the activity ending flag way before the gps line stopped.
My solution: Power off the watch, wait 10 secs at least then turn it on before each activity. This was the only way for now that reliably worked. I sucpect this is a software issue from the last Pace update, since itnever happened before.
I have the same problem. My Stratos automatically send my Morning Ride with shorter track than I ride (22.5km). After that I export my track to GPX in Stratos device and I have full track of my Morning_Ride (24.7km). It looks, that problem is in synchronization Stratos <> Strava. What is the solution for this problem?
Hi,
I have a pace smartwatch and when i look into the gpx data it's starting after 1km when the watch finally record altitude. So I can't even manually charge the run onto strava with the GPX file. Any idea how to make proper GPS record or to make the altitude work from the first step ?
Maybe it's because I started running right after the GPS tracking was ok but the watch does not tell you the altitude recording is still not possible.
I have Amazfit Stratos 3 since few days and one thing that I noticed today is that Sleep cycles on the watch and in Amazfit app are totally different. Anyone has any idea why? Does the app make some additional calculation with other data or what?
Sleep tracking is utter crap on this watch. Hopefully, Amazmod team can add functionality to pass sensor data to apps like Sleep as Android.
morcio said:
Sleep tracking is utter crap on this watch. Hopefully, Amazmod team can add functionality to pass sensor data to apps like Sleep as Android.
Click to expand...
Click to collapse
Well If it is a crap why at least they don't show the same in app and watch