Related
So, I just received my watch today and I was excited to set it up, but one thing didn't work. The Watch Face Settings inside the Mi Fit app doesn't seem to do anything in the sense that when I try to access it, there is a blue line showing something is loading, but then I am greeted with a blank page.
It need active internet connection to load the watchfaces.
Check your phone Internet connection.
ebeldamasta said:
It need active internet connection to load the watchfaces.
Check your phone Internet connection.
Click to expand...
Click to collapse
I'm connected over Wi-Fi. I should probably try on 4g.
Adrosmart said:
So, I just received my watch today and I was excited to set it up, but one thing didn't work. The Watch Face Settings inside the Mi Fit app doesn't seem to do anything in the sense that when I try to access it, there is a blue line showing something is loading, but then I am greeted with a blank page.
Click to expand...
Click to collapse
I have the same problem
I've been having the same issue since I bought the watch. It's pretty frustrating, since I am not a big fan of the stock watch faces. I've already tried clearing the data of the app and setting up the watch from scratch.
Ni4y said:
I've been having the same issue since I bought the watch. It's pretty frustrating, since I am not a big fan of the stock watch faces. I've already tried clearing the data of the app and setting up the watch from scratch.
Click to expand...
Click to collapse
Did it help? Yesterday I restored my watch and mifit app to factory settings but this did not help
hello , to all
to use Watch Face Settings you can try to use some VPN software to change location to Hong Kong for example...
- sometimes here are problems with connecting to amazfit server from non-china locations((
I tried using HonkKong server using Turbo VPN(android app), doesn't seem to be working. If it works for anyone do let us know
Can't check it now... I have this problem earlier.
Now watch face settings is working (Mifit 3.2.3.1 LolexMod, Bip FW v0.1.0.43)
I try to use Honk kong VPN
And.. The same problem, i cant see watch faces... My version is 3.2.7.2
Same problem. Installed a new watch face through the application notify & fitness for amazfit
Fixed
I managed to fix the error by connecting the Bluetooth clock and being connected, erase the cache and that's it.
I hope it will be helpful.:good:
Stovetoplime said:
I managed to fix the error by connecting the Bluetooth clock and being connected, erase the cache and that's it.
I hope it will be helpful.:good:
Click to expand...
Click to collapse
Just got my bip today and can't see anything on "Watch face settings" page.
Please can you explain your fix in a little more detail please. I tried turning bluetooth on and off, and having wifi on/off but no luck. When you say erase the cache how do I get to that screen? Thanks
I've the same issue. Not yet solved.
Marco1015 said:
I've the same issue. Not yet solved.
Click to expand...
Click to collapse
Seems to be working now, strange
If you login with FB or Google Account please sign out then try to login using Mi Account. That's work for me
riyadibr said:
If you login with FB or Google Account please sign out then try to login using Mi Account. That's work for me
Click to expand...
Click to collapse
1. Unpair Amazfit
2. Sign out Mifit
3. Sign in with Mi Account
4. Pairing Amazfit
5. Done, open Watchface Settings
riyadibr said:
1. Unpair Amazfit
2. Sign out Mifit
3. Sign in with Mi Account
4. Pairing Amazfit
5. Done, open Watchface Settings
Click to expand...
Click to collapse
This doesnt work. It seems something is broken on the page that gives all the list of watch faces. I have another app for custom watch faces which shared a message about something on similar lines.
Solution
I had the same issue, "Local watch faces" is not showing anything, but they seem to be loaded under "Online watch faces". So download a new watch face, for example with "Amazfit Bip & Cor WatchFaces" app, remember the watch face your are substituting. Then go to "Online watch faces", choose the watch face you have substituted (which will still show the original image, not the new watch face!!!) and there you go, your chosen watch face will be loaded to the watch, not the original one.
Quiet confusion really, took me a while to realize this.
Solved blank watch face settings for Amazfit cor
Hello,
I deleted all watch faces downloaded for my amazfit cor. I reinforced to close my Mi app.
I reopened Mi app and reopened Watch Face Settings. It worked again to me.
Hopefully it helps you guys with the same issues as mine.
I'm having a problem with the amazfit bip where if the watch goes out of range the phone's Bluetooth turns off. I'm pretty sure it's the watch and/or app because I uninstalled the app for a whole week and it didn't happen. Does anyone know the fix?
Then it's not the watch but MiFit app, right? What version are you using? Did you try to install an older version? I think APKMirror has older versions available, and it's safe to download apps from.
lfom said:
Then it's not the watch but MiFit app, right? What version are you using? Did you try to install an older version? I think APKMirror has older versions available, and it's safe to download apps from.
Click to expand...
Click to collapse
I'm using the one straight out of the play store. And one had that version up to date. Is the older version better? I had this problem since I got the watch 2 months ago
Hi,
Yes, I confirm, MiFit app toggles the Bluetooth off/on each minute as soon as the Bip Watch goes out of range… Sometimes, the MiFit app is not able to reconnect automatically to the Watch and I'm obliged to stop/start the app and even in the worst cases reboot the smartphone…
This is also a smartphone battery drainer when the Watch is out of range.
No solution found so far… I'm very interested by a fix!
I appreciate the combination of the MiFit app nice interface + "Tools & Amazfit" useful features compared to "Notify & Fitness" or "Gadgetbridge" apps.
But this Bluetooth problem is embarassing.
Hey guys I have a weird problem with my Amazfit Stratos. So everything was working fine last night, but today I discover that I am not getting notifications from my phone (iPhone 6) to the watch. I run the "test notification" option in the app, and they show, but real notification don't... so I restarted the device (the watch) and when it booted up i discover that I don't have the activities and sport screens on the left of the main screen and also the watchface shows only when the watch is "locked" (otherwise it is just.. black). I also see some strange stuff on my last screen (see attachments). The first one opens "sports", the second "Activities" and the last one - "Daily Overview".
Any idea what is going on? It looks like something is not loading properly, but I have no idea what to do. I am using the original firmware.
PS: The good news is that notifications work now.
1. If you are using an APK watchface, probably it's not the right version for your firmware, uninstall and restart watch.
2. Go to Amazfit app settings, widgets and enable/disable one of them, if they do not re-arrange you may need to unpair, logout from Amazfit, login and pair watch again. Unparing erases all data on watch.
I did a factory reset and everything is ok now.
PS: I was using one of the stock watchafaces.
Hi there
I've an Amazefit Pace International Version with all updates till today. Already reset the device, unpair and paired again but the problem subsists.
After walking/running no matter the distance, when i close the activity, there is no problem sincyng the data syncs to the app amazefit, but, after when syncing to Strava, the distance that apears is inferior by a large diference from the amazefit app..
Exemple: Running 25Km. When sync to amazefit app the distance its correct but then when sync to strava the distance its shortened to 23K. Its not few meter but Km in some cases..
Does anyone had this problem before?
Strava will always recalculate and smooth the track, so it will never show the same value, specially with bad GPS signal or a lot of noise. If it is important to you, then you can try:
1. Disable auto pause and 3D data in activity settings;
2. Change the activity to "race" once it is imported to Strava.
My stratos have 3D and auto pause off and still apear on Strava such a big difference from amazfit
Sent from my ONEPLUS A3003 using Tapatalk
hugonv said:
My stratos have 3D and auto pause off and still apear on Strava such a big difference from amazfit
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
..
Hi there,
i have the same problem with Pace and last stock rom , i tested climbing and trail running, when sync to strava i have big distance difference. For example 16,13 km on Pace and 14,35 on strava. The 3D data and auto pause off.
Any suggestion? Thanks.
I've seen a few occasions where the end point on Strava is shorter than the end point recorded on my watch.
When this happens I delete the Strava activity, export the GPX track from the watch, then manully upload the GPX to Strava and so far this has fixed the problem.
I had to do this yesterday as the first upload via Amazfit sync was 2 miles short.
The distance on Strava is correct, compared with other gps in same activity. The Pace calculate and show the wrong data. Even uploading on strava the exported gpx file from Pace, i have the same result.
Time is shortened
Hi, I just made a test.
3D and auto stop was OFF.
Auto stop could be good but it is just for fun not normally usable for sport. 3D is interesting but I cant check what it really count. If you want to compare with map or others it is messy. Better to check altitude gain.
RUN TEST:
Watch (Stratos) and APP shows all OK. Distance, pauses, laps. It correspond to the reality.
STRAVA:
- Thinks all stops (not mooving) are pauses! Shortened the run about 40 minutes!
- No manual pauses shown and not possible to see them.
- No laps are shown.
When I switched to RUN/RACE WALK or BIKE, mode on Strava, it then calculate also stops to the time. Better.
- But the manual pauses was calculated also! It does not make a sense. And whats more, it think you made a hyperjump to other place of speed of light! Nice PACE than
In the result is is totally unusable. If you do not use manual pauses, you can can you RUN/RACE mode.
Whats more. If you want to find some place on the map and check time - time when you was there:
- Amazfit APP: not possible to track on the map! Why? You can check on the graph but you dont now where is it.
- Strava: Yes, but only on PC! not in the phone APP, it is nice, but if you have pauses, it is hard to understand.
- GPX export: Over USB and PC it is really not quick method.
Result is, that on the mobile APP you are not able chack position and time on map ever! Thats Amazfit watch.
- GPX export: Over USB and PC it is really not quick method.
1 export gpx on watch
2 amazmod file explorer download (to amazmod folder android)
3 mail to pc
4 manually add activity in strava from file.
Note this only resolves the amazfit App bug that terminates run to strava early (normally when route crosses). FW 2.3.9.0 inability to quickly re-acquire GPS after running under bridges etc will not be fixed.
The difference is easy to spot if the route is correct on the watch then GPX export will resolve.
Disabling 3D worked for me, thx!
the same is the problem with me. what is the solution?
Tapatalkkal küldve az én MIX 2 eszközömről
I had the same problem. For example, I stopped the run at 15km, and pace showed it properly. Then it synced to Strava, the distance was reduced to 12km, with the ending point being 3kms back, way before i actually stopped the activity. I checked altitude data in it just went dead after the 12km, so i guess this is a bug (altitude data goes dead and the watch just stops the activity, even though it still shows you data screen like it's recording). I tried to download gpx from the watch and upload it to Strava manually, which sometimes worked, but sometimes didn't. In some occasions, I also noticed that while amazfit app showed the correct distance, the activity map showed the activity ending flag way before the gps line stopped.
My solution: Power off the watch, wait 10 secs at least then turn it on before each activity. This was the only way for now that reliably worked. I sucpect this is a software issue from the last Pace update, since itnever happened before.
I have the same problem. My Stratos automatically send my Morning Ride with shorter track than I ride (22.5km). After that I export my track to GPX in Stratos device and I have full track of my Morning_Ride (24.7km). It looks, that problem is in synchronization Stratos <> Strava. What is the solution for this problem?
Hi,
I have a pace smartwatch and when i look into the gpx data it's starting after 1km when the watch finally record altitude. So I can't even manually charge the run onto strava with the GPX file. Any idea how to make proper GPS record or to make the altitude work from the first step ?
Maybe it's because I started running right after the GPS tracking was ok but the watch does not tell you the altitude recording is still not possible.
Hi, I own this watch for 2 weeks now and everything was working fine until the day before yesterday, I opened Amazfit app w/o Internet connection (was not aware at the time, automatic task) so I was kicked out from app and been asked to relogin, cool I did so and then my data been wiped: no steps, no sleep, no HR, weight was all that left (and the only thing that is still working).
So I tried to reboot both watch and phone (Xiaomi Mi6), no luck, also tried to let it be and see the other day, no luck, now it is 3rd day when I am keep seeing no data is going through.
I tried to force manual sync on the watch in Settings that went just fine with successful message after 100%, in the end I unpaired watch (factory reset), still no luck.
Someone told me me to try N&F app and it does read all the data, so how come official app does not, any ideas?
BTW: from time to time Amazfit app shows me that there is not connected devices and when I go to my profile under Amazfit Stratos it shows "Not activated". I activate it every time it says not activated, but it changes nothing about data.
Hello bro, got same problem, Amazfit app stopped syncing activities for few days now. However it's syncings steps properly. Can't work it out, hope someone will help us.
hello, sometimes this happens when there are problems with servers from Xiaomi. That is why there are problems with synchronization and downloading weather data. Usually it lasts from several hours to several days, it is not a continuous problem, There are also problems logging in to the Xiaomi account. I recommend patience and wait a few days.
Wysłane z mojego MI 8 Explorer Edition przy użyciu Tapatalka
I hope so, but when servers are down or something is wrong with them it should not work for everyone and not just one person I believe.
I am worried because I have been using huami bands for years now and nothing like this has happened in the past (in MiFit app).
It's been a week now, is official app really that bad? On day 1, 2 and 3 I was able to force sync watch from it's settings (of course I was getting nothing in app anyway), then I could not even manually sync it to amazfit servers.
All this time I'm also using Notify & Fitness for Amazfit to store my data (which works fine)..
Same here... when synchronization works, then Strava upload doesnt work. Now Strava work, but synchro with app doesnt. xD
Waiting for Xiaomi respond.
Hi, same problem for me on iOS 13.2 with the last amazfit app 3.4.5
all my sleep, step, heart are synchronized, but all my sport activities won't be synchronized.
i just create a ticket to support.
when i try to force "sync data" on different wireless network, i still have "error, verify your network"
after delete/resintall app on my iphone, i loose all my sport activities on iphone, but, i still have it on my watch. (i just backup my watch!)
[email protected] said:
Hi, same problem for me on iOS 13.2 with the last amazfit app 3.4.5
all my sleep, step, heart are synchronized, but all my sport activities won't be synchronized.
i just create a ticket to support.
when i try to force "sync data" on different wireless network, i still have "error, verify your network"
after delete/resintall app on my iphone, i loose all my sport activities on iphone, but, i still have it on my watch. (i just backup my watch!)
Click to expand...
Click to collapse
Same issue for me, on 25th October all activity information on the Amazfit App has stopped being shown. A few days later the same is also true with the step graphics information. I'm running iOS 13.2.2 and the Amazfit App 3.4.5. What is weird is that the information is being sent to Strava and also being held by Apple Health. Just nothing is being shown on the Amazfit iOS App. Sleep, heart rate are all working OK, it is just that I have not record of steps taken over the day when you click on the Walking Man icon (which takes you to the Steps screen) or any activities logged such as running or walking. Up until now I have been very impressed with the Stratos watch and the APP. Does anyone have a recommended fix yet? Watch has the latest firmware installed. Thx
Same issue for me.....
JoeW99 said:
Same issue for me, on 25th October all activity information on the Amazfit App has stopped being shown. A few days later the same is also true with the step graphics information. I'm running iOS 13.2.2 and the Amazfit App 3.4.5. What is weird is that the information is being sent to Strava and also being held by Apple Health. Just nothing is being shown on the Amazfit iOS App. Sleep, heart rate are all working OK, it is just that I have not record of steps taken over the day when you click on the Walking Man icon (which takes you to the Steps screen) or any activities logged such as running or walking. Up until now I have been very impressed with the Stratos watch and the APP. Does anyone have a recommended fix yet? Watch has the latest firmware installed. Thx
Click to expand...
Click to collapse
Hi,
in fact, i resolve my problem alone (thanks amazfit support :mad : )
Before all, i backup all my watch (with AmazeBKP_v1.2)
IMPORTANT, put the watch in airplane if you don't want loosing all your sport activity into the watch.
i'll explain what i do:
1. put the watch in airplane
2. try to see if the watch is connected to amazfit app, normally no, because it is in airplane.
3. if you don"t see the watch, go to amazfit app, and remove the watch from your account.
4. log off from amazfit app
5. Remove the app
6. reinstall the app !
7. logon with your account
8. add the watch ! ... now, for adding a watch to amazfit you need a QR Code... but, if you want a QR Code, you need to reset your watch ! nooooooooooooooooo !!!!!
open a cmd, go in a folder where there are adb (personnally i use adb from amazeBKP), and type: adb shell am start -n com.huami.watch.setupwizard/.InitPairQRActivity
9. the watch QR code appear, you can add it in your amazfit account.
10. force synchronize data from the watch (need wifi)
11. wait a few minute
With this step my amazfit app work again, and i retreive my 179 Sport session ! OUF !!!
For your information if you don't put the watch in airplane first, when you will remove the watch from your account, the watch will be reset automatically and you loose all !!!
Regards
Everything seems to be fixed by Amazfit!!! Activities are now synchronized!!!
Not for everyone, not for me at least.
Nitter78 said:
Everything seems to be fixed by Amazfit!!! Activities are now synchronized!!!
Click to expand...
Click to collapse
From today for me, sync working too.
In my case I cannot sync sport activities without doing a manual upload first. Amazfit app stays at 10% for more than a minute and then the message disappears.
Anyone else had this problem?
BTW, using a Stratos 3 with 4.2.2.1 ROM
theopulus said:
In my case I cannot sync sport activities without doing a manual upload first. Amazfit app stays at 10% for more than a minute and then the message disappears.
Anyone else had this problem?
BTW, using a Stratos 3 with 4.2.2.1 ROM
Click to expand...
Click to collapse
Yes, same problem here.
Tried for few times to unpair/pair, reinstall app, but last activity is from 17.11, although I have 3 more... reported the issue through the app few times and got back thanks from customer service but nothing else happens.
BTW, how do you upload manually? Thanks.
---------- Post added at 10:15 AM ---------- Previous post was at 10:12 AM ----------
intrak said:
From today for me, sync working too.
Click to expand...
Click to collapse
For how long has been it failing? Almost one week for me, don't know what to do or if it will fix automatically after X days...
Getting annoyed.
Thanks.
3 weeks for me and still counting... I have this watch for 4 weeks, so it does not work 90% of the time.
Yesterday after unpair/pair and removing the app worked for a while and workout form yesterday was sync ok, but today again nothing happens...
Yes only manual sync is working(using WiFi)
Go in sync menu from watch then manual sync.
Only with this I have my workout.
Don't know if the pb is from the watch or app
winni21 said:
Yes only manual sync is working(using WiFi)
Go in sync menu from watch then manual sync.
Only with this I have my workout.
Don't know if the pb is from the watch or app
Click to expand...
Click to collapse
The bad news is Ultra Mode doesn't have manual sync, so if you use it and there is a workout not syncing, you lose it.
theopulus said:
The bad news is Ultra Mode doesn't have manual sync, so if you use it and there is a workout not syncing, you lose it.
Click to expand...
Click to collapse
The workout you're doing in ultra mode are not visible in normal mode?