[Solved] successful instal twrp but can't boot into it - Galaxy S6 Edge Q&A, Help & Troubleshooting

Hi,
I'm using S6e G925T Nougat.
I've flashing latest twrp-3.2.3.0-zeroltmo.img.tar via odin 3.12.7 and got succeeded.
But when i try to boot into twrp by pressing vol up+home+power it turning to stock recovery.
I've trying with different version of twrp & odin but still.
Is anyone know why and know how to make it boot to twrp?
Please help.
Thank you.

Fariezgie said:
Hi,
I'm using S6e G925T Nougat.
I've flashing latest twrp-3.2.3.0-zeroltmo.img.tar via odin 3.12.7 and got succeeded.
But when i try to boot into twrp by pressing vol up+home+power it turning to stock recovery.
I've trying with different version of twrp & odin but still.
Is anyone know why and know how to make it boot to twrp?
Please help.
Thank you.
Click to expand...
Click to collapse
disable auto reboot in odin..
and after flash is successful, remove cable then hold power & vol- button.. when screen goes off, release ur fingers and quickly hold home & power & vol+ buttons to get into twrp recovery.. u must be quick
good luck

Thank u, it solved mine

zinou111 said:
disable auto reboot in odin..
and after flash is successful, remove cable then hold power & vol- button.. when screen goes off, release ur fingers and quickly hold home & power & vol+ buttons to get into twrp recovery.. u must be quick
good luck
Click to expand...
Click to collapse
Hi, thanks for the thread. I've been able to enter TWRP. But, after I reboot into the system. I'm having a bootloop, then I can still get into Odin mode and repeat this step. But, when flashing TWRP. Either I'm too quick to turn off my phone. Downloading is at 99%. What can I do to fix this? Then whether to install TWRP when it will reboot to the system? Thanks.

Related

[GUIDE] How to Enter ODIN and Recovery Modes on Verizon Galaxy S4

Not sure if this is the proper section for this but thought I would post this here as I'm sure it would highly assist people in development and other tasks. This is the button combinations you need to enter each mode.
ODIN/Download Mode
Make sure your device is completely off
Key(s): Volume Down
While holding this key down simultaneously press the Power button until you see a disclaimer on the screen
Then let go of both buttons and press Volume Up to accept the disclaimer
Once the green robot is visible on the screen this indicates that handset is in now ODIN/Download mode
Recovery Mode
Make sure your device is completely off
Key(s): Volume Up
While holding this key down simultaneously press the Power button
As soon as the phone vibrates, let go of the Power button but keep holding Volume Up
When you see the "Samsung Galaxy S4" logo (not just the word "Samsung"), right after that, the next screen you should see is your recovery
Don't let go of Volume Up until you see your recovery
It's not necessary to hold the Home button to boot into Odin mode, the combination for recovery is correct though.
So just power/volume down for Odin and home/volume up/power for recovery
mikebuck69 said:
It's not necessary to hold the Home button to boot into Odin mode, the combination for recovery is correct though.
So just power/volume down for Odin and home/volume up/power for recovery
Click to expand...
Click to collapse
Sorry about that, small typo on copy/paste. Has been fixed.
Thanks!
No download mode
I've been trying to get into download mode for days and can't seem to figure it out. I have the Verizon g s4 sch-i545. I've done all of the key combos and even tried some combos + plugging in the USB cable. Nothing is working for me. Any help would be nice. Thanks
I have no problem getting into recovery mode....
mikebuck69 said:
It's not necessary to hold the Home button to boot into Odin mode, the combination for recovery is correct though.
So just power/volume down for Odin and home/volume up/power for recovery
Click to expand...
Click to collapse
Home isn't necessary for recovery either. I just hold power and volume up, when the phone vibrates I let go of power and continue to hold volume up until I see the booting recovery message in the upper left.
So nothing? Nobody can offer some advice?
Moto not working
So I'm having no success with this. I went through all the steps including flashing the pre-release tar ball (MD2). All this went without fail, however once I launched Motochop and pressed enter to root. I get line Daemon not on. run port 5873. Daemon connected or on and then thats it. I don't get a notification at any point prior to me pressing enter or afterwords that I need to accept. It just stops and I get "you should reboot" from the notification bar. Have I done something wrong? I went through all the prior steps several times and I keep getting this error message.
SonicJoe said:
Home isn't necessary for recovery either. I just hold power and volume up, when the phone vibrates I let go of power and continue to hold volume up until I see the booting recovery message in the upper left.
Click to expand...
Click to collapse
Agreed. Volume up and power for recovery. Volume down and power for odin.
Sent from my SCH-I545 using Tapatalk 4 Beta
Nice summary. Im getting my S4 any day now.
Sent from my Nexus 7 using Tapatalk 2
Well I have pushed volume down and power over and over and my phone will not enter odin.
thanks you !
Bdubois100 said:
Well I have pushed volume down and power over and over and my phone will not enter odin.
Click to expand...
Click to collapse
Don't just push them. You need to hold both until you feel the phone vibrate. Then you can let go of the power button, but keep holding volume down until download mode starts.
SonicJoe said:
Don't just push them. You need to hold both until you feel the phone vibrate. Then you can let go of the power button, but keep holding volume down until download mode starts.
Click to expand...
Click to collapse
When someone offers a debloat script that's in a Zip file and says "flash it to your device" do you think they mean flash it in Odin mode or flash using TWRP??
onearmsysiphus said:
When someone offers a debloat script that's in a Zip file and says "flash it to your device" do you think they mean flash it in Odin mode or flash using TWRP??
Click to expand...
Click to collapse
Flash it in recovery
Thanks SonicJoe. Starting to figure *some of this stuff out haha.
Issue
alrigth i got it to work. is there any way to move cwm backups to the sd card?
Odin Error
I am having one heck of a time flashing to the GS4 with Odin. I follow all of the steps to a "t" but cannot get the custom kernal onto the device. I'm having no problem getting to download mode and all the setting look to be correct, however when I start the Odin process I end up with a "fail" every time. I have been looking around the web for a few days for an answer, but so far this looks like the best thread to get help.
Make sure the kernel you are trying to flash is compatible with the Odin method. A lot of kernels can be flashed via custom recovery. The first thing I would do is uninstall and then reinstall the Samsung drivers. Make sure you have the latest and it is compatible with your computer OS. You would be surprised how often drivers can screw up Odin.
Sent from my SCH-I545 using xda app-developers app
my s4 is getting into download mode itself..
i got my s4 i9500 frm bangkok but now not accepting the network ...so tried to get in download mode n root it n then 2 chg the rom n try but its not getting into download mode itself wen i use (vol down+power+main btn) ... but its going in recovery mode alone wat can b done to dis??? can any one pls help it out>????

Stuck at start-up, need help!

Hi!
Last night, I installed a new custom-firmware by using Baidu ROM flash tool (not exactly the Baidu ROM). After installation, my phone rebooted, and got stuck on "Baidu" logo (a screen before the user-interface).
Is there any way to flash another rom, or do some reset?
Thank you!
Probably you should have done a factory reset on your phone before flashing Baidu. You can do this through CWM, and after this you can flash Baidu rom.
Also, you can always flash stock roms with Odin.
freitaz said:
Probably you should have done a factory reset on your phone before flashing Baidu. You can do this through CWM, and after this you can flash Baidu rom.
Also, you can always flash stock roms with Odin.
Click to expand...
Click to collapse
But how do I install CWM on my phone. It's not even rebooting in the recovery mode by pressing VOL+, MENU, and Power button.
noman.rasheed said:
But how do I install CWM on my phone. It's not even rebooting in the recovery mode by pressing VOL+, MENU, and Power button.
Click to expand...
Click to collapse
Put your device on download mode (VOL -, menu, power buttons) and then flash CWM with Odin.
freitaz said:
Put your device on download mode (VOL -, menu, power buttons) and then flash CWM with Odin.
Click to expand...
Click to collapse
No! Not working for me. Is there any other way?
This is what it happens;
Samsung Logo - Samsung Galaxy Win GT-I8552 (appears on screen), and then Baidu Logo ; that's all!
Are you doing the process right? You must press the three buttons at same time; when your phone vibrates, you release only the power button but keep the other two pressed. A warning should appear on screen.

My phone has been bricked

Please help. My s3 can only boot into twrp logo and stays there while flickering every few seconds. I have tried the volume up, power button and home button thing and still it does nothing but reboot to the same place. In short, I cannot enter recovery mode to re-flash my phone.
What about download mode? Volume down Power and Home button?
savor_savvy said:
Please help. My s3 can only boot into twrp logo and stays there while flickering every few seconds. I have tried the volume up, power button and home button thing and still it does nothing but reboot to the same place. In short, I cannot enter recovery mode to re-flash my phone.
Click to expand...
Click to collapse
What about entering download mode ? As it was stated above ? Then you can download last stock firmware for your region and flash it via Odin. Good source of original firmware is //samsung-updates.com/. Odin is available at many sites. If you run Win7 (or higher) on your PC you do not need any additional software, if not - proper drivers to see your mobile will be required. Then, if you do not want to stay with stock ROM, you can flash custom recovery and finally custom ROM chosen from dozens of them...

G925FXXU3COI9 Root

Is there a possible way to root the g925fxxu3coi9 5.11 S6 Edge? I've heard some guys tried to and got stuck at the bootscreen. And if it is possible, could somebody please reffer me to a guide on how to do it safely? Thank you.
Hey rsnail_valy! I guess you are looking for this thread. I haven't rooted my one yet though TWRP Recovery 2.8.7.1 and Root for G925F Android 5.1.1 (unofficial)
Yeah I saw that thread but it's not really explicit at all, I can't really understand what I have to do reading what it says there, maybe someone could explain...
Hi, Yesterday i root my 925F through this method Just do it bro download all three files. TWRP, Kernel and Super User..
Copy Kernel and Super User file to your phone..
then power off and go in to recovery(Holding Vol Down + Home + Power) ...Flash TWRP through ODIN(Uncheck Auto Reboot in options) After Flashing Holding Vol down and Power to turn off mobile.
After that Go to recovery by Holding Vol up+ Home + Power .
You now in recovery Now Flash Kernel and Super User then you are Ready to go
moizhaque said:
Hi, Yesterday i root my 925F through this method Just do it bro download all three files. TWRP, Kernel and Super User..
Copy Kernel and Super User file to your phone..
then power off and go in to recovery(Holding Vol Down + Home + Power) ...Flash TWRP through ODIN(Uncheck Auto Reboot in options) After Flashing Holding Vol down and Power to turn off mobile.
After that Go to recovery by Holding Vol up+ Home + Power .
You now in recovery Now Flash Kernel and Super User then you are Ready to go
Click to expand...
Click to collapse
]
Umm ... I'm in the same issue as the OP. How do you flash Kernel and SuperUser with TWRP ? You just flash them with ODIN while you are in the Recovery tab, or how ? Please explain, because I tried once to root my COI9 and I got stucked in the bootloop and I just don't want to repeat this again.
After I flash TWRP with Odin then I proceed to flashing Kernel and SuperSU (which I previously copied on my phone) with TWRP from the recovery menu shown on my phone's screen? And also, after this rooting method am I going to be able to use fingerprint scanner on the lock screen? I heard some guys lost this feature of the phone after rooting, is this true?

Samsung GTI9300 Stuck on Boot Screen

Hi Guys,
I have tried several steps here on flashing stock firmware using Odin but no hope. It doesnt detect the device in odin. I dont know what to do now. Please Help. Attached is the recovery screen that i am getting when holding the power+vol up+home button.
Thanks for the help in advance guys!
Same problem here.
Reboot the device and hold 'Vol down , HOME and Power
When you are in the download menu press vol + to continu and ODIN will see your phone
JWK8110 said:
Same problem here.
Reboot the device and hold 'Vol down , HOME and Power
When you are in the download menu press vol + to continu and ODIN will see your phone
Click to expand...
Click to collapse
but mine doesnt detect by Odin. nothing happens at all. im stuck and dont know what to do.

Categories

Resources