Hi there,
Now that Magisk won't install on ALP-L29 8.0.0.138 C636patch01 (july 1st security patch), is there a way to root with this firmware and especially this security patch?
Regards,
Does anyone know how to root this firmware version? Been scouring the web all week with no information
You should be able to downgrade to B138 using eRecovery, this would remove Patch01.
ante0 said:
You should be able to downgrade to B138 using eRecovery, this would remove Patch01.
Click to expand...
Click to collapse
this need unlocked bootloader too? because i tried but faild to get package.
hamadazh said:
this need unlocked bootloader too? because i tried but faild to get package.
Click to expand...
Click to collapse
No, unlock is not needed for eRecovery.
However, if you rebranded eRecovery will usually fail to get package.
ante0 said:
No, unlock is not needed for eRecovery.
However, if you rebranded eRecovery will usually fail to get package.
Click to expand...
Click to collapse
yes it's debranded it was ALP-AL00 and now ALP-L29.
fastboot can flash stock RAMDISK without unlocked bootliader?
hamadazh said:
yes it's debranded it was ALP-AL00 and now ALP-L29.
fastboot can flash stock RAMDISK without unlocked bootliader?
Click to expand...
Click to collapse
No way to do it.
Only way you could try is dload to B138, BUT I'm not certain what happens if you're now on 02 xloader.
ante0 said:
No way to do it.
Only way you could try is dload to B138, BUT I'm not certain what happens if you're now on 02 xloader.
Click to expand...
Click to collapse
but i read in some places and someone confirm 8.0.0.138 01patch is 01xloader, but i think or maybe the problem is from the newer security patch 1 july 2018. Funky huwaei support team told me that they can't read bootloader or rebrand also said erecovery will not working after debrand since 01 july newer security patch.
the problem too is i went to teammt.ru site for downloading 8.0.0.138 full rom but it's not available to download. maybe FF working not tried, but anyway i think i have to live with this, until huawei open unlock bootloader service again.
How to root in Patch01 update : https://forum.xda-developers.com/showpost.php?p=77560239&postcount=27389
does anyone have a ramdisk of alp 29 ?
Related
I have two Mate 10s, one is the ALP-AL00 and the other is the ALP-L29CC636. Firmware Finder shows that updates are available for both of these devices but when I select to download them the System update says 'No updates'. How do I update them?
okizen said:
I have two Mate 10s, one is the ALP-AL00 and the other is the ALP-L29CC636. Firmware Finder shows that updates are available for both of these devices but when I select to download them the System update says 'No updates'. How do I update them?
Click to expand...
Click to collapse
As of June Huawei started using https so FF can't send it to System Update. You would have to use HWOTA or TWRP with HuRUpdater.
Thanks ante0
Does that mean I should wait for the official updates from Huawei instead? And does using HWOTA require root?
okizen said:
Thanks ante0
Does that mean I should wait for the official updates from Huawei instead? And does using HWOTA require root?
Click to expand...
Click to collapse
HWOTA requires unlocked bootloader, same as TWRP.
You could wait, AL usually get updates fast
And FW shown on FF can be beta and test too, so just because a new fw appeared doesn't mean it will be pushed to devices eventually.
ante0 said:
HWOTA requires unlocked bootloader, same as TWRP.
You could wait, AL usually get updates fast
And FW shown on FF can be beta and test too, so just because a new fw appeared doesn't mean it will be pushed to devices eventually.
Click to expand...
Click to collapse
Ok, I think I'll wait a little while longer.
Thanks again ante0.
ante0 said:
HWOTA requires unlocked bootloader, same as TWRP.
You could wait, AL usually get updates fast
And FW shown on FF can be beta and test too, so just because a new fw appeared doesn't mean it will be pushed to devices eventually.
Click to expand...
Click to collapse
The ALP-L29 8.0.0.138(C636) is actually approved for installation according to FF. So it shouldn't be to long...
mscion said:
The ALP-L29 8.0.0.138(C636) is actually approved for installation according to FF. So it shouldn't be to long...
Click to expand...
Click to collapse
Thanks mscion.
Hello guys. I want to know how i can receive the bootloader code to debrand my huawei mate 10 pro. Unfortunatly wind don't release updates from june so i haven't the night mode camera and gpu turbo.
Build BLA-L09 8.0.0.132(c781)
basty95 said:
Hello guys. I want to know how i can receive the bootloader code to debrand my huawei mate 10 pro. Unfortunatly wind don't release updates from june so i haven't the night mode camera and gpu turbo.
Build BLA-L09 8.0.0.132(c781)
Click to expand...
Click to collapse
Possibly with HCU-client. Depends on if your firmware is patched or not.
Only way to find out is to use HCU... It cost $4 for bootloader code.
basty95 said:
Hello guys. I want to know how i can receive the bootloader code to debrand my huawei mate 10 pro. Unfortunatly wind don't release updates from june so i haven't the night mode camera and gpu turbo.
Build BLA-L09 8.0.0.132(c781)
Click to expand...
Click to collapse
I'm on the same build .132(c782)
1st of June security patch
Was able to unlock bootloader via DC-Unlocker, cost 4 Euro's
Really? You use it for bootloader code?
basty95 said:
Really? You use it for bootloader code?
Click to expand...
Click to collapse
Yes
I did it too but the program gives me a error message 375 and DC refunds me
steelmaggot said:
I'm on the same build .132(c782)
1st of June security patch
Was able to unlock bootloader via DC-Unlocker, cost 4 Euro's
Click to expand...
Click to collapse
i'm on c432 and am told it wouldn't work so i am returning it for a brand new one, but you seem to be on a newer version so how did that work?
zzcool said:
i'm on c432 and am told it wouldn't work so i am returning it for a brand new one, but you seem to be on a newer version so how did that work?
Click to expand...
Click to collapse
DC-unlocker works if you're on BLA-xxx C432 B142 or lower
i'm on 8.0.0.132(C782) C782 is a different region code
all mate 10 pro's purchased unlocked from carphone warehouse in the uk have this region code
the main region code for unlocked phones in europe is c432(as far as i can tell)
zzcool said:
i'm on c432 and am told it wouldn't work so i am returning it for a brand new one, but you seem to be on a newer version so how did that work?
Click to expand...
Click to collapse
HCU/DC says it doesn't work any firmware on Oreo, but I can confirm it is working on B142.
ante0 said:
HCU/DC says it doesn't work any firmware on Oreo, but I can confirm it is working on B142.
Click to expand...
Click to collapse
But why for my firmware version doesn't work?
basty95 said:
But why for my firmware version doesn't work?
Click to expand...
Click to collapse
Are you using HCU-client?
DC-unlocker doesn't work afaik. HCU-client is made by DC.
When firmware is patched HCU just says Unsupported model/chip
ante0 said:
HCU/DC says it doesn't work any firmware on Oreo, but I can confirm it is working on B142.
Click to expand...
Click to collapse
so can you give me a clear answer if i buy a huawei mate 10 pro again and don't upgrade anything and just flash it instantly will it work?
zzcool said:
so can you give me a clear answer if i buy a huawei mate 10 pro again and don't upgrade anything and just flash it instantly will it work?
Click to expand...
Click to collapse
If it's on B142 yes, if B145 you can downgrade to B142. If B146+ you can't do anything because of updated bootloader that prevents downgrade to B145 or lower.
This assumes the shop hasn't updated it of course.
ante0 said:
If it's on B142 yes, if B145 you can downgrade to B142. If B146+ you can't do anything because of updated bootloader that prevents downgrade to B145 or lower.
This assumes the shop hasn't updated it of course.
Click to expand...
Click to collapse
it's komplett, and the phone is completely sealed.
zzcool said:
it's komplett, and the phone is completely sealed.
Click to expand...
Click to collapse
It should be fine then, mine came with B115, though I got it right after it released.
ante0 said:
If it's on B142 yes, if B145 you can downgrade to B142. If B146+ you can't do anything because of updated bootloader that prevents downgrade to B145 or lower.
This assumes the shop hasn't updated it of course.
Click to expand...
Click to collapse
So i can downgrade my firmware? If yes i can maybe see tho bootloader code and flash a no brand firmware
basty95 said:
So i can downgrade my firmware? If yes i can maybe see tho bootloader code and flash a no brand firmware
Click to expand...
Click to collapse
That I don't know. You can see if you find your firmware on androidhost.ru as that's where you find DLOAD firmware.
My reply was to zzcool.
hi guys I have the unlock code, someone could tell me how to do the phone debrand? thank you
@Pretoriano80 @ante0
I did the rebrand of my Mate ALP-L29C636 for the L00C00 version. Due to some problems I had with the Chinese ROM I want to do the debrand. The bootloader is unlocked and I have the original oeminfo file. As I am in the latest version of EMUI 8.1 (xloader 02), do you think it is possible to do debrand using HWOTA? I appreciate if you can help me.
---------- Post added at 04:47 PM ---------- Previous post was at 04:46 PM ----------
I've got an unbranded L29C432 mate pro but been stuck at the .161 firmware for ages, tried using HiCare but can't seem to find new firmware.
Can I do a manual update? (dload method?) and which firmware should I download? Too bad FF doesn't work anymore :crying:
Same here. No OTA,no hicare and stuck on November security patch.
SnowOokami said:
I've got an unbranded L29C432 mate pro but been stuck at the .161 firmware for ages, tried using HiCare but can't seem to find new firmware.
Can I do a manual update? (dload method?) and which firmware should I download? Too bad FF doesn't work anymore :crying:
Click to expand...
Click to collapse
You can flash Service ROM 9.0.0.243 from dload
https://androidhost.ru/Uqk
Instructions for installing can be found in folder "ReleaseDoc" .
bozka1 said:
You can flash Service ROM 9.0.0.243 from dload
https://androidhost.ru/Uqk
Instructions for installing can be found in folder "ReleaseDoc" .
Click to expand...
Click to collapse
going to try that!
SnowOokami said:
going to try that!
Click to expand...
Click to collapse
Warning: this process will erase all the data from your device!!!
Hi, i have a mate 20 pro model c212 (at&t mexico), i want to install a new firmware for example c62 or c432, i can? or not? Pleas help me!
You could update main base easily, but that could screw the futur C212 stock OTA Updates if the new base version number you re flashing is not or won t be an official C212 base version number.
What is the matter with your LYA C212 ?
-still on emui9.0 and you want emui9.1 ?
-security patches date too old on latest C212 ?
oslo83 said:
You could update main base easily, but that could screw the futur C212 stock OTA Updates if the new base version number you re flashing is not or won t be an official C212 base version number.
What is the matter with your LYA C212 ?
-still on emui9.0 and you want emui9.1 ?
-security patches date too old on latest C212 ?
Click to expand...
Click to collapse
I am currently in version 9.1.320 of att mexico (212), but the Telcel version (C69) is updated faster, what I fear is that EMUI 10 does not arrive because of the att issue
Ok.
So no, there is no way to rebrand your M20P with a locked bootloader.
oslo83 said:
Ok.
So no, there is no way to rebrand your M20P with a locked bootloader.
Click to expand...
Click to collapse
And you know how to install an update if my operator does not?
You could use a service firmware to change cust, preload and base to a different region. I did this back and forth from C432 to C636 when I saw fit using the dload method.
Shaolin36 said:
You could use a service firmware to change cust, preload and base to a different region. I did this back and forth from C432 to C636 when I saw fit using the dload method.
Click to expand...
Click to collapse
dload will just skip the out-of-region cust and preload files ; only base will be applyed.
oslo83 said:
dload will just skip the out-of-region cust and preload files ; only base will be applyed.
Click to expand...
Click to collapse
Hm, when I used FH a while back it switched me to C636 - and every OTA I received was C636 - I couldn't return to C432 via any method until I tried dload and it worked for me. It may be because my device is natively C432.
I still don t understand how these previous FH updates managed to softrebrand just fine kirin980 devices.
Your build number once rebranded, in about phones, was then C636ExRyPz or you were missing the RyPz part?
oslo83 said:
I still don t understand how these previous FH updates managed to softrebrand just fine kirin980 devices.
Your build number once rebranded, in about phones, was then C636ExRyPz or you were missing the RyPz part?
Click to expand...
Click to collapse
Included RP section, so it successfully rebranded, and then I managed to move back to C432 using dload.
Shaolin36 said:
Included RP section, so it successfully rebranded, and then I managed to move back to C432 using dload.
Click to expand...
Click to collapse
Is it currently possible to do? For the bootloader issue, can you show me the guide you followed to flash?
Prounder15 said:
Is it currently possible to do? For the bootloader issue, can you show me the guide you followed to flash?
Click to expand...
Click to collapse
There will be guides around on our device forum. But basically requirements:
USB Stick (formatted exFAT)
USB OTG
You will need to download the service firmware, for this I used androidhost ru and firmware 9.1.0.300 C432.
You will have 3 zip files inside the firmware, you must create a folder on the USB stick called 'dload' and inside this folder you put the three zip files (named like update_sd_base.zip etc). Plug USB stick into device with OTG adapter and then open dialer and type *#*#2846579#*#* and choose software upgrade then memory card upgrade. Should restart and upgrade device to your new firmware (don't unplug USB during this process and make sure you have above 30% battery)
I though he was speaking about how to softrebrand with FunkyHuawei...
oslo83 said:
I though he was speaking about how to softrebrand with FunkyHuawei...
Click to expand...
Click to collapse
Well if he was speaking about that then there's no guidance I can provide him. It's a paid service and doesn't really require a 'guide' as it's simple. He can check out their website, but regardless - if he wishes to try the dload method then there's there guide.
Shaolin36 said:
There will be guides around on our device forum. But basically requirements:
USB Stick (formatted exFAT)
USB OTG
You will need to download the service firmware, for this I used androidhost ru and firmware 9.1.0.300 C432.
You will have 3 zip files inside the firmware, you must create a folder on the USB stick called 'dload' and inside this folder you put the three zip files (named like update_sd_base.zip etc). Plug USB stick into device with OTG adapter and then open dialer and type *#*#2846579#*#* and choose software upgrade then memory card upgrade. Should restart and upgrade device to your new firmware (don't unplug USB during this process and make sure you have above 30% battery)
Click to expand...
Click to collapse
Thank you very much brother for the guide, I will try with your guide and I will see what happens, only 1 more thing, the firmware I only found on the essy-firmware page but it is paid, do you know where I can download it for free?
Prounder15 said:
Thank you very much brother for the guide, I will try with your guide and I will see what happens, only 1 more thing, the firmware I only found on the essy-firmware page but it is paid, do you know where I can download it for free?
Click to expand...
Click to collapse
Search on androidhost.ru
Shaolin36 said:
Search on androidhost.ru
Click to expand...
Click to collapse
My model is LYA-09 is there any problem if I install some firmware for the LYA-L29?
In My model i only found:
Huawei Mate 20 Pro LYA-L09 hw eu Laya-L09C 9.0.0.266(C432E10R1P16) Firmware 9.0.0 r3 EMUI9.0.0 05015LBD [androidhost.ru].zip
In LYA-L29:
Huawei Mate 20 Pro LYA-L29 hw eu Laya-L29C 9.1.0.310(C432E10R1P16).DLOAD.zip
Shaolin36 said:
Included RP section, so it successfully rebranded, and then I managed to move back to C432 using dload.
Click to expand...
Click to collapse
So just to clarify, you're saying that you can rebrand a Huawei devices Cust code from example a C432 to C185 without bootloader being unlocked?
Sent from my EVR-L29 using Tapatalk
I'm in the same predicament. Previous owner flashed the firmware from C792 (Canada) to C636 (Asia) via FunkyHuawei. And now I'm not getting any OTA updates and stuck on 9.0.0265. I would like to re-flash my fw back to c792 and I have the bootloader unlock code for my device, but I'm unable to find any guides to help me achieve this. Will the guide you provided work for me as well?
Limeybastard said:
So just to clarify, you're saying that you can rebrand a Huawei devices Cust code from example a C432 to C185 without bootloader being unlocked?
Sent from my EVR-L29 using Tapatalk
Click to expand...
Click to collapse
Deevusone said:
I'm in the same predicament. Previous owner flashed the firmware from C792 (Canada) to C636 (Asia) via FunkyHuawei. And now I'm not getting any OTA updates and stuck on 9.0.0265. I would like to re-flash my fw back to c792 and I have the bootloader unlock code for my device, but I'm unable to find any guides to help me achieve this. Will the guide you provided work for me as well?
Click to expand...
Click to collapse
Yes, it should work. I'd be happy to help you if you add me on Telegram. @Shaolin36
How can I update a Huawei P20 Lite (ANE-LX2) with 8.0.0.120 to any version of Android 10? Or, at least, 9.1 official. When trying to update officially with system menu it does not offer me any update. I have bootloader unlocked and is rooted, but apparently the Android 9-10 ROMs require EMUI 9 and I have EMUI 8. What can I do? I've been exploring forums for hours and I can't find something clear. I need to update EMUI version and Android version separately?
Toranks said:
How can I update a Huawei P20 Lite (ANE-LX3) with 8.0.0.120 to any version of Android 10? Or, at least, 9.1 official. When trying to update officially with system menu it does not offer me any update. I have bootloader unlocked and is rooted, but apparently the Android 9-10 ROMs require EMUI 9 and I have EMUI 8. What can I do? I've been exploring forums for hours and I can't find something clear. I need to update EMUI version and Android version separately?
Click to expand...
Click to collapse
What is exactly your build number? (Settings > About phone )
-Alf- said:
What is exactly your build number? (Settings > About phone )
Click to expand...
Click to collapse
ANE-LX2 8.0.0.120(C636)
Toranks said:
ANE-LX2 8.0.0.120(C636)
Click to expand...
Click to collapse
Unfortunately, there's no EMUI 9.1 Service ROM on androidhost.ru for region C636.
Try to update via HiSuite or via eRecovery .
(make sure to have the stock recovery flash)
I don't mind changing the region. In fact, I would prefer change it to EU. I can?
Hisuite and erecovery doesn't offer updates
Toranks said:
I don't mind changing the region
Click to expand...
Click to collapse
me neither
Toranks said:
ANE-LX2 8.0.0.120(C636)
Click to expand...
Click to collapse
Toranks said:
In fact, I would prefer change it to EU. I can?
Click to expand...
Click to collapse
Yes, you can.
Toranks said:
Hisuite and erecovery doesn't offer updates
Click to expand...
Click to collapse
And what about HiCare ?
Now I am on 9.1 with an official european OTA, have changed region from spceas to eu with dc-unlocker (this cost to me 2 credits), and with root. It took me a long time to get it, so I'm scared to upgrade to android 10 and lost my root. Any suggestion?
Toranks said:
I'm scared to upgrade to android 10 and lost my root. Any suggestion?
Click to expand...
Click to collapse
It depends on:
1. the type of root
2. whether you have Bootloader unlock code (it is not recommended to play with custom ROMs without BL unlock code).
In any case, you can install the following types of custom ROMs:
A) xxxxx-arm64-bgS(or bvS) with built-in SU (sometimes with SuperUser) ,then you need only install phh-superuser.apk to get root permissions
B) xxxxx-arm64-bgZ/bvZ with built-in enhanced dynamic root (you can enable/disable superuser root in phone settings)
I've bootloader unlocked. Type of root... I suppose magisk root. What is xxxxx-arm64-bg* ? This is a ROM? I can't find this
Toranks said:
I've bootloader unlocked
Click to expand...
Click to collapse
it is clear to me , but I asked about the unlocker key . In other words, can you unlock the BL again if necessary?
Toranks said:
What is xxxxx-arm64-bg* ?
Click to expand...
Click to collapse
For example:
crdrom-v300m-210228-arm64-bgZ.img.xz
Toranks said:
I can't find this
Click to expand...
Click to collapse
search e.g. "Arrow", "AOSP", "Resurrection Remix", "Pixel Experience Plus" etc.
-Alf- said:
it is clear to me , but I asked about the unlocker key . In other words, can you unlock the BL again if necessary?
For example:
crdrom-v300m-210228-arm64-bgZ.img.xz
search e.g. "Arrow", "AOSP", "Resurrection Remix", "Pixel Experience Plus" etc.
Click to expand...
Click to collapse
Yes, I can unlock BL again. Thanks, I will search. But now I have a new problem... on an asian P20 Lite (spcseas) g-sensors doesn't work if I install any EU ROM
If anybody knows what is the password of this file, I would be grateful:
ANE-LX2 9.1.0.209(C636E4R1P5T8) Full Stock ministryofsolutions.com
(Not "ministryofsolutions.com", as usual)
This is the only asian 9.1 firmware available without pay
¡Finally! I find an 9.1 asian firmware on an Turkey forum, previous registration. Installed via dload without problems, and g-sensors works. Now I will try to root...
Link: https://drive.google.com/file/d/1lJ...72eN9WcwwaMgKHqhcWNYFA2wzslg0CgzZHZLsTLfuSJLQ