I have two Mate 10s, one is the ALP-AL00 and the other is the ALP-L29CC636. Firmware Finder shows that updates are available for both of these devices but when I select to download them the System update says 'No updates'. How do I update them?
okizen said:
I have two Mate 10s, one is the ALP-AL00 and the other is the ALP-L29CC636. Firmware Finder shows that updates are available for both of these devices but when I select to download them the System update says 'No updates'. How do I update them?
Click to expand...
Click to collapse
As of June Huawei started using https so FF can't send it to System Update. You would have to use HWOTA or TWRP with HuRUpdater.
Thanks ante0
Does that mean I should wait for the official updates from Huawei instead? And does using HWOTA require root?
okizen said:
Thanks ante0
Does that mean I should wait for the official updates from Huawei instead? And does using HWOTA require root?
Click to expand...
Click to collapse
HWOTA requires unlocked bootloader, same as TWRP.
You could wait, AL usually get updates fast
And FW shown on FF can be beta and test too, so just because a new fw appeared doesn't mean it will be pushed to devices eventually.
ante0 said:
HWOTA requires unlocked bootloader, same as TWRP.
You could wait, AL usually get updates fast
And FW shown on FF can be beta and test too, so just because a new fw appeared doesn't mean it will be pushed to devices eventually.
Click to expand...
Click to collapse
Ok, I think I'll wait a little while longer.
Thanks again ante0.
ante0 said:
HWOTA requires unlocked bootloader, same as TWRP.
You could wait, AL usually get updates fast
And FW shown on FF can be beta and test too, so just because a new fw appeared doesn't mean it will be pushed to devices eventually.
Click to expand...
Click to collapse
The ALP-L29 8.0.0.138(C636) is actually approved for installation according to FF. So it shouldn't be to long...
mscion said:
The ALP-L29 8.0.0.138(C636) is actually approved for installation according to FF. So it shouldn't be to long...
Click to expand...
Click to collapse
Thanks mscion.
Related
JFYI I've just got Android 8.0 on my Huawei P10 VTR-L29 in Denmark. It's not a beta. Did you get yours too?
Nope still stuck on B162 in New Zealand
B180 in Croatia still
xodeus said:
JFYI I've just got Android 8.0 on my Huawei P10 VTR-L29 in Denmark. It's not a beta. Did you get yours too?
Click to expand...
Click to collapse
Which version did you have before? I am still on VTR-L29C432B185 (from FF).
Still have B180...
Enviado desde mi VTR-L29 mediante Tapatalk
I'm also still on VTR-L29B432 B185 from FF in Germany
still on B185 in Romania, VTR-L29B432 B185 from FF.
I m still too on B180 from FF with my VTR L29 C432
NolanBart said:
Which version did you have before? I am still on VTR-L29C432B185 (from FF).
Click to expand...
Click to collapse
I was on 185 for like a week.
Still on B185 on my VTR-L09 in the UK which i updated myself using FF, B360 still not approved for my phone yet so it looks like a imei lottery as to who get's it first.
ixon2001 said:
Still on B185 on my VTR-L09 in the UK which i updated myself using FF, B360 still not approved for my phone yet so it looks like a imei lottery as to who get's it first.
Click to expand...
Click to collapse
Yeah, same here.
My wife recueved the update tonight.
P10 L09 - 185 to 360.
Germany
xodeus said:
I was on 185 for like a week.
Click to expand...
Click to collapse
Sorry, with B185 version installed manually (FF) or received via OTA?
NolanBart said:
Sorry, with B185 version installed manually (FF) or received via OTA?
Click to expand...
Click to collapse
with all respect, it seems you have more infos if you know the difference between OTA and FF. Can you be more explicit ?
iohannf said:
with all respect, it seems you have more infos if you know the difference between OTA and FF. Can you be more explicit ?
Click to expand...
Click to collapse
Firmware Finder provide a forced installation,
IMHO, this method differs from a regular update received via OTA (because you do not respect the scheduled update times).
I suspect a manual update may cause delays in subsequent updates
NolanBart said:
Firmware Finder provide a forced installation,
IMHO, this method differs from a regular update received via OTA (because you do not respect the scheduled update times).
I suspect a manual update may cause delays in subsequent updates
Click to expand...
Click to collapse
not really, through FF nothing is forced because there is no root or unbricked bootloader, all is about is availability of firmwares, on operating systems nothing is touched, updates are performed from OTA actually, it is just a trick per se .
anyway, back to our sheeps, i have buddies who got Oreo updates and were on B185 from FF, is not my situation but as somedody says before is like imei lottery
iohannf said:
not really, through FF nothing is forced because there is no root or unbricked bootloader, all is about is availability of firmwares, on operating systems nothing is touched, updates are performed from OTA actually, it is just a trick per se .
anyway, back to our sheeps, i have buddies who got Oreo updates and were on B185 from FF, is not my situation but as somedody says before is like imei lottery
Click to expand...
Click to collapse
All true. With the term "forced" I mean that it is installed without respecting the timing established by Huawei for its IMEI code.
So... I hope to receive the update soon.
xodeus said:
JFYI I've just got Android 8.0 on my Huawei P10 VTR-L29 in Denmark. It's not a beta. Did you get yours too?
Click to expand...
Click to collapse
Nope im on B185 Still
Phone is from Callme.dk and Vtr-L29c432B185 ..
FF says not approved for download and Ota is no updates.
NolanBart said:
All true. With the term "forced" I mean that it is installed without respecting the timing established by Huawei for its IMEI code.
So... I hope to receive the update soon.
Click to expand...
Click to collapse
hope so me too, for everybody
Yuriksat said:
I'm also still on VTR-L29B432 B185 from FF in Germany
Click to expand...
Click to collapse
In FF B360c432 is approved for Install for L29
Friends, if the firmware is not approved in FirmwareFinder we can only download and do not install??
It will download but It won't install. Since today it can't find any firmwares for the c432...
inthedark22 said:
It will download but It won't install. Since today it can't find any firmwares for the c432...
Click to expand...
Click to collapse
FF's database was down, it's back up now.
My firmware is the bla-L29 8.0.0.126 and I'm still with the March security patch.
To update, pay the Funkhuawei or wait for the update to arrive?
Hi,
HFF'S work properly for me, I have mate 10 pro L29-C185 this afternoon I find .133 firmware (previously I was on .126) downloading I just installed it. Everything it's ok
Is it possible to download the firmware and flash it with TWRP?
Lykeul said:
Hi,
HFF'S work properly for me, I have mate 10 pro L29-C185 this afternoon I find .133 firmware (previously I was on .126) downloading I just installed it. Everything it's ok
Click to expand...
Click to collapse
was it approved? what method did you use to install?
Buran79 said:
was it approved? what method did you use to install?
Click to expand...
Click to collapse
For downloading firmware I use in-app method and after download use update button from huawei system, you know in settings->system->update system
Psych Engel said:
Is it possible to download the firmware and flash it with TWRP?
Click to expand...
Click to collapse
You can using https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
I've tested it and it works on Mate 10 Pro
ante0 said:
You can using https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
I've tested it and it works on Mate 10 Pro
Click to expand...
Click to collapse
Thanks for answering. Where I've to place the files, because the Mate 10 Pro doesn't have a SD card?!
Lykeul said:
For downloading firmware I use in-app method and after download use update button from huawei system, you know in settings->system->update system
Click to expand...
Click to collapse
Was the firmware approved for download? In my bla-L29 8.0.0.126 says that the firmware are not approved for download, although it manages to download using FF itself.
Psych Engel said:
Thanks for answering. Where I've to place the files, because the Mate 10 Pro doesn't have a SD card?!
Click to expand...
Click to collapse
Internal storage, but you'd need to update TWRP to this one which has decryption support: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
rioferraz said:
Was the firmware approved for download? In my bla-L29 8.0.0.126 says that the firmware are not approved for download, although it manages to download using FF itself.
Click to expand...
Click to collapse
What your region cust? C185 C432 C576 C605...
ante0 said:
Internal storage, but you'd need to update TWRP to this one which has decryption support: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
Click to expand...
Click to collapse
I'm using this one. Was the first one with an BLA-L09 device. If I place it on the internal storage, won't it be deleted, because I've to wipe all partitions? Sry for so much questions, I only won't brick my phone. Now a lot about this stuff, but each phone is unique and has its own special things to look for.
Psych Engel said:
I'm using this one. Was the first one with an BLA-L09 device. If I place it on the internal storage, won't it be deleted, because I've to wipe all partitions? Sry for so much questions, I only won't brick my phone. Now a lot about this stuff, but each phone is unique and has its own special things to look for.
Click to expand...
Click to collapse
You don't need to Wipe anything. Internal sd is mounted in /data which is not wiped.
Well, it's either that or use HWOTA to update.
Or wait for firmware to be approved
Lykeul said:
What your region cust? C185 C432 C576 C605...
Click to expand...
Click to collapse
C605.
ante0 said:
You don't need to Wipe anything. Internal sd is mounted in /data which is not wiped.
Well, it's either that or use HWOTA to update.
Or wait for firmware to be approved
Click to expand...
Click to collapse
It's approved for my device. But it should be blocked on the device or I'm wrong. On my last devices, I wasn't able to update the original firmware from the system itself, because TWRP and Magisk were installed.
rioferraz said:
C605.
Click to expand...
Click to collapse
I find your firmware take the first of list, fullota-mf
Psych Engel said:
It's approved for my device. But it should be blocked on the device or I'm wrong. On my last devices, I wasn't able to update the original firmware from the system itself, because TWRP and Magisk were installed.
Click to expand...
Click to collapse
Yeah, you'd have to restore stock Recovery, and OTA might install (it checksums partitions and if they don't match the update fails)
You could still use Firmware finder to install FullOTA.
Lykeul said:
I find your firmware take the first of list, fullota-mf
Click to expand...
Click to collapse
Translating the dialog box: "The firmware is not approved for installation"
Hi there,
Now that Magisk won't install on ALP-L29 8.0.0.138 C636patch01 (july 1st security patch), is there a way to root with this firmware and especially this security patch?
Regards,
Does anyone know how to root this firmware version? Been scouring the web all week with no information
You should be able to downgrade to B138 using eRecovery, this would remove Patch01.
ante0 said:
You should be able to downgrade to B138 using eRecovery, this would remove Patch01.
Click to expand...
Click to collapse
this need unlocked bootloader too? because i tried but faild to get package.
hamadazh said:
this need unlocked bootloader too? because i tried but faild to get package.
Click to expand...
Click to collapse
No, unlock is not needed for eRecovery.
However, if you rebranded eRecovery will usually fail to get package.
ante0 said:
No, unlock is not needed for eRecovery.
However, if you rebranded eRecovery will usually fail to get package.
Click to expand...
Click to collapse
yes it's debranded it was ALP-AL00 and now ALP-L29.
fastboot can flash stock RAMDISK without unlocked bootliader?
hamadazh said:
yes it's debranded it was ALP-AL00 and now ALP-L29.
fastboot can flash stock RAMDISK without unlocked bootliader?
Click to expand...
Click to collapse
No way to do it.
Only way you could try is dload to B138, BUT I'm not certain what happens if you're now on 02 xloader.
ante0 said:
No way to do it.
Only way you could try is dload to B138, BUT I'm not certain what happens if you're now on 02 xloader.
Click to expand...
Click to collapse
but i read in some places and someone confirm 8.0.0.138 01patch is 01xloader, but i think or maybe the problem is from the newer security patch 1 july 2018. Funky huwaei support team told me that they can't read bootloader or rebrand also said erecovery will not working after debrand since 01 july newer security patch.
the problem too is i went to teammt.ru site for downloading 8.0.0.138 full rom but it's not available to download. maybe FF working not tried, but anyway i think i have to live with this, until huawei open unlock bootloader service again.
How to root in Patch01 update : https://forum.xda-developers.com/showpost.php?p=77560239&postcount=27389
does anyone have a ramdisk of alp 29 ?
I was able to download the huawei pie full update zip and data from FF and how do i flash it using fstboot, do i just flash the system or do i have to flash all the partitions within the update.app as its changing to pie from oreo and what are the commands to flsh the partitions, nit sure if it will flash as it is still unapproved and bootloader might deny flashing it i am not sure, any ideas.
I was able to install the ff firmware using beta flashy 0.2 tool and all is well.
lingarajug said:
I was able to install the ff firmware using beta flashy 0.2 tool and all is well.
Click to expand...
Click to collapse
Did it wipe all your data?. Hopefully not.
I got the official update on my mate 10 pro
The version is 9.0.0.159
The downside is the camera app seems unstable, and crashes every so often..
matemade said:
Did it wipe all your data?. Hopefully not.
Click to expand...
Click to collapse
I already had this phone factory reseted when i moved to pixel 3xl do i don't know if it did anything.
chaos_envoys said:
I got the official update on my mate 10 pro
The version is 9.0.0.159
The downside is the camera app seems unstable, and crashes every so often..
Click to expand...
Click to collapse
I flashed 9.0.0.121
Did somebody receive B197 as OTA?
lingarajug said:
I flashed 9.0.0.121
Click to expand...
Click to collapse
Which model do you have?.
Bla a09 us
lingarajug said:
Bla a09 us
Click to expand...
Click to collapse
Sorry to revive such an old post but wanted to ask you how you used the flashy tool. Did you drop the 2 pie files into the "zips here" folder? Did you need to unzip the pie update files? Another post mentioned unzipping but maybe that was because it was a p20. Did you use the beta pie files or actual non beta files? Has it been able to get normal updates ota since then? Thank you
Hello everyone, i'm waiting for update to emui 10 in morocco for my BLA-L29 and stiil don't receive it but k got in FF the update and wanna ask if i can use it or not. And if i can use it which version can i use?
Huawei mate 10 pro BLA-L29
No body knows ?
simuzer said:
No body knows ?
Click to expand...
Click to collapse
Check from HiCare. You can see update there.
alycann said:
Check from HiCare. You can see update there.
Click to expand...
Click to collapse
there is not for c432.
tissot73 said:
if i can use it or not
Click to expand...
Click to collapse
Not, theres no way to flash FW from Firmware finder. You can upgrade to higher EMUI version flashing Service ROM using dload method only. Afaik there's no Service ROM EMUI 10 for BLA models yet. IMO wait for OTA update.
P.S.: The best method to upgrade via Service ROM is searching for the Service ROM on https://androidhost.ru/ and doing the dload method. Process will erase all the data from your device !
(Before you do anything, read carefully Software Upgrade Guidline in "ReleaseDoc" . With Service ROM you will get full stock with locked bootloader. It is very important to choose your region! (C636, C432, etc.)
You have found some way to install it, since and tried in all ways and still do not know how to update it[emoji26]
Enviado desde mi RMX1931 mediante Tapatalk