There are a million threads on this; none of them have a "real" solution to this problem
there are those of us, who due to whatever reason (helmet cams, preference for posture, etc) want to record videos in portrait mode.
What happens (on my sgs2) is that the video records just fine in whatever resolution I pick... but it records it 90 degrees rotated to the right.
The solution that is usually offered is that "you can rotate it after!" yes... but then you have to CROP part of the image and lower the resolution. 1920 x 1080 recordings end up having to be cropped so that half of the view is cut out , or even more if you are maintaining a real aspect ratio.
The questions about "why not just hold it sideways", are just as pointless as the statement by steve jobs telling iphone4 users that they were holding their phones wrong.
is this something that can be remedied ? or has google decided that people should only record videos when their phones are in landscape mode?
i understand that we cant see landscape resolution in portrait mode; but can't we just have a viewport into the camera, but record in properly oriented landscape mode? so that playback on a computer will show the full resolution, even though we will only see part of it on the phone..
i think the iphone works this way?
as i have a severe case of self-diagnosed OCD. I do believe i am entitled to hold my phone vertically and take videos,plus its easier to hold with one hand
if and when i discover the answer i'll post it here.
maybe android 4.0 has solved the problem? I will investigate!
Anyone notice that one the T-Mobile Edge, that when you set "Video Stabilization" to "On" it actually doesnt stabilize the video?
Only when you set it to "off," it'll stabilized the video recording?
It's kind of the opposite, not sure why no one else noticed.
Could be wrong here, but I believe that while recording you not going to notice any stabilization. It's happening but you won't see it until replaying the processed video after the recording is done.
Pure+ said:
Could be wrong here, but I believe that while recording you not going to notice any stabilization. It's happening but you won't see it until replaying the processed video after the recording is done.
Click to expand...
Click to collapse
To check video and photo stabilization, try zooming in to 3x, point it at something and try to do a recording with it On and off, the video will do the opposite.
It work none the less, but it's counter intuitive to have it day off when it's actually on.
OP seems to be spot on. Same problem with my regular S6. Video stabilization = off turns stabilization on. With it = on, videos are jittery as hell where even my pulse through my fingertips causes the camera to shake.
So guess there's a bug in the camera app.
I just noticed the same thing with my unbranded regular Galaxy S6. If you have video stabilization turned on in camera app settings it is in fact turned off. I was surprised how poorly it stabilizes the video, so I had to use 'Stabilize' option in YouTube. Then I thought maybe my optical image stabilization component is damaged so I started playing with it and once I turned it off my video stabilization started to work very well. So it seems to be a bug in camera software. Anyway - if you want to have video stabilization you need to have it turned off Samsung logic
The reasoning is because the video stabilization setting in the camera app turns on DIGITAL Image Stabilizing by Samsung via software which is really just counterproductive to the Optical Image Stabilization already built into the camera.
So yeah, trust the OIS hardware because typically hardware > software in this field.
facetubespam said:
The reasoning is because the video stabilization setting in the camera app turns on DIGITAL Image Stabilizing by Samsung via software which is really just counterproductive to the Optical Image Stabilization already built into the camera.
So yeah, trust the OIS hardware because typically hardware > software in this field.
Click to expand...
Click to collapse
Just a question so OIS is default by default and always on am I right? Even on UHD recording?
More evidence that the switch in the camera options refers to DIGITAL image stabilization:
Set video resolution to FHD (not the 60fps option). Otherwise, the Video Stabilization setting is not available (grayed out).
Set the Video Stabilization setting to "ON".
Go back to the camera, zoom in fully (8x). While pointing at something easily identifiable, without shooting video, note that the image is stabilized quite well -- you can simulate "shaky hands" and the image is very stable, not jittery. However, you are not shooting video yet, so settings specific to video are not activated. What's happening here is the OIS is working, and doing a very good job.
Now, click the video recording button. You will notice two changes in the image: It will zoom in a little bit more without any zooming input from you, and the image will get rather UNSTABLE.
It turns out, what you had selected in the settings is actually, truly, being invoked. No, this is not a bug. The switch is not acting the opposite of how its labeled, even though the RESULT is exactly that in practice.
Here's what's happening: As someone else noted, that switch controls digital image stabilization. This is a software process, that basically crops off a small margin all the way around the picture and reserves these pixels for calculating a smaller moving "window" in the larger captured image space. The software tries to move this window around so that it follows the random small movements from jiggling, unsteady hands, etc. In this way, the image appears stable rather than moving around in the capture space.
This is why, when DIS is turned on, the displayed image zooms a little bit -- that's the "reserve image edges" being cropped off and the remaining image being expanded into the display area.
So, here's what I think is happening: When you have Video Stabilization on, the phone turns off OIS and enables the DIS algorithm. The OIS camera hardware is something like a Googolplex times better as IS than Samsung's crappy algorithm, so the end result is the appearance of IS being turned OFF and a little loss of resolution of the video image as well.
Once the video is stopped, after a few seconds you'll see the DIS turned off, OIS turned back on, and the image will zoom out a tiny bit and become very stable again.
Bottom line: The Video Stabilization setting in the S6 camera app is worse than useless. It's adverse. It should be left off at all times under all conditions.
How did this happen? My guess is, the engineering team responsible for the hardware was organizationally distant enough from the camera software team (keep in mind the latter are trying to develop an app that can run across many phones). The hardware guys put this incredible camera in the phone with awesome OIS. The software guys, not focused only on the S6, passed through the DIS that's been in the camera app forever, and no one engineer was responsible for integrating all this stuff for the camera feature itself, testing it, making sense of it, blah blah blah.
And here we are.
Bottom line: Because of the OIS in the S6, the DIS feature in the camera app is unnecessary and should be left OFF. In fact, the way it works misleads the user into thinking IS can't be had with the video resolutions higher than non-60fps FHD. In fact, exceptional IS is available at all times in all resolutions for stills and video -- the hardware OIS is always on the job, unless you turn it off by turning on the [digital] Video Stabilization option in the settings.
The only bug here, if any, is that this setting seems to turn off OIS, when it doesn't need to. Perhaps with OIS on, and the DIS processing applied to that stabilized image, we might get something even better than OIS alone. Alas...
What I mean is ... let's say I am using Skype for a video call. At the moment of connecting to the camera, what is the way it does this? What code is used? What part of the camera is accessed? When I open the camera app of the device, and trigger between photo/video - I get 2 absolutely different images of the preview ( the viewfinder ). The photo preview is on a low fps, if there is enough light, if I reduce the brighness, the preview fps gets smoother.
But when I swicth to video , I get a very clear image, with a high fps, little noisy and clear. Though, the preview of the photo camera is blury ( noise reducted ) and low on frame rate.
So, the calls in Skype has the exactly same image type like the photo preview, blury and fps low.
Is there any way to drive Skype using the camera type of the video viewfinder? It is a very huge difference in quality, and it is very weird, video calling apps use the worst part of the camera, when there's actually obvious the sensor is a high end one, showing it actually can offer a good quality of the image ( while in video mode ).
Please help, I want to try to develope something related to this. How does an app choose how to use phone's camera?
So, I've just noticed that the video shooting is really cropped in..
Its like it zoomed in alot..
Its in every camera lens like that, respectedly.. so the wide lens video is about the same as the normal lens at photos..
I guess the reason for that is because the original sensor is built for 4:3 aspect ratio and the video mode is 16:9 so it crops out the edges..
In settings, all the resolution options are 16:9 (or worse 18:9)..
Is there any way to get the full wide angle view in video?
I don't care about aspect ratio (any way its going to instagram and gets ruined )
I would like you to check something that drives me mad with my new Oppo Reno 2. In camera settings, I always set video settings in 1080p and 60 fps. Whenever I change to bokeh effect or wide angle for example, when I untick one of them, values for camera reset to 1080p 30 fps. It´s annoying changing this every time I want to make a video. Even if I do not change anything and shoot a video in 60 fps non ultra stabilization mode, and get out of the camera app, a time later when I enter again, values for camera are changed to 1080 30 fps again. I do not know the reason why or because it is something about performance or battery saving or not.
I just would like you to check if this happens. Change settings to 60 fps and change to wide angle or do not change anything and do whatever you want with your smartphone and after a while, don´t know how much, enter again and see if it changes. Much appeciate it.
EDIT. I must add that it seems that setting main camera to 48 mg also resets to default after a while. What´s this?
Haha. Happens to me either.
I was like "what the hell, didn't I switched to 60fps the other day?"
Let's just hope that Color OS 7 will fix this little issue.
Thanks a lot mate. Thanks a lot for answering. It's a really great great beautiful stylish smartphone and I'm glad I'm not the only one facing that bug. Anyway, I will always stick on 1080p 60 fps through ultra stabilization button every time I use the video because I think it's incredible the result, too much to miss it. That's the trick I use.
I'm new with this Oppo, only two days and I'm getting used to it. And one thing around my mind is the aspect ratio of photos. The gorgeous screen invites me to take photos in full screen mode as the difference in quality seems not to be enormous and this full screen makes people astonish when they see a photo just taken at the moment in all its splendor without any black bars at both sides.
But I know the quality is 4000x1800 in full screen mode and 4000x3000 in 4:3 aspect. Do you prefer taking photos in one or other aspect ratio? The screen is so good that I don't want to miss anything at all. And as we can't yet use our personal preferences in settings such as 48 megapixels mode, which I'll stick if its solved by an update, which are your preferences when taking photos according to these two aspect ratios? And thanks again. Writing from Spain here.
Well, i'm no expert at all, but i'd say that 48mpx mode is the only mod i would not advise, as there's always some loss in terms of color.
Using full-screen mode or default 4:3 is probably based on personal taste. You're losing much information (as the photo is much narrower) and it can be harder to put everything you want in the frame.
Though, it looks very good in the phone's gallery indeed.
I'd probably go for using full screen if you watch your photos only on your phone, but 4:3 for a more versatile use.
Mates, absolutely solved everything with new update to Color 7. Camera settings will remain as our personal preferences. More intuitive camera options. Now it's perfect.
About using one or other aspect ratio in photos, I mean in terms of quiality, I don´t know what to do. I do not want to loose quality using full screenmode if that means that using 4.3 aspect ratio implies a better quality. But what I can tell is that versatility is also present in full screen mode because if we see photos on tv, it aproaches to that aspect ratio and there´s more space taken by the picture on screen. Making a photo report or video report also takes advantage of this ratio because when we use the programs to edit photos and make a photo compilation, it adapts to that kind of format. So the only dude here is quality. Perhaps is the same in both modes.