My battery percentage stucks at mostly 97% to 99% never goes full charge, thou ampere sees it as fully charged on 97% or %98. How can i fix this thing? Without opening the hardest back cover in the century of smartphones.
Edit: Tested with RR Oreo 6.1.0 07231028 build and it went up to 100% fully without single interruption. But on MIUI it never goes beyond 97% i have to replug and unplug the cable several times to get it to 99%.
Same ..bt i changed rom bt nothing happned.what can i do
same with mine. Before Im using AOSP rom then I revert back to Masik U 2.5. I need to power off to reach 100% if not its always 98% and plug and unplug.
Thanks
How u fix this
After switching from miui 10 to miui 9 i had this problems: battery never full charge, phone gets hot while charging, at 15% left jiuce phone switches off. I tryed to clean all and flash, i even relocked bootloader it fixed it temporary.
So I called service, guy told me that when you go back with os version sometimes drivers go bad, sometimes wifi, battery, signal, etc. He told me to send him a device and he will try to fix this. I sent him and he fixed it. Btw i noticed that it was installed miui 9.2.6.0 NEGMIEK. He didnt told me what he did but you can try to flash this version of miui maybe it will fix.
It looks like MIUI based misreading or like the reply #3 said maybe driver issue. I'm upgrading my device to MIUI 10 8.8.30 to see if it fixes this thing up. If not i'll have to sadly request assistance..
bdogan1912 said:
My battery percentage stucks at mostly 97% to 99% never goes full charge, thou ampere sees it as fully charged on 97% or %98. How can i fix this thing? Without opening the hardest back cover in the century of smartphones.
Edit: Tested with RR Oreo 6.1.0 07231028 build and it went up to 100% fully without single interruption. But on MIUI it never goes beyond 97% i have to replug and unplug the cable several times to get it to 99%.
Click to expand...
Click to collapse
When on miui 9/10, root it, install a root explorer then go to data/system. There will be two or three files named batterystats.bin, batterystatsdaily.xml and one other file (can't remember the name as I am using Masik 2.5 and it doesn't have these files). Just delete them after your phone charges to 97 or 99 % , close all background apps and again plug in the charger and check if it goes to 100%......
I tryed that before, it will give temporary fix, even reflashing 9.5.6 miui didnt help, better ask for assistance they have another tools for flashing roms. Guy from service told me before that he dont need unlocked bootloader to flash rom. Becouse i told hom that i relocked bootloader and i have to wait 360 hours to relock again. Sorry for bad english.
daca0 said:
I tryed that before, it will give temporary fix, even reflashing 9.5.6 miui didnt help, better ask for assistance they have another tools for flashing roms. Guy from service told me before that he dont need unlocked bootloader to flash rom. Becouse i told hom that i relocked bootloader and i have to wait 360 hours to relock again. Sorry for bad english.
Click to expand...
Click to collapse
Yean, there is no need for unlocked bootloader to flash stock miui rom. They use EDL mode to flash the rom which automatically locks the device. You can try this method on your own only if you know what to do or else go to the service centre...
download terminal app from google play store (like Terminal Emulator for Android)
or
if you have orangefox twrp, go in ADVANCED - TERMINAL
and type
Code:
su
rm /data/system/battery*
alternatively, you can use file manager from orangefox
after you have to turn off the smartphone
Open the phone and remove battery for a while, and plug in again....
this definitely fix the problem...
I have a same problem
But I have a solution
Try one time charge don't disconnect a cable while charging
Battry gets 100% charged
Did anybody find any solution for this? I tried everithing, but on MIUI it doesn't charge up fully. It stucks at 97%. And it won't charge further even after a power off.
minikahona said:
Did anybody find any solution for this? I tried everithing, but on MIUI it doesn't charge up fully. It stucks at 97%. And it won't charge further even after a power off.
Click to expand...
Click to collapse
My solution was to disconnect battery from motherboard for 5 minutes and connect it back. I didnt turned phone on, just connected charger (green battery only on screen)
This should help.
If you dont want to dissasemble your phone, calibrate your battery with root and app. But first discharge it to 0% and plug charger and turn it on. From 0% it should charge 98% or 100%. If 100% shows you can be free, if 98% shows try method with app.
Good luck!
skrubxgt said:
My solution was to disconnect battery from motherboard for 5 minutes and connect it back. I didnt turned phone on, just connected charger (green battery only on screen)
This should help.
If you dont want to dissasemble your phone, calibrate your battery with root and app. But first discharge it to 0% and plug charger and turn it on. From 0% it should charge 98% or 100%. If 100% shows you can be free, if 98% shows try method with app.
Good luck!
Click to expand...
Click to collapse
Thank you for your reply. I already tried the 0 to 100% but unfortunately it doesn't wotk. It only reach 97%. Someboy mentiond in this thread that they reached 100 on cutom roms and this is what my phone does too. I tried the unofficial pixel experience pie rom, and my phone reached 100%. But when i reverted back to stock, or xiaomi.eu it only charge till 97%. I don want to take it apart, so I think that's it. I have to live with it.
Got the same issue on mine.
Only charge to 96% when the phone is on and 97% when the phone is off.
Same issue on Miui 10 global and EU 8.12.27.
Besides opening the phone to unplug the battery, had anyone tried to flash via fastboot miui 9 again?
On miui 9 i didn't had this issue.
Later i will try to flash miui 9.5.11.0 via fastboot to see if it fix the issue and report back.
Thanks.
Edit: tried 9.5.11.0 same result.
Will try now pixel experience official and unnoficial
I have a probelm too
My mobile battery stuck on 97%
How to fix it
Related
my x10 die suddenly, there was 94% battery left, not plugged out long, few hrs later notice phone was off,and it will not power on again, press power to try to turn it on all it does is vibrate and that's it.
tried to flash stock 2.1 back on but not sure if it did anything, took over night or flash tool to finish, still no boot after that, press power and it vibrates that's all, sometimes it doesn't even vibrate, battery is good, works fine in another x10, put a fully charge battery in it and same result.
anyone know what happened to it?
was running eternity 3a rooted with DT.
I'm going to have to send that in for warranty, hope they won't find anything on it and void the warranty.
Was the phone quite hot at the time or heating up when trying to boot?
Remove the battery for a minute or so and try flashing with SEUS.... Check if battery is hot
sharathx10 said:
Remove the battery for a minute or so and try flashing with SEUS.... Check if battery is hot
Click to expand...
Click to collapse
That usually does the trick. Unplug battery for 1 minute, reinsert it and try again.
That heating problem is present in X8 too... While tethering is enabled phone gets very hot and if you don't act phone will freeze...
do you have a SD card inside. Might be a bad SD card try taking it out and booting it. Happened to me before.
blagus said:
That heating problem is present in X8 too... While tethering is enabled phone gets very hot and if you don't act phone will freeze...
Click to expand...
Click to collapse
Hi, just wanted to jump in and ask a few questions about this situation.
Do you always experience this issue? How long before it freezes? What "act" are you doing to prevent freezing? Does the phone work normally afterwards?
Hope you can help me out with some answers, I want to look into this.
instead of starting a new thread,i'll post here..
i have this restart problem..
Before this i try to fix my friend X10.. after many tries and a month acctually,i give up..
Now one more of my friend gave me another X10 which have the same problem..
Problem:
The phone will boot but after several minutes it will auto shut down and when i try to power up no vibrate and stuck at black screen.
when i pull the battery out and on again it vibrate and boot.just after boot animation it will shut down again..
Solution that i have tried so far:
Update with SEUS.
Send to profesional phone service to downgrade to 1.6.
Upgrade/flash with flash tool with GENERIC
Upgrade/flash with flash tool with X10_1.0_SE_StockRom_MultiTouch
Wipe user data in flash tool & x recovery
after several tries i got it work and i root and install x recovery.
Flash from xrecovery with custom rom Eternity.build003a.signed
format memory card.
Change battery.
All the solution i've tried doesn't make the problem dissappear.
anyone have ideas or solution?
So, sort of long story, i'll cut it short
-Got an old X10, had stock 2.3.3
-Rooted it
-Did not unlock bootloader, got kinda scared.
-Tried to install FeraLab custom ROM, it failed probably because of sdcard permissions; i accidentally wipe /system /data /cache
-stuck at first Sony Ericsson screen
-Somehow managed to flash a 2.1 stock rom with flashtool, after an hour of different combinations of enterring flash mode and pulling the battery
-Tried to install FeraLab again, this time it went through
-After install, rebooted, phone shut down during boot up process
-Will not turn on at all. Even when plugged into a PC, wall, not plugged in, pulling battery, etc.
I think what happened is that FeraLab needed a newer baseband than the 2.1 stock rom had. Does anyone have any suggestions on how to get this sucker to even turn on? Not a single LED is on when plugged in, giving me the impression that it's not charging.
If the battery has drained out, it might take some time before it kicks in and indicates that it is charging.
If the ROM has failed somehow, it might not show that it is charging at all, but might be charging.
Either way: Let it charge "blindly" for a while, and see what happens.
Once it does boot up to some level or shows life-signs, let it charge fully before you'l attempt a ROM flash.
The flash/recovery mode needs a full battery, and reason is that the external power isn't used even when connected while in flash/recovery mode.
If you happen to be in bad luck, and the ROM failed as a result of a drained battery, you might have to charge the battery externally. Use an external battery charger made for 3.6 volts Lithium Polymer batteries, and make sure to align the + and - terminals properly.
I can recommend the multicharger from Powerbase, called C-734U:
http://www.powerbasehk.com/product.php?id=148
Using it myself to charge the X10 battery, as well as other batteries from other devices I have.
EDIT:
(For some reason, powerbase has taken back that it'll charge Lipo batteries, but when I bought mine, it was described as a li-ion, li-poly and Ni-MH charger, and it't ability to charge li-poly batteries was the very one reason to why I bought it.
I suspect PowerBase does not want to take responsibility if anything happens to the li-poly-batteries, as they are known to be more dangerous than other types.)
I've left it on the wall charger all night, no response or anything. Luckily, I bought a new battery a few days ago, so when that comes in, hopefully it will be charged enough for this thing to boot.
Do me a favour are u able to take screebshot of settings, about phone menu and post it here? Need to see ur baseband and kernel
Sent from my X10i using XDA
laneyofdeath said:
Do me a favour are u able to take screebshot of settings, about phone menu and post it here? Need to see ur baseband and kernel
Sent from my X10i using XDA
Click to expand...
Click to collapse
Dude his phone wont start up. How come he'll be able to take a screenshot
Sent from my LT26i using xda premium
king-iyokan said:
Dude his phone wont start up. How come he'll be able to take a screenshot
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Yeah, i'm not sure what he expected. But, good news! Now for some reason my phone started blinking red whenever I tried to turn it on! I guess the battery completely ran out or something. It also blinks every now and then when plugged in, so I guess it's charging. The previous owner of this phone said that it had some battery problems, so that's why I ordered that new battery. I'll let it charge for awhile and let you guys know what happens.
Okay, after getting my new battery, the phone will still not turn on. I think i've figured out two behaviors:
1. If the battery is nearly completely out of charge, it will flash a red light
2. If the battery has charge, it will not do anything at all.
Anyone know how to fix this?
While trying to turn on the phone, after long-press power button, do you get a flash from status led & short vibration?
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
ToledoJab said:
While trying to turn on the phone, after long-press power button, do you get a flash from status led & short vibration?
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
Click to expand...
Click to collapse
No vibration, the red LED flashes three times, and that is , as I said before, what happens when the battery seems to not have any charge. If I have a charged battery it does absolutely nothing.
Have you removed sim & sd card and tried. I know it sounds dumb but when I flashed a bad kernel I had to try to connect flash mode like 10 times. Finally I left the phone unplugged from pc, started flashtool and started flashing. I only put battery in phone just before holding back key. I never connected USB until tool said to dis-connect phone and connect in flashmode.
i wish you luck, I know how I felt when it went wrong
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
FireFreek said:
So, sort of long story, i'll cut it short
-Got an old X10, had stock 2.3.3
-Rooted it
-Did not unlock bootloader, got kinda scared.
-Tried to install FeraLab custom ROM, it failed probably because of sdcard permissions; i accidentally wipe /system /data /cache
-stuck at first Sony Ericsson screen
-Somehow managed to flash a 2.1 stock rom with flashtool, after an hour of different combinations of enterring flash mode and pulling the battery
-Tried to install FeraLab again, this time it went through
-After install, rebooted, phone shut down during boot up process
-Will not turn on at all. Even when plugged into a PC, wall, not plugged in, pulling battery, etc.
I think what happened is that FeraLab needed a newer baseband than the 2.1 stock rom had. Does anyone have any suggestions on how to get this sucker to even turn on? Not a single LED is on when plugged in, giving me the impression that it's not charging.
Click to expand...
Click to collapse
Try to flash any latest kernel via flashtool . Go for doomkernel . I think its software issue . Try this first .
Almost same here please help..
Last night battery ran out of charge & phone switched off.. then i plugged the charger it doesn't charge.. after some time i tried turning on.. Vibrates with the green LED but nothing happens then..
Note: This is not the 1st time i'm letting my phone drain, but facing this problem for the 1st time..
Rom : Spikelabs GB Gaming rom
Kernel : Ferakernel v23 beta6
I tried another battery, charger, data cable.. Tried flashing stock & spikelabs kernel., but of no use..
Any help is greatly appreciated..
Thanks in advance.. :good:
Something like that happened to me not long ago!
I was trying to flash some ROMs and I messed up then my phone wouldn't turn on!
But Miracously, I could flash a Stock 2.3.3 which fixed the problem!
At first, I used Sony PC Companion, which helped a lot- and after I screwed it for the second time, I used FlashTool-
I don't know if this was helpful, but I hope your x10 will be fixed soon!
yeah try the PC Companion first, it helped me too a couple of weeks ago
No luck...
Hi friends..
Tried to repair using PC companion, but was able to connect only in flash mode, unable to proceed software update..
I previously tried flashing stock GB using flashtool thrice. Still couldn't switch on the phone.. What else may i try..
Thanks friends..
ashok weird said:
Hi friends..
Tried to repair using PC companion, but was able to connect only in flash mode, unable to proceed software update..
I previously tried flashing stock GB using flashtool thrice. Still couldn't switch on the phone.. What else may i try..
Thanks friends..
Click to expand...
Click to collapse
try flashing kernel other than spikelabs (e.g. feravolt,doom,achotjan,zkernel..etc.)
sanababitz said:
try flashing kernel other than spikelabs (e.g. feravolt,doom,achotjan,zkernel..etc.)
Click to expand...
Click to collapse
Tried Ferakernel, Stock GB kernel, etc bro.. No luck..
Flashed Stock GB firmware more than 3 times still no luck :crying:
SEUS not working _ couldn't connect to network..
SUS does not have x10 enlisted
Went to 3 service shops at - Ritchie street, Chennai. They simply said harware issue (Short in board) and gave back the phone.
Now given at a better service centre. Will get back on monday it seems. Will update the status friends..
Thanks..
Here also they said the same reason friends.. Short in board..
Is there any way i could recover the phone???
Hey guys i've a problem with my x10
So one night i was playing with it than the other day the phone would start
so i thought yeah right might be the battery or something. i took it to my friends x10 it was with 87% charged so i exclude this
Than i tried to flash with flashtool a new kernel and i get stuck at 9% or 15% depending on the kernel i use.
With SEUS it starts to repair but it says. No new updates avaiable after a few moments.
Some information regarding my phone
Unlocked Bootloader
FXP KERNEL
MM TEAM MIUI V4
The phone vibrate but doesn't start or load the kernel.
What do i do?!
Srry for my bad english
Thx in advance
Usrle flashtool to reflash kernel or firmware.
already did but i get stuck at 9% or 15% flashing the kernel
I'm downloading a full generic rom x10a
having similar problem
Hi, I had similar problem as well
X10i running FXP CM7 suddenly just wont boot n charge after I turn off the phone
it wont boot after flashing anything (firm or kernel) except the official firm
now that I end up with a cap R bootloader but flashtool claim that bootloader is rooted
do I still keep the bootloader unlock?
i guess you have a locked bootloader since the original firmware is loading just fine even tho rooting has nothing to do with the bootloader it self. i'm only guessing.
I'm stuck at. Flashing Loader
I bricked my phone last week and it got stuck in a boot loop.
I downloaded the x10a generic Stock ROM and flashed it via Flashtool and it worked like a charm.
Hope this helps.
[XBOCT]™ said:
I bricked my phone last week and it got stuck in a boot loop.
I downloaded the x10a generic Stock ROM and flashed it via Flashtool and it worked like a charm.
Hope this helps.
Click to expand...
Click to collapse
But that way you weren't at a brick point.
You get brick when u get those 3 blink red LED and the phone doesn't do anything
By the fact that your phone were able to load the kernel. i guess
same problem repeat
Hi, just confirm that the bootloader remain unlock as long as the flashtool claim its ROOTED
had you try other than official 2.3.3 ftf?
because I just got the same unable to boot problem repeated again
this time cant get boot on even stock 2.3.3 firm
but I was able to boot up and charge on 2.1, then get root, recovery and kernel (w/o unlock bootloader again) and go straight to custom ROM with no problem
mooving said:
Hi, just confirm that the bootloader remain unlock as long as the flashtool claim its ROOTED
had you try other than official 2.3.3 ftf?
because I just got the same unable to boot problem repeated again
this time cant get boot on even stock 2.3.3 firm
but I was able to boot up and charge on 2.1, then get root, recovery and kernel (w/o unlock bootloader again) and go straight to custom ROM with no problem
Click to expand...
Click to collapse
i'm using
X10a_2.1update1_r2.1.A.0.435_Generic.ftf
And it get stuck at Flashing loader
Idk but i can "read" the kernel when i dump the propriets but i can't "right" when i try to flash something
Anyone?
guys?
you said your phone is "bricked"
I'm not sure if you know what that means.
If you say you've bricked your phone then no one can help you.
A brick is a brick. It doesn't matter if it weighs a few kgs or a few hundred grams. A brick can't receive phone calls.
And your phone isn't even a normal brick... You wrote that it's "really bricked"
Are you building a house anytime soon?
LJE said:
you said your phone is "bricked"
I'm not sure if you know what that means.
If you say you've bricked your phone then no one can help you.
A brick is a brick. It doesn't matter if it weighs a few kgs or a few hundred grams. A brick can't receive phone calls.
And your phone isn't even a normal brick... You wrote that it's "really bricked"
Are you building a house anytime soon?
Click to expand...
Click to collapse
maybe i'm wrong idk maybe is a soft brick. thats why i'm asking for some help.
almomdegal said:
But that way you weren't at a brick point.
You get brick when u get those 3 blink red LED and the phone doesn't do anything
By the fact that your phone were able to load the kernel. i guess
Click to expand...
Click to collapse
The red led blinking rapidly three times means the battery is "out of juice".
I've said it earlier: Several X10 devices have reached an age, where battery failures are fairly common due to charge cycles and/or age. Specially if one got it just after the launch.
Anyhow, what you can do, is let the device charge "blindly" for a while, and a while I mean for half an hour to a few hours. Then it should, out of the blue, jump into "active" charging (With the battery screen showing offline charging)
If this doesn't happen you might have to charge the battery externally.
...or even replace the battery.
-"Why?", one might ask.
Reason is that the flash mode only works with a charged battery.
If it empty, it won't engage the flash mode at all. Stupid design, yes, but that is how it is.
Worst thing is, that the battery does deplete/discharge while in flashing mode. That is why it's so important it's fully charged and fully working, before one engages in flashing activities.
See this post for more information about this: http://forum.xda-developers.com/showthread.php?t=1642154
Try wotanserver's flashtool...
http://www.wotanserver.com/en/
Good luck
SysGhost said:
The red led blinking rapidly three times means the battery is "out of juice".
I've said it earlier: Several X10 devices have reached an age, where battery failures are fairly common due to charge cycles and/or age. Specially if one got it just after the launch.
Anyhow, what you can do, is let the device charge "blindly" for a while, and a while I mean for half an hour to a few hours. Then it should, out of the blue, jump into "active" charging (With the battery screen showing offline charging)
If this doesn't happen you might have to charge the battery externally.
...or even replace the battery.
-"Why?", one might ask.
Reason is that the flash mode only works with a charged battery.
If it empty, it won't engage the flash mode at all. Stupid design, yes, but that is how it is.
Worst thing is, that the battery does deplete/discharge while in flashing mode. That is why it's so important it's fully charged and fully working, before one engages in flashing activities.
See this post for more information about this: http://forum.xda-developers.com/showthread.php?t=1642154
Click to expand...
Click to collapse
Didn't work, i even use my friends battery to flash it and it didn't work
almomdegal said:
Didn't work, i even use my friends battery to flash it and it didn't work
Click to expand...
Click to collapse
Well, if the battery issue was fixed, and you're sure the battery is fully charged, then try this: (Quoting from my other post)
I've charged/replaced the battery, and are having trouble with starting up. Earlier flash failed. Now what?
Don't worry. It's pretty darn hard to truly brick this device. Even if the screen remains black, there's still hope.
Once that the battery issue has been dealt with, you can move on:
Download the latest Flashtool and the proper global firmware (FTF-file) for your device from here:
http://forum.xda-developers.com/show...ight=flashtool
1: Extract/Install the Flashtool to a folder of your liking.
2: Copy the ftf-file to the "firmware" folder in the Flashtool folder you just created above.
3: Start Flashtool. Click the Bolt icon (flash). A Window appear. There, choose "flashmode". Cllick OK.
4: A new window appears. In the list on the left, choose the Generic firmware you downloaded and copied into the "firmware" folder. Should have a similar name as the file itself. (Or manually open the ftf-file from the "..." icon on the top right.)
5: Hit "OK. Follow the instructions you get on the screen:
1 - Unplug the device.
2 - Power off the device. (Unplug and replug the battery to be sure it really off, and not stuck in black screen)
3 - Press the "back" putton, and hold it down while performing the next task.
4 - Plug the device into the computers USB.
Click to expand...
Click to collapse
Forced flashing should now start.
Click to expand...
Click to collapse
time to accept the fact that it is really brick
Hi @almomdegal,
if you try flash using another full charge batt n its not work, I think this forum is no longer works for u anymore.
I own a faulty X10 as well, random shut down (no warning at all) then wont boot n charge
reflash it, revive for few days and dead again, and reflash....
now it is really dead, no problem appears and it show flash successful and it just wont boot or charge but vibrate non stop
I just send the phone to service center and the board need to be replace
so its time to send to the real professional to solve it, coz this problem ain't software downloaded from internet can solve anymore
mooving said:
Hi @almomdegal,
if you try flash using another full charge batt n its not work, I think this forum is no longer works for u anymore.
I own a faulty X10 as well, random shut down (no warning at all) then wont boot n charge
reflash it, revive for few days and dead again, and reflash....
now it is really dead, no problem appears and it show flash successful and it just wont boot or charge but vibrate non stop
I just send the phone to service center and the board need to be replace
so its time to send to the real professional to solve it, coz this problem ain't software downloaded from internet can solve anymore
Click to expand...
Click to collapse
yeah i guess so.
I just needed this closure i'll send it to service today
This problem is already solved please ignore this and solution is below if someone is facing something similar. Thank You.
Let me tell you what exactly happened so you can tell me what is the exact problem.
Problem started when i changed my SIM card. After changing my SIM card my phone was always showing 100% battery and after a day or more sudden death of battery. Then i try to recharge it back by plugin the charger in phone off mode. First i thought my battery is OK just i have to wipe battery states and everything will be fine. So i did wipe of battery states like 100 times no change.
Then i thought may be i need to re install the OS so i did that but no change and i always noticed that every time when my goes off since it shows me 100% battery every time, my battery backup was less.
So i thought my battery is drains so fast, maybe there is some problem in my battery so i should replace it. But it tried my battery in my friend's neo V and it's working fine in his mobile showing right percentage and everything so now i want to put original GB firmware so i started installing the firmware but i think because of low battery installation process was stuck at 4% so finally i removed the cable while installation was still on now it is not even recharging in phone off mode when i connect cable to mobile (LED shows nothing). And now i can see red blinking LED when i connect cable. I think phone is all dead now.
So please guys help me what should i do ?
I solved this problem by putting battery out and in again i was able to enter into flashmode and i installed .62 firmware and finally its charging hopefully my battery is OK.
Buddy thatz kernel problem use any other kernel like lupus, suave or any other it will be fyn.. Problem is in night elf kernwl and alliance kernel so din worry ur phn battery all ok..!
Assuming uh have mt 11i (neo v)
Hi again,
I can't believe no one had the same issue before as I couldn't find any help via search
I used this guide to unbrick my phone and install LineageOS: https://forum.xda-developers.com/redmi-note-3/how-to/kate-guide-install-lineage-os-locked-t3546154
I flashed:
1) miui_HMNote3ProGlobal_7.7.6_Firmware.zip
2) lineage-14.1-20170719-nightly-kenzo-signed.zip
3) Usual GAPPS micro
Kernel: 3.10.105-lineageos
Problem:
On the lockscreen my phone shows the message "Charging (24 hours until full) - wtf?
It charged 13% in 4 hours which is very unusual.
How can I fix this?
Thanks for any help!
Edit: I could flash Radon 5.1 kernel, but I don't have root access to change the settings.
Edit2: I applied for official unlock again haha
Edit3: Permission has already been granted after 10 minutes o,O
Edit4: Bootloader unlocked - again.
Edit5: Rooted, and installed Radon 5.1 Kernel. Let's see what happens
Edit6: Charging was still ****, so I changed the cable. Much better charging rate now. (but isn't mine)
Edit7: Bought a new charger - still 10h until full charge. GEEZus christ.
Edit8: Battery percentage keeps going down even while charging lol...awesome!
Does anyone have a clue what is wrong with that phone?
Snooze4 said:
Does anyone have a clue what is wrong with that phone?
Click to expand...
Click to collapse
Charger n usb cable can be faulty check them out
mpschahal16 said:
Charger n usb cable can be faulty check them out
Click to expand...
Click to collapse
I bought a new one (as I mentioned), which works pretty well on my backup phone (Samsung S4), but when I plug it into the Xiaomi, it doesn't charge at all.
It's even going down when plugged.