I did the research read all the threads made. Xda Mi forums everything.
Tested Both of the Miui9 versions and now the Miui10 global beta.
For me
Pubg works fine. Although people are having issue with Pubg too. ( touch wise)
Now there are not one. but two touch issue with keyboard.
People tend to confuse in between both.
Scenario 1 - I am typing something the keyboard suddenly disappeares and phone take the multitouch as a swipe up hence takes to home. ( FULL SCREEN GESTURES ENABLED. )
So people giving temporary fix as disabling gestures this is what it is.
Scenario 2 - The order of the alphabets typed. If i type fast The order of the alphabets are not right .
Happened with all the 3 versions of the miui rom ( 2 of miui9 and 1 of miui10 )
Typing pr pr pr fastly shows up to be rp pr rp rp rp pr pr
and que que que que que que que ( this que issue is not here on miui10 but was uqe uqe que on miui9 )
So the order issue Exists to the right side of the display for alphabets like "p" and "l"
rp pr pr rp pr pr rp pr rp
rl lr lr lr lr rl lr lr lr lr
I tried scrolling instagram feed from the left side of the display
centre of the display and from the right side of the display
On Miui9 Centre one was faster and smoother while from left and right it was slower.
Now on Miui10
Left and Centre is fine
Right side is still slower.
So keyboard issues are basically these two
1- Multitouch
2- Touch Sensitivity on the right side of the display.
I request the poco team and the Miui Developers to kindly have a look and the people to confirm this bug..
Regards
Prateek Varshney
My unit is from China, purchased in Italy. I maked all possible tries, no problem for me. Poco works amazing, touch is perfect.
I really hope its not a hardware issue.
I would be pissed if they dont fix it in software and i have to refund it
bluedragon02 said:
I really hope its not a hardware issue.
I would be pissed if they dont fix it in software and i have to refund it
Click to expand...
Click to collapse
It's not hardware issue, just change long press duration to 170ms in keyboard setting, voila your problem will be solved.
P. S. Fixed this issue in both miui 9 & 10 by doing this.
-TheKoolAnie- said:
It's not hardware issue, just change long press duration to 170ms in keyboard setting, voila your problem will be solved.
P. S. Fixed this issue in both miui 9 & 10 by doing this.
Click to expand...
Click to collapse
wow just did it and it works better not sure if entirely solved through
-TheKoolAnie- said:
It's not hardware issue, just change long press duration to 170ms in keyboard setting, voila your problem will be solved.
P. S. Fixed this issue in both miui 9 & 10 by doing this.
Click to expand...
Click to collapse
It didn't fix the problem at all in my case.
---------- Post added at 12:10 PM ---------- Previous post was at 12:09 PM ----------
The thing i find worrying is that it doesn't happen to everyone and also it depends on the area on the screen, so it sounds more like hardware imo. Maybe they can help it with software but it's not even sure...
denzel09 said:
My unit is from China, purchased in Italy. I maked all possible tries, no problem for me. Poco works amazing, touch is perfect.
Click to expand...
Click to collapse
Lucky guy??*
bluedragon02 said:
I really hope its not a hardware issue.
I would be pissed if they dont fix it in software and i have to refund it
Click to expand...
Click to collapse
The refund period is over for me now ?.
I just have to hope it's a software issue.
-TheKoolAnie- said:
It's not hardware issue, just change long press duration to 170ms in keyboard setting, voila your problem will be solved.
P. S. Fixed this issue in both miui 9 & 10 by doing this.
Click to expand...
Click to collapse
Not solved completely but definitely feels a little better now.
So can it be said that it's not a hardware issue?
Tomatot- said:
It didn't fix the problem at all in my case.
---------- Post added at 12:10 PM ---------- Previous post was at 12:09 PM ----------
The thing i find worrying is that it doesn't happen to everyone and also it depends on the area on the screen, so it sounds more like hardware imo. Maybe they can help it with software but it's not even sure...
Click to expand...
Click to collapse
same concern
Related
Hi guys, I am looking for a KitKat ROM for OnePlus 2.
anyone knows about one?
Doesnt Exist Man.
why would need it anyway ?
Thnx god he didnt ask for gingerbread rom ...
Sent from my unknown using XDA-Developers mobile app
restlessgeek said:
Doesnt Exist Man.
why would need it anyway ?
Click to expand...
Click to collapse
because my home/fingerprint button is dead and i tryed everything, all the post, all the roms, even oneplus support and nothing...
miqueasgl said:
because my home/fingerprint button is dead and i tryed everything, all the post, all the roms, even oneplus support and nothing...
Click to expand...
Click to collapse
search threads people have posted solution for same.
anyway what made you thought KK would fix it :
restlessgeek said:
search threads people have posted solution for same.
anyway what made you thought KK would fix it :
Click to expand...
Click to collapse
Just testing all the odds, at this point... Nothing to lose.
How old are you... Curiosity
Sent from my unknown using XDA-Developers mobile app
lummujaj said:
How old are you... Curiosity
Sent from my unknown using XDA-Developers mobile app
Click to expand...
Click to collapse
31.... why?
miqueasgl said:
because my home/fingerprint button is dead and i tryed everything, all the post, all the roms, even oneplus support and nothing...
Click to expand...
Click to collapse
Get the front panel replaced...
Sent from my ONE A2003 using Tapatalk
Eclair and Froyo appreciated. I miss the days Android implemented JIT compiling
Sent from my ONE A2003 using Tapatalk
Those were the days ? not missing my LG Optimus 2X/P990 though, worked fine although the Nvidia Tegra 2 chipset rather quickly lost support from the maker ?
Back to the thread starters problem, most probably your finger sensor has been exposed to moisture which seems to be this phones Akilles heel, causing home button/fingerprint scanner to go up in smoke. Sometimes it fixes itself with time, and sometimes not. There's a lot of hocus pocus "fixes" for it because of that, going all the way back to KitKat which for sure does not support fingerprint scanner is one of the best. Luckily there's no KitKat or IceCreamSandwich for this phone ?
Proper solution is to replace the front/home button module and hope for the best that it's not as sensitive to moisture as the old module. And yes, this is a design failure from OnePlus, it should have been better protected from water/moisture since the button is easily exposed to both wet fingers and rain.
pitrus- said:
Those were the days ? not missing my LG Optimus 2X/P990 though, worked fine although the Nvidia Tegra 2 chipset rather quickly lost support from the maker ?
Back to the thread starters problem, most probably your finger sensor has been exposed to moisture which seems to be this phones Akilles heel, causing home button/fingerprint scanner to go up in smoke. Sometimes it fixes itself with time, and sometimes not. There's a lot of hocus pocus "fixes" for it because of that, going all the way back to KitKat which for sure does not support fingerprint scanner is one of the best. Luckily there's no KitKat or IceCreamSandwich for this phone ?
Proper solution is to replace the front/home button module and hope for the best that it's not as sensitive to moisture as the old module. And yes, this is a design failure from OnePlus, it should have been better protected from water/moisture since the button is easily exposed to both wet fingers and rain.
Click to expand...
Click to collapse
Same problem. I had wet hands. Not that much though. But I'm afraid if this comes under warranty or will they charge money for replacing?
EDIT - My home button is dead for a month now. Very much disappointed with my phone
Sent from my ONE A2003 using Tapatalk
LOL9988 said:
Same problem. I had wet hands. Not that much though. But I'm afraid if this comes under warranty or will they charge money for replacing?
EDIT - My home button is dead for a month now. Very much disappointed with my phone
Click to expand...
Click to collapse
I have the same issue! Mine stopped working 2 days ago.. I went to the B2X service center (Official OP support for India) and got the front panel replaced for no charge qnd took only 1 day..
You can also get it replaced quickly.. Just don't specifically mention any water damage!
---------- Post added at 01:36 PM ---------- Previous post was at 01:33 PM ----------
miqueasgl said:
Hi guys, I am looking for a KitKat ROM for OnePlus 2.
anyone knows about one?
Click to expand...
Click to collapse
No, AFAIK there are no KK roms for OP2 and even if there was, someone would have to implement FPS in that KK rom which would not be very easy to do..
Better go to your nearest service center and get the front panel replaced..
Impulse3710 said:
I have the same issue! Mine stopped working 2 days ago.. I went to the B2X service center (Official OP support for India) and got the front panel replaced for no charge qnd took only 1 day..
You can also get it replaced quickly.. Just don't specifically mention any water damage!
---------- Post added at 01:36 PM ---------- Previous post was at 01:33 PM ----------
No, AFAIK there are no KK roms for OP2 and even if there was, someone would have to implement FPS in that KK rom which would not be very easy to do..
Better go to your nearest service center and get the front panel replaced..
Click to expand...
Click to collapse
OK. I suppose I have to go to service center. Thanks for suggestion:good:
So I recently bought two Le Max 2 X829's from Banggood for $196 each and didn't find out about the fingerprint sensor problem until after... I haven't received them yet, but I would like to know what solutions have you guys been offered when you contact your sellers.
I haven't had any problems with Banggood or their customer service. When something I buy is defective, I just email them directly, with a description of the defect, pictures and a YouTube video too if possible, and I make sure to tell them that I have already troubleshooted, checked the forums, and tell them that the defect is common so that they don't give me the run around. They usually go straight to offering me replacement parts for free, or a partial refund if the device still "works" and can be fixed by me, or simply a return label if I insist that I want to return it.
Chime in...
Nothings, its too expenisve to send it back to China. I just resell them here in the Netherlands, you will easily get your money back.
its a software issue, if u change the rom it gonna work good!
if u want the stock the 23s Chinese ROM and 19s Indian ROM are the best....
but theres are more roms that can help you with that!
Read in the ROMs Forum!
sick707 said:
its a software issue, if u change the rom it gonna work good!
if u want the stock the 23s Chinese ROM and 19s Indian ROM are the best....
but theres are more roms that can help you with that!
Read in the ROMs Forum!
Click to expand...
Click to collapse
Dont respond if you dont know what you are talking about. Its a hardware issue!. Software can only fix it temporarily or kick it back into life sometimes.
MerlijnD said:
Dont respond if you dont know what you are talking about. Its a hardware issue!. Software can only fix it temporarily or kick it back into life sometimes.
Click to expand...
Click to collapse
Broo i went through the same issue and i moves to SmallEui by Aurel and its working perfect(sometime fails but normal) mi x829 came with 16s and it was a sh*** soon i flash the rom the fingerprint works better! Try that! (Month ago)
MerlijnD said:
Dont respond if you dont know what you are talking about. Its a hardware issue!. Software can only fix it temporarily or kick it back into life sometimes.
Click to expand...
Click to collapse
Why don't you just stop talking about things you don't know anything about!?! I guess you haven't read only one post in fingerprint issue thread. Otherwise you wouldn't write something like this.
Just search for my posts inside the main fingerprint issue thread to get yourself some information about what you are claiming to know.
Lizard82 said:
Why don't you just stop talking about things you don't know anything about!?! I guess you haven't read only one post in fingerprint issue thread. Otherwise you wouldn't write something like this.
Just search for my posts inside the main fingerprint issue thread to get yourself some information about what you are claiming to know.
Click to expand...
Click to collapse
I've read through several of the threads and it was a massive waste of time. The forum for the Le Max 2 is pretty disorganized, there's very little moderation, and no consensus can be drawn as far as solving the fingerprint sensor problem is concerned. Just a bunch of inexperienced people rambling and contradicting each other.
I have plenty of experience and two Le Max 2's on the way, so I'll draw up some tests and make an objective observation when I receive them.
With the unorganized and inexperienced points you are absolutely right. That's why I give up on explaining to many people how to solve the problem. Me and my girlfriend are both running Le Max 2 with madmax rom for long time now. In the beginning my device had a totally dead fingerprint scanner. After some research, trying few settings and stuff I was able to break it down to Qualcomm drivers/firmware.
In German board we were able to get most of the phones FP running again. (Experienced users phones).
Nearly all devices with Dead FP's are running on old couco 92 rom.
If you're facing issues after receiving the phones flash another room ( stock Chinese or custom based stock from the forum) and try to follow the instructions i wrote in the fingerprint section...
That's said, my girlfriend and I have the x820 version.
Give it a shot and you will see the point of the problem and how to solve it...
Lizard82 said:
With the unorganized and inexperienced points you are absolutely right. That's why I give up on explaining to many people how to solve the problem. Me and my girlfriend are both running Le Max 2 with madmax rom for long time now. In the beginning my device had a totally dead fingerprint scanner. After some research, trying few settings and stuff I was able to break it down to Qualcomm drivers/firmware.
In German board we were able to get most of the phones FP running again. (Experienced users phones).
Nearly all devices with Dead FP's are running on old couco 92 rom.
If you're facing issues after receiving the phones flash another room ( stock Chinese or custom based stock from the forum) and try to follow the instructions i wrote in the fingerprint section...
That's said, my girlfriend and I have the x820 version.
Give it a shot and you will see the point of the problem and how to solve it...
Click to expand...
Click to collapse
I have x829 and changing roms, modems, unbrick method, haven't worked in bringing FP back to life. So it may be mixed, in my case seems like hardware issue.
Read my posts... It's related to the Qualcomm drivers...
Lizard82 said:
Read my posts... It's related to the Qualcomm drivers...
Click to expand...
Click to collapse
No it isnt, ive had 4 le max 2. First thing i did is flash through qdloader mode, hell ive even soldered wires and flashed directly to the NAND ufs chip with a raspberry. So please dont think im talking bull****.
MerlijnD said:
No it isnt, ive had 4 le max 2. First thing i did is flash through qdloader mode, hell ive even soldered wires and flashed directly to the NAND ufs chip with a raspberry. So please dont think im talking bull****.
Click to expand...
Click to collapse
Your took it to another level!
I'll be interested to see videos of that
Peace out
---------- Post added at 04:38 AM ---------- Previous post was at 04:36 AM ----------
Lizard82 said:
With the unorganized and inexperienced points you are absolutely right. That's why I give up on explaining to many people how to solve the problem. Me and my girlfriend are both running Le Max 2 with madmax rom for long time now. In the beginning my device had a totally dead fingerprint scanner. After some research, trying few settings and stuff I was able to break it down to Qualcomm drivers/firmware.
In German board we were able to get most of the phones FP running again. (Experienced users phones).
Nearly all devices with Dead FP's are running on old couco 92 rom.
If you're facing issues after receiving the phones flash another room ( stock Chinese or custom based stock from the forum) and try to follow the instructions i wrote in the fingerprint section...
That's said, my girlfriend and I have the x820 version.
Give it a shot and you will see the point of the problem and how to solve it...
Click to expand...
Click to collapse
Does that Rom has English?
Also could you point me to this forum please.
Thx
Lizard82 said:
Read my posts... It's related to the Qualcomm drivers...
Click to expand...
Click to collapse
Nope, i tried that but fp still not working.
I flash several rom from 16s to 20s cn, 23s cn and 19s india, also 3 cusrom such rr. On each rom i tried to flash several modem firmware, 16s usa, 19s india, 23s cn and finaly latest dev version from yadi.sk/xxxxx..
So i guess you just lucky.. ?
On my case fp work only several hour since unboxing. Now it cant recognize any fp when i tried to register it. But the weird part is sometime it kinda work for taking pictures using camera. I said kinda because it works 50% of the time, when working i touch once but the camera is taking 4 or 5 pictures.
---------- Post added at 03:42 PM ---------- Previous post was at 03:31 PM ----------
Oh forgot, i bought this problematic x829 4/64 phone on banggood. I already mail them, they only offer me to resend it back and full refund. But that too expensive, i must pay for shipping back to china plus i already paid 60 usd for duty and tax when i got it.
Fyi i already bought several x820 and 1pcs x829 6/128 from aliexpress, all working great. another x829 6/128 coming this week from aliexpress, i hope it doesnt defective like this one.
It is HW related issue for sure,i tried all of fixes laying around,nothing help...X829 4/64 from banggood
if all probematic x829 came from banggod, let us join our voices and ask them to give us solution...
alveox said:
if all probematic x829 came from banggod, let us join our voices and ask them to give us solution...
Click to expand...
Click to collapse
Tinydeal... same thing here
haven't had fp before - so i don't rlly miss it
Gearbest
Enviado de meu Le X820 usando Tapatalk
I flashed the Indian 19s firmware last night and the finger print scanner is working back now, though it is a bit slow (not as fast as Redmi Note 3 ), but it works 100% of the times. The only thing abnormal I have done is that I have scanned my finger twice ( same finger).
Previously I tried all tricks with LOS and Mokee and could not get the Finger Print scanner to work.
hawamahal said:
I flashed the Indian 19s firmware last night and the finger print scanner is working back now, though it is a bit slow (not as fast as Redmi Note 3 ), but it works 100% of the times. The only thing abnormal I have done is that I have scanned my finger twice ( same finger).
Previously I tried all tricks with LOS and Mokee and could not get the Finger Print scanner to work.
Click to expand...
Click to collapse
what problem you have before? slow respond fp or unrecognized fp when adding new fingerprint?
alveox said:
what problem you have before? slow respond fp or unrecognized fp when adding new fingerprint?
Click to expand...
Click to collapse
The problem i had before was that the FP sensor did not respond when trying to unlock i.e. looks like it was OFF. Previously even if you left the finger on the sensor for 10 seconds i did not react at all. The only cases when the FP reader worked was immediately after locking. Also the sensor did not have any problem adding fingerprints.
Guys i really love this device !! But have any one faced the issue of laggy keyboard or is it just me this is a really annoying issue can anyone help me fix it
vichucoolics said:
Guys i really love this device !! But have any one faced the issue of laggy keyboard or is it just me this is a really annoying issue can anyone help me fix it
Click to expand...
Click to collapse
I'm using SwiftKey keyboard. I didn't face any issues. Been using it from 3 days
vichucoolics said:
Guys i really love this device !! But have any one faced the issue of laggy keyboard or is it just me this is a really annoying issue can anyone help me fix it
Click to expand...
Click to collapse
Stock keyboard lags on me too
On Gboard, no issues
rahulkamma14 said:
I'm using SwiftKey keyboard. I didn't face any issues. Been using it from 3 days
Click to expand...
Click to collapse
Tried both swiftkey and fleksy both are kind of laggy :/
I have the same bug and are some many people with this issue.
To test, try typing some words on the keyboard on the extreme of screen, like "que", it shows uqe or something else, the keyboard can't recognize fastly typing words.
I tried all the fixes posibles, used gboard and switft. The same problem.
valy17400 said:
I have the same bug and are some many people with this issue.
To test, try typing some words on the keyboard on the extreme of screen, like "que", it shows uqe or something else, the keyboard can't recognize fastly typing words.
I tried all the fixes posibles, used gboard and switft. The same problem.
Click to expand...
Click to collapse
Exactly thats the issue
But iam able to type que fast?
same problem. if the speed is fast it is unable to recognise which alphabet was pressed first.
Let's all report this! maybe the devs could fix this
It's soo annoying.
Same problem, if I try to type fast it felt slow down & left & right area of keyboard seems slow to me. PS : tired Gboard & SwiftKey
I had been writing about these issues but people have insulted me.
This is indeed a touch related problem, a lag in touch.
Since the touch digitizer responds to touches very late, fast typing confuses the device as to which letter was typed first. This is really funny that a device with SD845 is not even capable of recognizing what input came first.
This problem is also related to the multitouch issue.
shailendra1993 said:
I had been writing about these issues but people have insulted me.
This is indeed a touch related problem, a lag in touch.
Since the touch digitizer responds to touches very late, fast typing confuses the device as to which letter was typed first. This is really funny that a device with SD845 is not even capable of recognizing what input came first.
This problem is also related to the multitouch issue.
Click to expand...
Click to collapse
I dont feel so that its a hardware problem cuz whenever unopen a touch tester app and use two or three fingers simultaneously very fast there are no such issues it just comes with the keyboard may be itll be fixed in the next ota xiaomi has always been buggy in the first few weeks lets give some more time
-TheKoolAnie- said:
Same problem, if I try to type fast it felt slow down & left & right area of keyboard seems slow to me. PS : tired Gboard & SwiftKey
Click to expand...
Click to collapse
i was afraid my friend made fun of me to calm down and was telling me that i am overthinking the phone is fine. I thought i was the only one with this issue ?
and yes the right side of the keyboard is slower like words like "P" try to type PR it will show rp in high speeds.
Dont have this issue, currently running miui10 dev
No problem for me on gboard and "que" test. It's perfect. Also "pr" test is fine, passed!
denzel09 said:
No problem for me on gboard and "que" test. It's perfect. Also "pr" test is fine, passed!
Click to expand...
Click to collapse
What version of Miui are you running?
---------- Post added at 08:47 AM ---------- Previous post was at 08:46 AM ----------
ucup431951 said:
Dont have this issue, currently running miui10 dev
Click to expand...
Click to collapse
did you have this issue on miui9?
---------- Post added at 08:48 AM ---------- Previous post was at 08:47 AM ----------
vichucoolics said:
Guys i really love this device !! But have any one faced the issue of laggy keyboard or is it just me this is a really annoying issue can anyone help me fix it
Click to expand...
Click to collapse
I found a little way to make the keyboard better go to setting language and input gboard reduce the long press delay to 170ms. and I don't know how it gets better.
yoprateekyo said:
i was afraid my friend made fun of me to calm down and was telling me that i am overthinking the phone is fine. I thought i was the only one with this issue
and yes the right side of the keyboard is slower like words like "P" try to type PR it will show rp in high speeds.
Click to expand...
Click to collapse
Q&P?
Did you guys enable full screen gestures?
Try switch back to buttons? And see if the problem persists?
Make sure you guys disable slide three fingers down screenshot too
I think this gestures are causing some issues...
If I'm correct then disable full screen gestures should solve Q&P bug...
If the problem still persists then sorry.... Let's wait for the fix update...???
yoprateekyo said:
What version of Miui are you running?
---------- Post added at 08:47 AM ---------- Previous post was at 08:46 AM ----------
Click to expand...
Click to collapse
9.6.14.0
denzel09 said:
9.6.14.0
Click to expand...
Click to collapse
Mine got 9.16.18.0. Maybe it's a software bug then. That maybe solved after some update
---------- Post added at 08:54 AM ---------- Previous post was at 08:53 AM ----------
kirakiranome said:
Q&P?
Did you guys enable full screen gestures?
Try switch back to buttons? And see if the problem persists?
Make sure you guys disable slide three fingers down screenshot too
I think this gestures are causing some issues...
If I'm correct then disable full screen gestures should solve Q&P bug...
If the problem still persists then sorry.... Let's wait for the fix update...
Click to expand...
Click to collapse
tried. problem still persists thanks anyway.
yoprateekyo said:
Mine got 9.16.18.0. Maybe it's a software bug then. That maybe solved after some update
Click to expand...
Click to collapse
My Poco doesn't see this 9.16.18.0 update. Idk. Last in my case is 9.16.14.0
denzel09 said:
My Poco doesn't see this 9.16.18.0 update. Idk. Last in my case is 9.16.14.0
Click to expand...
Click to collapse
9.6.18 stopped due to bugs
Does anyone have the problem where scrolling isnsiepr fast and scrolling is also only nice when their finger in flat on the screen and morning an angle? When I use my left thumb, in an angle it sometimes doesn't scroll proeprly and instead moves very little. It's very annoying.
Yes i have this. It's caused by input lag very high on this Phone !
Yes its horrible..Can not understand that they sell it with such issues and call it master of speed.
Will send it Back in monday
LOL
another fake topic
Why Fake?
This is happening with me 2. Is it hardware issue? Or should I replace it?
Bad news http://en.miui.com/thread-3746297-1-1.html this smartphone is very bad !
I can use this phone through gloves.
I've kind of made the problem go away. Idk if it's a placebo and I've gotten used to it. But I'll end the thread and start another one to state what I've done. You can give me feedback there.
bronze900 said:
I've kind of made the problem go away. Idk if it's a placebo and I've gotten used to it. But I'll end the thread and start another one to state what I've done. You can give me feedback there.
Click to expand...
Click to collapse
I also have the exact problem. The phone suddenly stops responding to some of the touches be it tap or swipe. Then after sometime it responds to all of the touches. How did you fix it?
Sent from my POCO F1 using Tapatalk
dbzgoku said:
I also have the exact problem. The phone suddenly stops responding to some of the touches be it tap or swipe. Then after sometime it responds to all of the touches. How did you fix it?
Click to expand...
Click to collapse
I didn't have something that extreme. But it seems better for me after I turned off mi optimisation in the developers options. Also go to extra settings and pick authorisation. I turned everything off and left settings. I'm about to root my phone as it has been nearly 3 days. There should be a fix in the Mi forums somewherem
I think I made a right decision to buy the Honor Play Player Edition instead of Poco F1, lots of complaints everywhere!
motherninja said:
I think I made a right decision to buy the Honor Play Player Edition instead of Poco F1, lots of complaints everywhere!
Click to expand...
Click to collapse
Noob?
I'm a lucky noob... Sorry you got tricked by xiaomi...
yea too many bugs, i am facing this issue as well, touch is really bad, there are times( i may be wrong) but the screen responds even when i hover my finger on it, it has happened quite a few times now
motherninja said:
I'm a lucky noob... Sorry you got tricked by xiaomi...
Click to expand...
Click to collapse
Ermmm maybe you got trick by honor cheating benchmarks
motherninja said:
I think I made a right decision to buy the Honor Play Player Edition instead of Poco F1, lots of complaints everywhere!
Click to expand...
Click to collapse
LOL I have the global version here in Italy and the phone is PERFECT. No one complaints about it. You can check. It's a great phone. Here are all happy about Poco.
nISTHUR said:
yea too many bugs, i am facing this issue as well, touch is really bad, there are times( i may be wrong) but the screen responds even when i hover my finger on it, it has happened quite a few times now
Click to expand...
Click to collapse
Yes. For me it's a functionality rather than a bug. It allows me to use the screen even with gloves on. Also the response will normalise if you install a tempered glass.
lockhrt999 said:
Yes. For me it's a functionality rather than a bug. It allows me to use the screen even with gloves on. Also the response will normalise if you install a tempered glass.
Click to expand...
Click to collapse
I installed tempered glass from the 1st day and getting touch issues. I thought it is software bug. Like, if I swipe left or right and it works as swipe up or down.
Mi post about their miui 10 beta 2, their is written that ghost and multi touch problem will be solved. If miui beta 2 solved these issues then I will install it manually. https://en.miui.com/thread-3935216-1-1.html
I post about the touch issues to poco India in twitter and they replied me to DM to us with contact number and miui version of my device, our team will call you.
Lets see, will they call or not.
maxmog said:
Yes its horrible..Can not understand that they sell it with such issues and call it master of speed.
Will send it Back in monday
Click to expand...
Click to collapse
Try miui 10 it doesn't need anything
Not even a bootloader unlocking just download and flash
Hello !
I have a problem with my redmi note 3
already the service of xiaomi (just for question, I do not have right to the SAV) do not know my version of telephone, via the IMEI they told me that it is the redmi note 3 of base
out, it is 152mm so that is normal is not correct because only pro and kate / SE are 152 mm ....
so I follow in the impossibility of knowing the version of the tel (bought of occas in the passage y'a longtemp)
I ordered a 152 mm screen on aliEx .... but it does not work
after exchanging text with the seller, he tells me first that I did not order the right, but then, after photo he told me that if it's good in fact and wonder what the problem is
it has not changed, the screen does not start, but it puts me in doubt about the version of the phone .....
hence my request here
what is my real version, and which screen should I choose?
here is the screen, the one received on the right to something more, but otherwise it's the same
sry can't send url
the 152 mm
sry can't send the url again
the link or I order the screen :
sry can't send url again2
and I just recommended another to another seller:
sry can't send url 3
thank you if someone can enlighten me more ..... I admit to be a little lost
it is 4 times that I disassemble, my old screen works well but is cracked, and I was to see 2 smartphone repairer who did not want to touch it because xiaomi and they did not know too much!
it's their job normally but hey, even me who have never done that, I dismount it up 4 times .....
sry my english, i'm french and use google traduction :crying:
marcovel said:
Hello !
I have a problem with my redmi note 3
already the service of xiaomi (just for question, I do not have right to the SAV) do not know my version of telephone, via the IMEI they told me that it is the redmi note 3 of base
out, it is 152mm so that is normal is not correct because only pro and kate / SE are 152 mm ....
so I follow in the impossibility of knowing the version of the tel (bought of occas in the passage y'a longtemp)
I ordered a 152 mm screen on aliEx .... but it does not work
after exchanging text with the seller, he tells me first that I did not order the right, but then, after photo he told me that if it's good in fact and wonder what the problem is
it has not changed, the screen does not start, but it puts me in doubt about the version of the phone .....
hence my request here
what is my real version, and which screen should I choose?
here is the screen, the one received on the right to something more, but otherwise it's the same
sry can't send url
the 152 mm
sry can't send the url again
the link or I order the screen :
sry can't send url again2
and I just recommended another to another seller:
sry can't send url 3
thank you if someone can enlighten me more ..... I admit to be a little lost
it is 4 times that I disassemble, my old screen works well but is cracked, and I was to see 2 smartphone repairer who did not want to touch it because xiaomi and they did not know too much!
it's their job normally but hey, even me who have never done that, I dismount it up 4 times .....
sry my english, i'm french and use google traduction :crying:
Click to expand...
Click to collapse
Kenzo is 150 and Kate is 152.5. May be seller sent u kenzo screen.
i have a problem after change screen. stop working well proximity sensor... is it any way to make it more sensible?
naik2902 said:
Kenzo is 150 and Kate is 152.5. May be seller sent u kenzo screen.
Click to expand...
Click to collapse
hello no the 2 screen are same ( 152 mmm )
marianoasis said:
i have a problem after change screen. stop working well proximity sensor... is it any way to make it more sensible?
Click to expand...
Click to collapse
While installing the Screen should be properly aligned with proximity . little miss alignment can block proximity.
---------- Post added at 02:50 AM ---------- Previous post was at 02:49 AM ----------
marcovel said:
hello no the 2 screen are same ( 152 mmm )
Click to expand...
Click to collapse
Upload screenshot
naik2902 said:
While installing the Screen should be properly aligned with proximity . little miss alignment can block proximity.
---------- Post added at 02:50 AM ---------- Previous post was at 02:49 AM ----------
Upload screenshot
Click to expand...
Click to collapse
what i can do? break screen?
marianoasis said:
what i can do? break screen?
Click to expand...
Click to collapse
Install sensor app from playstore. And test ur proximity.
naik2902 said:
Install sensor app from playstore. And test ur proximity.
Click to expand...
Click to collapse
yes, i did it... only if i use my sleeve... or a paper...
marianoasis said:
yes, i did it... only if i use my sleeve... or a paper...
Click to expand...
Click to collapse
Then good. Ur proximity is good and working fine.
naik2902 said:
Then good. Ur proximity is good and working fine.
Click to expand...
Click to collapse
but no in my ear... wont work... is it any way to make it more sensible... extra sensible?
marianoasis said:
but no in my ear... wont work... is it any way to make it more sensible... extra sensible?
Click to expand...
Click to collapse
May be ur head is transparent. Brain is hollow the reason why sensor cant detect it properly. :laugh::silly:
Try diffrent rom and check. Or flash latest firmware.
naik2902 said:
May be ur head is transparent. Brain is hollow the reason why sensor cant detect it properly. :laugh::silly:
Try diffrent rom and check. Or flash latest firmware.
Click to expand...
Click to collapse
you're right... its rare... im thinking its not original screen...
naik2902 said:
While installing the Screen should be properly aligned with proximity . little miss alignment can block proximity.
---------- Post added at 02:50 AM ---------- Previous post was at 02:49 AM ----------
Upload screenshot
Click to expand...
Click to collapse
Hello
my phone is a good
redmi note 3 pro kate version full 4g
the seller had tried to make me doubt, but I received another screen of another seller, it lit up well but he wrote all alone ....
see the video youtube titled:
redmi ghost touch (ecran fou)
I asked for a refund for this screen, but the first is too late, the time I seek to understand the redmi version which the seller had put me in doubt, the 14 days of claim was exceeded!
I do not know how to order a screen now, because it's been twice that I receive screens of poor quality
1 not step
1 that works badly
and i can't upload picture, i'm new member
sry my english again, google trad, i 'm french