Hello !
I have a problem with my redmi note 3
already the service of xiaomi (just for question, I do not have right to the SAV) do not know my version of telephone, via the IMEI they told me that it is the redmi note 3 of base
out, it is 152mm so that is normal is not correct because only pro and kate / SE are 152 mm ....
so I follow in the impossibility of knowing the version of the tel (bought of occas in the passage y'a longtemp)
I ordered a 152 mm screen on aliEx .... but it does not work
after exchanging text with the seller, he tells me first that I did not order the right, but then, after photo he told me that if it's good in fact and wonder what the problem is
it has not changed, the screen does not start, but it puts me in doubt about the version of the phone .....
hence my request here
what is my real version, and which screen should I choose?
here is the screen, the one received on the right to something more, but otherwise it's the same
sry can't send url
the 152 mm
sry can't send the url again
the link or I order the screen :
sry can't send url again2
and I just recommended another to another seller:
sry can't send url 3
thank you if someone can enlighten me more ..... I admit to be a little lost
it is 4 times that I disassemble, my old screen works well but is cracked, and I was to see 2 smartphone repairer who did not want to touch it because xiaomi and they did not know too much!
it's their job normally but hey, even me who have never done that, I dismount it up 4 times .....
sry my english, i'm french and use google traduction :crying:
marcovel said:
Hello !
I have a problem with my redmi note 3
already the service of xiaomi (just for question, I do not have right to the SAV) do not know my version of telephone, via the IMEI they told me that it is the redmi note 3 of base
out, it is 152mm so that is normal is not correct because only pro and kate / SE are 152 mm ....
so I follow in the impossibility of knowing the version of the tel (bought of occas in the passage y'a longtemp)
I ordered a 152 mm screen on aliEx .... but it does not work
after exchanging text with the seller, he tells me first that I did not order the right, but then, after photo he told me that if it's good in fact and wonder what the problem is
it has not changed, the screen does not start, but it puts me in doubt about the version of the phone .....
hence my request here
what is my real version, and which screen should I choose?
here is the screen, the one received on the right to something more, but otherwise it's the same
sry can't send url
the 152 mm
sry can't send the url again
the link or I order the screen :
sry can't send url again2
and I just recommended another to another seller:
sry can't send url 3
thank you if someone can enlighten me more ..... I admit to be a little lost
it is 4 times that I disassemble, my old screen works well but is cracked, and I was to see 2 smartphone repairer who did not want to touch it because xiaomi and they did not know too much!
it's their job normally but hey, even me who have never done that, I dismount it up 4 times .....
sry my english, i'm french and use google traduction :crying:
Click to expand...
Click to collapse
Kenzo is 150 and Kate is 152.5. May be seller sent u kenzo screen.
i have a problem after change screen. stop working well proximity sensor... is it any way to make it more sensible?
naik2902 said:
Kenzo is 150 and Kate is 152.5. May be seller sent u kenzo screen.
Click to expand...
Click to collapse
hello no the 2 screen are same ( 152 mmm )
marianoasis said:
i have a problem after change screen. stop working well proximity sensor... is it any way to make it more sensible?
Click to expand...
Click to collapse
While installing the Screen should be properly aligned with proximity . little miss alignment can block proximity.
---------- Post added at 02:50 AM ---------- Previous post was at 02:49 AM ----------
marcovel said:
hello no the 2 screen are same ( 152 mmm )
Click to expand...
Click to collapse
Upload screenshot
naik2902 said:
While installing the Screen should be properly aligned with proximity . little miss alignment can block proximity.
---------- Post added at 02:50 AM ---------- Previous post was at 02:49 AM ----------
Upload screenshot
Click to expand...
Click to collapse
what i can do? break screen?
marianoasis said:
what i can do? break screen?
Click to expand...
Click to collapse
Install sensor app from playstore. And test ur proximity.
naik2902 said:
Install sensor app from playstore. And test ur proximity.
Click to expand...
Click to collapse
yes, i did it... only if i use my sleeve... or a paper...
marianoasis said:
yes, i did it... only if i use my sleeve... or a paper...
Click to expand...
Click to collapse
Then good. Ur proximity is good and working fine.
naik2902 said:
Then good. Ur proximity is good and working fine.
Click to expand...
Click to collapse
but no in my ear... wont work... is it any way to make it more sensible... extra sensible?
marianoasis said:
but no in my ear... wont work... is it any way to make it more sensible... extra sensible?
Click to expand...
Click to collapse
May be ur head is transparent. Brain is hollow the reason why sensor cant detect it properly. :laugh::silly:
Try diffrent rom and check. Or flash latest firmware.
naik2902 said:
May be ur head is transparent. Brain is hollow the reason why sensor cant detect it properly. :laugh::silly:
Try diffrent rom and check. Or flash latest firmware.
Click to expand...
Click to collapse
you're right... its rare... im thinking its not original screen...
naik2902 said:
While installing the Screen should be properly aligned with proximity . little miss alignment can block proximity.
---------- Post added at 02:50 AM ---------- Previous post was at 02:49 AM ----------
Upload screenshot
Click to expand...
Click to collapse
Hello
my phone is a good
redmi note 3 pro kate version full 4g
the seller had tried to make me doubt, but I received another screen of another seller, it lit up well but he wrote all alone ....
see the video youtube titled:
redmi ghost touch (ecran fou)
I asked for a refund for this screen, but the first is too late, the time I seek to understand the redmi version which the seller had put me in doubt, the 14 days of claim was exceeded!
I do not know how to order a screen now, because it's been twice that I receive screens of poor quality
1 not step
1 that works badly
and i can't upload picture, i'm new member
sry my english again, google trad, i 'm french
Related
My sony live with walkman screen went really dim and then blank . I did a hard reboot by removing and re-installing the battery. The phone comes back on but the screen is blank. I can swipe and feel the vibration you get from unlocking the phone but still just a black screen. The bottome keys are also lit up...if i press them i can feel the vibration...evn i cn recive a call talk do every think..only problem nothing is visible on screen just a blank black scree.....
I tried reinstalling android 4.0 again with pc companion..after reinstalling android it works fine for 1 or 2 days and after it again the same problem starts....
please help me.....
Thanks!
If I were you I would claim warranty (on locked bootloader/unrooted)
my phone has exactly the same problem as yours, unfortunately all things including flash stock rom, unbricking using .ftf on the first aid thread, change kernel, none of those work
Have you tried using SUS(Sony Update Service? It's a really awesome program. Google it.
Sent from my iPod touch using Tapatalk
Ya evn tried it
AsadAbrar said:
Have you tried using SUS(Sony Update Service? It's a really awesome program. Google it.
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
ya even tried it bt no use...
thanks 4 informing me...
Fariqussalam said:
my phone has exactly the same problem as yours, unfortunately all things including flash stock rom, unbricking using .ftf on the first aid thread, change kernel, none of those work
Click to expand...
Click to collapse
so wat hav u dnt...is it still in same situation???blank screen...n thanks i tot i ws nly 1 getting dis prob...atleast i hav a company....
kuramsai said:
so wat hav u dnt...is it still in same situation???blank screen...n thanks i tot i ws nly 1 getting dis prob...atleast i hav a company....
Click to expand...
Click to collapse
well in my case it's not actually a really blank screen, the screen is pretty dark it look likes it showing nothing but when you put it next to a very bright light like lamp, you could see that the phone is actually on and showing the lockscreen. i have try almost everything, Using SUS, Flashtool, changing kernel, i even relock my bootloaer, but still same. in the thread i make they told me that it is a hardware failure, i guess it is true, maybe due to overheating issue because after i google it some xperia ray user encounter the same problem, and what scares me that some of the user say that what broken is the motherboard, so there is no hope for the phone, but after i do some deep research, there still some little hope by changing the LCD, but the sparepart is still shipped. i hope after i change the LCD everything would be fine, since i have void the warranty, but if you still have your warranty, claim it, maybe you can get a clean new phone :good:
.
well in my case it's not actually a really blank screen, the screen is pretty dark it look likes it showing nothing but when you put it next to a very bright light like lamp, you could see that the phone is actually on and showing the lockscreen. i have try almost everything, Using SUS, Flashtool, changing kernel, i even relock my bootloaer, but still same. in the thread i make they told me that it is a hardware failure, i guess it is true, maybe due to overheating issue because after i google it some xperia ray user encounter the same problem, and what scares me that some of the user say that what broken is the motherboard, so there is no hope for the phone, but after i do some deep research, there still some little hope by changing the LCD, but the sparepart is still shipped. i hope after i change the LCD everything would be fine, since i have void the warranty, but if you still have your warranty, claim it, maybe you can get a clean new phone
Click to expand...
Click to collapse
ya today i gave it in sony service center....letz wait 4 da results..representative told me that the screen may b broken...he said he l inform me wether it cums under warrenty or not...
i am also facing the same problem
i am also facing the same problem on my xperia mini st15i.... i thought it was my sd card problem, i changed my sd and bought new class 10 but sometime it creates and i have to face this problem ...... i dont know how to fix this problem....??
no luck man, i already take the phone to the shop to change the LCD, the result is still same, the screen is still pretty dark, i don't know what else to do....
Fariqussalam said:
no luck man, i already take the phone to the shop to change the LCD, the result is still same, the screen is still pretty dark, i don't know what else to do....
Click to expand...
Click to collapse
i gave it in snoy service center...he sent the phone to get replaced...he said me that it will take 10-15 wroking dayz n ur phone l b replaced....if u have warrenty just get it replaced....
Claim warrenty if u hav....
khaaawaja said:
i am also facing the same problem on my xperia mini st15i.... i thought it was my sd card problem, i changed my sd and bought new class 10 but sometime it creates and i have to face this problem ...... i dont know how to fix this problem....??
Click to expand...
Click to collapse
best way is to claim warrenty if u have...or jst pay n get it repaired it in sony erricson service center...,ntng else we cn do...
kuramsai said:
ya even tried it bt no use...
Click to expand...
Click to collapse
Give it for warranty, then.
Sent from my iPod Touch using Tapatalk
AsadAbrar said:
Give it for warranty, then.
Sent from my iPod Touch using Tapatalk
Click to expand...
Click to collapse
ya..hav dne dat n l get phone replaced...
kuramsai said:
ya..hav dne dat n l get phone replaced...
Click to expand...
Click to collapse
Cool. Enjoy your new phone then.
Sent from my iPod Touch using Tapatalk
Fariqussalam said:
no luck man, i already take the phone to the shop to change the LCD, the result is still same, the screen is still pretty dark, i don't know what else to do....
Click to expand...
Click to collapse
I also have the same problem but i fixed it. The problem is in the software itself and not the LCD Screen. I observed something At first when you install the software it works fine, but after you charge it on the first time, the problem occurs. I was using Real ICS r6 and also i have this problem in my xperia mini pro but i observed that the problem was in the software. the developer himself did something wrong he replaced the mini pro system with lww so i corrected it and it worked for me. so if you are using a custom rom, just contact the developer to fix it for you. HOPE I helped you.
Hussein El Feky said:
I also have the same problem but i fixed it. The problem is in the software itself and not the LCD Screen. I observed something At first when you install the software it works fine, but after you charge it on the first time, the problem occurs. I was using Real ICS r6 and also i have this problem in my xperia mini pro but i observed that the problem was in the software. the developer himself did something wrong he replaced the mini pro system with lww so i corrected it and it worked for me. so if you are using a custom rom, just contact the developer to fix it for you. HOPE I helped you.
Click to expand...
Click to collapse
even after flashing stock and relock the bootloader it still same, i even use both SUS and PCC to repair the software, everything still same. by the way how do you fix it ?
---------- Post added at 06:15 AM ---------- Previous post was at 06:11 AM ----------
kuramsai said:
i gave it in snoy service center...he sent the phone to get replaced...he said me that it will take 10-15 wroking dayz n ur phone l b replaced....if u have warrenty just get it replaced....
Click to expand...
Click to collapse
that's the problem, i don't have my warranty anymore, but it's awesome for you to have those phone replaced ::good:
Fariqussalam said:
even after flashing stock and relock the bootloader it still same, i even use both SUS and PCC to repair the software, everything still same. by the way how do you fix it ?
---------- Post added at 06:15 AM ---------- Previous post was at 06:11 AM ----------
that's the problem, i don't have my warranty anymore, but it's awesome for you to have those phone replaced ::good:
Click to expand...
Click to collapse
dont worry!!give it in service center...i hope it doesnt cost more to get it repaired...
Fariqussalam said:
even after flashing stock and relock the bootloader it still same, i even use both SUS and PCC to repair the software, everything still same. by the way how do you fix it ?
---------- Post added at 06:15 AM ---------- Previous post was at 06:11 AM ----------
that's the problem, i don't have my warranty anymore, but it's awesome for you to have those phone replaced ::good:
Click to expand...
Click to collapse
What is your phone??
Hussein El Feky said:
What is your phone??
Click to expand...
Click to collapse
Live with walkman, so you contact the dev that relesed the ROM and he give the fix for you?
---------- Post added at 10:54 PM ---------- Previous post was at 10:47 PM ----------
kuramsai said:
dont worry!!give it in service center...i hope it doesnt cost more to get it repaired...
Click to expand...
Click to collapse
well sadly they ask me to wait for 2 months to fix the phone, maybe i will save some money and buy another Xperia
Hi guys, I am looking for a KitKat ROM for OnePlus 2.
anyone knows about one?
Doesnt Exist Man.
why would need it anyway ?
Thnx god he didnt ask for gingerbread rom ...
Sent from my unknown using XDA-Developers mobile app
restlessgeek said:
Doesnt Exist Man.
why would need it anyway ?
Click to expand...
Click to collapse
because my home/fingerprint button is dead and i tryed everything, all the post, all the roms, even oneplus support and nothing...
miqueasgl said:
because my home/fingerprint button is dead and i tryed everything, all the post, all the roms, even oneplus support and nothing...
Click to expand...
Click to collapse
search threads people have posted solution for same.
anyway what made you thought KK would fix it :
restlessgeek said:
search threads people have posted solution for same.
anyway what made you thought KK would fix it :
Click to expand...
Click to collapse
Just testing all the odds, at this point... Nothing to lose.
How old are you... Curiosity
Sent from my unknown using XDA-Developers mobile app
lummujaj said:
How old are you... Curiosity
Sent from my unknown using XDA-Developers mobile app
Click to expand...
Click to collapse
31.... why?
miqueasgl said:
because my home/fingerprint button is dead and i tryed everything, all the post, all the roms, even oneplus support and nothing...
Click to expand...
Click to collapse
Get the front panel replaced...
Sent from my ONE A2003 using Tapatalk
Eclair and Froyo appreciated. I miss the days Android implemented JIT compiling
Sent from my ONE A2003 using Tapatalk
Those were the days ? not missing my LG Optimus 2X/P990 though, worked fine although the Nvidia Tegra 2 chipset rather quickly lost support from the maker ?
Back to the thread starters problem, most probably your finger sensor has been exposed to moisture which seems to be this phones Akilles heel, causing home button/fingerprint scanner to go up in smoke. Sometimes it fixes itself with time, and sometimes not. There's a lot of hocus pocus "fixes" for it because of that, going all the way back to KitKat which for sure does not support fingerprint scanner is one of the best. Luckily there's no KitKat or IceCreamSandwich for this phone ?
Proper solution is to replace the front/home button module and hope for the best that it's not as sensitive to moisture as the old module. And yes, this is a design failure from OnePlus, it should have been better protected from water/moisture since the button is easily exposed to both wet fingers and rain.
pitrus- said:
Those were the days ? not missing my LG Optimus 2X/P990 though, worked fine although the Nvidia Tegra 2 chipset rather quickly lost support from the maker ?
Back to the thread starters problem, most probably your finger sensor has been exposed to moisture which seems to be this phones Akilles heel, causing home button/fingerprint scanner to go up in smoke. Sometimes it fixes itself with time, and sometimes not. There's a lot of hocus pocus "fixes" for it because of that, going all the way back to KitKat which for sure does not support fingerprint scanner is one of the best. Luckily there's no KitKat or IceCreamSandwich for this phone ?
Proper solution is to replace the front/home button module and hope for the best that it's not as sensitive to moisture as the old module. And yes, this is a design failure from OnePlus, it should have been better protected from water/moisture since the button is easily exposed to both wet fingers and rain.
Click to expand...
Click to collapse
Same problem. I had wet hands. Not that much though. But I'm afraid if this comes under warranty or will they charge money for replacing?
EDIT - My home button is dead for a month now. Very much disappointed with my phone
Sent from my ONE A2003 using Tapatalk
LOL9988 said:
Same problem. I had wet hands. Not that much though. But I'm afraid if this comes under warranty or will they charge money for replacing?
EDIT - My home button is dead for a month now. Very much disappointed with my phone
Click to expand...
Click to collapse
I have the same issue! Mine stopped working 2 days ago.. I went to the B2X service center (Official OP support for India) and got the front panel replaced for no charge qnd took only 1 day..
You can also get it replaced quickly.. Just don't specifically mention any water damage!
---------- Post added at 01:36 PM ---------- Previous post was at 01:33 PM ----------
miqueasgl said:
Hi guys, I am looking for a KitKat ROM for OnePlus 2.
anyone knows about one?
Click to expand...
Click to collapse
No, AFAIK there are no KK roms for OP2 and even if there was, someone would have to implement FPS in that KK rom which would not be very easy to do..
Better go to your nearest service center and get the front panel replaced..
Impulse3710 said:
I have the same issue! Mine stopped working 2 days ago.. I went to the B2X service center (Official OP support for India) and got the front panel replaced for no charge qnd took only 1 day..
You can also get it replaced quickly.. Just don't specifically mention any water damage!
---------- Post added at 01:36 PM ---------- Previous post was at 01:33 PM ----------
No, AFAIK there are no KK roms for OP2 and even if there was, someone would have to implement FPS in that KK rom which would not be very easy to do..
Better go to your nearest service center and get the front panel replaced..
Click to expand...
Click to collapse
OK. I suppose I have to go to service center. Thanks for suggestion:good:
So I recently bought two Le Max 2 X829's from Banggood for $196 each and didn't find out about the fingerprint sensor problem until after... I haven't received them yet, but I would like to know what solutions have you guys been offered when you contact your sellers.
I haven't had any problems with Banggood or their customer service. When something I buy is defective, I just email them directly, with a description of the defect, pictures and a YouTube video too if possible, and I make sure to tell them that I have already troubleshooted, checked the forums, and tell them that the defect is common so that they don't give me the run around. They usually go straight to offering me replacement parts for free, or a partial refund if the device still "works" and can be fixed by me, or simply a return label if I insist that I want to return it.
Chime in...
Nothings, its too expenisve to send it back to China. I just resell them here in the Netherlands, you will easily get your money back.
its a software issue, if u change the rom it gonna work good!
if u want the stock the 23s Chinese ROM and 19s Indian ROM are the best....
but theres are more roms that can help you with that!
Read in the ROMs Forum!
sick707 said:
its a software issue, if u change the rom it gonna work good!
if u want the stock the 23s Chinese ROM and 19s Indian ROM are the best....
but theres are more roms that can help you with that!
Read in the ROMs Forum!
Click to expand...
Click to collapse
Dont respond if you dont know what you are talking about. Its a hardware issue!. Software can only fix it temporarily or kick it back into life sometimes.
MerlijnD said:
Dont respond if you dont know what you are talking about. Its a hardware issue!. Software can only fix it temporarily or kick it back into life sometimes.
Click to expand...
Click to collapse
Broo i went through the same issue and i moves to SmallEui by Aurel and its working perfect(sometime fails but normal) mi x829 came with 16s and it was a sh*** soon i flash the rom the fingerprint works better! Try that! (Month ago)
MerlijnD said:
Dont respond if you dont know what you are talking about. Its a hardware issue!. Software can only fix it temporarily or kick it back into life sometimes.
Click to expand...
Click to collapse
Why don't you just stop talking about things you don't know anything about!?! I guess you haven't read only one post in fingerprint issue thread. Otherwise you wouldn't write something like this.
Just search for my posts inside the main fingerprint issue thread to get yourself some information about what you are claiming to know.
Lizard82 said:
Why don't you just stop talking about things you don't know anything about!?! I guess you haven't read only one post in fingerprint issue thread. Otherwise you wouldn't write something like this.
Just search for my posts inside the main fingerprint issue thread to get yourself some information about what you are claiming to know.
Click to expand...
Click to collapse
I've read through several of the threads and it was a massive waste of time. The forum for the Le Max 2 is pretty disorganized, there's very little moderation, and no consensus can be drawn as far as solving the fingerprint sensor problem is concerned. Just a bunch of inexperienced people rambling and contradicting each other.
I have plenty of experience and two Le Max 2's on the way, so I'll draw up some tests and make an objective observation when I receive them.
With the unorganized and inexperienced points you are absolutely right. That's why I give up on explaining to many people how to solve the problem. Me and my girlfriend are both running Le Max 2 with madmax rom for long time now. In the beginning my device had a totally dead fingerprint scanner. After some research, trying few settings and stuff I was able to break it down to Qualcomm drivers/firmware.
In German board we were able to get most of the phones FP running again. (Experienced users phones).
Nearly all devices with Dead FP's are running on old couco 92 rom.
If you're facing issues after receiving the phones flash another room ( stock Chinese or custom based stock from the forum) and try to follow the instructions i wrote in the fingerprint section...
That's said, my girlfriend and I have the x820 version.
Give it a shot and you will see the point of the problem and how to solve it...
Lizard82 said:
With the unorganized and inexperienced points you are absolutely right. That's why I give up on explaining to many people how to solve the problem. Me and my girlfriend are both running Le Max 2 with madmax rom for long time now. In the beginning my device had a totally dead fingerprint scanner. After some research, trying few settings and stuff I was able to break it down to Qualcomm drivers/firmware.
In German board we were able to get most of the phones FP running again. (Experienced users phones).
Nearly all devices with Dead FP's are running on old couco 92 rom.
If you're facing issues after receiving the phones flash another room ( stock Chinese or custom based stock from the forum) and try to follow the instructions i wrote in the fingerprint section...
That's said, my girlfriend and I have the x820 version.
Give it a shot and you will see the point of the problem and how to solve it...
Click to expand...
Click to collapse
I have x829 and changing roms, modems, unbrick method, haven't worked in bringing FP back to life. So it may be mixed, in my case seems like hardware issue.
Read my posts... It's related to the Qualcomm drivers...
Lizard82 said:
Read my posts... It's related to the Qualcomm drivers...
Click to expand...
Click to collapse
No it isnt, ive had 4 le max 2. First thing i did is flash through qdloader mode, hell ive even soldered wires and flashed directly to the NAND ufs chip with a raspberry. So please dont think im talking bull****.
MerlijnD said:
No it isnt, ive had 4 le max 2. First thing i did is flash through qdloader mode, hell ive even soldered wires and flashed directly to the NAND ufs chip with a raspberry. So please dont think im talking bull****.
Click to expand...
Click to collapse
Your took it to another level!
I'll be interested to see videos of that
Peace out
---------- Post added at 04:38 AM ---------- Previous post was at 04:36 AM ----------
Lizard82 said:
With the unorganized and inexperienced points you are absolutely right. That's why I give up on explaining to many people how to solve the problem. Me and my girlfriend are both running Le Max 2 with madmax rom for long time now. In the beginning my device had a totally dead fingerprint scanner. After some research, trying few settings and stuff I was able to break it down to Qualcomm drivers/firmware.
In German board we were able to get most of the phones FP running again. (Experienced users phones).
Nearly all devices with Dead FP's are running on old couco 92 rom.
If you're facing issues after receiving the phones flash another room ( stock Chinese or custom based stock from the forum) and try to follow the instructions i wrote in the fingerprint section...
That's said, my girlfriend and I have the x820 version.
Give it a shot and you will see the point of the problem and how to solve it...
Click to expand...
Click to collapse
Does that Rom has English?
Also could you point me to this forum please.
Thx
Lizard82 said:
Read my posts... It's related to the Qualcomm drivers...
Click to expand...
Click to collapse
Nope, i tried that but fp still not working.
I flash several rom from 16s to 20s cn, 23s cn and 19s india, also 3 cusrom such rr. On each rom i tried to flash several modem firmware, 16s usa, 19s india, 23s cn and finaly latest dev version from yadi.sk/xxxxx..
So i guess you just lucky.. ?
On my case fp work only several hour since unboxing. Now it cant recognize any fp when i tried to register it. But the weird part is sometime it kinda work for taking pictures using camera. I said kinda because it works 50% of the time, when working i touch once but the camera is taking 4 or 5 pictures.
---------- Post added at 03:42 PM ---------- Previous post was at 03:31 PM ----------
Oh forgot, i bought this problematic x829 4/64 phone on banggood. I already mail them, they only offer me to resend it back and full refund. But that too expensive, i must pay for shipping back to china plus i already paid 60 usd for duty and tax when i got it.
Fyi i already bought several x820 and 1pcs x829 6/128 from aliexpress, all working great. another x829 6/128 coming this week from aliexpress, i hope it doesnt defective like this one.
It is HW related issue for sure,i tried all of fixes laying around,nothing help...X829 4/64 from banggood
if all probematic x829 came from banggod, let us join our voices and ask them to give us solution...
alveox said:
if all probematic x829 came from banggod, let us join our voices and ask them to give us solution...
Click to expand...
Click to collapse
Tinydeal... same thing here
haven't had fp before - so i don't rlly miss it
Gearbest
Enviado de meu Le X820 usando Tapatalk
I flashed the Indian 19s firmware last night and the finger print scanner is working back now, though it is a bit slow (not as fast as Redmi Note 3 ), but it works 100% of the times. The only thing abnormal I have done is that I have scanned my finger twice ( same finger).
Previously I tried all tricks with LOS and Mokee and could not get the Finger Print scanner to work.
hawamahal said:
I flashed the Indian 19s firmware last night and the finger print scanner is working back now, though it is a bit slow (not as fast as Redmi Note 3 ), but it works 100% of the times. The only thing abnormal I have done is that I have scanned my finger twice ( same finger).
Previously I tried all tricks with LOS and Mokee and could not get the Finger Print scanner to work.
Click to expand...
Click to collapse
what problem you have before? slow respond fp or unrecognized fp when adding new fingerprint?
alveox said:
what problem you have before? slow respond fp or unrecognized fp when adding new fingerprint?
Click to expand...
Click to collapse
The problem i had before was that the FP sensor did not respond when trying to unlock i.e. looks like it was OFF. Previously even if you left the finger on the sensor for 10 seconds i did not react at all. The only cases when the FP reader worked was immediately after locking. Also the sensor did not have any problem adding fingerprints.
Helo though it's almost a month since i discovered this and i am sure i did not notice it during the initial days.On miui as well as cuatom roms. What should I do? Can the service centre solve this... Well i think No but they said a software flash from their side will solve this. Here r some pics.
One thing for sure the lcd panel is one of the worse screens i ever see.
Mine display have since the beginning white pixels.
bassbounce said:
One thing for sure the lcd panel is one of the worse screens i ever see.
Mine display have since the beginning white pixels.
Click to expand...
Click to collapse
Mine too
I've experienced the same problem bro..... Went to service center and they changed it for free..... It is a defective display and NOT a software error.
Akhil Krishna said:
I've experienced the same problem bro..... Went to service center and they changed it for free..... It is a defective display and NOT a software error.
Click to expand...
Click to collapse
Man are you serious? They gonna change it for free? ??????
bassbounce said:
One thing for sure the lcd panel is one of the worse screens i ever see.
Mine display have since the beginning white pixels.
Click to expand...
Click to collapse
10/10
How to check if your device has Tianma display on LOS?
Akhil Krishna said:
I've experienced the same problem bro..... Went to service center and they changed it for free..... It is a defective display and NOT a software error.
Click to expand...
Click to collapse
how much time did they take to change lcd display?
bassbounce said:
One thing for sure the lcd panel is one of the worse screens i ever see.
Mine display have since the beginning white pixels.
Click to expand...
Click to collapse
Tianma display too? Are there more buggy pannels? which pannels can have mido and which is the best?
Thanks and sorry if I'm bothering
I have a BOA panel lcd and i have image persistence on it, seams like permanent but not so visible like yours.
Also i have 5-6 stucked pixel and 2 death pixel on panel.
Tiannma is for sure better then boa bcs boa suffering from death and stucked pixles.
I had the same issue(Tianma) just notice it using Custom Rom..but on Miui unnoticeable.. I'm gonna go to Service centre for them to replace my lcd
I have the phone for few months (BoA panel).. no screen burn, no stuck/dead pixels.
Yes, you must claim warranty, and you will get new lcd, free, it's the same problem with my burn in screen, and I claim warranty, and get new lcd, free.
andreymixmax said:
Yes, you must claim warranty, and you will get new lcd, free, it's the same problem with my burn in screen, and I claim warranty, and get new lcd, free.
Click to expand...
Click to collapse
how much time did they take to change lcd panel???
Suvrat.18 said:
how much time did they take to change lcd panel???[/QU Yesterday I made a warranty claim, it only took 1 to 2 hours, and can wait.
Click to expand...
Click to collapse
I Had the same problem.. Replaced the Display.. But still having the issue.. By the way, What is Tianma Display?
Dadovvv said:
I have a BOA panel lcd and i have image persistence on it, seams like permanent but not so visible like yours.
Also i have 5-6 stucked pixel and 2 death pixel on panel.
Tiannma is for sure better then boa bcs boa suffering from death and stucked pixles.
Click to expand...
Click to collapse
muzaffarsyam said:
I had the same issue(Tianma) just notice it using Custom Rom..but on Miui unnoticeable.. I'm gonna go to Service centre for them to replace my lcd
Click to expand...
Click to collapse
Ripunjoy said:
I Had the same problem.. Replaced the Display.. But still having the issue.. By the way, What is Tianma Display?
Click to expand...
Click to collapse
above post I quote to make conclusion, also it`s happen to me (Tianma)
1. It`s rareeee IPS has burn in issue, so we need technical information about this instead of made assumption
2. It`s happen not only Tianma, BOA also
3. Replacing LCD/claim guarantee not fix your problem,
4. Mainly shows in Custom ROM, but recently in MIUI also (MIUI 9 beta)
I check
5. The problem in Nougat ROM since I don`t face in MM
6. I get the some report in other phone/brand facing the same issue in IPS Nougat
7. So, no`1 it`s best answer, we need technical explanation!
tekka19 said:
above post I quote to make conclusion, also it`s happen to me (Tianma)
1. It`s rareeee IPS has burn in issue, so we need technical information about this instead of made assumption
2. It`s happen not only Tianma, BOA also
3. Replacing LCD/claim guarantee not fix your problem,
4. Mainly shows in Custom ROM, but recently in MIUI also (MIUI 9 beta)
I check
5. The problem in Nougat ROM since I don`t face in MM
6. I get the some report in other phone/brand facing the same issue in IPS Nougat
7. So, no`1 it`s best answer, we need technical explanation!
Click to expand...
Click to collapse
You need to set up your colour calibration in your device..this will fix the shadow issue..maybe Google ****up they Colour calibration that cn make your device Burn in
tekka19 said:
above post I quote to make conclusion, also it`s happen to me (Tianma)
1. It`s rareeee IPS has burn in issue, so we need technical information about this instead of made assumption
2. It`s happen not only Tianma, BOA also
3. Replacing LCD/claim guarantee not fix your problem,
4. Mainly shows in Custom ROM, but recently in MIUI also (MIUI 9 beta)
I check
5. The problem in Nougat ROM since I don`t face in MM
6. I get the some report in other phone/brand facing the same issue in IPS Nougat
7. So, no`1 it`s best answer, we need technical explanation!
Click to expand...
Click to collapse
If Replacing Not Gonna Do Anything, What Can We Do To Prevent? My Friend Got The Same Phone But Not Happening To Him
muzaffarsyam said:
You need to set up your colour calibration in your device..this will fix the shadow issue..maybe Google ****up they Colour calibration that cn make your device Burn in
Click to expand...
Click to collapse
I`ll try
Ripunjoy said:
If Replacing Not Gonna Do Anything, What Can We Do To Prevent? My Friend Got The Same Phone But Not Happening To Him
Click to expand...
Click to collapse
Maybe try above suggestion but I don`t try it yet
Some phone has and other don`t, same like one ROM good to other user and other not, the behavior using the phone is different
But try ask your friend to use Lineage 14, In my case 98% can reproduce the issue, but check after some times not immediately, I think open the page in white background long enough will reproduce the problem. Also check it in reading mode
Using MIUI MM ROM fix the issue permanently for me, so far.
I did the research read all the threads made. Xda Mi forums everything.
Tested Both of the Miui9 versions and now the Miui10 global beta.
For me
Pubg works fine. Although people are having issue with Pubg too. ( touch wise)
Now there are not one. but two touch issue with keyboard.
People tend to confuse in between both.
Scenario 1 - I am typing something the keyboard suddenly disappeares and phone take the multitouch as a swipe up hence takes to home. ( FULL SCREEN GESTURES ENABLED. )
So people giving temporary fix as disabling gestures this is what it is.
Scenario 2 - The order of the alphabets typed. If i type fast The order of the alphabets are not right .
Happened with all the 3 versions of the miui rom ( 2 of miui9 and 1 of miui10 )
Typing pr pr pr fastly shows up to be rp pr rp rp rp pr pr
and que que que que que que que ( this que issue is not here on miui10 but was uqe uqe que on miui9 )
So the order issue Exists to the right side of the display for alphabets like "p" and "l"
rp pr pr rp pr pr rp pr rp
rl lr lr lr lr rl lr lr lr lr
I tried scrolling instagram feed from the left side of the display
centre of the display and from the right side of the display
On Miui9 Centre one was faster and smoother while from left and right it was slower.
Now on Miui10
Left and Centre is fine
Right side is still slower.
So keyboard issues are basically these two
1- Multitouch
2- Touch Sensitivity on the right side of the display.
I request the poco team and the Miui Developers to kindly have a look and the people to confirm this bug..
Regards
Prateek Varshney
My unit is from China, purchased in Italy. I maked all possible tries, no problem for me. Poco works amazing, touch is perfect.
I really hope its not a hardware issue.
I would be pissed if they dont fix it in software and i have to refund it
bluedragon02 said:
I really hope its not a hardware issue.
I would be pissed if they dont fix it in software and i have to refund it
Click to expand...
Click to collapse
It's not hardware issue, just change long press duration to 170ms in keyboard setting, voila your problem will be solved.
P. S. Fixed this issue in both miui 9 & 10 by doing this.
-TheKoolAnie- said:
It's not hardware issue, just change long press duration to 170ms in keyboard setting, voila your problem will be solved.
P. S. Fixed this issue in both miui 9 & 10 by doing this.
Click to expand...
Click to collapse
wow just did it and it works better not sure if entirely solved through
-TheKoolAnie- said:
It's not hardware issue, just change long press duration to 170ms in keyboard setting, voila your problem will be solved.
P. S. Fixed this issue in both miui 9 & 10 by doing this.
Click to expand...
Click to collapse
It didn't fix the problem at all in my case.
---------- Post added at 12:10 PM ---------- Previous post was at 12:09 PM ----------
The thing i find worrying is that it doesn't happen to everyone and also it depends on the area on the screen, so it sounds more like hardware imo. Maybe they can help it with software but it's not even sure...
denzel09 said:
My unit is from China, purchased in Italy. I maked all possible tries, no problem for me. Poco works amazing, touch is perfect.
Click to expand...
Click to collapse
Lucky guy??*
bluedragon02 said:
I really hope its not a hardware issue.
I would be pissed if they dont fix it in software and i have to refund it
Click to expand...
Click to collapse
The refund period is over for me now ?.
I just have to hope it's a software issue.
-TheKoolAnie- said:
It's not hardware issue, just change long press duration to 170ms in keyboard setting, voila your problem will be solved.
P. S. Fixed this issue in both miui 9 & 10 by doing this.
Click to expand...
Click to collapse
Not solved completely but definitely feels a little better now.
So can it be said that it's not a hardware issue?
Tomatot- said:
It didn't fix the problem at all in my case.
---------- Post added at 12:10 PM ---------- Previous post was at 12:09 PM ----------
The thing i find worrying is that it doesn't happen to everyone and also it depends on the area on the screen, so it sounds more like hardware imo. Maybe they can help it with software but it's not even sure...
Click to expand...
Click to collapse
same concern