Related
So, here's my cautionary tale of why jumping into things without research is a bad idea.
TLDR: Nougat Android Pay doesn't like unlocked bootloaders; locking the bootloader can be a bad idea, and IMEI restoration seems to work (at least, if it partially worked with IMEI 0)
I just upgraded to an A2017U from a Nexus 5 on Marshmallow, which had its bootloader unlocked, with SuperSu installed but root disabled and hidden, and Android Pay set up. All fine and dandy.
When I got my Axon 7, I thought it'd be a good idea to unlock the bootloader in case I needed to recover data, so using the Axon 7 Toolkit and some guides, that went just fine.
However, when I tried using Android pay, I found out that it didn't work on bootloader unlocked devices on Nougat, so I thought I'd just lock the bootloader again.
One "fastboot oem lock" later, I found myself in a world of trouble. The phone wouldn't boot, but at least I still had the stock recovery. Tried putting one of the EDL zips on an SDcard to see if it would flash. Nope.
Tried the Axon7Toolkit's EDL mode unbricker, but due to MD5 mismatches/missing files, it wouldn't take.
Tried Tenfar's official B07 EDL flash. Got "Error: Bad format" when I tried it after deleting the two files he mentioned, so somehow, I thought it'd be a good idea to add those files back in and try again. Nope.
Then I tried flashing the B15 EDL image. Somehow got dropped into "Factory Test Mode" and couldn't leave.
Then I flashed the B19 EDL image, which, finally got me back onto a working OS, with a locked bootloader.
At this point, everything connected fine, but I found out that my IMEI was 0 in both SIM 1 and SIM 2. Didn't think about it too much at the time, since everything worked, until I realized I couldn't receive any calls (placing them was fine). The culprit? Wi-Fi calling and VoLTE (on my carrier, T-Mobile) was on. Disabling those worked, but I realized that these technologies probably needed a valid IMEI to work.
Thus, it was time to go back into the business of unlocking bootloaders; I followed the GizDev guide to reprogramming IMEIs, which worked on the rooted, stock B19 image (the only thing the guide doesn't mention is that you need to manually install the 901D driver from device manager; it showed up in the list of already-installed drivers, probably from the XiaoMi flash tool installation).
Now, with the original IMEI back in place, I was elated to find out that Wi-Fi calling and VoLTE worked again! And now, here I am, exasperated yet excited, to have restored the functionality of my Axon before that fated "fastboot oem lock". Now, only if I could find a way to get Android Pay working again...
Use Magisk. If you want to stay stock you have to use an older version. Look at the version used by bad boyz.
I have the same problem that was the method he used to restore his image and helped me to thank infinitely
Hi all,
Wishing you all a happy New Year in arrears and the very best for the next 12 months.
I've got a problem with my device, its a STF-AL10 model with international rom bought during the November Sales.
It came with STF-L09C432B150 installed, I got the bootloader unlocked, TWRP installed and rooted with Magisk and was working fine except the capacitive buttons.
I thought I could live without capacitive buttons but I didn't work out and I had the urge to find a solution. After some intensive reseach (48hrs on a weekend in my 'lab') it seems the B120 firmware had no issues with the capacitive buttons, so I tried to downgrade to that and thats when the problems started.
Coming from an ancient Sony Z2, I never had issues flashing ROMS, Kernels and the sort as it was almost always easily done in TWRP or CWM (I had a Multi boot thing going, so I chose which recovery I fancied!). Anyway this are my issues now:
- Obviously, my phone was rebranded at origin as I know for sure AL-10 is not for EU market
- I tried restoring the same STF-L09C432B150 (rollback package found on XDA) with DC-Unlocker (wasted 19 Euro) but did not work. Always stops at 5% near end of flashing.
- Tried B130. same error.
- Tried Chinese STF-AL10C00B110. Same error.
- Tried full board flash for STF-AL10 with all DC Phoenix files. Same error.
- Tried forced method with files on a Sandisk SDcard (64GB) formatted to exFAT. Fails, wrong files.
- I noticed that in ADB, it said my bootloader was unlocked but FRP locked.
- After board flash, ADB said Bootloader unlocked (nothing about FRP) but in Muli-tool it says LOCKED.
- Now all ADB commands the write to the phone give errors.
DC-unlocker support keep on saying I should use the correct firmware for my phone, ok but the phone was rebranded at source...do use a Chinese firmware first then update ?
in desperation I did another full board flash but this time I think I wiped oeminfo and Vendor partions. ( I think this is what caused the HARD-BRICK!). Now no Honor logo, no Recovery, No eRecovery, nothing but a blank black screen. ADB still works but no status about bootloader or FRP.
IMEI has changed to 0123456789ABCDEF
You can all laugh and shake your heads which I will take as my punishment but is there a solution to all this, I'm willing to pay another 19 EUR for DC-Phoenix if it helps to fix my phone and if possible get it rooted with all buttons and functions working. That was my intension all along (I'm not really interested in custom Roms, just root access!).
HCU tool for some reason does not install on my computer, and besides, the phone does not boot into an OS to be able to change OEM and VENDOR data.
I even tried the HOTA.zip in the ReBRAND HONOR 9 thread but the file is missing (link down).
And to top it all there is no UK service center.
Please advise...
I think DC unlock is not supported for thì this model. Did Did you try Huawei Funky???
Apparently all versions of Honor 9 are supported by DC-unlocker and DC-Pheonix....
ums1405 said:
Hi all,
Wishing you all a happy New Year in arrears and the very best for the next 12 months.
I've got a problem with my device, its a STF-AL10 model with international rom bought during the November Sales.
It came with STF-L09C432B150 installed, I got the bootloader unlocked, TWRP installed and rooted with Magisk and was working fine except the capacitive buttons.
I thought I could live without capacitive buttons but I didn't work out and I had the urge to find a solution. After some intensive reseach (48hrs on a weekend in my 'lab') it seems the B120 firmware had no issues with the capacitive buttons, so I tried to downgrade to that and thats when the problems started.
Coming from an ancient Sony Z2, I never had issues flashing ROMS, Kernels and the sort as it was almost always easily done in TWRP or CWM (I had a Multi boot thing going, so I chose which recovery I fancied!). Anyway this are my issues now:
- Obviously, my phone was rebranded at origin as I know for sure AL-10 is not for EU market
- I tried restoring the same STF-L09C432B150 (rollback package found on XDA) with DC-Unlocker (wasted 19 Euro) but did not work. Always stops at 5% near end of flashing.
- Tried B130. same error.
- Tried Chinese STF-AL10C00B110. Same error.
- Tried full board flash for STF-AL10 with all DC Phoenix files. Same error.
- Tried forced method with files on a Sandisk SDcard (64GB) formatted to exFAT. Fails, wrong files.
- I noticed that in ADB, it said my bootloader was unlocked but FRP locked.
- After board flash, ADB said Bootloader unlocked (nothing about FRP) but in Muli-tool it says LOCKED.
- Now all ADB commands the write to the phone give errors.
DC-unlocker support keep on saying I should use the correct firmware for my phone, ok but the phone was rebranded at source...do use a Chinese firmware first then update ?
in desperation I did another full board flash but this time I think I wiped oeminfo and Vendor partions. ( I think this is what caused the HARD-BRICK!). Now no Honor logo, no Recovery, No eRecovery, nothing but a blank black screen. ADB still works but no status about bootloader or FRP.
IMEI has changed to 0123456789ABCDEF
You can all laugh and shake your heads which I will take as my punishment but is there a solution to all this, I'm willing to pay another 19 EUR for DC-Phoenix if it helps to fix my phone and if possible get it rooted with all buttons and functions working. That was my intension all along (I'm not really interested in custom Roms, just root access!).
HCU tool for some reason does not install on my computer, and besides, the phone does not boot into an OS to be able to change OEM and VENDOR data.
I even tried the HOTA.zip in the ReBRAND HONOR 9 thread but the file is missing (link down).
And to top it all there is no UK service center.
Please advise...
Click to expand...
Click to collapse
Try stock service B130 firmware:
https://forum.xda-developers.com/honor-9/how-to/stf-l09c432b130-capacitive-buttons-100-t3729106
Instead of step 4 do forced upload: VOLUME UP + VOLUME DOWN + POWER
Hi,
I've managed to re flash b150. In doing so I got back recovery and erecovery but when you reach that final stage of the process the phone stops at 5%. When I reboot to recovery, factory reset stops at 35%
Any ideas
?
Sent from my [device_name] using XDA-Developers Legacy app
ADB now showing BOOTLOAD UNLOCKED but there is no FRP status.
Sent from my [device_name] using XDA-Developers Legacy app
ums1405 said:
ADB now showing BOOTLOAD UNLOCKED but there is no FRP status.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
FRP status is not only on Chinese phones
you need to sew firmware for al10
The phone was rebounded by the shop I bought it from.
It said STF-L09B150 indexical info when the phone was working.
So if I'm going to repair this brick what update files should I use?
Original Chinese or the b150 used when rebranded?
Sent from my [device_name] using XDA-Developers Legacy app
Hi all,
FYI, I've sent the phone back to the shop I bought it from.
I'll take my chances, better than paying money for something that may not work.
Thanks everyone for showing interest in my situation, I let you all know how I get along with this issue.
Ps.: As a community, lets push Huawei/Honor to release Kernel Sources for this model and others like the P10 Plus.
Ps: Huawei/Honor have to realise that a strong developer community adds value and desirability to a product. That's how a product becomes 'Cool' translating into more revenue/customers/profit - eg OnePlus.
.
Hi all, a quick update .....
Sent the phone back and from what I gather the phone actually had an issue with the main board.
Now enjoying a brand new MATE 10 (Non-pro with 6/128gb) in beautiful Obsidian black.
Wonderful.
Back in december/january some users reported a glitch while rebranding STF-AL10 to STF-L09 with the old nougat hwota (at oem bin flashing step).
After editing hwota script, then rebranded : they ended with a FRP locked status.
Their only way to unlock frp was with dcunlocker or funkyhuawei I don't remember.
After frp unlocked, their bootloader wasn't seen through fastboot.
I think this could be solved by regedit a value in registry.
To my knowledge the only public firmware files working with the dload way (3 buttons + usb connected) are the one titled "service repair", the others one won't work dload as they are. They are for hwota or forcing "official" ota.
Hello friends of XDA, I have a big problem between hands, I have a MOTO Z and I had it in android 7.0 since last year the update to andorid 7.1.1 did not arrive and I felt that with android 7 the battery was consumed very quickly, so I tried to find the update to flash it and just about 3 days ago I found it, I proceeded to download it and flash it in fastboot and adb.
The thing is that a few months ago, browsing through my phone (I had already rotated it, and unlocked the bottloader, I decided to re-block the bootloader, and remove the root, which never worked at 100) I got into the developer options, and I saw an option that until then I didn't know about its "OEM Unlock"function, as it was turned on and deactivated because I thought it didn't work.
Returning to the update flashing I proceeded as usual, with the commands, I proceed to restart the device and show the image of the boot of motrola but then it shows me a message in red letters.
"Startup Failed"
"failed to pass validation, backup to fastboot.
I thought it was a compatibility problem with the downloaded version of 7.1.1 so again I decided to flash the stock rom 7.0 but when I finished and restart the same message appeared.
I started to investigate and it seems that the OEM blockade is responsible for not being able to install any Stock Rom, or anything, and now I have a nice brick with Moto mods and I can't use it.
I wanted to unlock OEM in fastboot but nothing. sends message from "ALLOW OEM UNLOCK IN SETTINGS"
There is way to unlock the OEM from pc or fastboot without needing to be unlocked from the android settings, as in my case it is impossible for me,
I'd be very grateful for your help friends, I know it's a bit tedious to read but it's the only phone I have and I feel weird without it on the street.:bueno::bueno::llorando:
I'm with same problem here!
Suckmymfdick17 said:
Hello friends of XDA, I have a big problem between hands, I have a MOTO Z and I had it in android 7.0 since last year the update to andorid 7.1.1 did not arrive and I felt that with android 7 the battery was consumed very quickly, so I tried to find the update to flash it and just about 3 days ago I found it, I proceeded to download it and flash it in fastboot and adb.
The thing is that a few months ago, browsing through my phone (I had already rotated it, and unlocked the bottloader, I decided to re-block the bootloader, and remove the root, which never worked at 100) I got into the developer options, and I saw an option that until then I didn't know about its "OEM Unlock"function, as it was turned on and deactivated because I thought it didn't work.
Returning to the update flashing I proceeded as usual, with the commands, I proceed to restart the device and show the image of the boot of motrola but then it shows me a message in red letters.
"Startup Failed"
"failed to pass validation, backup to fastboot.
I thought it was a compatibility problem with the downloaded version of 7.1.1 so again I decided to flash the stock rom 7.0 but when I finished and restart the same message appeared.
I started to investigate and it seems that the OEM blockade is responsible for not being able to install any Stock Rom, or anything, and now I have a nice brick with Moto mods and I can't use it.
I wanted to unlock OEM in fastboot but nothing. sends message from "ALLOW OEM UNLOCK IN SETTINGS"
There is way to unlock the OEM from pc or fastboot without needing to be unlocked from the android settings, as in my case it is impossible for me,
I'd be very grateful for your help friends, I know it's a bit tedious to read but it's the only phone I have and I feel weird without it on the street.:bueno::bueno::llorando:
Click to expand...
Click to collapse
Try to boot in Fastboot flash twrp and flash ressurection remix rom. It's great rom. Forget about locking. I had the same problem like you as I was trying to flash stock ROM and lock bootloader.
I gave up on this.
knjigo said:
Try to boot in Fastboot flash twrp and flash ressurection remix rom. It's great rom. Forget about locking. I had the same problem like you as I was trying to flash stock ROM and lock bootloader.
I gave up on this.
Click to expand...
Click to collapse
Well, when the root didn't work properly, I flashed the phone again and blocked the bootloader. Will I still be able to install TWPR or should I lose my phone?
Suckmymfdick17 said:
Well, when the root didn't work properly, I flashed the phone again and blocked the bootloader. Will I still be able to install TWPR or should I lose my phone?
Click to expand...
Click to collapse
What do you mean with "I blocked my bootloader"?
Twrp is easy to flash. Root is integrated in ressurection remix rom. And this rom is great. Just try to flash twrp in Fastboot and than ressurection remix with twrp.
Can you boot in Fastboot?
Do you remember what build of 7.1.1 you had on your device before downgrading to 7.0?
If so, I would suggest finding that firmware (the full stock firmware, not OTA updates) or newer if you can, and try to flash that. Since your bootloader is still likely from the 7.1.1 build, a locked bootloader will only permit files matching the same patch level (i.e. from the exact same stock ROM as that bootloader patch) to boot.
If not, then unfortunately there's not a lot we can do. You could wait for a newer firmware to get leaked, but as your device is unable to boot (due to failing the bootloader checks) and you cannot toggle OEM unlocking because you cannot boot, it's a nasty vicious circle that is difficult to get out of. You may have to consider sending your device for service and pay for an expensive motherboard replacement otherwise, since Motorola have a record of your device being unlocked. Your service centre experience may vary.
Only lock a bootloader after ensuring you've flashed all the stock firmware and it is all the same patch level as your bootloader. Hopefully you'll find newer firmware that you can repair with.
tjgibri said:
I'm with same problem here!
Click to expand...
Click to collapse
I solved it, I finally flashed the stock rom to my phone and it works.
Apparently my pc was not flashing the stock rom in adb, and the phone turned off when loading the software. I did it 3 times until I load correctly and start well.
if you have the same problem apparently then OEM Blocking is not responsible. You have to flash the most current rom or the one that you had by default when the brick happened to you, you flash it in a normal way with commands of adb and ready, I would have to come back to life.
download from firmware center MotoZ Griffin the most current rom stock at 7.1.1
echo92 said:
Do you remember what build of 7.1.1 you had on your device before downgrading to 7.0?
If so, I would suggest finding that firmware (the full stock firmware, not OTA updates) or newer if you can, and try to flash that. Since your bootloader is still likely from the 7.1.1 build, a locked bootloader will only permit files matching the same patch level (i.e. from the exact same stock ROM as that bootloader patch) to boot.
If not, then unfortunately there's not a lot we can do. You could wait for a newer firmware to get leaked, but as your device is unable to boot (due to failing the bootloader checks) and you cannot toggle OEM unlocking because you cannot boot, it's a nasty vicious circle that is difficult to get out of. You may have to consider sending your device for service and pay for an expensive motherboard replacement otherwise, since Motorola have a record of your device being unlocked. Your service centre experience may vary.
Only lock a bootloader after ensuring you've flashed all the stock firmware and it is all the same patch level as your bootloader. Hopefully you'll find newer firmware that you can repair with.
Click to expand...
Click to collapse
Thanks for your help friend, I finally flashed it with a recent android 7.1.1 update. Apparently the OEM lockout was not the culprit, but it was an interrupted flash of android 7.1.1 at some point when loading the software to the phone, it would shut down on its own and not complete the installation, which showed me the mentioned message. I didn't realize that and thought it was the OEM blockade.
I finally did it on another pc and it worked. the phone came back to life.
I have one Moto Z2 Force (XT1789-05), bought from coolicool.com, I didn't know device came Unlocked Bootloader, Device rom had problem with many apps, I googled and found one topic in XDA developer to Install Stock Rom, I downloaded and Installed India Rom, it's worked somehow fine, but still had problem, I downloaded Verizon Rom, Android 8, after Installed Android 8 Verizon Rom, Locked device bootloader immediately, now device stuck at Welcome Wizard in Android 8, after select language I got this message: (Please wait, this may take a few minutes) this is proof video (http://ahmn.co/Upload/IMG_0161.MOV), after this issue, device already locked, I can't unlock, because need to go to the Developer Option in Setting, I stucked in Welcome Wizard, there isn't any bypass, So, I start to search in Google, XDA-Forum, Android Central and more, I created many threads, many requests, no one can't help me, I tried to reach google developer support to the tell to me how can I bypass Android 8 Welcome Wizard, there is must be a way, but I can't find it, now I can access to Android Recovery and Bootloader
1. if you help me to FORCE UNLOCK device without need Developer Option in setting my problem will solve
2. If you help me to Bypass Android Welcome Wizard, access setting and enable OEM Unlock
3. If you help me to update the device from Android 8 to Android 9 Verizon ROM via ADB Sideload or Update from SD card in Recovery mode
4. If you have any idea to how can I fix it
Extra Information: I bought Belkin and Uni USB-C to Ethernet Adaptor to help me bypass Android 8 Welcome Wizard, I bought WSKY WIFI Adaptor because device Wifi can't find any network (I found QR setup by tap several times in Language Selection), after this section need to download google device policy apk, my device can't find any Wifi Network and my Ethernet Adaptor can't help me either, So, I just remained with my phone, and I can't do anything,
Please, someone, help me
My Device SKU: XT1789-05
Hi all,
My Redmi Note 4 (MTK) with stock ROM and MIUI 8 (presumably) had several continuous strange reboots and since then. It doesn't accept My password to unlock the phone. (I assume never changed the password myself)
I have Google and Mi accounts logged in on the phone and the device data encryption is ON. there are valuable data on my phone and don't want to get it unlocked in exchange for losing all the photos and data. I didn't find any way to unlock the device remotely via Google or Mi account which is a frustration.
How could I solve the problem?
P.S: I've seen a password resetter tool on an old topic in Mi forum which also is proposed for a different model (Note 3G). not sure if it could help. Should I try that? the Topic is here
ghandil said:
Hi all,
My Redmi Note 4 (MTK) with stock ROM and MIUI 8 (presumably) had several continuous strange reboots and since then. It doesn't accept My password to unlock the phone. (I assume never changed the password myself)
I have Google and Mi accounts logged in on the phone and the device data encryption is ON. there are valuable data on my phone and don't want to get it unlocked in exchange for losing all the photos and data. I didn't find any way to unlock the device remotely via Google or Mi account which is a frustration.
How could I solve the problem?
P.S: I've seen a password resetter tool on an old topic in Mi forum which also is proposed for a different model (Note 3G). not sure if it could help. Should I try that? the Topic is here
Click to expand...
Click to collapse
If you are rooted and have twrp installed then try this
https://forum.xda-developers.com/android/software-hacking/remove-lockscreen-recovery-t3530008
MyNameIsRage said:
If you are rooted and have twrp installed then try this
https://forum.xda-developers.com/android/software-hacking/remove-lockscreen-recovery-t3530008
Click to expand...
Click to collapse
Thank you. I didn't install any third party recovery tool or root the device myself. However, root checker apps declared the device is rooted. I assume it's the default setting by Xiaomi and they've shipped the Redmi Note 4 device rooted?
Regarding the recovery tool, I'll enter into Mi's default recovery environment by pressing power + volume up. Could I do anything helpful there? like installing twrp
I had this same issue recently (three times in the space of 3 months)
I wish I'd seen this thread earlier as I just factory-reset. The 3rd tone it happened, I reverted to stock miui. I was using the modded aosp Rom at the time.
ghandil said:
Thank you. I didn't install any third party recovery tool or root the device myself. However, root checker apps declared the device is rooted. I assume it's the default setting by Xiaomi and they've shipped the Redmi Note 4 device rooted?
Regarding the recovery tool, I'll enter into Mi's default recovery environment by pressing power + volume up. Could I do anything helpful there? like installing twrp
Click to expand...
Click to collapse
Vendors never ship devices with root access. Is your device second hand? Also did you notice having any app named supersu or magisk installed on your device earlier?
Currently you have miui recovery installed. You can only do a factory reset from there, but it would just wipe everything including data. And regarding all the tools you talked about. They require an unlocked bootloader. So inorder to not lose data and Remove password you need to unlock your bootloader and install twrp recovery. Here's the thread for it
https://forum.xda-developers.com/redmi-note-4/development/how-to-install-twrp-recovery-root-t3717952
Note that getting unlock permission can take from 1 week to 3 weeks.
If you want to get your phone fixed urgently then the best way is to visit a service centre. But then if you can wait for a week or so, you can fix your device yourself.
After twrp is installed then just follow the guide i linked above.
MyNameIsRage said:
Vendors never ship devices with root access. Is your device second hand? Also did you notice having any app named supersu or magisk installed on your device earlier?
Currently you have miui recovery installed. You can only do a factory reset from there, but it would just wipe everything including data. And regarding all the tools you talked about. They require an unlocked bootloader. So inorder to not lose data and Remove password you need to unlock your bootloader and install twrp recovery. Here's the thread for it
https://forum.xda-developers.com/redmi-note-4/development/how-to-install-twrp-recovery-root-t3717952
Note that getting unlock permission can take from 1 week to 3 weeks.
If you want to get your phone fixed urgently then the best way is to visit a service centre. But then if you can wait for a week or so, you can fix your device yourself.
After twrp is installed then just follow the guide i linked above.
Click to expand...
Click to collapse
No my device wasn't second hand, Actually, it was somehow strange because some apps like a mobile bank app were stating that the device is rooted whereas some other apps didn't detect any root sign on the device. There isn't SuperSu or Magisk installed on the phone too.
I just applied for getting unlocking the phone (Although for my HTC phones in the past, just used some tools from here and get the bootloader unlocked. I don't know why it's not the case for the Redmi Note 4 -or Xiaomi phones may be- in general)
I also tried the Method II here (was expressed would work for the phones Without Recovery Installed) but got Permission denied error on adb shell for rm *.key command. (Maybe it's related to the locked bootloader?)
Thanks
ghandil said:
No my device wasn't second hand, Actually, it was somehow strange because some apps like a mobile bank app were stating that the device is rooted whereas some other apps didn't detect any root sign on the device. There isn't SuperSu or Magisk installed on the phone too.
I just applied for getting unlocking the phone (Although for my HTC phones in the past, just used some tools from here and get the bootloader unlocked. I don't know why it's not the case for the Redmi Note 4 -or Xiaomi phones may be- in general)
I also tried the Method II here (was expressed would work for the phones Without Recovery Installed) but got Permission denied error on adb shell for rm *.key command. (Maybe it's related to the locked bootloader?)
Thanks
Click to expand...
Click to collapse
Adb required usb debugging and computer to be authorised, so since your phone is locked you can't allow it. And adb won't be able to perform anything on miui on lockscreen.
MyNameIsRage said:
Adb required usb debugging and computer to be authorised, so since your phone is locked you can't allow it. And adb won't be able to perform anything on miui on lockscreen.
Click to expand...
Click to collapse
Since my phone has the USB debugging enabled already and I've used it with my computer (the computer was authorized). I was able to back up my files on the phones memory via ADB with below command:
Code:
adb pull "sdcard/[Folder Name]" "Path/On/My Computer/To/BackUp"
After that, I've wiped out the phone remotely via Mi account. This way I just lost my SMS and call history, since hadn't synced them with Mi cloud account.
Anyway, I'm looking forward to getting my unlock permission from Xiaomi and install a custom recovery for future possible issues.
Hey folks,
I've tried my best so far, but I am stuck.
I wanted to change the ROM on my wife's Redmi 3 pro. It was running on a rather old RR version and I wanted to go back to MIUI to have a better camera.
After an unsuccesful attempt to flash this, I was stuck in a bootloop.
This - in general - was no problem: I've decieded to flash an official firmware via MiFlash, but this apparently didn't work as well.
So, now MiFlash has locked the phone again but not properly installed anything.
I can access Fastboot and the pre-installed recovery, but nothing more.
The unlock tool tells me that I can't unlock it because it is apparentyl not bound to my MI account (and I have no clue with which account I've unlocked it the last time).
Desperately appreciation any kind of help!
Thanks in advance.
UPDATE: I was apparently not patient enough. After quite a while it finally booted. Now I can access the system again, but still can't unlock the phone.
UPDATE 2: I also found out with which account I've unlocked it and thus everything worked after all. Now sporting Lineage 14 with camera mod.
Please, feel free to explain how can it finally booted. Your experience might be help somebody sometime.
?