Build Environment on an arm64 Device - Android Q&A, Help & Troubleshooting

Mainly to challenge myself, is it possible through chroot Linux or by some other method through a rooted AOSP based arm64 Android environment, to create a build environment suitable to build a Linux kernel, boot image, etc... And if so what are the caveats? Would a cross-compiling toolchain be necessary at this point? I would be building for other devices just like it... arm64. Also I would be interested in building halium for the K20

Ok so to start off I've used Linux deploy to create an Ubuntu chroot environment. I wrote init.d script to mount bind my external SD card which is formatted in ext4 for my cloned repositories to my chroot home folder. I also have my downloads folder or my internal SD card mounted to the home folder in the chroot environment. I've installed a bunch of recommended compilers and development packages in Ubuntu and I'm about to clone the halium source.
I'm basically here either waiting for some advice or suggestions or for someone to tell me I'm **ssing in the wind

Related

|SETUP| To Build AOSP On MAC [Dev's Only]

(This is not nessesary for MAC but you can have this for further use later,
In general you will need:
Python 2.4 -- 2.7, which you can download from python.org.
JDK 6 if you wish to build Gingerbread or newer; JDK 5 for Froyo or older. You can download both from java.sun.com.
Git 1.7 or newer. You can find it at git-scm.com)
Setting up a Mac OS X build environment
To build the Android files in a Mac OS environment, you need an Intel/x86 machine running MacOS 10.6 (Snow Leopard).
Android must be built on a case-sensitive file system because the sources contain files that differ only in case. We recommend that you build Android on a partition that has been formatted with the journaled file system HFS+. HFS+ is required to successfully build Mac OS applications such as the Android Emulator for OS X.
Creating a case sensitive disk image
If you want to avoid partitioning/formatting your hard drive, you can use a case-sensitive disk image instead. To create the image, launch Disk Utility and select "New Image". A size of 25GB is the minimum to complete the build, larger numbers are more future-proof. Using sparse images saves space while allowing to grow later as the need arises. Be sure to select "case sensitive, journaled" as the volume format.
You can also create it from a shell with the following command:
# hdiutil create -type SPARSE -fs 'Case-sensitive Journaled HFS+' -size 40g ~/android.dmg
This will create a .dmg (or possibly a .dmg.sparsefile) file which, once mounted, acts as a drive with the required formatting for Android development. For a disk image named "android.dmg" stored in your home directory, you can add the following to your ~/.bash_profile to mount the image when you execute "mountAndroid":
# mount the android file image
function mountAndroid { hdiutil attach ~/android.dmg -mountpoint /Volumes/android; }
Once mounted, you'll do all your work in the "android" volume. You can eject it (unmount it) just like you would with an external drive.
Installing required packages
Install XCode from the Apple developer site http://developer.apple.com/. We recommend version 3.1.4 or newer, i.e. gcc 4.2. Version 4.x could cause difficulties. If you are not already registered as an Apple developer, you will have to create an Apple ID in order to download.
Install MacPorts from macports.org.
Note: Make sure that /opt/local/bin appears in your path BEFORE /usr/bin. If not, add
export PATH=/opt/local/bin:$PATH
to your ~/.bash_profile.
Get make, git, and GPG packages from MacPorts:
$ POSIXLY_CORRECT=1 sudo port install gmake libsdl git-core gnupg
If using Mac OS 10.4, also install bison:
$ POSIXLY_CORRECT=1 sudo port install bison
Reverting from make 3.82
There is a bug in gmake 3.82 that prevents android from building. You can install version 3.81 using MacPorts by taking the following steps:
Edit /opt/local/etc/macports/sources.conf and add a line that says
file:///Users/Shared/dports
above the rsync line. Then create this directory:
$ mkdir /Users/Shared/dports
In the new dports directory, run
$ svn co --revision 50980 http://svn.macports.org/repository/macports/trunk/dports/devel/gmake/ devel/gmake/
Create a port index for your new local repository:
$ portindex /Users/Shared/dports
Finally, install the old version of gmake with
$ sudo port install gmake @3.81
Setting a file descriptor limit
On MacOS the default limit on the number of simultaneous file descriptors open is too low and a highly parallel build process may exceed this limit.
To increase the cap, add the following lines to your ~/.bash_profile:
# set the number of open files to be 1024
ulimit -S -n 1024
Next: Download the source
Your build environment is good to go! Proceed to downloading the source....
Why you posted this? It can be found on android's website. Also,you didn't post the whole tutorial.
why not simply install VirtualBox vor Mac and install a VM within?
...sometimes the life is complicated^^
@SWEATTAIMI did you actually manage to get a fully working build on mac? And if yes which version of OS X?
I've tried many times on OS X 10.7 and eventually ended up installing ubuntu on a separate partition...
secondary partition? what about the users here?
i use a VM on a small **** x86 notebook and can do all the development work + complete compiling. i thought a mac has much better hardware^^
I used to have ubuntu installed in vmware too but compiling took too long and it was really annoying. I rather prefer it this way... No shared resources
popdog123 said:
@SWEATTAIMI did you actually manage to get a fully working build on mac? And if yes which version of OS X?
I've tried many times on OS X 10.7 and eventually ended up installing ubuntu on a separate partition...
Click to expand...
Click to collapse
Fully working what ?
Sent from my LG-P500 using xda premium
ciaox said:
Why you posted this? It can be found on android's website. Also,you didn't post the whole tutorial.
Click to expand...
Click to collapse
This is full for mac
Its a setup only
Sent from my LG-P500 using xda premium
SWEATTAIMI said:
Fully working what ?
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
:|
10 char
popdog123 said:
:|
10 char
Click to expand...
Click to collapse
You mean build then i have not came to that point yet as i downloaded all sources on my Japanese lesson xD
Sent from my LG-P500 using xda premium
I wonder if this will work for ICS on 4GB macbook
caslca said:
I wonder if this will work for ICS on 4GB macbook
Click to expand...
Click to collapse
Yes it will worked on a macbook 2010 version
Sent from Mexico

[Q] compile on chroot linux (BT5) and run on Android?

Hello Gents,
I'm a bit stuck. I try to compile truecrypt on the transformer. I managed to compile a binary in the chroot BT5 enviroment from thread:
http://forum.xda-developers.com/showthread.php?t=1428475
The binary runs in the chroot env. and it works at least partly. I can create FAT containers and mount them, but only without kernel encryption.
But it doesn't run on the Android environment. When I try to start it I get:
sh: truecrypt: no such file or directory
from http://forum.xda-developers.com/showthread.php?t=1484488 I read that I should compile static but actually the wxWidgets are compiled static.
Do I still need the wxWidget library on Android then?
Your help is highly appreciated.
Chris.

[TOOL] OSConnect ~ Run Arch and Ubuntu alongside eachother

Hey XDA!
For those of us that use Arch linux, compiling Android projects can be a little more challenging than on Ubuntu due to the fact the Arch is a rolling release distro. To solve this, I made a tool that allows YOU to choose whether you want to run Arch or Ubuntu in the command line without dual booting. This isn't anything new, just a simplified implementation of an existing method.
What it does:
When you open a terminal, you will be prompted with "Would you like to connect to Arch linux or Ubuntu?". You can enter A for Arch or U for Ubuntu. If you choose Arch, you will be put into your stock environment, but your bash prompt will look like
Code:
[[COLOR="red"]user[/COLOR]@[COLOR="cyan"]Arch[/COLOR] ~]:
If you choose Ubuntu, you will be entered into your Ubuntu chroot, and your bash prompt will look like
Code:
[[COLOR="red"]user[/COLOR]@[COLOR="magenta"]Ubuntu[/COLOR] ~]:
DISCLAIMER
Because Arch linux is aimed at enthusiast and experienced linux users, replies about simple or lack-of-experience issues will not be given priority. Use the following with caution.
How to setup an Ubuntu chroot:
1. Install schroot and debootstrap
2. Follow the steps given here https://bbs.archlinux.org/viewtopic.php?id=100039, or run create-chroot.sh in the OSConnect git repo.
How to install OSConnect:
1. Clone https://github.com/frap129/OSConnect
2. Run the given install.sh
3. If you use terminal mostly locally, respond "Local" to the prompt. If you mostly connect via ssh, respond "SSH" to the prompt.
4. If you connect via SSH, connect as root from now on, not your user. OSConnect will switch to your user for you.
Done! Restart to use.
XDA:DevDB Information
OSConnect, Tool/Utility for the Chef Central
Contributors
frap129
Source Code: https://github.com/frap129/OSConnect
Version Information
Status: Stable
Created 2016-05-15
Last Updated 2016-05-15
How it works:
Ubuntu chroot:
This work by downloading the Ubuntu system files to /var/chroot/ubuntu. The schroot tool then executes bash from ubuntu, and tricks the system into believing that /var/chroot/ubuntu is actually the system root directory.
OSConnect:
OSConnect is contained in its own file, .osconnectrc. This file is executed when shell is reached via your .bashrc. The .osconnectrc is a bash script that asks what operating system you would like to use, then either dumps you into normal shell, or starts the Ubuntu chroot. It also modifies the PS1 (bash prompt) to look cleaner and better distinguish between Arch and Ubuntu.
What is the difference between local and ssh?
The only difference between the local and ssh versions is whether or not youre prompted for your password (when chroot is started) because schroot must be run as root. On the local version, you are simply prompted for your password when necessary. On the ssh version, you are expected to connect as root, and therefore will not be prompted for your password.
HALP I CANT LOG IN AS ROOT
If you are having trouble connecting via SSH as root, follow https://askubuntu.com/questions/511833/cant-ssh-in-as-root
Resource wise is this lighter than running ubuntu as a docker image?
HaoZeke said:
Resource wise is this lighter than running ubuntu as a docker image?
Click to expand...
Click to collapse
I'm way to late for this to matter, but yes, its much lighter than running at as a docker image
frap129 said:
I'm way to late for this to matter, but yes, its much lighter than running at as a docker image
Click to expand...
Click to collapse
Better late than never! ? neat stuff ?

ArnoldTheBat r72 booting to blank screen on Acer Chromebook C720P

I am thinking of starting a new thread to solve the issue of ArnoldTheBat r72 booting to blank screen on Acer Chromebook C720P
oops I just did -
Building Chromium/Chrome OS r71 or r72 Kernel RFC
It seems the only way to tackle drivers issues is to build the Kernel.
So, trying to build a Chrome OS r72 Kernel to use on ATB r72 to address these drivers issues, particularly the inability to boot Acer Chromebook C720P -
As I have never done this before, I need some pointers as documentation for this is very sketchy on Google groups. RFC alesimula...
What I have available is Ubuntu Bionic, & necessary storage to build (over 100 GB) -
I also have a chromefied Nocturne then eve 73/swtpm.tar SSD (on top of ABT r72) with Bionic crouton with same over 100 GB storage available.
First steps to build Kernel
Build chrome os kernel and kernel modules
In a Chrome OS box (like Nocturne r71 with kernel 4.14) - install crouton Bionic
$ sudo sh ~/Downloads/crouton -r bionic -t xfce,xiwi,touch,extension,keyboard,cli-extra,chromium
after installation enter chroot
$ sudo enter-chroot
$ sudo apt-get install git-core make kernel-package bc nano
$ git clone https://chromium.googlesource.com/chromiumos/third_party/kernel -b chromeos-4.14
TBC after download
adapted from https://github.com/dnschneid/crouton/wiki/Build-chrome-os-kernel-and-kernel-modules
Kernel download Chrome OS Kernel 4.14
After issuing the git clone command - I received some errors...
such as
error: RPC failed; curl 56 GnuTLS recv error (-54): Error in the pull function.
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed
...
& after several tries succeeded with the message:
remote: Sending approximately 2.11 GiB ...
remote: Counting objects: 24648, done
remote: Total 7215674 (delta 5927776), reused 7215674 (delta 5927776)
Receiving objects: 100% (7215674/7215674), 2.10 GiB | 1.59 MiB/s, done.
Resolving deltas: 100% (5927776/5927776), done.
Checking out files: 100% (62736/62736), done.
So now the next business after securing the source code is to compile the kernel adding the modules/drivers needed to resolve issues such as camera & graphics, etc.
Hopefully this info is in here too
https://github.com/dnschneid/crouton/wiki/Build-chrome-os-kernel-and-kernel-modules
I am using Acer Iconia W700 with chromefied nocturne on top of arnoldthebat r72...
crouton bionic with xfce4 is my chroot environment to compile the kernel...
I guess I need to dig in, get the proper commands, it should not be different from compiling other Kernels for Android, Ubuntu, Arch Linux...
What I know is that it takes time...
hopefully if I get drivers, it will be worth the effort
Extra refs to solve cloning issues
https://devopscube.com/gnutls-handshake-failed-aws-codecommit/
https://stackoverflow.com/questions/38378914/git-error-rpc-failed-curl-56-gnutls
Compressed Chrome OS Kernel 4.14 using tar/xz is bleeming 2.4 GB!
$ tar cJvf kernel.tar.xz kernel
References for setting up configuration to build the Chrome OS kernel -
https://www.chromium.org/chromium-os/how-tos-and-troubleshooting/kernel-configuration
https://www.chromium.org/chromium-o...n-snow#TOC-Building-and-installing-the-kernel
Building Chrome OS kernel 4.14
Putting it together - trial & improvement (PC of trial & error)
in bionic chroot
sudo enter-chroot
go to kernel source code (folder where cloned)
$ cd kernel
$ ls chromeos/scripts/
generate-its-script.sh kernelconfig prepareconfig README splitconfig update_smatch_whitelist
challenge - how to generate .config to build kernel - & what are the commands to build it - I know how to with Ubuntu & Arch Linux, even done it a few time for Android Jelly Bean...
scratch - here goes...
from bionic chroot - kernel folder source code kernel/
sh ./chromeos/scripts/prepareconfig chromeos-intel-pineview
sudo modprobe configs; zless /proc/config.gz
cat /proc/config.gz | gunzip > ~/Downloads/base.config
base.config contains all the current configuration of ATB v72 kernel. This file should replace the current file on path kernel/chromeos/config/base.config
Editing base.config - to get extra kernel modules
I use nano
cd ~/Downloads/
nano base.config
it starts like this:
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.14.83 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
...
First change is Apple backlight keyboard replacing where it says is not set by:
CONFIG_BACKLIGHT_APPLE=m
Improving Kernel 4.14.83 from ATB v72 Methodology
Methodology
Extract base.config from FydeOS 5.3.1 (Chromium OS v70) & merge in its settings into base.config extracted from ATB Chromium OS v72...
Busy doing this, as I am not good at coding, so cannot devise an automated script, doing it manually is a long bummer
My comment in Telegram, frustration included -
Modifying kernel basic.config of ATB v72 to incorporate all settings/modules of FydeOS 5.31 (v70) is so tedious, it's a nightmare - I wish there was a way to automate this with a script that merges in FydeOS basic.config entries that are not present in ATB v72 - I am crap at coding & scripting, so doing it manually, it takes forever, & I keep making mistakes :stuck_out_tongue_closed_eyes: - as I am not sure what stops ATB v72 Acer C720P from booting, I have to include all missing settings in basic.config before building the kernel.
Chrome OS Kernel 4.14.96 built with extra modules for ATB v72
It does generate .config after all as usual for Linux kernels - got some issues from enter-chroot - had to do it from Ubuntu bionic proper with (from kernel source folder):
$ sh ./chromeos/scripts/prepareconfig chromeos-intel-pineview
$ make oldconfig
$ make -j4
Just now...
Finished compiling Chrome OS 4.14.96 for ATB v72 (which has Kernel 4.14.83), got vmlinux & modules - now need to find out how to deploy them on a Chrome OS installation...
After some struggle, managed to boot the new kernel as 4.14.96-09859-ga5c3f2f0428a-dirty
installed extra modules
by doing in crosh shell (not chroot)
in kernel compiled source code folder:
$ sudo make modules_install
it creates a new folder /lib/modules/4.14.96-09859-ga5c3f2f0428a-dirty
to get the kernel I just overwrite vmlinuz.A in /dev/sdb12 by kernel/arch/x86/boot/bzImage
(backup vmlinuz.A as vmlinuz.C)
to get to this:
$ mkdir efi
$ sudo mount /dev/sdb12 efi
$ cd efi
$ cd syslinux
$ sudo cp vmlinuz.A vmlinuz.C
$ sudo cp bzImage vmlinuz.A
../..
It boots great on Acer Iconia W700 & MacBook Air mid-2011
the joke is despite modules still no WiFi & no trackpad for MacBook Air
other joke does not boot Acer Chromebook C720P
well at least I tinkered with building this darn Chrome OS kernel - not much documentation on it (apart from how to do this in arm architecture)
Linux localhost 4.14.96-09859-ga5c3f2f0428a-dirty #1 SMP PREEMPT Wed Feb 13 08:04:55 GMT 2019 x86_64 Intel(R) Core(TM) i3-2365M CPU @ 1.40GHz GenuineIntel GNU/Linux
As I do not know how to proceed from this due to lack of Google documentation - I will stop.
I think to get it working, I need to install Chromium OS from scratch, but documentation is unclear, & arnoldthebat has no instructions on how to do this.
So I am starting an effort to build a full Chromium OS from scratch - as
the best way to learn is to share know how.
New thread - https://forum.xda-developers.com/hardware-hacking/chromebooks/chromium-os-building-t3900245
Chromium OS building effort here -
https://forum.xda-developers.com/hardware-hacking/chromebooks/chromium-os-building-t3900245
Rebuilding Chromium OS kernel - a little extra...
Small improvement - removing dirty label from kernel name -
in scripts/setlocalversion # comment out:
if git diff-index --name-only HEAD | grep -qv "^scripts/package"; then
printf '%s' -dirty
fi
will rebuild it again to see if this helps for deployment
Rebuilt successfully - works OK on Acer Iconia W700, including camera & camera migration...
Notes -
in chroot
sudo enter-chroot
in kernel/
sudo make modules_install
sudo make install
outside chroot
in kernel/
sudo mkdir /boot
sudo make modules_install
sudo make install
in ~/Downloads
sudo mount /dev/sdb12 efi
sudo cp efi/syslinux/vmlinuz.A efi/syslinux/vmlinuz.A.83
sudo cp kernel/arch/x86/boot/bzImage efi/syslinux/vmlinuz.A
& for backup
sudo cp efi/syslinux/vmlinuz.A efi/syslinux/vmlinuz.A .96
I think this wraps it up - sadly still not booting Acer CB C720P
Linux localhost 4.14.96-09859-ga5c3f2f0428a #4 SMP PREEMPT Sun Feb 17 11:02:41 GMT 2019 x86_64 Intel(R) Core(TM) i3-2365M CPU @ 1.40GHz GenuineIntel GNU/Linux
Not exactly... always something
Installing Chrome OS Kernel 4.1.4.96 removes crostini, wonder why that is...
solution might be flags - as new kernel, some flags might have been lost
chrome://flags
will check
crostini already there - must be some settings lost with new kernel, or dependencies unmet
NB - all previous commands presuppose you have r/w privilege as root, i.e. issue:
$ sudo mount -o remount,rw /
$ sudo mount -o remount,exec /mnt/stateful_partition
Note - my gripe after all this is that drivers I needed do not seem to load, or I did not select the proper entries in base.config / .config
What's the point of building a kernel if modules cannot be loaded
Google Chrome OS is well protected, & Chromium OS does not seem to bypass kernel protection.
nabil2000 said:
Methodology
Extract base.config from FydeOS 5.3.1 (Chromium OS v70) & merge in its settings into base.config extracted from ATB Chromium OS v72...
Busy doing this, as I am not good at coding, so cannot devise an automated script, doing it manually is a long bummer
My comment in Telegram, frustration included -
Modifying kernel basic.config of ATB v72 to incorporate all settings/modules of FydeOS 5.31 (v70) is so tedious, it's a nightmare - I wish there was a way to automate this with a script that merges in FydeOS basic.config entries that are not present in ATB v72 - I am crap at coding & scripting, so doing it manually, it takes forever, & I keep making mistakes :stuck_out_tongue_closed_eyes: - as I am not sure what stops ATB v72 Acer C720P from booting, I have to include all missing settings in basic.config before building the kernel.
Click to expand...
Click to collapse
hi, how did you extracted fydeos base.config ? if possible, can you provide me with a dropbox link to fydeos 5.3.1 base.config. Thanks
improving kernel 4.14.96
Hello2Clans said:
hi, how did you extracted fydeos base.config ? if possible, can you provide me with a dropbox link to fydeos 5.3.1 base.config. Thanks
Click to expand...
Click to collapse
Here is the dropbox link
[dropbox.com/s/esr407ybr5tev1u/configs.zip?dl=0](https://www.dropbox.com/s/esr407ybr5tev1u/configs.zip?dl=0)
it has the FydeOS 5.3.1 base config I extracted & your ATB v72 which I merged Fydeos 5.3.1 entries into - it updates to 4.14.96 from your 4.14.83 (replace z.config by .config)
It does compile a kernel OK - I did this manually, still learning how to do it signed. As I said details in my XDA thread.
I added all LCD panels modules, maybe it will finally allow to boot Chromebook C720P to GUI.
Oddly, I lose crostini, maybe unsigned kernels do that.
Linux localhost 4.14.96-09859-ga5c3f2f0428a #4 SMP PREEMPT Sun Feb 17 11:02:41 GMT 2019 x86_64 Intel(R) Core(TM) i3-2365M CPU @ 1.40GHz GenuineIntel GNU/Linux
You are welcome to improve on it - it builds, but modules I thought added did not work on MacBook Air nor graphics of Acer CB C720P
Hello2Clans said:
hi, how did you extracted fydeos base.config ? if possible, can you provide me with a dropbox link to fydeos 5.3.1 base.config. Thanks
Click to expand...
Click to collapse
I show how to do it in a previous post - but you need to be in a running FydeOS box, same with ATB.
sudo modprobe configs; zless /proc/config.gz
cat /proc/config.gz | gunzip > ~/Downloads/base.config
.config for Acer CB C720P
Still no luck with Acer Chromebook C720P - tried several changes to .config with make menuconfig & manually - boots to a blank screen still
Fydeos 5.3.1 does not have this problem.
Also tried just the .config of FydeOS on its own, & strangely no luck - there must be something else -
will now try this
# Display Panels
CONFIG_DRM_PANEL_LVDS=y
scratch - learning about kernel blobs /dev/sdx2 & /dev/sdx4
Just building the kernel & forcing in vmlinuz.A in /dev/sdx12 syslinux using bzImage (& modules in /lib/modules)
is apparently not enough...
It seems I also need to generate a new blob for the kernel which is /dev/sdx2
From documentation -
https://chromium.googlesource.com/chromiumos/docs/+/master/kernel_faq.md
we have
Kernel Root
pair A /dev/sda2 /dev/sda3
pair B /dev/sda4 /dev/sda5
in my case (as installed to usb)
Kernel Root
pair A /dev/sdb2 /dev/sdb3
pair B /dev/sdb4 /dev/sdb5
Some pointers here:
https://groups.google.com/a/chromium.org/forum/#!topic/chromium-os-dev/zmaziTddu5E
Major learning curve for me here...
what I need to do is upgrade the Arnoldthebat kernel blob KERN-A (4.14.83) with a new one for the new kernel (4.14.96).
I would appreciate if someone knew how to do this - that might be the cause issue of losing crostini when loading the new 4.14.96 instead of the original ATB.v72 4.14.83 one.
Share knowledge if you know how to do this, thanks.
Cooking -
I just flashed FydeOS 5.3.1 ROOT-A /dev/sdx2 blob which is 16MB over ATB v72 ROOT-A /dev/sdx2 blob which is 64MB & it booted, might be the solution I was looking for...
FydeOS (v70) is more compatible than ATB (v72) for many things. If the blob is involved, then it could be good news, easier than producing a new blob from scratch (don't know how either).
If so, working on blobs is an addition to-do list for hacking Chrome OS.
Hello. I am really glad someone is trying to build and install a custom kernel for ChromiumOS, as it will help fix *many* compatibility issues as well as it will make possible to add support for some hardware and features (for instance, audio over Bluetooth doesn't work as of now because the support library needed for BlueZ isn't included).
My computer isn't working properly and I don't have much space to build the kernel by my own, but I can help with testing and research. If you could share the binaries online (maybe a Git with releases?), this would be great.
What I have found and read about kernel on ChromiumOS so far:
1. Official documentation, it explains about the partition pairs:
http://www.chromium.org/chromium-os/chromiumos-design-docs/disk-format
2. More info (I think you have it already) but I think it is outdated as "console=tty1" doesn't work anymore (ChromiumOS now uses Frecon):
https://chromium.googlesource.com/chromiumos/docs/+/master/kernel_faq.md
3. This is a nice repo, it explains a lot, specially about kernel modules (drivers):
https://github.com/dnschneid/crouton/wiki/Build-chrome-os-kernel-and-kernel-modules
From what I have used and tested, you can use GRIB to either boot from the vmlinuz.A/B image or use the partition with the kernel, using the partition is much complicated as you found out because it would need some blobs/keys.
lfom said:
Hello. I am really glad someone is trying to build and install a custom kernel for ChromiumOS, as it will help fix *many* compatibility issues as well as it will make possible to add support for some hardware and features (for instance, audio over Bluetooth doesn't work as of now because the support library needed for BlueZ isn't included).
My computer isn't working properly and I don't have much space to build the kernel by my own, but I can help with testing and research. If you could share the binaries online (maybe a Git with releases?), this would be great.
What I have found and read about kernel on ChromiumOS so far:
1. Official documentation, it explains about the partition pairs:
http://www.chromium.org/chromium-os/chromiumos-design-docs/disk-format
2. More info (I think you have it already) but I think it is outdated as "console=tty1" doesn't work anymore (ChromiumOS now uses Frecon):
https://chromium.googlesource.com/chromiumos/docs/+/master/kernel_faq.md
3. This is a nice repo, it explains a lot, specially about kernel modules (drivers):
https://github.com/dnschneid/crouton/wiki/Build-chrome-os-kernel-and-kernel-modules
From what I have used and tested, you can use GRIB to either boot from the vmlinuz.A/B image or use the partition with the kernel, using the partition is much complicated as you found out because it would need some blobs/keys.
Click to expand...
Click to collapse
Thanks for the resources, I am getting old, so rather hard to learn & deal with new stuff - tinkering OSes & software is a hobby for me, but I usually do test stuff, not create - I had nice experience with Hackintosh, before I owned my own Macbook Air, still use it from USB's & PC when needed.
So far, I find out blob does not improve matters, it just gets used, like above blob from ATB or FydeOS does same thing.
The way I started in this was just to get Acer Chromebook C720P to load Android, chromefy carried on better than where I started.
The most successful outcome for me is Acer Iconia W700 which works with eve 73 (leaked on Telegram)...
I have the resources to build the kernel - but it is not doing what I want, like booting ATB v72 in Acer CB C720P - it i not vital, C720P works well with FydeOS & cyan or eve 71, just a challenge - why is ATB v72 not booting properly - i's a graphics VESA or LVDS bios issue I believe (C720P board uses LVDS for graphics), but where does it get loaded, I believe it's before loading modules...
FydeOS 5.31 boots to a black screen on my Miix320 but I have to wait until it loads everything then I must hit Ctrl+Alt+F2 then go back to main screen and then it works properly thereafter. Is your Acer the one bellow? Maybe it's related?
http://www.chromebookspecs.com/acer-c720p-chromebook
By the other hand, I cannot enable clicking for the detachable touchpad (+keyboard), what is almost a dealbreaker... Neither it goes to tablet mode when I detach it from the keyboard (not a big deal).
By the other hand, it boots correctly on a ThinkPad 8 tablet, but if freezes after a few seconds unless I use acpi=off or noacpi as kernel parameters, what makes it usesless since it only detects USB hardware.
From the text I linked it seems that the extra data added to the kernel before flashing it to a disk partition is both its signature and kernel paramenters, so you may want to check if there is any special paramenter needed for the kernel to boot correctly on your C720P.
FydeOS base upgrading kernel from 4.14.67 to 4.14.96
Kernel 4.14.96 upgrade progress -
I allowed
CONFIG_TCG_VTPM_PROXY=m
in .config
& this allowed me to update a chromefied FydeOS with eve/caroline 71 to eve 73 dev by using chromefy2!
this in turn allowed me to use an edimax Wifi USB dongle in MacBook Air -
the onboard WiFi still not loading, no trackpad but still progress :relaxed:
so modules do get loaded unlike my concern, it's just a matter to identify the proper entry in .config to load them when compiling the kernel...
now what are the proper entries for internal WiFi & trackpad?
Extra - Icing on the cake -
FydeOS 5.3.1 with eve dev 73 - putting the correct files in place allows to load kernel 4.14.83 & its modules to get crostini -
of course loading FydeOS kernel which is 4.14.67 stops Android 9.
This amended chromefy.sh script might help with MacBooks for trackpad & WiFi.
https://github.com/youngyou/chromefy/blob/master/chromefy.sh
*** Important note ***
To install the kernel modules in the Chrome OS box, you need to install Chromebrew to have access to the necessary commands -
$ curl -Ls http://git.io/vddgY | bash
In kernel source code folder:
$ sudo make modules_install
then copy bzImage over vmlinuz.A (after backing up the original)
I am planning to release an archive with kernels & modules including the one I built, it will be
vmlinuz.A.67(4.14.67); vmlinuz.A.83 (4.14.83); vmlinuz.A.96 (4.14.96); & corresponding /lib/modules folder
FydeOS 5.3.1 - ATB v72 - my built kernel
Notes -
Kernel 4.14.96 upgrade progress - I allowed CONFIG_TCG_VTPM_PROXY=m so this allowed me to update a chromefied FydeOS to eve 73 dev by using chromefy2! this in turn allowed me to use an edimax Wifi USB dongle in MacBook Air - the onboard WiFi still not loading, no trackpad but still progress :relaxed:
Icing on the cake - FydeOS 5.3.1 with eve dev 73 - putting the correct files in place allows to load kernel 4.14.83 & its modules to get crostini - of course loading FydeOS kernel which is 4.14.67 stops Android 9.
Cool progress - I managed to boot to the GUI of Acer CB C720P with eve dev v73 - still need to iron out something, but could get into guest mode, & to linux prompt - this is great :stuck_out_tongue_winking_eye: this is using kernel 4.14.83 on top of FydeOS 5.3.1
Finally managed to log into my google account in Acer CB C720P- next hurdle, will Android 9 work? - crostini back in the menu -
hurdle - despite changing vmlinuz.A to 4.14.83 or 4.14.96 - it still only loads FydeOS 4.14.67
so
I learnt something new, which means I need to learn more -
when you boot to a real chromebook from usb or internal, it will look for the kernel in the blob KERN-A /dev/sdx2, & will not use the vmlinuz.A in /dev/sdx12 -
so with FydeOS stuck with kernel 4.14.67 -
if I boot from other laptop, blob is not used, vmlinuz.A instead -
so I need to produce new KERN-A /dev/sdx2 blob for new kernel,
FydeOS blob is 16MB, ATB v72 blob is 64MB,
so to flash I need to play with partitions, tricky, & did not work...
still didn't figure out how to make a new blob for a new kernel...
RFC - how to produce a blob for loading a new kernel?
RFC - how to produce a blob for loading a new kernel?
If there is a way to find out how to produce a blob of an updated kernel for a genuine vanilla chromebook such as Acer Chromebook C720P - I will post it here...
Google open source documentation is very confusing about this - it might also be generated when setting up a Chromium OS from scratch (my thread on this is halted for now, but I have all the setup foundation to build)...
What I gather is that vmlinuz.A is the kernel, but for chromebooks, the kernel is also contained in the blob which is in partition /dev/sdx2 labelled KERN-A -
so I need to produce an image kern-a.bin which I then flash to /dev/sdx2 - with FydeOS 5.3.1 the KERN-A blob contains Kernel 4.14.67, with ATB v72 Kernel 4.14.83...
the dilemma is that KERN-A size for FydeOS 5.3.1 is 16 MB & for ATB v72 it is 64MB, so I cannot flash the latter onto the former.
I need to find out how to create a 64MB image for KERN-A from a given kernel, such as ATB v72 or my compiled one which is 4.14.96 -
Anyone who has a clue, & better has the correct instructions to do so, please help...
Actually, you don't need to: you can use the compressed image with GRUB2, and it will boot using your system and state (data) partition.
lfom said:
Actually, you don't need to: you can use the compressed image with GRUB2, and it will boot using your system and state (data) partition.
Click to expand...
Click to collapse
Using a modified FydeOS 5.3.1 as base, no matter I change the kernel, it boots its own 4.14.67 kernel on Acer CB C720P - however using non chromebook devices such as macbook, allow me to boot vmlinuz.A & its associated /lib/modules/...
Care to share how to use grub2 to override the above?

Building arm64-v8a ndk toolchain to run on device

Now I know I've done this before. But I think I had to make an entire Application.mk file. I am trying to use either the Windows or Linux NDKr19 to build a standalone toolchain that contains ONLY the arm64 executable binaries. (essentially "aarch64-android-android" or "aarch64-android-arm64-v8a")
EDIT: So I'm dumb and figured it out. I've attached the binaries that can run on the device.

Categories

Resources