i feel like breaking down at this Point
so where do i start i unlocked the bootloader and then downloaded the unofficial twrp, the rom i wanted to use didn't install because it was made for the official twrp got error 7 so i reflashed the official twrp to install it again but was unable to move any files and adb sideload failed something about using an old version this after it was stuck in starting sideloading feature (it failed when i tried to use commands) (even tried the sdk didn't work) so i wen't back to the unofficial twrp to install lineage apperantly this was an invalid format, so i wen't back to the official one again to try the first rom adb didn't work so i wen't back to the unofficial one, the one that did work was this one (i've reflashed recoveries over 6 times now including formatted in every conceivable way several times did i break it?
https://forum.xda-developers.com/mate-10/development/roms-openkirin-aosp-collection-t3828792
it installed completely fine
then i wen't to gapps
"insufficient space" even though it's pico and the phone is empty
then i tried to reboot i got the warning that no os is installed so i rebooted again reflashed the rom Everything wen't fine still no os installed warning this time i rebotted to system and just got a bootloop eventually emui offered to factory reset
so here i am now i can't flash any kind of rom and the more i try things the more i seem to break.
lineage unsupported format
aosp 9.0 error 7 (removing asset just made a new error about not finding update binary even though it's there
kirin treble installs fine but no os installed warning and bootloop
i used the dcunlocker Method so installing stock recovery or stock emui seems risky to me as it might relock the bootloader.
i am also unable to format either getting error 1 or 255 "can't format to remove encryption" and it still bootloops despite the rom installing fine
edit it finally worked to flash aosp 9.0 but then it got stuck on the Android setup screen looking for an update forever so i tried to enter twrp which ofcourse doesn't work on custom roms so i reflashed the official twrp which does work but now i can't put any files on the phone so i am trapped, sideloading does not work i just get an error that i use an outdated adb and on my pc the error says protocol fault protocol fault (no status)
so i can't put any files in it i can't do anything what i can do is reflash the custom twrp and get file transfer back but as soon as i flash Android pie again suddenly that twrp will no longer work so i am stuck completely
it's just not possible to fix this it's impossible no matter what i try it keeps giving all kinds of various errors i can't take it any more
Related
I have an xt912.
I started with the Droid Razr utility by mattlgroff. I ran step one, three, and four to flash a stock rom to the device, root it and finally to install safestrap 3 to the device. From here I pushed a stable release of cyanogen and gapps. The packages that I pushed to the device are cm-10.2.1-spyder.zip and gapps-kk-20140606-signed.zip. I then managed to flash these packages from twrp. However I ran into status 6 a couple of times with different releases.
My keyboard process stops working as soon as the phone boots. I've tried re-flashing cyanogen and gapps. If I do a factory reset followed by a system wipe and then flash cyanogen without gapps my keyboard is fine; however I no longer have access to the play store or anything of the such.
Cyanogen tells me that there is a new update. I can download the update just fine but when I try to flash it through recovery twrp gives a status 6 and fails to flash. When I try to flash a different release of gapps, twrp also gives a status 6 and fails to flash.
A couple of odd bits.
My phone does not have a service provider but I still have the lte sim from verizion.
I pushed the files to /sdcard/ without an sd card in the phone. From what I understand it pushed it to internal storage.
The version of twrp is 2.2.2.1
When I was running the utility it would have trouble detecting my device after a reboot. I would have to unplug and re plug after the reboot for it to recognize it. The phone wouldn't recognize it either until i did the same. The battery icon wouldn't show it connected.
So, what can I do about the status 6 or what causes it and what can I do about the failing keyboard process?
It downloads, reboots and tries to install the latest Oxygen update but fails and asks for a reboot.
At one point I installed Kingroot but removed it afterwards. My phone is also encrypted if that matters.
Thanks
having the same problem with my gf's phone...... was a 1003 model if i remember correct.... recovery just had an "Update Failed" and nothing else.... even flashing the full package failed........ i'm considering installing TWRP and going from there but i'd like to avoid that if possible
I am hoping someone can lead me in the right direction. I tried to update my LGV521 with LGUP using the uppercut way. I updated to file V52120f_00_1209.kdz and installed TWRP, rooted and installed SU. I kept getting an android system error so I stupidly did a system restore and now I cannot get out of TWRP. I have tried flashing Lineage OS, iPioneer and a stock rom and nothing works, I always reboot back into TWRP. I cannot get LGUP to recognize my device, I have tried updating the drives nothing has worked for me so far. My computer recognizes my device as b3 TARGET_DEVICE.
also not sure if its related, but I cannot get TWRP to mount my external SD card.
I have browsed to see if anyone else has had similar issues but I havent been able to find anything that works for me unfortunately. This isn't my first time rooting, but I also am not a pro.
I had an issue where my tablet kept going into TWRP after updating LineageOS, the commands on this post worked:
https://forum.xda-developers.com/showpost.php?p=73358490&postcount=201
I unlocked the bootloader and rooted the phone, and flashed with resurrected remixed 8.1
Everything seemed good, but trying to install gapps would fail. Everytime I try to flash something it fails, gapps worked once but did not install play services.
I've never had some many problems, the phone does not have a sdcard. ROM manager is installed, and connected to wifi, but it cannot update, does not say why. I tried to get TWRP to work, now it says the phone is not rooted.
I flash SuperSU-v2.82-201705271822, it says success but there is no super user. SU when I run it says it is occupied.
Tried to wip cache etc, and flash stock or lineage, error 7. Tried to remove assert in the update script, than gives a error about footer.
I know I must be missing something. RR Oreo 8.1, no web browser, going to download and move via usb and install. Any suggestions are welcome.
Hello everyone,
I have made some mistakes:
I installed lineage os yesterday, everything worked well, installed some apps, and installed an app (banking app I didn't trusted), so I decided to make a reboot.
I probably didn't made a "clean" reboot. I just went into TWRP and wiped all folders, thinking to then install the OS again.
Thing is, when installing Lineage now I only get "error 7" and changing the Assert line in the zip, changes nothing. I tried to flash another ROM, "Light Rom" on the phone successfully, but it didn't started anymore and went into reboot loop.
I'm now a bit lost, since it was the first flash I did (hich was successfull the first time but I probably screwed up the second time.
Before every Flash, I always clean the Dalvik, Cache, Data and System folder.
I hace the latest TWRP Version, and also made sure to download the latest Lineage version.
What can I do now?
I'm flashing with Odin
When Trying to flash the normal Samsung firmware, I get the error msg:
SW Rev. Check Fail (Bootoader) Device: 12 Binary: 7
I also have no recovery. I know, I have probably done everything wrong I coould do wrong XD, this is going to be a lesson having no backup...
Can I even do something with the phone tho? Or is it just dead now and unusable?
Deleted member 11382503 said:
Hello everyone,
I have made some mistakes:
I installed lineage os yesterday, everything worked well, installed some apps, and installed an app (banking app I didn't trusted), so I decided to make a reboot.
I probably didn't made a "clean" reboot. I just went into TWRP and wiped all folders, thinking to then install the OS again.
Thing is, when installing Lineage now I only get "error 7" and changing the Assert line in the zip, changes nothing. I tried to flash another ROM, "Light Rom" on the phone successfully, but it didn't started anymore and went into reboot loop.
I'm now a bit lost, since it was the first flash I did (hich was successfull the first time but I probably screwed up the second time.
Before every Flash, I always clean the Dalvik, Cache, Data and System folder.
I hace the latest TWRP Version, and also made sure to download the latest Lineage version.
What can I do now?
I'm flashing with Odin
When Trying to flash the normal Samsung firmware, I get the error msg:
SW Rev. Check Fail (Bootoader) Device: 12 Binary: 7
I also have no recovery. I know, I have probably done everything wrong I coould do wrong XD, this is going to be a lesson having no backup...
Can I even do something with the phone tho? Or is it just dead now and unusable?
Click to expand...
Click to collapse
You get the 'SW Rev. Check Fail (Bootoader) Device: 12 Binary: 7' thing because you're trying to flash a older firmware, you can't downgrade.
Use samfirm or frija to download the latest stock rom of your csc.
And you got error 7 because u are using twrp 3.4 or 3.5, read first, flash after. Rom devs recommend twrp 3.3.1.0/.1