I have an xt912.
I started with the Droid Razr utility by mattlgroff. I ran step one, three, and four to flash a stock rom to the device, root it and finally to install safestrap 3 to the device. From here I pushed a stable release of cyanogen and gapps. The packages that I pushed to the device are cm-10.2.1-spyder.zip and gapps-kk-20140606-signed.zip. I then managed to flash these packages from twrp. However I ran into status 6 a couple of times with different releases.
My keyboard process stops working as soon as the phone boots. I've tried re-flashing cyanogen and gapps. If I do a factory reset followed by a system wipe and then flash cyanogen without gapps my keyboard is fine; however I no longer have access to the play store or anything of the such.
Cyanogen tells me that there is a new update. I can download the update just fine but when I try to flash it through recovery twrp gives a status 6 and fails to flash. When I try to flash a different release of gapps, twrp also gives a status 6 and fails to flash.
A couple of odd bits.
My phone does not have a service provider but I still have the lte sim from verizion.
I pushed the files to /sdcard/ without an sd card in the phone. From what I understand it pushed it to internal storage.
The version of twrp is 2.2.2.1
When I was running the utility it would have trouble detecting my device after a reboot. I would have to unplug and re plug after the reboot for it to recognize it. The phone wouldn't recognize it either until i did the same. The battery icon wouldn't show it connected.
So, what can I do about the status 6 or what causes it and what can I do about the failing keyboard process?
Related
I have Samsung Vibrant T959. Currently has clockworkmod 6.0.3.6 .
I'm trying to install the latest unofficial cyanogenmod 11, which will install kitkat 4.4.4, however I run into the error message "set_metadata_recursive: some changes failed" . According to my research all I need to do to solve it is update clockworkmod to a version of at least 6.0.4.5 .
I've searched all over, most sources point towards using rom manager, but this is not working. Rom manager seems to think the latest version is 2.5.1.2. The official clockworkmod site also lists 2.5.1.2 as the latest version for my phone.
So how do I upgrade this clockworkmod so that I can install kitkat? I know others have done it, but I can't find any info how.
Thanks.
I just installed Sada's 4.4.4 today (coming from the official CM 11 [4.4.2]) and what I did was go into CWM and install the rom (which will fail). During the process it will install CWM 6.0.4.9. Reboot. Now you will have 6.0.4.9.
FYI - I had to reformat the internal SD card to get the 4.4.4 install to stick. (factory reset and clearing caches wasn't enough and would throw errors on first boot)
-Mike
Thanks for the advice. Thats the exact thing I was doing. Coming from latest official Cyanogenmod, to the latest unofficial.
So I did exactly what you said, tried to install, it failed, rebooted straight from recovery back into recovery, and I indeed had clockworkmod 6.0.4.9.
So I did the install again, it worked, installed the minimal gapps, but I did not format the SD card. I figured I would try without it first.
Well upon booting I couldn't get past the first screen of the setup wizard, it would just crash. Had a very difficult time getting back into recovery mode, as the typical 3 button combo wouldnt work, but finally figured out a way by sheer luck and experimentation (hold volume down, and power, and plug in a usb cord. Keep the buttons held for about 30 seconds, then release the power button while still holding volume down, after 10 seconds it would go to recovery)
So I did the format of the internal SD card as well, but no luck, the wizard still crashes. Ended up just restoring my old nandroid. I wonder if there was anything else you did different than me. Perhaps different Gapps?
Hello, this isn't life or death, as this isn't my daily driver, but I do use this phone at lunchtime when I'm at the gym on Wifi and it's always worked well for me. Here are the issues somewhat chronologically:
1) I was on CM10 and have always had connectivity issues with Exchange Server email, so I decided to update to the latest CM11 in the hope that that issue would be resolved.
2) I decided to go to ROM Manager and update the Clockwork Mod Recovery, because I'd had some issues with the Philz Touch V. 6 that was already on there. This was probably my first mistake.
3) When I rebooted into recovery, inexplicably Philz Touch came back up instead of Clockword Mod.
4) I performed a factory reset and went ahead and attempted to flash the newer CM11 and the Gapps like I usually would. After that it's been nothing but problems.
5) Ever since then, I've only been able to make it to the White HTC Screen- the OS won't load up.
6) I can get back into the bootloader and recovery, but can't seem to flash any other recovery (I've tried through HBOOT and installing a recovery zip (always renaming all the images as PJ35IMG.zip)
7) every time I get some kind of error message in HBOOT: aborted "no image" ; "bad" "status 7" ; "status 0" etc
8) This is further compounded because I can't get ADB to recognize the device (USB won't even recognize the device); which I suspect is due to it not booting to the OS, so I can't use Fastboot/ADB commands
9) I've searched and attempted pretty much every fix I could find- I even ran the RUU img (which I renamed to the zip file above) and that made it a little further in the process and actually made it a little further before it aborted (can't run the normal RUU.exe because USB doesn't recognize my phone) Also tried deleting the assert lines in attempts to deal with the Status 7 error. I've also re-formatted my SD card, to no avail.
10) So in summing up, basically my bootloader won't flash any images (always gives "no image" error); and my recovery won't fully install any zip file (neither alternate recoveries nor ROMs (always aborts) (However Gapps does install successfully)
11) I wasted a full day trying all this yesterday, so before I give up completely, just wanted to see if anyone out there might have a fix that has eluded me. I apologize for being so long-winded- I just wanted to get everything in there to see if it would help. Thanks in advance.
I unlocked the bootloader and rooted the phone, and flashed with resurrected remixed 8.1
Everything seemed good, but trying to install gapps would fail. Everytime I try to flash something it fails, gapps worked once but did not install play services.
I've never had some many problems, the phone does not have a sdcard. ROM manager is installed, and connected to wifi, but it cannot update, does not say why. I tried to get TWRP to work, now it says the phone is not rooted.
I flash SuperSU-v2.82-201705271822, it says success but there is no super user. SU when I run it says it is occupied.
Tried to wip cache etc, and flash stock or lineage, error 7. Tried to remove assert in the update script, than gives a error about footer.
I know I must be missing something. RR Oreo 8.1, no web browser, going to download and move via usb and install. Any suggestions are welcome.
i feel like breaking down at this Point
so where do i start i unlocked the bootloader and then downloaded the unofficial twrp, the rom i wanted to use didn't install because it was made for the official twrp got error 7 so i reflashed the official twrp to install it again but was unable to move any files and adb sideload failed something about using an old version this after it was stuck in starting sideloading feature (it failed when i tried to use commands) (even tried the sdk didn't work) so i wen't back to the unofficial twrp to install lineage apperantly this was an invalid format, so i wen't back to the official one again to try the first rom adb didn't work so i wen't back to the unofficial one, the one that did work was this one (i've reflashed recoveries over 6 times now including formatted in every conceivable way several times did i break it?
https://forum.xda-developers.com/mate-10/development/roms-openkirin-aosp-collection-t3828792
it installed completely fine
then i wen't to gapps
"insufficient space" even though it's pico and the phone is empty
then i tried to reboot i got the warning that no os is installed so i rebooted again reflashed the rom Everything wen't fine still no os installed warning this time i rebotted to system and just got a bootloop eventually emui offered to factory reset
so here i am now i can't flash any kind of rom and the more i try things the more i seem to break.
lineage unsupported format
aosp 9.0 error 7 (removing asset just made a new error about not finding update binary even though it's there
kirin treble installs fine but no os installed warning and bootloop
i used the dcunlocker Method so installing stock recovery or stock emui seems risky to me as it might relock the bootloader.
i am also unable to format either getting error 1 or 255 "can't format to remove encryption" and it still bootloops despite the rom installing fine
edit it finally worked to flash aosp 9.0 but then it got stuck on the Android setup screen looking for an update forever so i tried to enter twrp which ofcourse doesn't work on custom roms so i reflashed the official twrp which does work but now i can't put any files on the phone so i am trapped, sideloading does not work i just get an error that i use an outdated adb and on my pc the error says protocol fault protocol fault (no status)
so i can't put any files in it i can't do anything what i can do is reflash the custom twrp and get file transfer back but as soon as i flash Android pie again suddenly that twrp will no longer work so i am stuck completely
it's just not possible to fix this it's impossible no matter what i try it keeps giving all kinds of various errors i can't take it any more
Hello everyone,
I have a Mi 8 Lite running MIUI 20.1.21v10-11 and I noticed today that I can't delete or move files in "Files" - the MIUI file manager. I noticed some time ago that my permissions were reset or something because some apps were asking about permissions for this or that. How should I go about fixing this? Is it an issue with permissions or is it an issue with my SD card. I tried downloading a few times via Chrome the update on my phone but the phone would freeze up during the download and I would have to reboot.
Next issue is that for a few updates now, if I put the call on speaker or I use my bluetooth headphones, people say that can hear themselves. I've read up that several people had problems with this but I still don't know what the real issue is and how to go about fixing this issue. I did not have this problem before or when I first bought the phone so it can't be a hardware problem, right?
https://www.getdroidtips.com/android-10-xiaomi-mi-8-lite/
Try to install the latest rom from here.
Be carefull. Install the rom using your recovery. I recomend pith black recovery latest version you can get it from here : https://www.google.com/amp/s/forum....nt/recovery-fork-twrp-mi-8-lite-t3965708/amp/
That recovery support ota update.
Don't wipe anythng if you are on a stock rom. Just flash the ZIP update .
If you want to root your phone.. After flashing the rom..
Don t flash yet magisc. Boot the phone. Let the phone finish the update. Then boot again recovery. Flash magisc 20.3 and reboot your phone. Wait for 2-3 minutes. It won't boot. Don't worry go again at recovery and format your data. At the wipe tab tap format data. After that go and reboot your device. It will Take a while so be patient. When the phone boot's finish the setup wizard and Then you can see the magisc îs installed and you got root. Read carefully. And fallow the steps i said. Don't miss something. Don't try to install the rom with mi flash tool. It's. A recovery rom. Not fast boot rom. Good luck, ?