Hy Community,
My Poco arrived today 6GB Ram 128 Storage. Just took it out and turned it on without no Sim card.
I'm on Miui version 9.6.11.0 and there would be a Update available to 9.6.22.0.
Before I do anything with the Poco iv ends ask you guy's what to do first.
Open Bootloader?
Flash TWRP?
Flash any Custom ROMs?
I followed some other threats the last week for open BL, flash TWRP etc. But I'm kinda scared to f.... My new Poco up because some Ways they distcribe to flash this or that is kinda scary and people writing they got bootlooped and I don't wanna be like that.
Should I stay with the Stock Recovery and Stock ROM till the development get more stable and secure?
I read in one threat LOS is about to get published in a view days.
Any advice and secure step by step explanation about flashing would be appreciated.
Thank you guy's for any feedback.
Happy safe flashing
thechosenone43 said:
Hy Community,
My Poco arrived today 6GB Ram 128 Storage. Just took it out and turned it on without no Sim card.
I'm on Miui version 9.6.11.0 and there would be a Update available to 9.6.22.0.
Before I do anything with the Poco iv ends ask you guy's what to do first.
Open Bootloader?
Flash TWRP?
Flash any Custom ROMs?
I followed some other threats the last week for open BL, flash TWRP etc. But I'm kinda scared to f.... My new Poco up because some Ways they distcribe to flash this or that is kinda scary and people writing they got bootlooped and I don't wanna be like that.
Should I stay with the Stock Recovery and Stock ROM till the development get more stable and secure?
I read in one threat LOS is about to get published in a view days.
Any advice and secure step by step explanation about flashing would be appreciated.
Thank you guy's for any feedback.
Happy safe flashing
Click to expand...
Click to collapse
Unlocked bootloader with twrp and Xiaomi.eu all the time for Xiaomi devices according to me, I've had 8 different Xiaomi devices and tried, stock, globe rom, miui.it and a bunch of others.
Unless you hate Xiaomi interface there aren't any options at the moment but until you have more to choose from I would suggest xiaomi.eu.
I've copied what they have included or tweaked compared to stock Rom.
ROMs features (Whats not in Global):
Based on China Stable / Weekly builds (except HMNote3SE, POCOF1)
Enabled search gesture (swipe up) on the desktop
3way reboot menu
Removed ads in system apps
Face Unlock for all 7.x/8.x/9.x devices
Vertical clock widget on lockscreen
Steps counter in Assistant screen
More shortcuts on left lockscreen
Wake up gestures for 7.x/8.x/9.x devices
AI preloading option in MIUI Lab
Fullscreen gestures for 7.x/8.x/9.x devices
Option to auto-expand first notification
Notifications priority settings
More edit options in Gallery app
Enabled MiDrive in File Explorer
Added landscape mode for SMS app
Sunrise/Sunset in the weather app
Google apps support integrated
Importing theme from zhuti.xiaomi.com via ThemeManager
No useless Chinese bloatware apps
More free RAM due to less background processes
Unified flat style app icons for both system and 3rd party apps (eg. Play Store icon flat too, unlike official global MIUI)
Advanced menu with color icons (not just text like in official MIUI releases)
No any Chinese character under the full system
Mi Video, Mi Music, Mi Browser: No any useless Chinese content
No possibility to re-lock bootloader accidentally with flash any xiaomi.eu release
Added real 27 languages translation made by Official MIUI Fansites and MIUI Fans
Added EU T9 dialer support
Added charging sound switch
Added Spell Checker switch
Added Screen-OFF animation
Added AI Preload for 8.x/9.x devices
Optimized GPS settings for EU
Optimized Battery consumption
Optimized RAM consumption
Added 4k Video support for MI4C, MI4S, HMNote3Pro, HMNote3SE, HMNote4X
Added 3D Touch to MI5S 3GB RAM version
Added GSMalphabet into SMS app
Added more icons grid layout 4x5, 4x6, 4x7, 5x5, 5x6, 5x7 (depends on device)
SafetyNet passed (Google Pay)
Play Store Certified
Deodexed
Added automated tasks
Added game speed booster
Added erase module (magic elimination) to Gallery photo edit options
Fixed low volume sound via headphone
Fixed Google assistant voice response issue
And more, and more made by our 5 years MIUI mods experience.
Skickat från min POCOPHONE F1 via Tapatalk
---------- Post added at 08:39 PM ---------- Previous post was at 08:36 PM ----------
Unlocking bootloader is straightforward.
Regarding twrp I followed this and it worked perfectly for flashing twrp.
https://r.tapatalk.com/shareLink?ur...share_tid=3836241&share_fid=3793&share_type=t
Skickat från min POCOPHONE F1 via Tapatalk
---------- Post added at 08:41 PM ---------- Previous post was at 08:39 PM ----------
Oh and after that I flashed this twrp so Microsd access works.
https://r.tapatalk.com/shareLink?ur...share_tid=3836241&share_fid=3793&share_type=t
Skickat från min POCOPHONE F1 via Tapatalk
Zeggi said:
Unlocked bootloader with twrp and Xiaomi.eu all the time for Xiaomi devices according to me, I've had 8 different Xiaomi devices and tried, stock, globe rom, miui.it and a bunch of others.
Unless you hate Xiaomi interface there aren't any options at the moment but until you have more to choose from I would suggest xiaomi.eu.
I've copied what they have included or tweaked compared to stock Rom.
ROMs features (Whats not in Global):
Based on China Stable / Weekly builds (except HMNote3SE, POCOF1)
Enabled search gesture (swipe up) on the desktop
3way reboot menu
Removed ads in system apps
Face Unlock for all 7.x/8.x/9.x devices
Vertical clock widget on lockscreen
Steps counter in Assistant screen
More shortcuts on left lockscreen
Wake up gestures for 7.x/8.x/9.x devices
AI preloading option in MIUI Lab
Fullscreen gestures for 7.x/8.x/9.x devices
Option to auto-expand first notification
Notifications priority settings
More edit options in Gallery app
Enabled MiDrive in File Explorer
Added landscape mode for SMS app
Sunrise/Sunset in the weather app
Google apps support integrated
Importing theme from zhuti.xiaomi.com via ThemeManager
No useless Chinese bloatware apps
More free RAM due to less background processes
Unified flat style app icons for both system and 3rd party apps (eg. Play Store icon flat too, unlike official global MIUI)
Advanced menu with color icons (not just text like in official MIUI releases)
No any Chinese character under the full system
Mi Video, Mi Music, Mi Browser: No any useless Chinese content
No possibility to re-lock bootloader accidentally with flash any xiaomi.eu release
Added real 27 languages translation made by Official MIUI Fansites and MIUI Fans
Added EU T9 dialer support
Added charging sound switch
Added Spell Checker switch
Added Screen-OFF animation
Added AI Preload for 8.x/9.x devices
Optimized GPS settings for EU
Optimized Battery consumption
Optimized RAM consumption
Added 4k Video support for MI4C, MI4S, HMNote3Pro, HMNote3SE, HMNote4X
Added 3D Touch to MI5S 3GB RAM version
Added GSMalphabet into SMS app
Added more icons grid layout 4x5, 4x6, 4x7, 5x5, 5x6, 5x7 (depends on device)
SafetyNet passed (Google Pay)
Play Store Certified
Deodexed
Added automated tasks
Added game speed booster
Added erase module (magic elimination) to Gallery photo edit options
Fixed low volume sound via headphone
Fixed Google assistant voice response issue
And more, and more made by our 5 years MIUI mods experience.
Skickat från min POCOPHONE F1 via Tapatalk
---------- Post added at 08:39 PM ---------- Previous post was at 08:36 PM ----------
Unlocking bootloader is straightforward.
Regarding twrp I followed this and it worked perfectly for flashing twrp.
https://r.tapatalk.com/shareLink?ur...share_tid=3836241&share_fid=3793&share_type=t
Skickat från min POCOPHONE F1 via Tapatalk
---------- Post added at 08:41 PM ---------- Previous post was at 08:39 PM ----------
Oh and after that I flashed this twrp so Microsd access works.
https://r.tapatalk.com/shareLink?ur...share_tid=3836241&share_fid=3793&share_type=t
Skickat från min POCOPHONE F1 via Tapatalk
Click to expand...
Click to collapse
Wow thanks allot for your effort.
All though pretty much for me. I'm not a newbi with flashing and all just don't wanna **** up my Poco.
Maybe I try to get that BL and TWRP thing working first. Hopefully development making progress the next days.
Thank you mate and if im in trouble with my Poco hopefully I can get back at you ?
Yeah, just post in this thread so more can help, if you will need any more help.
Good luck.
I would suggest you download latest weekly from Xiaomi.eu, I belive it's 9.20 (based on date) and save it to phone, also check md5 sum before flashing, are a few apps in playstore to use.
Also download twrp Microsd img version to phone so once you in twrp you simply flash twrp img and reboot to recovery.
After that you have access to Microsd.
Once you decide to flash rom, remember to wipe factory reset before and after that flash desired rom.
First boot of twrp it will ask for password, just press cancel and choose not to modified system.
That's that, good luck! [emoji256]
Skickat från min POCOPHONE F1 via Tapatalk
Zeggi said:
Yeah, just post in this thread so more can help, if you will need any more help.
Good luck.
I would suggest you download latest weekly from Xiaomi.eu, I belive it's 9.20 (based on date) and save it to phone, also check md5 sum before flashing, are a few apps in playstore to use.
Also download twrp Microsd img version to phone so once you in twrp you simply flash twrp img and reboot to recovery.
After that you have access to Microsd.
Once you decide to flash rom, remember to wipe factory reset before and after that flash desired rom.
First boot of twrp it will ask for password, just press cancel and choose not to modified system.
That's that, good luck! [emoji256]
Skickat från min POCOPHONE F1 via Tapatalk
Click to expand...
Click to collapse
... And do I have to flash this decrypt zip file I read somewhere before flashing Roms and right before booting afterwards? Because TWRP cannot encrypt it.... Correct me please
Yes you have to. But I'm flashing it only after miui. It also has magisk build in so you will have root
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
uremytoy said:
Yes you have to. But I'm flashing it only after miui. It also has magisk build in so you will have root
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
Click to expand...
Click to collapse
So but nothing wrong when i flash it in xiaomi.eu or other non Miui Rom?
I don't know you must check [emoji16] I haven't flashed anything after xiaomi.eu. maybe it removes that encryption and you don't have to flash anything at all after it. It's second xiaomi.eu build for our phone and first one was buggy. Other than that I would just flash fde just because it has magisk so it's like 2 in 1 zip which I personally like. What I know for sure that after flashing any official miui ROM or beta ROM for now you have to flash fde, so probably your answer is yes
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
uremytoy said:
I don't know you must check [emoji16] I haven't flashed anything after xiaomi.eu. maybe it removes that encryption and you don't have to flash anything at all after it. It's second xiaomi.eu build for our phone and first one was buggy. Other than that I would just flash fde just because it has magisk so it's like 2 in 1 zip which I personally like. What I know for sure that after flashing any official miui ROM or beta ROM for now you have to flash fde, so probably your answer is yes
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka[/QUOTE
Fde? Where can i find that?
Click to expand...
Click to collapse
It's that decrypt zip. Force decrypt enabler if I remember correctly
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
thechosenone43 said:
... And do I have to flash this decrypt zip file I read somewhere before flashing Roms and right before booting afterwards? Because TWRP cannot encrypt it.... Correct me please
Click to expand...
Click to collapse
I never installed it and my phone works perfectly fine.
Skickat från min POCOPHONE F1 via Tapatalk
Off it will. You just don't have twrp anymore
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
Well the Decrypt file is if you wish to manipulate /data partition as I understand it.
For example if you wish to install, treble based roms.
Who knows maybe I forgotten that I flashed it but I'm 99.9% sure I never installed it.
Skickat från min POCOPHONE F1 via Tapatalk
During boot you will get message like: please wait while encrypting data or something like that. If you didn't than you have flashed zip
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
Related
Hello All!!
Thanks a ton for the support from you all..
H2OS v16 IS HERE
UPDATE LOG:
Size: 1.12G
Version: Thirteenth Edition
Time: Feb 27, 2016
MD5: 73B6E85891A7331B2886E5939A1033F2
Update Log
New
- Plus gold tone to add a sound ear, enjoy even better music experience.
optimization
- Optimization dialpad contact Lenovo Pinyin order.
- Part of the scene to repair the program Caton problem.
- Repair of low probability into the camera fail.
- Repair of the scene charging too slow.
- Clean up after the repair problem files, preview does not display the gallery.
- Repair the right slide lock screen notification, no problem entering the fingerprint to unlock the application.
Click to expand...
Click to collapse
H2OS VERSION : V1.2.0
ANDROID VERSION: 5.1.1
Size : 1.12G Version:
Twelfth Edition
Time : Feb 1, 2016
MD5: 6FC5B9D93D3E08C25CC0A046167D6D99
Update log
Added
- New Gallery , photo editing , graffiti , collecting a range of features .
- A plus notes, records readily sentiment , and elegant way to share.
- Management Center , cleaning, interception , permissions, dormant , in control .
- Button light switch function , when the happy open , when unhappy off.
- Weather increase the air quality index, please pay attention to outdoor air quality.
- Desktop Search Add keyboard text input , and optimize the results of sorting logic .
Optimization
- Dial Interface decline Collapse dial.
- Optimization of speed front and rear camera switching.
- Optimization of application dormancy mechanism to address the problem of application stuck .
- Optimization of power display , solve the problem of part of the scene are not allowed to charge .
- Move to the main menu system update , check for updates and more convenient.
- To repair the holster mode automatic shutdown failure.
- Fixed part of the card information is not displayed card problems.
- Fixed problems gesture probabilistic black music is not responding .
- After the repair OTA upgrade , some scenes information flash back problems.
- Fixed switching probability of call silent question in the calls .
- Repair repeatedly inserted into the headphone volume may lead to media questions can not be adjusted .
- Repair unread messages , missed calls Desktop icon probabilistic dynamic display problem exceptions.
- Improve system stability , optimize standby power consumption , improve endurance. Reunion moment , please remember to put down the phone , more than with the family .
Click to expand...
Click to collapse
H2OS v15 IS HERE
Download takes a little while as the servers are too heavily loaded.
Don't ask for mirrors please
(TESTING MARSHMALLOW HAS POSSIBLE BOOTLOOPS.. WE ARE WORKING)
THOSE WHO ARE STRUCK AT FASTBOOT, RESET USING THIS METHOD
Links Updated
[/quote]I'm happy to say that the most awaited Hydrogen OS was successfully working on Indian OP2
It's Currently Stock.
Working closely to create build the ROM best suiting for Indian OP2
Credits : Oneplus for this Awesome Device
Click to expand...
Click to collapse
I've added the OTA also.. Please follow the guide below..
1) Needs Properly unlocked bootloader with TWRP recovery.
Follow THIS guide in case you are not on unlocked bootloader.
2) NANDROID your current Oxygen OS. (Incase you want to return back to Previous anytime)
3) Download ROM(OnePlus2Hydrogen_14_OTA_015_all_1601291143.zip) from above link , GAAPS and place them in the internal SD (Thanks @ MastahF )
Note: BACK UP YOUR DATA, INCASE YOU DO SOME CRAZY THINGS, YOUR DATA MAY BE LOST AND I'm NOT RESPONSIBLE
4) Reboot to recovery and go to advanced wipe
5) Wipe Dalvik, Cache, Data (No need to erase Internal Memory)
6) Swipe to do a factory wipe
7) Flash the ROM ZIP file
8) Flash the GAPPS file
9) Wipe Cache
10) Reboot !!
FOR XPOSED MOUDULES TAKE THIS TUTORIAL.
After Reboot :
After initial WiFi .. the connection takes a while, Follow this..
Hit Back Button
Turn Off Wifi
Hit Skip
Enter Your Name
Then It again tries to connect
Turn On Wifi
Proceeds very smoothly from there after..
Click to expand...
Click to collapse
1) Select English
2) Connect>Google Login>Everything Works Fine....
2) Select the AOSP Keyboard in Input Settings for getting rid of Chinese Keyboard. (Sincerely, I'm not against Chinese)
Click to expand...
Click to collapse
Thanks to MY NEW FRIEND MANMOHAN, KRISHNA AR from OP2 Hyderabad Group
Hit Thanks and share your feedback.
Thanks to @TheDj408 For the awesome video review..
KNOWN ISSUES:
1) Call Conferencing Not Possible
Click to expand...
Click to collapse
Any other bugs..
Let Me Know...
Warm welcome !!!! :laugh::laugh::laugh::laugh::laugh:
Awesome!
Hey @thebuginyou
I made a video on Hydrogen OS !
Add this in OP as it will help others to understand features and pros over Oxygen OS!
Great work got to try this
ps000000 said:
Warm welcome !!!! :laugh::laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
TheDj408 said:
Awesome!
Click to expand...
Click to collapse
hemanthsai10 said:
Great work got to try this
Click to expand...
Click to collapse
Thanks Guyz for your warm welcome and Support..
Fingerprint scanner works ?
Sent from my Nexus 5 using Tapatalk
thebuginyou said:
Hi friends
I'm happy to say that the most awaited Hydrogen OS was successfully working on Indian OP2
It's Currently Stock.
Working closely to create build the ROM best suiting for Indian OP2
Thanks to
I've added the OTA also.. Please follow the guide below..
Thanks to By qwsdert4 for link
Hit Thanks and share your feedback.
Rooting Tutorial to come..
Click to expand...
Click to collapse
hello ... but I wanted to ask, it also works to opt international version?
Inviato dal mio ONE A2003 utilizzando Tapatalk
You can choose to flash this from OxygenOS using stock recovery or custom recovery such as TWRP. However if you choose to wipe data in stock recovery your phone will be completely deleted clean of all your added files. So I suggest to use TWRP as select wipe data in twrp only wipe clean your app while remaining intact rest of phone data files.
but this hydrogen is compatible for European users as the undersigned? there is the Italian language?
Inviato dal mio ONE A2003 utilizzando Tapatalk
eefo said:
Fingerprint scanner works ?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Yes Bro
It Works 50% better to Oxygen OS
eefo said:
Fingerprint scanner works ?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Ghost277 said:
hello ... but I wanted to ask, it also works to opt international version?
Inviato dal mio ONE A2003 utilizzando Tapatalk
Click to expand...
Click to collapse
YES
I cannot hide messages on lock screen. Do you have any solution? thanks
---------- Post added at 09:35 AM ---------- Previous post was at 09:31 AM ----------
This rom is really smooth but im missing some options on oxygen like the on screen nav buttons
Ghost277 said:
but this hydrogen is compatible for European users as the undersigned? there is the Italian language?
Inviato dal mio ONE A2003 utilizzando Tapatalk
Click to expand...
Click to collapse
Only Chinese and English
kalvin91 said:
Only Chinese and English
Click to expand...
Click to collapse
sin ... only Chinese and English ... then do not install ...
Inviato dal mio ONE A2003 utilizzando Tapatalk
anyone did dirty flasH?????
RulerAk said:
anyone did dirty flasH?????
Click to expand...
Click to collapse
dirty flash from O2OS?
thebuginyou said:
Hi friends
I'm happy to say that the most awaited Hydrogen OS was successfully working on Indian OP2
It's Currently Stock.
Click to expand...
Click to collapse
many thanks.
downloading it now.
will provide feedback / bugs / etc. on this thread.
thank you again
---------- Post added at 07:57 PM ---------- Previous post was at 07:17 PM ----------
thebuginyou said:
It's Currently Stock.
Click to expand...
Click to collapse
Bug #1 : Settings > Accounts > Displays Google Account - but does not allow selection of specific features of the account to be sync'd.
For. ex. if i wish to choose that only my Google Contacts, Email, Calendar be Sync'd, it doesnt allow me to select these options.
Also, added 2 of my Google Accounts. However the Settings > Accounts > Google - displays nothing & the phone takes me back to Home Screen instead.
Is anyone else facing this issue or is it only me
whymail said:
Bug #1 : Settings > Accounts > Displays Google Account - but does not allow selection of specific features of the account to be sync'd.
For. ex. if i wish to choose that only my Google Contacts, Email, Calendar be Sync'd, it doesnt allow me to select these options.
Also, added 2 of my Google Accounts. However the Settings > Accounts > Google - displays nothing & the phone takes me back to Home Screen instead.
Is anyone else facing this issue or is it only me
Click to expand...
Click to collapse
It's with everyone.
H2OS is not a full length google supporting OS..
The Sync of specific things from accounts is not possible as of now...
Thanks for the report..:good:
I'm having trouble getting the Google apps to show up. I don't have play store or anything on my home screens. I have signed into my google account but everything else is missing.
DISCLAIMER :
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, i will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Hi guys,
I decided to put out some early builds of LineageOs.
My builds might have some unmerged commits or other modification not related to LineageOs.
I plan to do weekly builds until Lineage starts to roll out the official builds, so Nexus 5 users are able to have the biscuit earlier.
I did not encountered any bugs, everything works so it's safe to flash.
No need to wipe the device when you flash a new build just wipe cache/dalvik and flash the zip.
I plan to do nightlies (daily build) until Lineage start to roll out the official builds so Nexus 5 users are able to have the biscuit earlier.
For the list of features just look at the changelog at the bottom of this post.
Download link : https://www.androidfilehost.com/?fid=745425885120700252
Gapps : http://opengapps.org/
Wallpaper used in the screenshots :
https://www.dropbox.com/s/ow7yzve7zt914d5/UHD (27).jpg?dl=0
Enjoy
Changelog 01/13/17
January 2017 security patch.
Added the new LieageOs welcome screen (of course if you want to see it you need to clean flash your device, otherwise at the bottom of this post there is a picture.
Synced with the latest Lineage source.
Option to enable privacy guard for apps by default during the setup added.
OmniSwitch removed for the moment , Omni team are rewriting it.
Changelog 01/07/17 :
Synced with latest Lineage source.
Pixel Launcher baked into the rom (you need nano gapps to have the Google now swipe on the launcher.
Removed Omniswitch , it was causing my builds to fail lately , once the the bug found it will be back.
Changelog 01/05/17 :
Circular icons built-in the system. Works on all launcher.
Apps that supports circular icons are mostly Google apps and twitter.
Drivedroid as been added as a system app (usefull to boot various iso)
Start default music player on headset plugin have been added but it's buggy it doesn't work.
It's in the settings/sound settings.
I will try to fix it on next build.
Changelog 01/03/17 :
Added OmniSwitch (credits to OmniRom)
Add back cm charging on/off sounds
Settings: Redirect charging sounds settings to CMParts
DeskClock: timer: Add ability to keep screen on When enabled screen will stay on while timer tab is active
Removed the black in the settings and changed to a material color
sepolicy: Allow HDCP for wifi display / casting
Frameworks: Cleanup and remove duplicate sounds
Show lineage platlogo when tapping on LineageOS version
Changelog 01/02/17 :
Gello have been added back
New Bootanimation (credits to Moritz “LittleFox” Grosch)
Pixelify (navigation keys , ui colors revamped) - see screenshot attached (credits to Rashed Abdel-Tawab)
Thanks to the lineageos-dev guys who helped me out.
Thanks to Fishmasterus
Thanks to XDA.
Wow! So fast, so excited! Thanks!
cool
Better than CM 14.1 CAF?
Wysłane z mojego Nexus 5 CAF przy użyciu Tapatalka
banikgames said:
Better than CM 14.1 CAF?
Wysłane z mojego Nexus 5 CAF przy użyciu Tapatalka
Click to expand...
Click to collapse
Much, much better
You used this ROM?
Wysłane z mojego Nexus 5 CAF przy użyciu Tapatalka
banikgames said:
You used this ROM?
Wysłane z mojego Nexus 5 CAF przy użyciu Tapatalka
Click to expand...
Click to collapse
I run this ROM on my phone , it's stable enough for daily use.
Thx. ;K
Wysłane z mojego Nexus 5 CAF przy użyciu Tapatalka
Is the same as cm14.1 but with bootanimation and name changed? xd
santi1993 said:
Is the same as cm14.1 but with bootanimation and name changed? xd
Click to expand...
Click to collapse
Flashed it on my phone before I came to work and it works great on my phone.
Cindy
Hi,
Thanks for your job
Can it be flashed after an official CM 14.1 without wype ?
006fazer said:
Hi,
Thanks for your job
Can it be flashed after an official CM 14.1 without wype ?
Click to expand...
Click to collapse
I would wipe everything if i was you.
celrau said:
Much, much better
Click to expand...
Click to collapse
How is it better?
generic cm14,1 with no animation and different logo
wats the difference just name changed to lineage from cyanogen..
Abhi Mady said:
wats the difference just name changed to lineage from cyanogen..
Click to expand...
Click to collapse
It's a very early stage for LineageOs , they started from where they left off in CM14.1, that's why it looks exactly the same for now
Guys i will provide another build by sunday , i have my kids this weekend so i have to stay away from my computer.
Stay tuned.
Downloading now can't wait to try it out thank you
if you have echec to instal on multirom , change the updater-script by this.
tested
New build is up guys, check the download link in the description.
Synced with the latest source, but nothing new.
Happy New Year and happy flashing!
This thread is outdated, Oreo port will be uploaded to this other thread from now on.
Download link 7.11.18:
Mega
Baidu
Android One Nougat 7.12.19 is out but not ported. However, you can install it using my modded TWRP
https://forum.xda-developers.com/mi...rp-3-1-1-0-t3715084/post74745680#post74745680
How to install:
- Unlock bootloader
- Flash TWRP
- Wipe data, cache and dalvik
- Flash A1 Firmware
- Flash rom zip file
- Reboot
How to update
- Boot into TWRP
- Wipe cache and dalvik/art
- Flash rom zip file
- Reboot
Known issues:
- If you dont flash A1 firmware your fingerprint will acts as a button while unlocked.
- If you don't have Goodix fingerprint variant, fingerprint may not work.
- You tell me.
FAQ:
Q: Can I flash over August patch without wiping data?
A: Yes, you can. However WiFi may not work. If that's your case try restoring network settings. (Settings -> More -> Restore network settings). If WiFi still doesnt work, you'll need to wipe data.
Q: Can I update via OTA?
A: No, you can't. You'll need to wait until I port the update.
Q: Does this ROM come pre-rooted
A: No, it's the A1 stock rom which doesn't come rooted. If you want root, flash Magisk through TWRP
Q: Can I install Xposed?
A: Yes, you can. Just make sure you download xposed for SDK 25.
Q: Will this rom unlock 4G 800MHz band (B20)?
A: No, it won't unlock it. Mi A1 uses a different modem which supports it. Mi 5X modem doesn't.
Q: Do I need to unlock my bootloader?
A: Yes, you need to unlock the bootloader before you can install any custom ROM.
Q: How can I unlock my bootloader?
A: Apply for permissions on http://en.miui.com/unlock/ then download the tool and follow the steps.
Q: Where can I download TWRP?
A: You can download it from here
Donations:
If you like my work and want to contribute, you can donate via paypal.me/aex12
XDA:DevDB Information
Android One Port Nougat, ROM for the Xiaomi Mi 5X
Contributors
Aex12
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: Android One
Version Information
Status: Stable
Current Stable Version: 7.11.18
Stable Release Date: 2017-11-24
Created 2017-10-21
Last Updated 2018-03-07
Reserved
anyone know if it is possible to sideload the ota updates maybe??
---------- Post added at 03:30 PM ---------- Previous post was at 03:15 PM ----------
looks like it would be ok to dirty flash this hmm...
killswitx said:
anyone know if it is possible to sideload the ota updates maybe??
Click to expand...
Click to collapse
As stated on FAQs, you cant update via OTA, as this OTAs are made for an A/B device, and Mi 5X doesnt support A/B.
killswitx said:
looks like it would be ok to dirty flash this hmm...
Click to expand...
Click to collapse
It's OK if you come from another Android One port. Probably you will face some WiFi issues, to solve them read FAQs.
thanks
thanks but Are you sure you will let Android O run in this device??
adeljck said:
thanks but Are you sure you will let Android O run in this device??
Click to expand...
Click to collapse
I cant say it for sure. Will see when it's released for the A1 if it can be ported.
OMG! You're an angel!!
---------- Post added at 04:55 AM ---------- Previous post was at 04:48 AM ----------
@Aex12 is this rom pre-rooted?
I was waiting for this!! THANK YOU SO MUCH!!
Dirty flashed on this rom: http://en.miui.com/forum.php?mod=vi...997&page=15&extra=page=1&mobile=2#pid17831997
Everything working perfectly.
alekos panagulis said:
Dirty flashed on this rom: http://en.miui.com/forum.php?mod=vi...997&page=15&extra=page=1&mobile=2#pid17831997
Everything working perfectly.
Click to expand...
Click to collapse
Didn't you get any WiFi issues?
I got WiFi issues while updating from august to september. But not from september to october. Maybe updating from august to october dont cause any issue.
Aex12 said:
Didn't you get any WiFi issues?
I got WiFi issues while updating from august to september. But not from september to october. Maybe updating from august to october dont cause any issue.
Click to expand...
Click to collapse
No wifi issue.
@Aex12
Thank yoouuu! After waiting so long to unlock my bootloader I finally made it and flashed your rom right away. And it's working as a charm. I'm so happy I got rid of Miui 8 Chinese version and it's many bugs and problems (and occasional Chinese language notification I got no idea what it was saying). MiUi was cute and nice on a few parts, but it just seemed like an unfinished piece of software on many points (super aggressive ram management, brightness slider problem, crazily complex settings menu -especially the applications permissions one divided in three sections-).
This rom works just flawlessly for now, and I had no issue with the fingerprint reader acting as a button on my side. It's really great to see some functions works like fingerprint swipe for notifications or lock-screen notifications. Oh ! And I can finally make the google assistant and feed works out of the box without complex tweaks :laugh:
Camera is still ****ty though (especially coming from a nexus 5x) but, hey, it's a 200€ phone.
Do you have a paypal donate account so I can offer you a beer and encourage you to port the next android updates ?
As we all know all these 3 devices (Note 4x, MIA1 and MI5x) have the se chipsets
Is it possible to port it also on note 4x?
jonjon88 said:
@Aex12
Thank yoouuu! After waiting so long to unlock my bootloader I finally made it and flashed your rom right away. And it's working as a charm. I'm so happy I got rid of Miui 8 Chinese version and it's many bugs and problems (and occasional Chinese language notification I got no idea what it was saying). MiUi was cute and nice on a few parts, but it just seemed like an unfinished piece of software on many points (super aggressive ram management, brightness slider problem, crazily complex settings menu -especially the applications permissions one divided in three sections-).
This rom works just flawlessly for now, and I had no issue with the fingerprint reader acting as a button on my side. It's really great to see some functions works like fingerprint swipe for notifications or lock-screen notifications. Oh ! And I can finally make the google assistant and feed works out of the box without complex tweaks :laugh:
Camera is still ****ty though (especially coming from a nexus 5x) but, hey, it's a 200€ phone.
Do you have a paypal donate account so I can offer you a beer and encourage you to port the next android updates ?
Click to expand...
Click to collapse
You can make camera a little better by downloading the Google Camera modded with HDR+ and adding these two lines to build.prop:
Code:
persist.camera.HAL3.enabled=1
persist.camera.eis.enable=1
However, you will lose HDR support on native camera.
If you want to donate me you can do so on paypal.me/aex12
Thank you, donations are very appreciated!
rEsonancE_0404 said:
As we all know all these 3 devices (Note 4x, MIA1 and MI5x) have the se chipsets
Is it possible to port it also on note 4x?
Click to expand...
Click to collapse
Probably it can be done. Just ask a dev who have Note 4X to port it.
Aex12 said:
You can make camera a little better downloading the Google Camera modded with HDR+ and adding these two lines to the build.prop:
However, you will lose HDR support on native camera.
If you want to donate me you can do so on paypal.me/aex12
Thank you, donations are very appreciated!
Probably it can be done. Just ask a dev who have Note 4X to port it.
Click to expand...
Click to collapse
Edit: Can't PM you
Did you port the MIA1 rom.on 5x or did you build it on source?
I wonder what porting software did you use as android kitchen is not working on newer roms now
Edit2: do you have google+ or anything? To PM you?
After a few hours I noticed that unlocking with fingerprint has become very slow again. Something like 3 seconds.
alekos panagulis said:
After a few hours I noticed that unlocking with fingerprint has become very slow again. Something like 3 seconds.
Click to expand...
Click to collapse
The slow fingerprint sensor is an A1 related issue. Maybe it get improved in the future with updates.
rEsonancE_0404 said:
Edit: Can't PM you
Did you port the MIA1 rom.on 5x or did you build it on source?
I wonder what porting software did you use as android kitchen is not working on newer roms now
Edit2: do you have google+ or anything? To PM you?
Click to expand...
Click to collapse
I dont use any kind of AIO software. I use a bunch of linux tools and use them through CLI.
I use simg2img and make_ext4fs for the system.img and mkbootimg and unpackbootimg for the boot.img
Hello Aex12, I have no coding skills, so maybe my question is silly: it is possible to introduce in this rom the possibility to set different ringtone for each sim? Thank you.
Inviato dal mio Mi A1 utilizzando Tapatalk
alekos panagulis said:
Hello Aex12, I have no coding skills, so maybe my question is silly: it is possible to introduce in this rom the possibility to set different ringtone for each sim? Thank you.
Inviato dal mio Mi A1 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes, it would be possible. However this rom is intended to be an exact same copy of the Mi A1.
Aex12 said:
Yes, it would be possible. However this rom is intended to be an exact same copy of the Mi A1.
Click to expand...
Click to collapse
Oh wow! Please consider to introduce this feature, please!! You could make a copy of Mi A1 and one more rom with experimental features. You would be my hero.
Inviato dal mio Mi A1 utilizzando Tapatalk
I'm on the beta rom and everytime I try to check safetynet it says "ctsprofile:false".
I tried the universal zip method but it disables the magisk root. Can someone help me about this .......
Pourush Sharan Bhargav said:
I'm on the beta rom and everytime I try to check safetynet it says "ctsprofile:false".
I tried the universal zip method but it disables the magisk root. Can someone help me about this .......
Click to expand...
Click to collapse
You choose to modify system partition in twrp when you started it for the first time my friend. That's the result. Keep read only should be your only choice when you start twrp.
Skickat från min POCOPHONE F1 via Tapatalk
How to do that. Twrp now doesn't shows any kind of option as you told???
What? If he did what you just said he wouldn't be able to flash anything. Plz don't try to help if you have no idea what you are saying, cause that's not the first time I saw that. @op try to reinstall magisk or there is module called safety net patch maybe it will help
Zeggi said:
You choose to modify system partition in twrp when you started it for the first time my friend. That's the result. Keep read only should be your only choice when you start twrp.
Skickat från min POCOPHONE F1 via Tapatalk
Click to expand...
Click to collapse
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
I'm not saying he can't install anything.
I'm explaining why safetynet fails.
Reinstall boot.img and it will solve the issue.
But since twrp modified system partition magisk won't solve it.
You could try the following and see if it helps you, check first post for instructions, https://forum.xda-developers.com/on...agisk-17-2-canary-channel-acess-t3840497/amp/
If it doesn't help I would recommend to reinstall rom, when you start twrp don't swipe at first boot just press "keep system read only."
Skickat från min POCOPHONE F1 via Tapatalk
---------- Post added at 10:23 PM ---------- Previous post was at 10:19 PM ----------
uremytoy said:
What? If he did what you just said he wouldn't be able to flash anything. Plz don't try to help if you have no idea what you are saying, cause that's not the first time I saw that. @op try to reinstall magisk or there is module called safety net patch maybe it will help
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
Click to expand...
Click to collapse
You are in the wrong. Please read some and learn how partitions work and what twrp does when you allow it to modify partitions. He clearly gets safetynet failure because system has been changed. Since he is running magisk he clearly wants the phone to run system less which is the whole point of using magisk...
Your claim is pure smack.
Skickat från min POCOPHONE F1 via Tapatalk
Zeggi said:
[/COLOR]You are in the wrong. Please read some and learn how partitions work and what twrp does when you allow it to modify partitions. He clearly gets safetynet failure because system has been changed. Since he is running magisk he clearly wants the phone to run system less which is the whole point of using magisk...
Your claim is pure smack.
Skickat från min POCOPHONE F1 via Tapatalk
Click to expand...
Click to collapse
So if i keep the system read only, can i flash magisk zip in twrp and will CTS passes?
uremytoy said:
What? If he did what you just said he wouldn't be able to flash anything. Plz don't try to help if you have no idea what you are saying, cause that's not the first time I saw that. @op try to reinstall magisk or there is module called safety net patch maybe it will help
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
Click to expand...
Click to collapse
Same issue
Solved this finally by switching from MIUI 10 Beta to Xiaomi.EU rom and I am in love with this ROM....
Safetynet passed by default
I've Miui 10 (beta rom) Bootloader lock and non modified / root device and cts failed. I think we need to report to pocophone
FieryAura said:
I've Miui 10 (beta rom) Bootloader lock and non modified / root device and cts failed. I think we need to report to pocophone
Click to expand...
Click to collapse
If your bootloader is still locked please report this issue to Xiaomi/Poco team on their forum as well as on tweeter.
I discovered this issue a long ago but since my bootloader was unlocked i though it's due to that only.
but if it the same with locked boot loader definitely this is big issue from POCO side and need to be addressed ASAP.
PS: SafetyNet Passes on Xiaomi.EU roms because they use different device's (Polaris-MI Mix 2s) "fingureprint" (i.e device name used while registering on playstore) rather than POCO's (Beryllium)
read more here...https://forum.xda-developers.com/showpost.php?p=77876668&postcount=113
Do point this out when you raise the issue to POCO team so they can track the issue faster
jineshpatel30 said:
If your bootloader is still locked please report this issue to Xiaomi/Poco team on their forum as well as on tweeter.
I discovered this issue a long ago but since my bootloader was unlocked i though it's due to that only.
but if it the same with locked boot loader definitely this is big issue from POCO side and need to be addressed ASAP.
PS: SafetyNet Passes on Xiaomi.EU roms because they use different device's (Polaris-MI Mix 2s) "fingureprint" (i.e device name used while registering on playstore) rather than POCO's (Beryllium)
read more here...https://forum.xda-developers.com/showpost.php?p=77876668&postcount=113
Do point this out when you raise the issue to POCO team so they can track the issue faster
Click to expand...
Click to collapse
Yes, i've reported this on twitter to poco. I hope a quick fix
jineshpatel30 said:
If your bootloader is still locked please report this issue to Xiaomi/Poco team on their forum as well as on tweeter.
I discovered this issue a long ago but since my bootloader was unlocked i though it's due to that only.
but if it the same with locked boot loader definitely this is big issue from POCO side and need to be addressed ASAP.
PS: SafetyNet Passes on Xiaomi.EU roms because they use different device's (Polaris-MI Mix 2s) "fingureprint" (i.e device name used while registering on playstore) rather than POCO's (Beryllium)
read more here...https://forum.xda-developers.com/showpost.php?p=77876668&postcount=113
Do point this out when you raise the issue to POCO team so they can track the issue faster
Click to expand...
Click to collapse
Good thoughts.
I will raise this issue on beta tester page and try to raise a bug report.
FieryAura said:
Yes, i've reported this on twitter to poco. I hope a quick fix
Click to expand...
Click to collapse
sanjay0501 said:
Good thoughts.
I will raise this issue on beta tester page and try to raise a bug report.
Click to expand...
Click to collapse
Great.
I would have done it my self but i'm short on time now a days.
I will try to collect all the roms pie (treble gsi)
LIST AVAILABLE*: (not in a specific order and more to come
1.*HavocOS*: based on*https://forum.xda-developers.com/pr...-device-development/rom-havoc-os-8-1-t3819050
Latest stable :*https://sourceforge.net/projects/havoc-os/files/arm64aonly/
2.*BenzoROM*: based on*https://forum.xda-developers.com/pr...device-development/gsi-benzo-rom-9-0-t3837127
Latest stable :*https://forum.xda-developers.com/showpost.php?p=78312149&postcount=284
3.*PixelExperience*: based on*https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Latest stable :*https://github.com/EnesSastim/Downloads/releases/tag/PE-A-2018-09-05
4.*LOS16.0 PPR2*: based on*https://forum.xda-developers.com/pr...vice-development/9-0-lineage-os-16-0-t3840801
Latest stable :*https://mega.nz/#F!3XwFlAaC!VdzCKlrR-f6D-a8oEz9JkQ!DD4z0AhA
5.*ArrowOS*: based on*https://forum.xda-developers.com/pr...abled-device-development/gsi-arrowos-t3835111
Latest stable :*https://sourceforge.net/projects/arrow-os/files/arrow-9.x/GSI/7_sep_2018//
6.*DescendantOS*:*https://forum.xda-developers.com/pr...escendant-android-pie-custom-rom-ver-t3840578
7.*PixelDust*:*https://forum.xda-developers.com/showpost.php?p=78184921&postcount=212
8.*AEX 6.0 OFFICIAL*:*https://forum.xda-developers.com/showpost.php?p=78245997&postcount=254
I copy a bit of my friend's thread @raystef66, that he does a great job in the community, the thread is in process, I hope help to improve it
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
How to install:
1 unlock bootloader and twrp ...
2 wipe system, data, dalvik and cache
3 optional: if you come from an unofficial rom you must flash the boot and vendor stock
4 install the system image from twrp
5 optional: install gapps and magisk
6 reboot and configure. ..
Gapps: https://opengapps.org/
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
for a better use modify build.prop with these lines
ro.sf.lcd_density=320
ro.build.characteristics=tablet persist.camera.HAL3.enabled=1 persist.sys.qcom-brightness=4095 ro.product.manufacturer=xiaomi ro.product.name=trébol ro.product.model=Mi Pad 4
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
@davidroid1 please past links correctly
pan_droid said:
@davidroid1 please past links correctly
Click to expand...
Click to collapse
Ok, I update links
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
davidroid1 said:
I will try to collect all the roms pie (treble gsi)
LIST AVAILABLE*: (not in a specific order and more to come
Click to expand...
Click to collapse
Could you explain what is this? Set of pie gsi images existed as the subject say, or set of gsi tested on mi pad 4?
Pie is outside of my interesting because of exposed. Will you create the list tested on pad 4 gsi oreos?
thank you very much! Which one are you using? I want a stable and not missing version of the feature, I like PIXEL ROM
wei_jianhui said:
thank you very much! Which one are you using? I want a stable and not missing version of the feature, I like PIXEL ROM
Click to expand...
Click to collapse
I am now in no gsi (4pda crdroid) but I was using aex
Enviado desde mi Phh-Treble vanilla mediante Tapatalk
Has any ROM or lets say Kernel within a ROM Widevine L1 support and not L3? For HD-streaming?
@thE_29
L1 Widevine keys would have to be in SOC secure enclave, they aren't -> no ROM can enable L1 on this tablet.
Xiaomi could add L1 keys to the device (it has a supported SOC and device unique key which are both requirements for Widevine provisioning 3.0 - OTA - to work), just like they are doing with Pocophone, but it's 99.99% sure they won't - Chinese users don't care and Mi Pad 4 had no global release, nor there is a global release planned.
Assume L1 will never come to Pad 4, because the chance of it happening is super low.
davidroid1 said:
How to install:
1 unlock bootloader and twrp ...
2 wipe system, data, dalvik and cache
3 optional: if you come from an unofficial rom you must flash the boot and vendor stock
4 install the system image from twrp
5 optional: install gapps and magisk
6 reboot and configure. ..
Gapps: https://opengapps.org/
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
I did all of this except #3. I know mine shipped with a vendor rom as it was already unlocked. Is there a way tomake sure all of the vendor portion is gone?
Etyl said:
@thE_29
L1 Widevine keys would have to be in SOC secure enclave, they aren't -> no ROM can enable L1 on this tablet.
Xiaomi could add L1 keys to the device (it has a supported SOC and device unique key which are both requirements for Widevine provisioning 3.0 - OTA - to work), just like they are doing with Pocophone, but it's 99.99% sure they won't - Chinese users don't care and Mi Pad 4 had no global release, nor there is a global release planned.
Assume L1 will never come to Pad 4, because the chance of it happening is super low.
Click to expand...
Click to collapse
Etyl, do you know how widevine is handled on PCs with browser based viewing? Is it via a web plugin? I am curios if that could be a strategy for Android devices that lack support in soc/keys. I think the Kodi netflix implementation relies on underlying soc/keys.
---------- Post added at 10:01 AM ---------- Previous post was at 10:00 AM ----------
Etyl, do you know how widevine is handled on PCs with browser based viewing? Is it via a web plugin? I am curios if that could be a strategy for Android devices that lack support in soc/keys. I think the Kodi netflix implementation relies on underlying soc/keys.
bbbasher said:
Etyl, do you know how widevine is handled on PCs with browser based viewing? Is it via a web plugin? I am curios if that could be a strategy for Android devices that lack support in soc/keys. I think the Kodi netflix implementation relies on underlying soc/keys.
Click to expand...
Click to collapse
Same way as mobile devices - with keys in hardware secure enclave and with extra software security:
On PC you're watching in 720p unless you have an Intel 7xxx, 8xxx or 9xxx CPU which comes with Widevine keys in secure enclave AND you're using Internet Explorer (for up to 1080p) or Edge/Microsoft store Netflix app on Windows 10 (for 4k). Source: https://help.netflix.com/en/node/23742
davidroid1 said:
How to install:
3 optional: if you come from an unofficial rom you must flash the boot and vendor stock
Click to expand...
Click to collapse
What does this mean and can you please explain what it does?
How do I 'flash the boot and vendor stock'?
sml12 said:
What does this mean and can you please explain what it does?
How do I 'flash the boot and vendor stock'?
Click to expand...
Click to collapse
Flash ROM stock, and backup vendor and boot partition
Enviado desde mi Phh-Treble vanilla mediante Tapatalk