Related
Installing this recovery will void your warranty. I am not responsible for any bricked device.
Installation:
Make sure your bootloader is unlocked
Download the recovery image from above
Reboot into fastboot
Run the following command (Change the .img to whatever the name of file is you downloaded):
Code:
fastboot flash recovery recovery.img
Download link:
https://dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
BraskOviedo said:
Installing this recovery will void your warranty. I am not responsible for any bricked device.
Installation:
Make sure your bootloader is unlocked
Download the recovery image from above
Reboot into fastboot
Run the following command (Change the .img to whatever the name of file is you downloaded):
Code:
fastboot flash recovery recovery.img
Download link:
https://dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
Click to expand...
Click to collapse
Does this also have pstore enabled?
infrag said:
Does this also have pstore enabled?
Click to expand...
Click to collapse
It is the latest official release, if it was on previous versions it should have it also.
For me it works at the first flash and after the reboot touch stops working, any advice ?
Im on 6/64Gb x820.
rshahzad17 said:
For me it works at the first flash and after the reboot touch stops working, any advice ?
Im on 6/64Gb x820.
Click to expand...
Click to collapse
How did you flash it?
through TWRP? or fastboot?
xuser_ said:
How did you flash it?
through TWRP? or fastboot?
Click to expand...
Click to collapse
Through fastboot and also tried through previous TWRP with no luck, the touch doesn't seem to work for me with 3.1, I actually had Cuoco92's recovery earlier.
rshahzad17 said:
Through fastboot and also tried through previous TWRP with no luck, the touch doesn't seem to work for me with 3.1, I actually had Cuoco92's recovery earlier.
Click to expand...
Click to collapse
Oh!!!
I think Cuoco92's recovery is modified one(not sure about the modification)
I suggest to revert back to
https://eu.dl.twrp.me/x2/twrp-3.0.2-1-x2.img.html
then full wipe using above TWRP version
then try installing the latest TWRP
https://eu.dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
xuser_ said:
Oh!!!
I think Cuoco92's recovery is modified one(not sure about the modification)
I suggest to revert back to
https://eu.dl.twrp.me/x2/twrp-3.0.2-1-x2.img.html
then full wipe using above TWRP version
then try installing the latest TWRP
https://eu.dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
Click to expand...
Click to collapse
Thanks, I will try this !
I was using TWRP 3.0.2.1-x2 and I tried flashing a new ROM; After flash I'm stuck, it will boot only to recovery!
I tried flashing TWRP 3.1.0.0-x2 - same thing, can't get out of the loop - any ideas please?
Thank you!
the latest 3.1.1 is not work
通过我的 Le X821 上的 Tapatalk发言
Hi Mate
unfortunately the latest twrp doesn't work, you will need to revert to "twrp-3.1.1-0-x2"
it is working fine, you can do so on windows once all drivers installed correctly or use any Linux operating system
if you need help let me know and will write a detailed instruction how to do it on Linux as it is a lot easier than junk windows
good luck
sam
V10.3.7 Incremental Update(10.3.5 to 10.3.7):
https://bigota.d.miui.com/V10.3.7.0....PFHINXM-V10.3.7.0.PFHINXM-f7f2449b3f-9.0.zip
V10.3.7 Full Recovery ROM:
https://bigota.d.miui.com/V10.3.7.0.PFHINXM/miui_VIOLETINGlobal_V10.3.7.0.PFHINXM_ce5c2d34d7_9.0.zip
V10.3.7 Fastboot ROM:
http://bigota.d.miui.com/V10.3.7.0....FHINXM_20190524.0000.00_9.0_in_4eda76945a.tgz
Press Thanks if i helped!
Thanks for this. Do you know where to get the fastboot ROM?
aleclim234 said:
Thanks for this. Do you know where to get the fastboot ROM?
Click to expand...
Click to collapse
Not yet available
Just found this 10.3.7 fastboot ROM from MIUI forums. Hope this helps everyone.
http://bigota.d.miui.com/V10.3.7.0....FHINXM_20190524.0000.00_9.0_in_4eda76945a.tgz
EDIT: If the file has a .gz file extension, just rename it to .tgz so that you can extract it. It does take a bit of time for WinRAR to read it though.
For everyone trying to flash the 10.3.5.0 to 10.3.70 zip instead of the full recovery image on the TWRP by Petercxy , it will lead to a bootloop
Hi all and sorry for my bad english in first!!
i live in italy and i've buyed(but still not recieved) one oneplus 9r from china whit oxygenos rom on board..
When it comes i want to root & debloat it, but i've some queustion cause in last year i've used only device with custom rom!.
first of all i wan't to root the phone, but preserve the possibility to update the OS with ota. if i understand right it's possible with magisk, can please someone tell me the correct step to make?
after root i vant to uninstall not necessary app for my utilization (facebook/instagram/netflix, red cable and oneplus account, google app, gdrive, google photo and most of BigG apps cause i'm using only gmail/yt/maps/ an store!).
the question is.... if i uninstall this app it will be re installed in future ota?
Thanks in advice!
Step1 : unlock bootloader, this will wipe the storage, then setup the device once again then enable usb debugging in developer options.
You can use this
Tool to make (tool all in one) your life easier : https://sourceforge.net/projects/tool-all-in-one/files/TOOL_ALL_IN_ONE_1.0.6.1.zip/download
you should select 8t as 9r is not supported officially
at the moment.
Step2: update the phone to latest version , right now it's 11.2.5.5
Step 3: download the same version of the oxygen is ota wether from xda, OnePlus official site , oxygen updater ( make sure it is full version).
Step4: on pc now extract only the payload.bin file in the input of the payload extracter ,
Now use the payload extracter ,
Run .exe and get boot.img .
payload_dumper_tool_by_ius.zip
drive.google.com
(MAKE SURE THE PHONE OS VERSION AND BOOT IMG VERSION IS SAME)
Step 5: install magisk manager on phone, now patch the boot.img that you extracted earlier. Copy this patched boot.img in platforms tool folder(I hope that u have installed the platform tools and adb & fastboot ).
Step 6: open terminal there in platform tools , use the tool all in one to boot your phone in fast boot mode,then flash patched boot.img using.
Fastboot devices
Fastboot flash boot_a patched.img
Fastboot flash boot_b patched.img
Bingo got rooted.
Step 7( optional) : now properly restart the phone by opening magisk , then install universal safety net fix, debloat modules in magisk.
You can use lucky patcher to debloat unnecessary things (which don't exist as it is oxygen os)
Now in future if your phone gets ota make sure you disable all magisk modules then download the full version of ota from oxygen updater & update it locally & do not restart.
go to magisk ,
flash magisk to inactive slot.
restart now,
REnable the modules. (Tip don't enable the lucky patcher module this will put you in bootloop)
enjoy the ota .
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
lvints said:
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
Click to expand...
Click to collapse
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
Way better than twrp just follow the steps u won't lose anything
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
So how did it go?
Rajveer chauhan said:
So how did it go?
Click to expand...
Click to collapse
I've already downloaded the files, but I haven't tested them yet.
I'll leave it for the weekend, if there's a problem I can solve it with peace of mind.
Sir have you tried changing the font of your 9R?
I've been looking on the magisk forums or some app but I haven't had success.
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Rajveer chauhan said:
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Click to expand...
Click to collapse
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Same version
lvints said:
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Click to expand...
Click to collapse
.
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
I flashed the img file and it booted to OrangeFox but I cannot press anything as the screen does not react. What is the solution for it?
It's is compatible with oos 11
Not with oos 12, any custom roms
Rajveer chauhan said:
It's is compatible with oos 11
Not with oos 12, any custom roms
Click to expand...
Click to collapse
I was on OOS 11. The 11.2.8.8.LE28DA.
Flashed it, boot up but cannot press anything. How can I go back to the original boot?
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Rajveer chauhan said:
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Click to expand...
Click to collapse
Thanks I got back to the original boot, but now how can I root with Magisk?
@Rajveer chauhan
Hello sr
Have you updated your 9r for A12 ? If yes, how did you do it? Would it be possible to go from A11 (11.2.8.8) to A12 (C.33)?
Hi guys so Many users are facing issue while they are rooted and twrp installed on there phone.
They can't able to Flash update through stock settings OR via twrp if they tries to flash it via twrp manually facing no wifi and Bluetooth.
So here is the process to flash any incremental update via twrp just we need update zip, vbmeta image and boot image of old oos version respective to your new update means if. We are upgrading to V11 we need V10 boot img
U can use following commands to extract your current stock boot img after connecting to PC
adb shell
dd if=/dev/block/sdc49 of=/sdcard/boot.img
exit
Note: Remember this process will replace your twrp and removes root to gain root access. We need to repeat twrp installation shown in the following tutorial
TUTORIAL TWRP AND ROOT NORD 2 OXYGEN OS 11 ( Links updated!)
SO finally I successfully rooted with TWRP and root access.thanks to all developers @Eastw1ng @TheMalachite Following are all download links combined in one post Also there are two threads like unlocking boot loader and twrp but there are some...
forum.xda-developers.com
You can gain root acess only by flashing magisk.zip file after step no 7 given under instructions but I didn't tested it yet.
DOWNLOADS:
1)Download update v11 from Telegram :
®D$ in OnePlus Nord 2 Community
t.me
2) DOWNLOAD V13:
®D$ in OnePlus Nord 2 Community
t.me
3) Download V14 update zip:
️ in OnePlus Nord 2 Community
t.me
4) Download A15 update zip:
e9708c8610bae8fa64d76e0f9a55dda444ce981a.zip
drive.google.com
We can also download update in system update process. Just download OTA update and when we boot in twrp just click install and then go to following folder there you will find update.zip
/data/OTA-package/update.zip
5)A17 update zip:
https://t.me/OnePlusNord2GlobalOfficial/81364
Download vbmeta:
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download boot.img:
1) upgrade from v10 to v11(indian)
boot.img
drive.google.com
2) upgrade from v11 to v13(indian)
bootnew.img
drive.google.com
3)Upgrade from v13 to v14:
Rose in OnePlus Nord 2 Community
t.me
4)Upgrade from A14 to A15:
Rose in OnePlus Nord 2 Community
t.me
5)15 Boot img india (update from A15 to AA16)
https://t.me/OnePlusNord2GlobalOfficial/57795
5)A16 boot.img to upgrade to A17:
Rose in OnePlus Nord 2 Community
A16 stock boot image
t.me
6)17 BOOT IMG Upgrade to A18 (boot.img vbmeta zip extract file)
Rose in OnePlus Nord 2 Community
t.me
Boot img for nord 2 EU REGION :
File folder on MEGA
mega.nz
This another thread for all boot img of EU region
Stock Boot & Patched images Oneplus Nord 2 Oxygen 11.3 DN2103_11_A.07/09/10 EEA
Flash at your own risk. I am not responsible for any damage or data loss to the device during this process! https://mega.nz/folder/fZx2nBaR#Q33lJstFRMQg6_0j7Z0TJw Special Thanks: @HofaTheRipper @phhusson
forum.xda-developers.com
Instructions :
1) Download all file from the link given under this thread place them at one place on your phone so it can be easily accessible when we boot in TWRP.
2)Now to boot in TWRP use following root acess app called as advance reboot. Open it and click reboot to recovery
Advanced Reboot Tools [ROOT] - Apps on Google Play
Provides lots of options for restarting your device; excellent for tweakers.
play.google.com
Or you can use adb command after connecting phone to pc in USB debugging mode.
adb reboot recovery
3) when phone boot in TWRP click install tab now go to folder where we placed All files.
4) click install image tab at bottom now you we see image files boot. img and vbmeta.img that we downloaded
5)now select boot.img and then select boot partation and slide bottom bar after successful installation
6)click reboot and select recovery phone will boots back to twrp( This step is optional)
7)Now again click Install and find our old folder now select update.zip file and slide bottom bar it will take 2min for complete falshing of zip.
8)now agian click install now click install image and select vbmeta.img
9)Now click reboot system phone will reboots and take 10min.
Now you are successfully updated and have new OOS 11.3 A11 version on your phone without any issues.
Follow the video:
New update v13 update process :
New update A14 update process:
New update A15:
New update A16:
New A18 update:
pankspoo said:
Hi guys so Many users are facing issue while they are rooted and twrp installed on there phone.
They can't able to Flash update via twrp if they tries to flash it via twrp manually facing no wifi and Bluetooth.
So here is the process to flash any incremental update via twrp just we need update zip, vbmeta image and boot image of old oos version respective to your new update means if. We are upgrading to V11 we need V10 boot img.
Follow the video:
Click to expand...
Click to collapse
good Instructions! Reboot after flashing boot.img isnt necessary. OTA Update zip can be downloaded within OTA App in Settings (do not press reboot). After downloading you can reboot to TWRP and the file location is: /data/OTA-package/update.zip.
HofaTheRipper said:
good Instructions! Reboot after flashing boot.img isnt necessary. OTA Update zip can be downloaded within OTA App in Settings (do not press reboot). After downloading you can reboot to TWRP and the file location is: /data/OTA-package/update.zip.
Click to expand...
Click to collapse
Yes but I don't want to go to automatic reboot and flashing process of OTA Update installation after download which may cause some issues for new users.
The old boot.img I image is the stock one not rooted right? How can you extract it from your firmware if you're not rooted? From the Nandroid backup maybe?
Edit, found out: https://forum.xda-developers.com/t/how-to-extract-your-boot-img-from-any-rom-adb.3760210/ Just had to google it
Don't wo
Raygen said:
The old boot.img I image is the stock one not rooted right? How can you extract it from your firmware if you're not rooted? From the Nandroid backup maybe?
Click to expand...
Click to collapse
Donts worry from here every new updates we will provide all stock boot. img
Thread updated for latest update v13 for India region
HI. This is my 1st OnePlus and OxygenOS. I am now on DN2103_11_A.11 and OTA is available. It is DN2103_11_A.12
Basically I can flash it from TWRP and I do not need to save and flash boot.img afterwards bec OS will be the same version. Is that so? Or am I wrong? And I have to follow threads instructions ?
Thank you
jis251 said:
HI. This is my 1st OnePlus and OxygenOS. I am now on DN2103_11_A.11 and OTA is available. It is DN2103_11_A.12
Basically I can flash it from TWRP and I do not need to save and flash boot.img afterwards bec OS will be the same version. Is that so? Or am I wrong? And I have to follow threads instructions ?
Thank you
Click to expand...
Click to collapse
NO u need A11 boot img of only DN 2103 firmware not indian I don't have that now first flash that then flash update zip of v12 then flash Vbmeta now that's done
pankspoo said:
NO u need A11 boot img of only DN 2103 firmware not indian I don't have that now first flash that then flash update zip of v12 then flash Vbmeta now that's done
Click to expand...
Click to collapse
HI. And thx for quick reply. I mange now, thank you.
DN2103 A.11 stock boot img :
HofaTheRipper said:
DN2103 A.11 stock boot img :
Click to expand...
Click to collapse
You got it do it now
HofaTheRipper said:
DN2103 A.11 stock boot img :
Click to expand...
Click to collapse
HI and thx. I have made TWRP backup, boot and vbmeta
So I can first restore boot then flash OTA and then restore vbmeta, yes? (Version 11)
I do not have to flash boot and vbmeta, restore does the same??
jis251 said:
HI and thx. I have made TWRP backup, boot and vbmeta
So I can first restore boot then flash OTA and then restore vbmeta, yes? (Version 11)
I do not have to flash boot and vbmeta, restore does the same??
Click to expand...
Click to collapse
Don't use backup boot image restore process.
Just download above boot image given
https://forum.xda-developers.com/attachments/boot_stock_a11-img.5461307/
and vbmeta image given in. My thread
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
And u r update zip of device of your region not mine
First flash boot img then. Install update zip then. Flash Vbmeta done
pankspoo said:
Don't use backup boot image restore process.
Just download above boot image given
https://forum.xda-developers.com/attachments/boot_stock_a11-img.5461307/
and vbmeta image given in. My thread
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
And u r update zip of device of your region not mine
First flash boot img then. Install update zip then. Flash Vbmeta done
Click to expand...
Click to collapse
Thx. OK I do that.
Magisk is installed (patched) to boot image so after OTA and Vbmeta I flash Magisk to keep root.
jis251 said:
Thx. OK I do that.
Magisk is installed (patched) to boot image so after OTA and Vbmeta I flash Magisk to keep root.
Click to expand...
Click to collapse
Yes
pankspoo said:
Download boot.img:
1) upgrade from v10 to v11(indian)
boot.img
drive.google.com
2) upgrade from v11 to v13(indian)
bootnew.img
drive.google.com
Click to expand...
Click to collapse
Do the boot.img files in the original post only work on the Indian variant? Where can I get the A11 boot.img for the European variant if I want to update to A12?
NetSoerfer said:
Do the boot.img files in the original post only work on the Indian variant? Where can I get the A11 boot.img for the European variant if I want to update to A12?
Click to expand...
Click to collapse
Ok I will upload in thread
NetSoerfer said:
Do the boot.img files in the original post only work on the Indian variant? Where can I get the A11 boot.img for the European variant if I want to update to A12?
Click to expand...
Click to collapse
File folder on MEGA
mega.nz
Use boot images from stock folder
pankspoo said:
U can use following commands to extract your current stock boot img after connecting to PC
adb shell
dd if=/dev/block/sdc49 of=/sdcard/boot.img
exit
Click to expand...
Click to collapse
Still trying to wrap my head around this (although updating worked fine from A11 to A12 on my EEA variant, thanks @pankspoo!).
Can I actually extract a stock boot.img from a Magisk-rooted phone? Is it stock (in which case why is root removed by the update.zip) or is it modified (in which case, why can I extract it as stock)?
NetSoerfer said:
Still trying to wrap my head around this (although updating worked fine from A11 to A12 on my EEA variant, thanks @pankspoo!).
Can I actually extract a stock boot.img from a Magisk-rooted phone? Is it stock (in which case why is root removed by the update.zip) or is it modified (in which case, why can I extract it as stock)?
Click to expand...
Click to collapse
You can use those adb commands while booted in TWRP, without being rooted. So you'll extract the stock boot image
is it possible to install a GSI rom without TWRP?
It is possible but involves a heck ton of work you basically need to extract an entire GSI and compress each file using lz4 then repack them the way Samsung does and flash using Odin
The work involved in repacking the GSI in Samsung's format when there is no guarantee what issues the GSi will coz with the device makes it not a very suitable option
But yeah you can try for the heck of it, here's a thread that might help you
[GUIDE] [CUSTOM] How to Install Custom ROM using ODIN without TWRP [PHH] [LineageOS]
Hello, This would be a short & sweet guide on how to install a custom ROM on your Samsung using ODIN. I'm going to tailored this guide for the S10e G9700 HK version (is the phone I own) I'm a linux user but Odin only runs on Windows so this...
forum.xda-developers.com
Insomniac05 said:
It is possible but involves a heck ton of work you basically need to extract an entire GSI and compress each file using lz4 then repack them the way Samsung does and flash using Odin
The work involved in repacking the GSI in Samsung's format when there is no guarantee what issues the GSi will coz with the device makes it not a very suitable option
But yeah you can try for the heck of it, here's a thread that might help you
[GUIDE] [CUSTOM] How to Install Custom ROM using ODIN without TWRP [PHH] [LineageOS]
Hello, This would be a short & sweet guide on how to install a custom ROM on your Samsung using ODIN. I'm going to tailored this guide for the S10e G9700 HK version (is the phone I own) I'm a linux user but Odin only runs on Windows so this...
forum.xda-developers.com
Click to expand...
Click to collapse
ok i'll try it thank you!
Insomniac05 said:
It is possible but involves a heck ton of work you basically need to extract an entire GSI and compress each file using lz4 then repack them the way Samsung does and flash using Odin
The work involved in repacking the GSI in Samsung's format when there is no guarantee what issues the GSi will coz with the device makes it not a very suitable option
But yeah you can try for the heck of it, here's a thread that might help you
[GUIDE] [CUSTOM] How to Install Custom ROM using ODIN without TWRP [PHH] [LineageOS]
Hello, This would be a short & sweet guide on how to install a custom ROM on your Samsung using ODIN. I'm going to tailored this guide for the S10e G9700 HK version (is the phone I own) I'm a linux user but Odin only runs on Windows so this...
forum.xda-developers.com
Click to expand...
Click to collapse
I have tried the tutorial but in the tutorial it says I need
boot.img.lz4
dqmdbg.img.ext4.lz4
dtbo.img.lz4
persist.img.ext4.lz4
recovery.img.lz4
system.img.ext4.lz4
userdata.img.ext4.lz4
vbmeta.img.lz4
vendor.img.ext4.lz4
these files but I only have
boot.img.lz4
dtbo.img.lz4
recovery.img.lz4
system.img.ext4.lz4
userdata.img.ext4.lz4
vbmeta.img.lz4
And when I flash it like it says in the tutorial I cannot flash system.img.ext4 and fails
Is there anymore ways to do this? tried it with Lineage OS 19.0
GyuminLeo said:
I have tried the tutorial but in the tutorial it says I need
boot.img.lz4
dqmdbg.img.ext4.lz4
dtbo.img.lz4
persist.img.ext4.lz4
recovery.img.lz4
system.img.ext4.lz4
userdata.img.ext4.lz4
vbmeta.img.lz4
vendor.img.ext4.lz4
these files but I only have
boot.img.lz4
dtbo.img.lz4
recovery.img.lz4
system.img.ext4.lz4
userdata.img.ext4.lz4
vbmeta.img.lz4
And when I flash it like it says in the tutorial I cannot flash system.img.ext4 and fails
Is there anymore ways to do this? tried it with Lineage OS 19.0
Click to expand...
Click to collapse
not really since samsung has no fastboot mode
try renaming system.img.ext4.lz4 as super.img.lz4 as that's the name of the file in stock
Insomniac05 said:
not really since samsung has no fastboot mode
try renaming system.img.ext4.lz4 as super.img.lz4 as that's the name of the file in stock
Click to expand...
Click to collapse
will try it now
Insomniac05 said:
not really since samsung has no fastboot mode
try renaming system.img.ext4.lz4 as super.img.lz4 as that's the name of the file in stock
Click to expand...
Click to collapse
So the flash itself went well without any errors. But the tablet is in a boot loop. When it boots Samsung Galaxy logo appears and reboots. This tablet is running Android 11 so do I need to install Android 11 Lineage OS?
GyuminLeo said:
So the flash itself went well without any errors. But the tablet is in a boot loop. When it boots Samsung Galaxy logo appears and reboots. This tablet is running Android 11 so do I need to install Android 11 Lineage OS?
Click to expand...
Click to collapse
Nope don't think the android version would have anything to do with it is probably the os not working properly
Maybe try some other GSI like pixel experience to see if they work
GyuminLeo said:
So the flash itself went well without any errors. But the tablet is in a boot loop. When it boots Samsung Galaxy logo appears and reboots. This tablet is running Android 11 so do I need to install Android 11 Lineage OS?
Click to expand...
Click to collapse
I think you should try Android 11 Lineage OS
Insomniac05 said:
Nope don't think the android version would have anything to do with it is probably the os not working properly
Maybe try some other GSI like pixel experience to see if they work
Click to expand...
Click to collapse
Same thing happens with AOSP GSI image
thatha said:
I think you should try Android 11 Lineage OS
Click to expand...
Click to collapse
I downloaded the zip file but there is no system.img file. Is there a way to extract the img file?
If I have twrp or any custom recovery can I just install it with the zip file?
GyuminLeo said:
I downloaded the zip file but there is no system.img file. Is there a way to extract the img file?
If I have twrp or any custom recovery can I just install it with the zip file?
Click to expand...
Click to collapse
Yes with a recovery u can straight up flash the zip file
Insomniac05 said:
Yes with a recovery u can straight up flash the zip file
Click to expand...
Click to collapse
But does the A7 Lite have a custom recovery? I have searched alot but no juice
GyuminLeo said:
But does the A7 Lite have a custom recovery? I have searched alot but no juice
Click to expand...
Click to collapse
Nope it does not
Insomniac05 said:
Nope it does not
Click to expand...
Click to collapse
Is there a way to flash this zip file?
GyuminLeo said:
Is there a way to flash this zip file?
Click to expand...
Click to collapse
Well you can extract the contents using something like winrar or 7zip and then try building an Odin flashable md5 like you did for the last one
Insomniac05 said:
Nope it does not
Click to expand...
Click to collapse
Is there a way to port a twrp image for the A7 Lite?
GyuminLeo said:
Is there a way to port a twrp image for the A7 Lite?
Click to expand...
Click to collapse
Samsung's stock recovery is kinda strange so not sure if it could be used with some other device' twrp then mixed and mashed together to port the twrp
Probably needs to be built from the ground up
Insomniac05 said:
Samsung's stock recovery is kinda strange so not sure if it could be used with some other device' twrp then mixed and mashed together to port the twrp
Probably needs to be built from the ground up
Click to expand...
Click to collapse
Oh ok thanks. And I was able to root this device but can I install a custom rom from that state? Tab was rooted with Samsung's default firmware with magisk installed
GyuminLeo said:
Oh ok thanks. And I was able to root this device but can I install a custom rom from that state? Tab was rooted with Samsung's default firmware with magisk installed
Click to expand...
Click to collapse
Nope rooting has no role in flashing custom roms that all is recovery dependent