Does the phone have ambient notifications ? (the notifications that show briefly on the screen when locked) It should be in the display section.
I have the Mi A1 which has Android One and this is a base feature of the product, so whenever I receive a notification, the phone screen briefly lights up, shows the notification summary, then fades out.
Thanks for the help.
I think it depends on theme
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
Yes, it has such possibility. It is located in "Lock screen & password" section and is called "Wake Lock screen for notifications". Was using it without any problems with both POCO and Nova launchers.
can anyone provide a picture of it in action ? Thanks!
If you want to see how such notification works - there is not much to show, in my case it looks exactly like e.g. in this article https://www.phonearena.com/news/How...-your-lock-screen-on-Android-Lollipop_id66572
Important point: after switching it on using the switch in "Lock screen & password", go to "Advanced settings" there and select how the notifications should be shown: notifications with content, without content or no notifications at all. If I'm not mistaken, you have to enable lock screen notification for each application you need to show notifications on lock screen (Installed applications -> tap on e.g. Messages app, tap on Notifications and there you can turn on lock screen notifications.
thanks katoda! so it's just a matter of turning on the screen to show the notifications then turning it back off again a bit later.
I thought there was some kind of special screen like they in the attachment below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Only amoled devices support always on display
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
I thinks that such effect makes sense only on OLED screens, where showing such notification permanently does not use much energy - only white dots consume it. For LCD screens, like on Poco, the entire screen must be powered on, including backlit, so you can imagine the impact on battery life.
But, of course, it is possible from technical point of view. I remember having a ROM on Moto G 4G some time ago with such an option.
Related
Many Mi 5 users with JDI display panle might have seen that the screen tone is warm compared to some other Xiaomi phones (3s prime). The screen stays yellowish no matter what color option you choose in display settings. Though the saturation of the display is good, but the white balance is bad in my opinion. I have found a way to slightly fix the warm tone with an app called "Screen Balance" which is available in Play Store for free. You can give it a try and see if it fixes your problem or not.
Here is the settings I am using for my Mi 5. Give it a try or calibrate in your own way.
Search in play store with the app name. It's easy to find. :fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
alone_in_dark said:
Many Mi 5 users with JDI display panle might have seen that the screen tone is warm compared to some other Xiaomi phones (3s prime). The screen stays yellowish no matter what color option you choose in display settings. Though the saturation of the display is good, but the white balance is bad in my opinion. I have found a way to slightly fix the warm tone with an app called "Screen Balance" which is available in Play Store for free. You can give it a try and see if it fixes your problem or not.
Here is the settings I am using for my Mi 5. Give it a try or calibrate in your own way.
Search in play store with the app name. It's easy to find. :fingers-crossed:
Click to expand...
Click to collapse
Noob questions but is it battery consuming? Does it apply an overlay or does it edit system files or sth. How do i know if i have jdi or lgd panel?
Sent from my MI 5 using Tapatalk
SilverMarcs said:
Noob questions but is it battery consuming? Does it apply an overlay or does it edit system files or sth. How do i know if i have jdi or lgd panel?
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
Nope.. It isn't consuming battery.. Using it for 3 days.. And it doesn't edit system file. Don't forget to lock it in recent apps.
Regarding Panel: Go to "About phone" and tap 5 times on 'kernel version".. It will enter into CIT.. Click on "Check version info".. From there, you can find your display info.
Guys, my navigation dock has turned from its mainly white color to a semi transparent light gray and it is harder for me to see it, depending what is there on the screen it can be almost invisible to see it.
This happened to me once, like a month ago, but it somehow reverted back to its whittish color (after phone restart or a theme change). However it has now been a couple of hours, I recharged the phone, changed some themes, restarted the phone a couple of times, but still the dock remains light gray and hard to see.
I also tried turning it off/on but still no change of its color.
Plz help.
This is on mate 10 pro. 129
Maybe u switched on eye comfort?
If nothing works its easier to factory reset phone.
Good luck
Nope, I tried eye comfort on/off as well. Nothing happens. The dock behaves as if the brightness was set to lowest, and after the brightness went higher the dock remained at lowest brightness setting.
Solved: changed the launcher, then turned the dock off/on
And I have another question, it is possible to change the color to transparent navbar? Is there any application
Wysłane z mojego BLA-L29 przy użyciu Tapatalka
lukaszsas12 said:
And I have another question, it is possible to change the color to transparent navbar? Is there any application
Wysłane z mojego BLA-L29 przy użyciu Tapatalka
Click to expand...
Click to collapse
Not really an answer to your question, but you dont really need NAV bar on mate 10. It will take only a day or two to get used to nav dock. As I presume your question is because you'd like to see the more screen possible. With nav bar off, and nav dock on, you will have that. I have not been using nav bar at all for the 99% of time that I used my m10pro. Nav dock only.
I would like to order was like the picture but that was not autohide
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wysłane z mojego BLA-L29 przy użyciu Tapatalka
Just get rid of the nav bar. Look how clean it is without it.
Yes I know but I want to nav bar but transparent
Wysłane z mojego BLA-L29 przy użyciu Tapatalka
Hi, can i ask the exact sequence you did to solve this problem?
I think I'm having the same problem as you do. It's not as white anymore and it's harder to see.
I'm using Nova launcher pro.
I tried switching to default, then switching back, then turning it on and off.
I tried turning it off, switching to default, then switching it back then turning it on..
Still no change.
Thanks in advance.
Double post
The other day it again turned pale for me, and I went for agressive few changes between the launchers, turning the phone on/off, but I have also turned nav dock on/off a few times, and all of a sudden it sprang back to life.
Just intensify these changes and the navdock will gain full luminousness.
I'm facing the same issue with my nav dock. It's irritating, because it should be something we shouldn't really have to bother about
I only get messages from Threema, if I open the App.
If the phone screen is off, the messages are not received, for the sender it looks like my Threema is offline.
I thought it is related to battery saving settings, but I disabled everything possible.
Threema is added to the exceptions for battery saver and is allowed to autostart.
Other app, like Google mail, can receive messages while the phone screen is off.
What else can I do?
Does anyone has the same issue?
You can lock it that memory management wouldn't kill it. To do that simply open recents and move this application down . You will see padlock. If you are on miui beta press and hold the application and you will see something like the picture
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
uremytoy said:
You can lock it that memory management wouldn't kill it. To do that simply open recents and move this application down . You will see padlock. If you are on miui beta press and hold the application and you will see something like the picture
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
Click to expand...
Click to collapse
Thanks for the hint, unfortunately it did not help.
There is the lock symbol now, but messages still cannot be received once the screen is off.
Not sure if this makes a difference, the messages can still be received maybe 60sec after the screen is off.
This is so strange, never had that before.
Have you done this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my POCOPHONE F1 using Tapatalk
uremytoy said:
Have you done this?View attachment 4608954
Sent from my POCOPHONE F1 using Tapatalk
Click to expand...
Click to collapse
Yes I did
Let me provide some screenshots later today, it's my wife's phone so I cannot create the screenshots now.
I changed four items:
- battery saver for Threema
- enabled autostart for Threema (your screenshot)
- disabled something like deep sleep mode for the phone (do not remember the name right now)
- locked Threema memory, like you suggested
Did you go in Threema Settings and activate Push Polling and stuff like this?
darkgizmo said:
Did you go in Threema Settings and activate Push Polling and stuff like this?
Click to expand...
Click to collapse
Last time when I looked, anything possible was enabled, but I will take a look later again and report the result.
darkgizmo said:
Did you go in Threema Settings and activate Push Polling and stuff like this?
Click to expand...
Click to collapse
The Threema settings forward to the battery saver settings.
Attached are my settings.
How to remove the first lock screen and show second lock screen right away without pressing anything.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just switched from Mi Max3 to black shark 3 pro.
For Mi Max 3, when I got notification while the screen was turned off. I got the information of that notification right away as in the picture. It's very convenient. Just glance at the screen and get information.
But for BS 3pro, when I got notification while the screen was turned off. It just make a sound and show only the black screen with fingerprint icon as I called "first lock screen".
I have to press power button or unlock it first to see information which is not convenient at all when compare to Mi Max3.
Is there any way to remove first lock screen? Please help.
And you can turn on raise to wake.
Cammarratta said:
And you can turn on raise to wake.
Click to expand...
Click to collapse
Thank you. But I still have to raise the phone. Is there any way to just "glance" at the information. 555
Already got used to the lazy way with mi max3.
how about always on screen. you can set it to recognise your face with face unlock and show your notifications or bring you straight to the home screen.
jananan said:
how about always on screen. you can set it to recognise your face with face unlock and show your notifications or bring you straight to the home screen.
Click to expand...
Click to collapse
I still have to raise the phone up or move my face to the phone. But I think it is the best way for this phone. Thank you. I appreciate your help.
LessIsEvenMore said:
I still have to raise the phone up or move my face to the phone. But I think it is the best way for this phone. Thank you. I appreciate your
there is option to light up screen when notification comes and there is option for face unlock when screen lights up.
Click to expand...
Click to collapse
I've set up fingerprint app lock. In the unlock screen, the display appears bright on the right and black on the left. Until this morning, everything was always black on these screens. Now I don't know why it turns on the LEDs on the right. The photo exaggerates the effect but it is evident. By setting the brightness to the minimum everything is normal; Raising it a little, it begins to be noticed. This problem is present only on these screens (during the unlock of apps) and nowhere else. How can I fix it?
thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Check if Edge Lightning is disabled
Quake94 said:
Check if Edge Lightning is disabled
Click to expand...
Click to collapse
I tried to activate and deactivate it but nothing changes. I have also downloaded several apps to test the screen and trying with all types of lighting I don't have any problems. Could it be something related to the fingerprint reader?
Fabio07 said:
I've set up fingerprint app lock. In the unlock screen, the display appears bright on the right and black on the left. Until this morning, everything was always black on these screens. Now I don't know why it turns on the LEDs on the right. The photo exaggerates the effect but it is evident. By setting the brightness to the minimum everything is normal; Raising it a little, it begins to be noticed. This problem is present only on these screens (during the unlock of apps) and nowhere else. How can I fix it?
thank you
View attachment 5661465
Click to expand...
Click to collapse
Try unlocking with and without DC Dimming. It's in Developer Settings, see if anything changes
It may be a silly suggestion but make sure the lockscreen wallpaper is pure black
This is a common issue with most optical scanners. With somewhat grey background such as yours, the partial lighting up of the amoled can disclose all the uneven calibration. This can be minimised to a greater degree with software updates, like how Apple, Samsung or even Vivo did. In my GT2 Pro this issue is absent in general.
I contacted Realme support and they suggested I send it to the warranty repair center. Could they improve calibration or replace the entire display? Or is it useless to send him for assistance?