Related
hello guys
I have bought 4gb version from china 1.5 year ago(I dont know which version is row or china) I upgraded it to vibeui so I lost my singals (after using 2 months without a problem)
My baseband version is p780.v102, 2014/11/11 11:10 and build number vibeui_v2.0_1447_7.48.1_st_p780_baralajbi
So I need your help I even dont know which version I have.. Should I upgrade radio firmware etc???
alperen yagci said:
hello guys
I have bought 4gb version from china 1.5 year ago(I dont know which version is row or china) I upgraded it to vibeui so I lost my singals (after using 2 months without a problem)
My baseband version is p780.v102, 2014/11/11 11:10 and build number vibeui_v2.0_1447_7.48.1_st_p780_baralajbi
So I need your help I even dont know which version I have.. Should I upgrade radio firmware etc???
Click to expand...
Click to collapse
Hi. Lets check first your IMEI. So.. dial *#06# and see if your IMEI are there!
If you have IMEI you must check if you have custom recovery like TWRP, CWM, CARLIV, ETC, ETC.
If you have custom recovery things are easy.
Go to General section/How about some modems post. Download KitKat modems and flash untill you have signal.
If you dont have custom recovery you must install one.
Go to Q&A section / Rooting tutorial for KitKat. There you will find an tutorial to how to!
Tell us where you dont know !
stympy said:
Hi. Lets check first your IMEI. So.. dial *#06# and see if your IMEI are there!
If you have IMEI you must check if you have custom recovery like TWRP, CWM, CARLIV, ETC, ETC.
If you have custom recovery things are easy.
Go to General section/How about some modems post. Download KitKat modems and flash untill you have signal.
If you dont have custom recovery you must install one.
Go to Q&A section / Rooting tutorial for KitKat. There you will find an tutorial to how to!
Tell us where you dont know !
Click to expand...
Click to collapse
yes İmeis are there also I found lots of modems thank you for that link now I m trying to install twrp but I could not make it because so many post out there which one is fitting I dont know I tried to flash twrp with mobile uncle but did not work so if you have any opinion it would be great thank you so so much again..
alperen yagci said:
yes İmeis are there also I found lots of modems thank you for that link now I m trying to install twrp but I could not make it because so many post out there which one is fitting I dont know I tried to flash twrp with mobile uncle but did not work so if you have any opinion it would be great thank you so so much again..
Click to expand...
Click to collapse
In those tools uploaded there is one called: Baralajbi v2.0_TWRP_v2.8.4.0 rev2 CN.zip
Download that one.
1. Install MobileUncle Tool. Unzip recovery.img
2. Copy that recovery.img to your internal memory
3. Start MUT grant root rights and go to recovery update
4. Look there for the first recovery that appears.
5. Select and install.
6. After flash reboot to recovery. That is it.
7. Tell me if you dont manage.
8. Good luck.
stympy said:
In those tools uploaded there is one called: Baralajbi v2.0_TWRP_v2.8.4.0 rev2 CN.zip
Download that one.
1. Install MobileUncle Tool. Unzip recovery.img
2. Copy that recovery.img to your internal memory
3. Start MUT grant root rights and go to recovery update
4. Look there for the first recovery that appears.
5. Select and install.
6. After flash reboot to recovery. That is it.
7. Tell me if you dont manage.
8. Good luck.
Click to expand...
Click to collapse
At this point I have tried to find Baralajbi v2.0_TWRP_v2.8.4.0 rev2 CN.zip as you said but I found just twrp v2840 rev2 p780cn from here https://drive.google.com/folderview...ZETnJUcFFMMXpGc0s5RWNBNTRCanU5SzA&usp=sharing
I updated Mobileuncle and it has grant access from supersu I unzipped the img file and coppied to internal storage then tried to flash but it started stock recovery I tried for row version of twrp but as same as first https://drive.google.com/file/d/0BxtqVxj5hQ6zVEtHZ2dGa2RvYjg/view
I think I could not find right recovery
alperen yagci said:
At this point I have tried to find Baralajbi v2.0_TWRP_v2.8.4.0 rev2 CN.zip as you said but I found just twrp v2840 rev2 p780cn from here https://drive.google.com/folderview...ZETnJUcFFMMXpGc0s5RWNBNTRCanU5SzA&usp=sharing
I updated Mobileuncle and it has grant access from supersu I unzipped the img file and coppied to internal storage then tried to flash but it started stock recovery I tried for row version of twrp but as same as first https://drive.google.com/file/d/0BxtqVxj5hQ6zVEtHZ2dGa2RvYjg/view
I think I could not find right recovery
Click to expand...
Click to collapse
Read one by one those files attached there. Not from google drive.
stympy said:
Read one by one those files attached there. Not from google drive.
Click to expand...
Click to collapse
sorry I did not get it what do you mean "there"? could you share link?
alperen yagci said:
sorry I did not get it what do you mean "there"? could you share link?
Click to expand...
Click to collapse
Link: http://forum.xda-developers.com/attachment.php?attachmentid=3391258&d=1436077611
I still could not menage it nothing changed with this recovery just going to same stock recovery page nothing else.. is there a row version of barajbi for p780? so apreciate for helping by the way
alperen yagci said:
I still could not menage it nothing changed with this recovery just going to same stock recovery page nothing else.. is there a row version of barajbi for p780? so apreciate for helping by the way
Click to expand...
Click to collapse
What you have is ROW from Baralajbi.
This firmware is an impruved part of chinese firmware.
If you want to install a custom recovery take a screenshot of your firmware and post here.
The screenshot must be from: Settings/About Phone so i can see your firmware name and your modem.
If you want to do a team viewer session PM me.
Let me know your country so i know what time you are, like +2, +3, +4, etc
thank you for much helping stympy I was little busy so I could not reply I m gonna send a pm thank you again
I've installed a pre-rooted .575 and now I need to instal TWRP recovery I need help
See this post: http://forum.xda-developers.com/xperia-z2/general/rom-xperia-z2-d6503-custom-23-5-0-575r3d-t3383257
It will help you
VampireK99 said:
I've installed a pre-rooted .575 and now I need to instal TWRP recovery I need help
Click to expand...
Click to collapse
Follow the instructions in this post using a PC:
http://forum.xda-developers.com/showpost.php?p=66232079&postcount=376
Do you have recovery?
michel090428 said:
Follow the instructions in this post using a PC:
http://forum.xda-developers.com/showpost.php?p=66232079&postcount=376
Click to expand...
Click to collapse
Flash abricot kernel:
http://forum.xda-developers.com/xperia-z2/orig-development/kernel-abricot-kernel-v3-t2965480
twrp 3.0.2 included, working
cant install recovery
michel090428 said:
Follow the instructions in this post using a PC:
http://forum.xda-developers.com/showpost.php?p=66232079&postcount=376
Click to expand...
Click to collapse
I have the same issue can install recovery after flash pre root zip .575
i have follow instruction and check the file you state before but there seem doesnt exist. what should i do to install recovery back? please help
PierceSirens said:
I have the same issue can install recovery after flash pre root zip .575
i have follow instruction and check the file you state before but there seem doesnt exist. what should i do to install recovery back? please help
Click to expand...
Click to collapse
what error are you having in the command window. please copy paste the text.
I am releasing today a updated version of TWRP for the Samsung Galaxy J700P. This project was rebuilt by me using the 6.01 Stock Kernel instead of the 5.1 kernel that is used in the first release. I also noticed that in the original TWRP the partitions were not setup correctly for backup. If you did a backup in the first copy it had EFS as a option in the backup list and when you select that and do a restore it will cause the phone to soft brick to the point even the stock rom couldn't fix it. The EFS partition wasn't restoring correctly due the configuration in the recovery.FSTAB it was erasing the modemst1 and modemst2 partitions so i reconfigured the FSTAB to support all partitions on the phone itself enabling you to make the correct backups/restores of the phone. I renamed the assert to it's default name which is j7ltespr so it makes it even easier to make custom roms flash correctly without error. Remember this is still in BETA i will be releasing a FINAL build very very soon.
REQUIREMENTS:
Odin 3.10/3.11(For Flashing TWRP)
Install Instructions:
1.Download TAR file from forum (LINK BELOW)
2. Put Phone in Download Mode(When phone is off press buttons:VOLUME DOWN+HOME+POWER Press VOLUME UP to continue)
3.Open Odin up and select AP Then select the file where ever you downloaded the Twrp Tar file from this forum
4. ENJOY!
________________________________________________
Fix for Soft Brick:
NOTES: Use this only if you used the first TWRP and did a backup and restore and it soft bricked your J700P phone! You may need to do a factory reset to get things working right again or even use the stock firmware TAR file for your J700P phone variant (BOOST,SPRINT,VIRGIN MOBILE)
REQUIREMENTS:
1. twrp from this forum (LINK BELOW)
2. External SD (If you decide you want to use the Internal SD instead of the External SD, in step 5. type cd /sdcard instead of cd /external_sd then continue on with step 6)
Install Instructions:
1. Download modem files.zip (LINK BELOW)
2. Extract modem files to external SD
3. Enter Recovery Mode (When Phone is off press and hold buttons VOLUME UP+HOME+POWER until TWRP loads)
4. Click Advanced then click on Terminal
5. Type cd /external_sd and press ENTER
6. Type flash_image /dev/block/mmcblk0p14 modemst1.img and press ENTER
7. Type flash_image /dev/block/mmcblk0p15 modemst2.img and press ENTER
8. DONE!
DOWNLOAD LINKS:
modem.zip:
https://drive.google.com/file/d/0B6_i7gSz4xn3S3VLaWlNY3JjQmM/view?usp=drivesdk
twrp-3.0.2.0-j7ltespr.tar:
https://drive.google.com/file/d/0B6_i7gSz4xn3VlZUTjNOR182dTg/view?usp=drivesdk
-----------------AS ALWAYS USE CAUTION!!!---------------
Bugs: MTP not working already know the problem and it will be fixed in the next build!
Like What I do? Hit the :good:!
Credits: messi2050 for the help with most of the files needed for making this possible!
oh ****, that's what broke my j7, then. nice work!
Ur quite welcome!
Starchild2k said:
Ur quite welcome!
Click to expand...
Click to collapse
HOLY CRAP IT WORKS AGAIN! You're a genius! You need any help for anything (like testing), talk to me. Have you restored the IMEI at all?
minz1 said:
HOLY CRAP IT WORKS AGAIN! You're a genius! You need any help, talk to me. Have you restored the IMEI at all?
Click to expand...
Click to collapse
yes I have! I am currently using this as my main phone. Anyways if your having problems getting the IMEI to register to the phone then you may have to contact your carrier and get your MSL code from them they will know what number to give you! After getting the MSL code write it down for safe keeping and then go to the dialer and press ##786# The RTN menu will come up and click on reset and put in your MSL code for your phone and it will wipe the phone completely and then ur good to go for re-activation.
Starchild2k said:
yes I have! I am currently using this as my main phone. Anyways if your having problems getting the IMEI to register to the phone then you may have to contact your carrier and get your MSL code from them they will know what number to give you! After getting the MSL code write it down for safe keeping and then go to the dialer and press ##786# The RTN menu will come up and click on reset and put in your MSL code for your phone and it will wipe the phone completely and then ur good to go for re-activation.
Click to expand...
Click to collapse
okay, i've sent an email out to boost for this. i'm so happy
minz1 said:
okay, i've sent an email out to boost for this. i'm so happy
Click to expand...
Click to collapse
Just call the 1800 number and speak to a representative and ask them for it they will give it to you.
Starchild2k said:
Just call the 1800 number and speak to a representative and ask them for it they will give it to you.
Click to expand...
Click to collapse
wow, i have my imei back, even after wiping efs. thanks a ton, man! you're stupid awesome.
minz1 said:
wow, i have my imei back, even after wiping efs. thanks a ton, man! you're stupid awesome.
Click to expand...
Click to collapse
Awesome im so glad u got it up and running smoothly. Just to let u know besides of my cm13 project i am going to go ahead a create a deodexed and debloated firmware based off the latest stock firmware should have it ready by later on today if not by tomorrow
Starchild2k said:
Awesome im so glad u got it up and running smoothly. Just to let u know besides of my cm13 project i am going to go ahead a create a deodexed and debloated firmware based off the latest stock firmware should have it ready by later on today if not by tomorrow
Click to expand...
Click to collapse
sounds great man. send me a link when you're done
holy ****balls you are awesome!!!!!! My phone works again thanks to this helpful thread! Now i am no longer stuck with the lg stylo 2 I had to buy to use until i fixed this. I w as actually going to send this back to samsung and have them fix it then i thought let me check the forums one last time bfore i ship it out/. Dude you rule thank you so much.
Wow! So other than MTP, this is a fully functional TWRP for the J700P? Also when an MTP update is available we'll be able to flash it from this one?
I've never used MTP from a recovery myself so I'll just use this one when I'm next home.
Thanks so much.
How does one add Aroma File Manager to this?
Starchild2k said:
I am releasing today a updated version of TWRP for the Samsung Galaxy J700P. This project was rebuilt by me using the 6.01 Stock Kernel instead of the 5.1 kernel that is used in the first release. I also noticed that in the original TWRP the partitions were not setup correctly for backup. If you did a backup in the first copy it had EFS as a option in the backup list and when you select that and do a restore it will cause the phone to soft brick to the point even the stock rom couldn't fix it. The EFS partition wasn't restoring correctly due the configuration in the recovery.FSTAB it was erasing the modemst1 and modemst2 partitions so i reconfigured the FSTAB to support all partitions on the phone itself enabling you to make the correct backups/restores of the phone. I renamed the assert to it's default name which is j7ltespr so it makes it even easier to make custom roms flash correctly without error. Remember this is still in BETA i will be releasing a FINAL build very very soon.
REQUIREMENTS:
Odin 3.10/3.11(For Flashing TWRP)
Install Instructions:
1.Download TAR file from forum (LINK BELOW)
2. Put Phone in Download Mode(When phone is off press buttons:VOLUME DOWN+HOME+POWER Press VOLUME UP to continue)
3.Open Odin up and select AP Then select the file where ever you downloaded the Twrp Tar file from this forum
4. ENJOY!
________________________________________________
Fix for Soft Brick:
NOTES: Use this only if you used the first TWRP and did a backup and restore and it soft bricked your J700P phone! You may need to do a factory reset to get things working right again or even use the stock firmware TAR file for your J700P phone variant (BOOST,SPRINT,VIRGIN MOBILE)
REQUIREMENTS:
1. twrp from this forum (LINK BELOW)
2. External SD (If you decide you want to use the Internal SD instead of the External SD, in step 5. type cd /sdcard instead of cd /external_sd then continue on with step 6)
Install Instructions:
1. Download modem files.zip (LINK BELOW)
2. Extract modem files to external SD
3. Enter Recovery Mode (When Phone is off press and hold buttons VOLUME UP+HOME+POWER until TWRP loads)
4. Click Advanced then click on Terminal
5. Type cd /external_sd and press ENTER
6. Type flash_image /dev/block/mmcblk0p14 modemst1.img and press ENTER
7. Type flash_image /dev/block/mmcblk0p15 modemst2.img and press ENTER
8. DONE!
DOWNLOAD LINKS:
modem.zip:
https://drive.google.com/file/d/0B6_i7gSz4xn3S3VLaWlNY3JjQmM/view?usp=drivesdk
twrp-3.0.2.0-j7ltespr.tar:
https://drive.google.com/file/d/0B6_i7gSz4xn3VlZUTjNOR182dTg/view?usp=drivesdk
-----------------AS ALWAYS USE CAUTION!!!---------------
Bugs: MTP not working already know the problem and it will be fixed in the next build!
Like What I do? Hit the :good:!
Credits: messi2050 for the help with most of the files needed for making this possible!
Click to expand...
Click to collapse
Can you develop a TWRP for galaxy j7 sm-j7109, it will be a huge relief for the owners of these devices.
Thanks
androgeek2010 said:
Can you develop a TWRP for galaxy j7 sm-j7109, it will be a huge relief for the owners of these devices.
Thanks
Click to expand...
Click to collapse
dump boot.img recovery.img and the build.prop for your device please.
minz1 said:
dump boot.img recovery.img and the build.prop for your device please.
Click to expand...
Click to collapse
I have tried my best to extract these files correctly, however you can ask me if these are incorrect.
Thanks
minz1 said:
dump boot.img recovery.img and the build.prop for your device please.
Click to expand...
Click to collapse
Recovery galaxy j7109
minz1 said:
dump boot.img recovery.img and the build.prop for your device please.
Click to expand...
Click to collapse
build.prop galaxy j7109.
Wasn't able to upload them at once, so I have to upload them in three different posts.
androgeek2010 said:
build.prop galaxy j7109.
Wasn't able to upload them at once, so I have to upload them in three different posts.
Click to expand...
Click to collapse
I need the .img , not a binary.
---------- Post added at 08:21 PM ---------- Previous post was at 08:12 PM ----------
androgeek2010 said:
build.prop galaxy j7109.
Wasn't able to upload them at once, so I have to upload them in three different posts.
Click to expand...
Click to collapse
try "adb pull dev/block/bootdevice/by-name/boot.img"
minz1 said:
I need the .img , not a binary.
---------- Post added at 08:21 PM ---------- Previous post was at 08:12 PM ----------
try "adb pull dev/block/bootdevice/by-name/boot.img"
Click to expand...
Click to collapse
Here is the boot.img
I hope this will be the right one.
I need a official TWRP backup of system and boot for erdmin note 3 please help me!!!!
Ismael034202 said:
I need a official TWRP backup of system and boot for erdmin note 3 please help me!!!!
Click to expand...
Click to collapse
what is your problems?
I only need the TWRP backup
I think there is no twrp backup zip uploaded by someone...btw system & boot backup is a huge size for an upload
Please can you upload for me? Please
There's no point to share TWRP backup, It's useless for others. What's your problem btw? You Flash stock miui rom by MiFlash (+Clean all option) for start!
Can you share via drobox?
Download this fastboot rom (Kenzo, 8.1.6.0 Global Stable) : http://update.miui.com/updates/v1/fullromdownload.php?d=kenzo_global&b=F&r=global&n=
And flash it, Use this guide: http://en.miui.com/thread-235865-1-1.html
Hii Guys..
I need the custom TWRP recovery for my LYF water F1S (LS -5201), so that i can root it and install custom ROMs. Developers i request you to do the needful please.
Regards
My phone also f1s.
Did you had any rom-package or recovery.img?
onkarrathee said:
Hii Guys..
I need the custom TWRP recovery for my LYF water F1S (LS -5201), so that i can root it and install custom ROMs. Developers i request you to do the needful please.
Regards
Click to expand...
Click to collapse
Try using this guide
https://forum.xda-developers.com/android/software/guide-how-to-compile-twrp-source-step-t3404024
Guys...i have found a page for the stock rom for LYF water F1s Ls-5201. You can download it from here
I also extracted the stock recovery image from device and here is the link https://drive.google.com/file/d/0BwMCGOjWJuaxY0NSemJ6ZzdNU1U/view?usp=sharing
Also tried the method to make TWRP for LYF water F1_ LS5201 by @suraj-b method.... but not successful yet. For the process i've used twrp recovery of Le 2 x526.
i'm not a developer but it would be my pleasure if whatever i tried, help somebody.
Don't forget to "Hit THANKS..."
onkarrathee said:
Guys...i have found a page for the stock rom for LYF water F1s Ls-5201. You can download them from there http://www.needrom.com/download/lyf-ls-5201/#
I also extracted the stock recovery image from device and here is the link https://drive.google.com/file/d/0BwMCGOjWJuaxY0NSemJ6ZzdNU1U/view?usp=sharing
Also tried the method to make TWRP for LYF water F1_ LS5201 by @suraj-b method.... but not successful yet. For the process i've used stock recovery of Le 2 x526.
i'm not a developer but i would be my pleasure if whatever i tried, help somebody.
Don't forget to "Hit THANKS..."
Click to expand...
Click to collapse
Good job !
How to flash stock firmware to LYF water F1s Ls-5201
Prepare your system-----
1) Install the Qualcomm usb drivers on your system. Download link
2) Check your PC device manager, your phone should be detected in "Qualcomm HS-USB QDloader 9008" mode. It must detect to start the process.
3) Download the stock firmware from here . The software version downloaded with this link is "LS-5201-S10A_LYF_L13EN_200_170124_09-55-13".
4) Extract the downloaded firmware zip to an folder and rename the "IMAGES_FOR_QMSCT" to "firmware".
5) Download & install the QPST tool. Google it you can find it easily.
6) power off your phone & Make sure your device is charged to at least 50%.
7) Run the installed QFIL from installed programmes. Browse in programmer path to the "prog_emmc_firehose_8976_ddr.mbn" file in the folder where firmware is extracted. It will load the firmware & buid will be selected automatically.
8) Click on load xml and select the "rawprogram_unsparse_without_qcn.xml" if you havn't the backup of NV partition of your device.
If you have the backup NV partition of your device than you can select "rawprogram_unsparse.xml" because this will erase your RF Calibration data, IMEI and WiFi/Bluetooth Address etc. and you will have to restore the NV partition after installing the ROM.
I would suggest you to select "rawprogram_unsparse_without_qcn.xml" & keep it simple.
9) Choose the "patch0.xml" after that.
10) Hold the vol+ & vol- key together and plug usb cable to phone to enter into download mode. As you plug in the QPST tool would recognise your device in QDLoader 9008 mode with com port no. and download button will get activated.
11) Click the download button and sit back, it will take some time.
12) "finish dowload" appear, when process got completed and phone will reboot automatically.
13) Disconnect the device from PC one "android screen" appears (usually it takes 5 min. to appear LYF logo screen from android boot screen)
14) If doesn't reboots, there is some problem & get ready for real hard work .
You might have bricked. In this case just press the power button so than it can power ON. If android screen appears you are lucky enough
-----If android screen remains more than 6-8 minute, you are in bootloop. (It useually takes 5 min for LYF logo to appear after android logo)
-----To switch off your device in case of bootloop, press vol+, vol- & power key together for some time. It will switch off.
-----try to flash the firmware again by above process.
I have tested this method on my device and successfully flashed the stock firmware.
Don't forget to "HIT thanks"...!!!
Credit:
@[email protected] for providing the stock firmware
Me: for testing the procedure
Le2 not support MicroSd.
I will try use recovery of oppo R9plus.
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/open?id=0BwVjewgp3fvLbmtxZ21fSUZhOW8
Or download full package with flash tools and supersu.zip [URL="https://drive.google.com/open?id=0BwVjewgp3fvLUnRHS3NGRjlIRTQ]TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar[/URL]
TWRP recovery LYF_LS-5201
Guys... here is the unofficial twrp recovery for LS-5201. Download it here .
Let me know that you suceed..
This is twrp_unofficial_3.1.0.0 ported from Leeco Le2's TWRP recovery using @suraj-b method and if anythong goes wrong on your device download the stock recovery from the thread and flash it from bootloader.
Try on your own risk..!! :fingers-crossed:
Don't forget to HIT "Thnanks" down there
Please share the adb & fastboot files you used for unloacking bootloader and flashing recovery for the noobs. It would help.
keep it up. :good:
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
How to flash it bro...plzzz give us step by step help
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
If i flash it via fastboot...den can i root it through twrp...
prashant.palange said:
How to flash it bro...plzzz give us step by step help
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
If i flash it via fastboot...den can i root it through twrp...
Click to expand...
Click to collapse
You can download full package and use "OneKeyFlash(LYF-f1s).bat" to flash easier TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar
zjsss said:
You can download full package and use "OneKeyFlash(LYF-f1s).bat" to flash easier TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar
Click to expand...
Click to collapse
Bro but is it proper twrp for f1s...hv u try it
prashant.palange said:
Bro but is it proper twrp for f1s...hv u try it
Click to expand...
Click to collapse
It works well on my phone.
zjsss said:
It works well on my phone.
Click to expand...
Click to collapse
Thnk u soo much to bring us such wonderfull recovery....but bro...i found 2 issue....1 internal storage is showing empty 0mb and 2 der is no option for root like supersu.zip..plzz help me for dat...m i done wrong anything..plzzz help thank u sooo much brother...it doesn't mount internal storage..i tried mound system and data....but data doesn't mount...plzz help..hope u will understand
prashant.palange said:
Thnk u soo much to bring us such wonderfull recovery....but bro...i found 2 issue....1 internal storage is showing empty 0mb and 2 der is no option for root like supersu.zip..plzz help me for dat...m i done wrong anything..plzzz help thank u sooo much brother...it doesn't mount internal storage..i tried mound system and data....but data doesn't mount...plzz help..hope u will understand
Click to expand...
Click to collapse
It's my bad. This img had bugs.I well try to fix it.
You can copy supersu.zip to MircoSD and install it in TWRP rigtht now.
I checked by adb shell root is success.
Very sorry about that.
zjsss said:
It's my bad. This img had bugs.I well try to fix it.
You can copy supersu.zip to MircoSD and install it in TWRP rigtht now.
I checked by adb shell root is success.
Very sorry about that.
Click to expand...
Click to collapse
U r simply genius brother..root works properly.....god bless u ..love u ....:laugh::good:
Just try to make bugless twrp....thnk u in advance....
prashant.palange said:
U r simply genius brother..root works properly.....god bless u ..love u ....:laugh::good:
Just try to make bugless twrp....thnk u in advance....
Click to expand...
Click to collapse
Thx,i found this not a bug.
/data was locked by system.
Into twrp and keep /system read only,
And wipe /data will be ok .
but it will lost all your data in the phone!!!
So backup everything before you do it.
and install supersu .zip again to root.
zjsss said:
Thx,i found this not a bug.
/data was locked by system.
Into twrp and keep /system read only,
And wipe /data will be ok .
but it will lost all your data in the phone!!!
So backup everything before you do it.
and install supersu .zip again to root.
Click to expand...
Click to collapse
So what should i wipe...dalvik, cache, and data dats it..okay....not system...m i right? But data is not mounting den how can i wipe it?
prashant.palange said:
So what should i wipe...dalvik, cache, and data dats it..okay....not system...m i right? But data is not mounting den how can i wipe it?
Click to expand...
Click to collapse
It doesn't matter of wipe /date or wipe 3.
I guess because the phone kernel was rooted.TWRP had right of wipe.
But not so sure that.