Just got the Amazfit Stratos and I tried pairing it with my Jaybird X3 headphones but it doesn't show in the bluetooth screen. My headphones pair fine with my android phone. Is this a compatibility issue with the headphones?
Search for the device from the music App.
And make sure that the headphones are in discoverable mode (faster or colorful(red/blue) blinking of the led indicator)
s-u-f-f-e-r said:
Search for the device from the music App.
And make sure that the headphones are in discoverable mode (faster or colorful(red/blue) blinking of the led indicator)
Click to expand...
Click to collapse
Thanks! I just needed to set my Jaybirds to pairing mode just like you said and now it works. Cheers!
Related
Hi.
When I connect to the car bluetooth, music automatically starts, of course even if I did not listen music for days. I am using default Walkman.
How to turn it off?
cedropol said:
Hi.
When I connect to the car bluetooth, music automatically starts, of course even if I did not listen music for days. I am using default Walkman.
How to turn it off?
Click to expand...
Click to collapse
Check smart connect otherwise not sure, I'll check next time I go out in my car too.
TheOnlyIntruder said:
Check smart connect otherwise not sure, I'll check next time I go out in my car too.
Click to expand...
Click to collapse
If I uncheck "connect with multimedia function" in options of Car BT (only telephone function active) problem dissapear. But for me it is no solution.
I prefer possibility playing music but only with manual start, and without switch deep functions.
In Xperia Z it was possible but I forgot how.
cedropol said:
If I uncheck "connect with multimedia function" in options of Car BT (only telephone function active) problem dissapear. But for me it is no solution.
I prefer possibility playing music but only with manual start, and without switch deep functions.
In Xperia Z it was possible but I forgot how.
Click to expand...
Click to collapse
No I mean if you check smart connect, it may be auto playing the music because of "event occuring bluetooth connected", don't uncheck multimedia audio in the bluetooth settings otherwise you wont get audio from your phone when playing music or videos etc,
I've got my phone connected to my pc via bluetooth right now and it isn't autoplaying music when I disconnect/reconnect bluetooth (I've been toying around with it) and it seems it'll only autoplay music if I set up the smart connect event.
Please explain where I can find this option?
For now in SmartConnect in Events tab I have four events, all are OFF.
In first tab I have BT headset, charger etc and of course Car BT but inside there are the same options as for ex BT mono headphone.
cedropol said:
Please explain where I can find this option?
For now in SmartConnect in Events tab I have four events, all are OFF.
In first tab I have BT headset, charger etc and of course Car BT but inside there are the same options as for ex BT mono headphone.
Click to expand...
Click to collapse
Hmm, if all the events are turned off then I'm not sure, could it be your car stereo requesting the music to be played immediately on connection?
I checked it out and I did not find any such options, this is rather standard (basic) BT device.
Right I've just been to my car to check if my Z2 plays automatically when it connects to my car's bluetooth and it doesn't, I have to press play on my car stereo or the walkman app for music to play.
I have to ask though, with your original Xperia Z, what version of Android is it running? I ask this because it's only been since Android 4.3 that bluetooth audio and associated protocols have been fully put to use (excluding any 3rd party bluetooth stacks). My One X is on android 4.1 and only responds to previous and forward from the car stereo the same was true with my HTC Desire on Android 2.3. Z2 on 4.4.2 responds to all the controls and also sends song information to the car stereo, the car stereo is a fairly old JVC KD-BT11.
I think it's more likely that your car stereo is trying to play music automatically when it connects and may have tried to do it with the Z (if the Z wasn't on 4.3). This is all just mostly guesswork, otherwise I have no idea why it's happening.
Hmm.. I have update Xperia Z to 4.3 but as I remeber problem was solved on 4.2.2 or earlier.
Thank you for assistance, tomorrow I will inspect car BT options again and I will back here.
Is it possible that Throw function can make a mess?
When I swith ON Bluetooth (even away of car) I see for a while icon of Throw function... and when I connect to car BT I see it again. When I connect mono BT headphone this icon don't show up...
I've check options in car BT - there is option "auto-play BT" but it is OFF all the time...and music starts automatically.
For me Throw function is mostly suspected...
Recently I purchased Spice M-9010.
I paired it to my Asus Zenfone 6 and installed BT Notirfier app also.
Now I can view notifications in M-9010.
But, It is paired as a bluetooth audio device.
So, I am unable to pair bluetooth headset to my Zenfone.
Then I tried to pair bluetooth headset to M-9010.
That is also seems not possible.
Now the options before me are
If I want notifications in M-9010, I have to use it's speaker and mic.
or use a wired headset.
Actually, I purchased it to overcome the difficulty of handling 6" device for calls.
Now, that became impossible.
Please, guide me to overcome this issue.
I think, if I can pair M-9010 with some other profile than audio, it might be possible.
how to daydream it.
kadal27 said:
Recently I purchased Spice M-9010.
I paired it to my Asus Zenfone 6 and installed BT Notirfier app also.
Now I can view notifications in M-9010.
But, It is paired as a bluetooth audio device.
So, I am unable to pair bluetooth headset to my Zenfone.
Then I tried to pair bluetooth headset to M-9010.
That is also seems not possible.
Now the options before me are
If I want notifications in M-9010, I have to use it's speaker and mic.
or use a wired headset.
Actually, I purchased it to overcome the difficulty of handling 6" device for calls.
Now, that became impossible.
Please, guide me to overcome this issue.
I think, if I can pair M-9010 with some other profile than audio, it might be possible.
Click to expand...
Click to collapse
like how can set it like it should only show time.
kadal27 said:
Recently I purchased Spice M-9010.
I paired it to my Asus Zenfone 6 and installed BT Notirfier app also.
Now I can view notifications in M-9010.
But, It is paired as a bluetooth audio device.
So, I am unable to pair bluetooth headset to my Zenfone.
Then I tried to pair bluetooth headset to M-9010.
That is also seems not possible.
Now the options before me are
If I want notifications in M-9010, I have to use it's speaker and mic.
or use a wired headset.
Actually, I purchased it to overcome the difficulty of handling 6" device for calls.
Now, that became impossible.
Please, guide me to overcome this issue.
I think, if I can pair M-9010 with some other profile than audio, it might be possible.
Click to expand...
Click to collapse
Paired your smartwatch
Then you will see option button next to your paired smartwatch
Click on it
Now you will see there is option like use for
Phone audio
Media audio
Just turn off the phone audio option
Now you can connect any Bluetooth handset.
And also this trick can be used with other device also.
My phone currently automatically connects to my car's audio Bluetooth. What happens if I pair my Zenwatch2 to my phone and then get into my car? Which one gets any audio (calls, music etc) or would they both get it?
glenn4466 said:
My phone currently automatically connects to my car's audio Bluetooth. What happens if I pair my Zenwatch2 to my phone and then get into my car? Which one gets any audio (calls, music etc) or would they both get it?
Click to expand...
Click to collapse
I use mine with my sound bar and with a small portable Bluetooth speaker and when I turn them on, it defaults to sending music to the speakers. I would imagine that it would do the same in the car.
It worked for me for a long time and now I changed my phone with the newest android software but it will not work anymoore. The watch and the phone are ringing but when I`m answering the call via watch the phone speaker starts ----
Where do I have to change it - zenwtachmmnager or ?
Thanks
On the watch, go to settings, then Bluetooth, click on the "play phone audio on watch"
neederishelp said:
On the watch, go to settings, then Bluetooth, click on the "play phone audio on watch"
Click to expand...
Click to collapse
when i go to settings i dont see a bluetooth option listed.
It's right under WiFi, see the picture.
If you connect in the car and have multiple Bluetooth headsets, auto Bluetooth connect from the play store is a godsend to help prioritize connections. I can now turn on headsets and connect to the car and the phone will route accordingly. Before the ZenWatch didn't want to give it up so all call audio would go to the watch
Sent from my Nexus 6P using Tapatalk
Hi, I have had the problem that i was unable to resume my music during a workout when my bt headphones got into standby (and the music paused). I have tried several button combinations such as double tap, hold for a few seconds, single tap, etc, where as nothing really worked.
did i mess out something??
Are your headphones stereo, with support to AVCTP? When I tested my Pace with a mono headphone it didn't work for music control, as it doesn't support AVCTP, but my stereo headphones worked well. I am not sure if it works if the headphones disconnect during an activity (I've never seen one going in standby mode, mine are either on or off), but if you don't hear the connected sound after it goes on again, then it won't work.
lfom said:
Are your headphones stereo, with support to AVCTP? When I tested my Pace with a mono headphone it didn't work for music control, as it doesn't support AVCTP, but my stereo headphones worked well. I am not sure if it works if the headphones disconnect during an activity (I've never seen one going in standby mode, mine are either on or off), but if you don't hear the connected sound after it goes on again, then it won't work.
Click to expand...
Click to collapse
stereo phones, i guess they were connected again, but i can't say for certain