Related
So I bought the pace model.
Did an interval workout on the treadmill, after I checked the app it measured 195 heartbeats/second. Which was nice and well becase i know thats where I end up at the end of those 4 minutes.
However, after that I did some strength training, and then finished off with some uphill walk on the treadmill where the treadmill measued 150 BPS, and my watch... 88 BPS. I know 150 is more accurate because my breath was around there.
After that, it hasnt been able to register anything over 110 BPS. Tried it for several workout sessions, still doesnt measure above 110. I tried factory reset.. doesnt change anything.
Someone else seen this?
I'm testing one amazfit and comparing with one garmin 630.
Amazfit measures correct just after 10 minutes of workout and then, after some minutes it measures wrong about a minute or two, and back to measure correct again.
Very bad algorithm.
Has nothing to do with bad algorithm.
Why do you guys think that there is no gym workout on the watch?
Because there is no known wrist hr sensor that is working correct for that.
Doing workouts means bending and flexing the wrist, which means that the sensor looses contact, which means inaccuracy .
And 90% of people that complain, have the sensor on a spot that is not really working.
Have seen very hairy guys complaining or people that have the watch "between the hand and the bone".
And make sure it is tight.
jhenrikb said:
I checked the app it measured 195 heartbeats/second.
Click to expand...
Click to collapse
Holy crap, 195 beats PER SECOND!!?!! How are you still alive? Are you The Flash? Or possibly some kind of super smart hummingbird with an xda account (that would be cool).
Jokes aside, I also find the HRM on the Pace problematic.
It seems to work ok when you do "check now" as long as you stay still and its on tight. But whenever I use continuous HRM or do an activity like biking the reading seems to be about 20+ bps too high.
For example, I did "check now" just before a bike ride and got 65bpm, then again right after the ride and got 104bpm, but the bike activity recorded a starting heart rate of 84bpm and an ending rate of 134bpm.
yeah, sometimes my watch seems to measure my heart rate correctly, but other times it shows quite strange results.
I just finished indoor cycling workout. I used together Suunto Ambit watch with HR strap and Amazfit Pace. Amazfit HR data is useless. Here is merged image with both graphs.
Amazfit was tight, and my hand didn't moved to much. I tried several times to move hand on different positions to check is there any improvement, but without change.
Here is paralel graph (top is Suunto, bottom is Amazfit)
sometimes when physical exertion increases (when I go up a slope, for example) the heart beats are reduced.
The HR sensor in the pace seems about as accurate as someone guessing your heart rate from across the room.
Yes the bip is the same.
Absolute ****.
I've compared it with Polar watch + chest strap. There were differencies in the meassured pulse, however the average pulse for the trainings was very close on both devices. What is important for Peace, it has to be fastened very tightly on the wrist.
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
I have compared Amazit Pace (1.3.6d) with Garmin Chest Strap HR monitor and FR235 doing Interval training running, and to FR235 optical HR monitior doing indoor biking.
In both activities Amazit Pace worked inestable the first 10 min then worked showing nearly same HR thank Strap HR and optical HR monitors.
Amazfit Pace showed a sudden decrease in HR reading about the middle of activities (about 1 hour each) and then back to proper reading.
In summary, Amazfit Pace uses about 10 min to have proper HR values, and sometimes during the activity has sudden decreases in HR reading.
For the rest of activity it performs quite well.
but you know that you can pair amazfit with a heart rate monitor strap, for example Polar H7?
This is about the Pace, and that can't be paired with a strap.
fzelle said:
This is about the Pace, and that can't be paired with a strap.
Click to expand...
Click to collapse
oh, ok, i was talking about Stratos
heart rate sensor go crazy
I have the pace model too
sometimes (recently with more frequency) the heart rate sensor go crazy
yesterday, when i did an Indoor Run, he show the alert: "heart rate too low: 75", seconds after this, he show: "heart rate too high: 185", seconds after: "heart rate too low: 81", "heart rate too high: 172", etc etc.
Someone else seen this?
Someone know how to fix it?
ahander said:
I have the pace model too
sometimes (recently with more frequency) the heart rate sensor go crazy
yesterday, when i did an Indoor Run, he show the alert: "heart rate too low: 75", seconds after this, he show: "heart rate too high: 185", seconds after: "heart rate too low: 81", "heart rate too high: 172", etc etc.
Someone else seen this?
Someone know how to fix it?
Click to expand...
Click to collapse
Is the watch brand new? Do you sweat a lot? Check the cover of the HR sensor, some people that had used the watch while bathing/showering had problem with the cover getting loose.
lfom said:
Is the watch brand new? Do you sweat a lot? Check the cover of the HR sensor, some people that had used the watch while bathing/showering had problem with the cover getting loose.
Click to expand...
Click to collapse
I bought my pace in Feb/18 (3 months ago)
my sweat is near to zero
never bath/shower using it
the pace work well until one week ago, when i need to do a factory reset because something was draining the battery too fast (one charge in one night)
after the reset, the battery issue has gone, and the watch work well until yesterday (when the HR sensor issue start)
thinking about do one more factory reset... :fingers-crossed:
just to illustrate: HR (red) x Cadence (blue)
alexhan said:
I have the pace model too
sometimes (recently with more frequency) the heart rate sensor go crazy
Someone know how to fix it?
Click to expand...
Click to collapse
Same issue here, with every Rom update HR accuracy gets worse in Sports activities. Continuous HR monitor seems accurate when compared to my chest strap, but goes haywire and at least 50% off true when in Run Indoor and Cycle indoor. Elliptical seems to be accurate at least some of the time. Have factory reset many times but nothing seems to help.
Yesterday I realized that with new ROM update, Peace have option to connect to other Bluetooth sensor(s).
I tested it and it with cheap 20$ Bluetooth sensor and works nice.
So I was thinking about getting the watch, but I saw this
https://www.neowin.net/news/review-...t-needs-to-hit-the-gym-for-some-massive-gains
It says basically the watch is not good for fitness as it doesn't sync data with apps like goofle fit or so. It says you can't even show your data on phone or similar.
Only sync with strava, but not all data
Has it changed since one year ago? Would you recommend the watch for someone who will use it almost exclusively to fitness? (Count calories, count gym series, runnings....). And obviously want to see it in the phone synchronised
I would also use it for google assistant, google keep, maps....but I haven't found about that...so thinking the watch it's quite useless because of software
Enviado desde mi ONEPLUS A5000 mediante Tapatalk
Javi22 said:
So I was thinking about getting the watch, but I saw this
https://www.neowin.net/news/review-...t-needs-to-hit-the-gym-for-some-massive-gains
It says basically the watch is not good for fitness as it doesn't sync data with apps like goofle fit or so. It says you can't even show your data on phone or similar.
Only sync with strava, but not all data
Has it changed since one year ago? Would you recommend the watch for someone who will use it almost exclusively to fitness? (Count calories, count gym series, runnings....). And obviously want to see it in the phone synchronised
I would also use it for google assistant, google keep, maps....but I haven't found about that...so thinking the watch it's quite useless because of software
Enviado desde mi ONEPLUS A5000 mediante Tapatalk
Click to expand...
Click to collapse
I'll have a go answering your question
The Amazfit app has improved since last year, you can see data within the app e.g. step count, sleep quality (for what it's worth), heart rate etc... But that data is tied to the app since there is no web portal that you can access say on a PC.
The sync still remains with Strava only, I found that if you install the MiFit app from the Google Play Store you can sync the watch to that which can then export the data to Google Fit. Though I didn't really find the data in Google Fit to be all that great / useful for it to be worth my while having 3 different apps installed.
Another limitation I've found with the watch is that calorie count is not all day calories. It is some very odd "active" calorie count figure. That is to say, if you wear the watch and sit down all day doing nothing you will not see the calorie count figure increase as Fitbits or Garmin devices since Amazfit have not considered BMR in their calorie counting whatsoever.
If you start an activity or you walk all day your calorie count will increase. I guess you could treat the calorie figure as active calories...personally I was annoyed with it at first but realistically I don't count calorie intake, so why would I worry about calorie expenditure? I just use a watch face that doesn't show calories and forget about the usefulness of that metric.
My use case for the watch is primarily fitness based, always on screen and notifications. I'm happy with the always on screen and notifications. Fitness and general health leaves a lot to be desired though. In my experience the things I've noticed include:
* Sleep tracking is not great, it gets the times correct most nights, but I'm pretty much exclusively in light sleep mode. Maybe the watch is too sensitive or I trash around in my sleep, I don't know. I hardly look at this outside of seeing how many hours sleep I got.
* Calorie count not worth the hassle due to the above
* HR tracking is...well, I'm still not sure. Resting HR can have me a 50 bpm one minute, the next I'm at 90+ bpm while sitting at my desk. Other times it can go hours nailing a pretty good representation of HR as I'd expect. During exercise, don't expect weight training to be anywhere near accurate (this is true for most optical HR sensors), running workouts do have drops where I could be at 150 or 160bpm one second then <120bpm the next but the trend seems to be correct most times.
* GPS might not be as accurate as some other running watching, but does exactly what I want. I've not noticed any major drift or drop outs in GPS, just make sure to wait for the GPS lock before starting your activity.
With all that said it might sound like I dont like the watch. But I think even with these issues I'd buy it again. Mainly because it was cheap (compared to rival products), offers most day to day benefits i wanted (notifications, always on display, several days battery life), it also has GPS and exports to the exercise tool I use.
To try and make the fitness aspect a bit more appealing for me what I've started doing is running with a second hand vivofit 3 in my pocket reading HR from a strap and use the Amazfit for GPS. When I get home I've written a script to replace the Amazfit HR with the Garmin HR and upload that to Strava. Works well, allows me to keep Cadence, GPS info and get a more accurate HR reading. I could use this setup for weight training as well, but realistically I'll never be HR zone training during a weight workout so as long as the Amazfit can upload workout time to Strava I don't care about that data.
Hello, i own an amazfit bip since afew weeks, and i am disappointed by the GPS accuracy. I can see drifts on my way, and the total distance is always wrong.
I am running in a city, so i beg it is a part of the reason.
Having a look at the GPS files, it seems that the watch only records the position once every 20 seconds. The frequency is really poor, is it normal? The GPS cannot be accurate knowing that...
Thanks
Hmmm, this doesn't seem normal. Pace records every 1-2s, and also records the accuracy in the internal database when doing it. The compass works fine on watch? Maybe someone else with a BIP can give more info...
I also have a BIP and the distance is totally wrong.
Actually the distance by step counter is more accurate than BIP GPS.
Also it seems to increase distance while standing still.
roughly 100 meters every 5 minutes.
And all that with perfectly clear sky.
I have a bip and I think it's accurate. I did compare with my arrival SQ-100 and no difference at all. In middle of city doing 20km and at the end the diference was only 10-50 meters.
latenhas said:
I have a bip and I think it's accurate. I did compare with my arrival SQ-100 and no difference at all. In middle of city doing 20km and at the end the diference was only 10-50 meters.
Click to expand...
Click to collapse
When did you buy yours?
I bought mine 1 week ago and have the last FW: v.1.1.2.05
has anyone tried swimming with the Amazfit Stratos 3?
any feedback on the Strokes count? plus other features
my Stratos 2 gives me a low stroke count of 25 strokes for 50m in 1mins plus a single random spike in the data recorded of 58 strokes for one lap in every one of my 1km swims for 20 laps
hopefully, it is solved in the new watch, otherwise will just continue using the Stratos 2 haha.
currently using the pause button for laps and resume to continue after a 30sec pause for each 50m lap.
I am also curious how the new startos 3 handle with swimming. I have Suunto Spartan Sport baro, and it works perfect when swimming, it only has weak vibrations
it's the same as on STRATOS 2, a pity no progress
Kt2019 said:
has anyone tried swimming with the Amazfit Stratos 3?
any feedback on the Strokes count? plus other features
my Stratos 2 gives me a low stroke count of 25 strokes for 50m in 1mins plus a single random spike in the data recorded of 58 strokes for one lap in every one of my 1km swims for 20 laps
hopefully, it is solved in the new watch, otherwise will just continue using the Stratos 2 haha.
currently using the pause button for laps and resume to continue after a 30sec pause for each 50m lap.
Click to expand...
Click to collapse
it's the same as on STRATOS 2, a pity no progress
my 1st swim with stratos 3: In a 25m pool I swam all the time alternating freestyle, backstroke, breaststroke every lap in different swim type and I didn't stop. The distance is not good, I swam about 200-300 m more. The Stroke rate chart contains 0 values, which I think is wrong because I didn't stop. On the stroke rate chart the name of Y axis is wrong instead of BPM should be SPM. The title of the chart is Chinese, the name of the current stroke rate is also Chinese. On the pace chart the overlay data menu is also Chinese.
my 2nd swim: I expreienced the same, stratos 3 counted less laps as I really swam. E.g. after 4 laps it showses 3 laps.
I have bad experience, so inaccurate that it cannot be used.
EkkerT said:
my 1st swim with stratos 3: In a 25m pool I swam all the time alternating freestyle, backstroke, breaststroke every lap in different swim type and I didn't stop. The distance is not good, I swam about 200-300 m more. The Stroke rate chart contains 0 values, which I think is wrong because I didn't stop. On the stroke rate chart the name of Y axis is wrong instead of BPM should be SPM. The title of the chart is Chinese, the name of the current stroke rate is also Chinese. On the pace chart the overlay data menu is also Chinese.
my 2nd swim: I expreienced the same, stratos 3 counted less laps as I really swam. E.g. after 4 laps it showses 3 laps.
I have bad experience, so inaccurate that it cannot be used.
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------------------------------------------------------------
It was my failor, becouse I weared the watch on the other wrist as it was configured. The initial setup was made by my son, he configured it to wearing on right wrist. During the test written in my previous post I weared the watch on my left wrist. I tested it on my right wrist, in that case the watch was accurate, it counts the laps exactly.
swim menu
could you post a screen shot of the pool swim menu?
is there any option for connection of an external heart rate monitor, chest strap or polar OH1+ etc.
stratos 2 does not allow connection of heart rate accessories.
apparently Bluetooth signals don't travel well in water.
I think the stratos is very accurate when it comes to poolswimming, open water is a total mess!
Hello,
I can confirm that the GPS for outdoor swimming is a complete mess, however data HR/Strokes/distances, look ok apparently...
Surprisingly, GPS for "Paddles" outdoor activity on a lake worked fine either with GPS map it looks "almost" ok and not getting "crazy" like in swimming activity.
Other classic outdoor activities works fine, walk, run, cycling etc...
I'm using Startos3 with Everest2-4.0.20 custom ROM from Saratoga79 (my saver ) because 4.2.6.0 was a total mess on my side...
Tzar92 said:
Hello,
I can confirm that the GPS for outdoor swimming is a complete mess, however data HR/Strokes/distances, look ok apparently...
Surprisingly, GPS for "Paddles" outdoor activity on a lake worked fine either with GPS map it looks "almost" ok and not getting "crazy" like in swimming activity.
Other classic outdoor activities works fine, walk, run, cycling etc...
I'm using Startos3 with Everest2-4.0.20 custom ROM from Saratoga79 (my saver ) because 4.2.6.0 was a total mess on my side...
Click to expand...
Click to collapse
4.2.6.0. is what I am ussing at the moment.
I think there are a few bugs in this ROM, hope they fix it asap.
With the last 2 swimsessions in 50m pool, Stratos 3 recorded perfect but the sync with Strava there was no distance in the upload, only the time recorded.
Hi, I'm using 4.2.8 and swimming is not accurate... When I swim 1000m the watch counts more than 1300m... Is there any way to make it measure HR? And EPOC? I usually jog and cycle but now I am swimming and my EPOC goes to zero...
Does the 4.2.5 measure the swimming better?
Is there a way to roll back to 4.2.5?
Mondrulho said:
Hi, I'm using 4.2.8 and swimming is not accurate... When I swim 1000m the watch counts more than 1300m... Is there any way to make it measure HR? And EPOC? I usually jog and cycle but now I am swimming and my EPOC goes to zero...
Does the 4.2.5 measure the swimming better?
Is there a way to roll back to 4.2.5?
Click to expand...
Click to collapse
True, altough the poolswimming is accurate, it doesn't measure heartrate and doesn't calculate with epoc.
This watch gives it the feel that it wasn't finished when it arrives in the stores.
There is a lot work for the developers of amazfit, to solve al the bugs and shortcomings.
Doens't matter if it has 80 sports if doens't work... when it counts bad the distance, all the values are wrong...
Mine is already on sale... I'm going to buy a Garmin Fenix.
Mondrulho said:
Doens't matter if it has 80 sports if doens't work... when it counts bad the distance, all the values are wrong...
Mine is already on sale... I'm going to buy a Garmin Fenix.
Click to expand...
Click to collapse
I understand, i mainly use this watch for running and swimming wich it does a accurate job.
EPOC is not a big issue for me altough i like to see that function working fine too.
My next watch wouldn't defenitely be an amazfit again.
SOLD IT. Never wanna see it again. Tired of problems and bugs... Bought a Garmin Fenix 5X Saphire. Until now it is perrrrrfect. When i swim it count the distance just perfect, notification perfect, gps tracking wonderfull. Battery is very good to and the screen is allways on as in the stratus.
And more: i can connect a lot of external sensores like HRM to swim, cadence sensor...
i have difficulty with my swimming data. the stratos 3 capture my swimming stroke and provide chart but when it sync with Zepp apps, no swimming stroke chart. i try to reset my zepp app, login back and sync with stratos 3, still do not have the swimming stroke chart.
i even try reset factory at my stratos 3 and did another swimming session buit still the same. can anyone suggest what to do next. my stratos 3 was in 4.2.8.0 version
I am currently on day 8 since last full charge.
AOD off.
Lift wrist to display off.
Total 5 days' gym workout comprises 43 sessions (with total 614 mins/5864 calories/60km run & walk).
Watch faces synced at least 30~40 times.
HR at 1-minute interval. Sleep assistant only enabled after day 5.
My GTR-2e is currently showing 54%. By calculation, I would expect it to last 17 days per single charge. It is much better than I earlier expected. Amazfit has not exaggerated on its claim that the watch can last for 24 days on typical use.
Hi, I wanted to ask if you know as I'm interested also to get it but searching online i couldn't find anything.
Does the GTR2e has rowing workout ?
I saw that it received an updated that increased the total supported workouts to 90 but i can't find anywhere a list with the supported workouts.
Thanks
I just checked. There is no rowing workout. My watch is updated.
Both indoor or outdoor rowing not available.
You can see also this post:
https://www.reddit.com/r/amazfit/comments/ljciuz
oh, thats a bummer.
Thank you for checking it.
Can you confirm that GTR2e can show AOD if lift to wake is active?