Related
Hi,
I have made a failed attempt to REBRAND my Honor 9 ROM from Chinese to EU one. After trying to restore my phone from TWRP (also failed due to some unknown reason), I am finding my phone's bootloader locked.
I have the unlock code with me, however since USB debugging is not enabled i run into the following error:
FAILED (remote: Command not allowed)
finished. total time: 0.016s
Any ideas on getting USB Debugging enabled via fastboot or adb ? I can't get past Huawei eRecovery.
Thanks
Rommco05 said:
Fastboot recognize phone?
Click to expand...
Click to collapse
Yes. When I type the command fastboot devices it shows me the serial number of the phone.
Rommco05 said:
So this problem has nothing with usb debbuging. Have your phone FRP? If yes is locked or unlocked?
Click to expand...
Click to collapse
The message at the fastboot screen is
PHONE Locked
FRP Locked
Rommco05 said:
So this problem has nothing with usb debbuging. Have your phone FRP? If yes is locked or unlocked?
Click to expand...
Click to collapse
It is the Chinese model STF-AL10. It did not have FRP lock. However after trying to restore from your TWRP backup it started giving these messages.
Rommco05 said:
omg my twrp backup is for STF-L09, EU model not for STF-AL10! DC Phoenix is tool (payed) which can probably help you unlock phone and repair it
Click to expand...
Click to collapse
Ok. I was just waiting for that validation. Will try the Dc unlocker
Rommco05 said:
omg my twrp backup is for STF-L09, EU model not for STF-AL10! DC Phoenix is tool (payed) which can probably help you unlock phone and repair it
Click to expand...
Click to collapse
Will the update.app of B120 work with D C Unlocker for STF-AL10?
Rommco05 said:
Really don't know, maybe is better to use original firmware for your model. This tool maybe can rebrand phone too
Click to expand...
Click to collapse
Any links for the full firmware of STF-AL10?
The rebrand forum had 3 files in HWOTA folder. Can you help me identify which files to use?
Rommco05 said:
Your model is STF-AL10C00? U need all 3 files
Click to expand...
Click to collapse
Yes STF-AL10COO.
Will the rebrand files work? I have all three of them.
Rommco05 said:
Your model is STF-AL10C00? U need all 3 files
Click to expand...
Click to collapse
As your Chinese model tries to install original firmware through Erecovery it should work.
letterio said:
As your Chinese model tries to install original firmware through Erecovery it should work.
Click to expand...
Click to collapse
I am going nuts trying to figure this out. So now finally, I am going to use the DC unlocker to unlock and flash L09 rebrand files on my AL10
Wish me luck!
raw_jay said:
I am going nuts trying to figure this out. So now finally, I am going to use the DC unlocker to unlock and flash L09 rebrand files on my AL10
Wish me luck!
Click to expand...
Click to collapse
Okay how do you like good luck
Success!!!!
Rommco05 said:
I'm never rebrand phone so I don't know, but I think DC unlocker can rebrand phones
Click to expand...
Click to collapse
I have finally managed to unbrick my phone. Thank you all for your continuous guidance and support.
How did YouTube unbrick your Phone Raw_Jay, il have the same problem... Please help...
redhah said:
How did YouTube unbrick your Phone Raw_Jay, il have the same problem... Please help...
Click to expand...
Click to collapse
He used a paid software called DC Phoenix
PalakMi said:
He used a paid software called DC Phoenix
Click to expand...
Click to collapse
YEAH, I DID IT !!!! With dc Phoenix.... I was stuck with my P8 lite bricked. Fastboot OK but No way to unlock bootloader because of OEM usb debug off.... So i payed 15 crédits on dc Phoenix to flash my P8 during 72hours... I get stock firmware from their support zone (Prague l31_c432B164 germany Portugal switzerland france. APP) and i flashed it with dc Phoenix and BINGO!!!! My P8 lite came back to life after 3 weeks of hard reading, searching, flashing, working.... Thank you Palakmi....
You're welcome
Requesting DC Phoenix account
redhah said:
YEAH, I DID IT !!!! With dc Phoenix.... I was stuck with my P8 lite bricked. Fastboot OK but No way to unlock bootloader because of OEM usb debug off.... So i payed 15 crédits on dc Phoenix to flash my P8 during 72hours... I get stock firmware from their support zone (Prague l31_c432B164 germany Portugal switzerland france. APP) and i flashed it with dc Phoenix and BINGO!!!! My P8 lite came back to life after 3 weeks of hard reading, searching, flashing, working.... Thank you Palakmi....
Click to expand...
Click to collapse
Can i have your dc phoenix account for 1 time use plz.. I am kind of stuck in same situation and my country not support payments.
I shall be very thankful to you?
I dont have any crédits now. ...sorry
Hi all,
I am looking to pick up a Mate 10. The one that the seller has is L00 version so I suspect i'll need to flash it to L29 C636 for my use in Canada. I am new to flashing Huawei, was wondering if I HAVE to use FunkyHuawei or I can unlock the bootloader and use another method?
If I am not mistaken, Funky just lets you flash without unlocking bootloader, whereas the other method is free but will need to unlock bootloader. Am I correct?
Rebrand guide by mankindtw: https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
FunkyHuawei: https://forum.xda-developers.com/mate-10/how-to/root-updates-rebranding-unbricking-t3701970
Thanks in advance!
cy88 said:
Hi all,
I am looking to pick up a Mate 10. The one that the seller has is L00 version so I suspect i'll need to flash it to L29 C636 for my use in Canada. I am new to flashing Huawei, was wondering if I HAVE to use FunkyHuawei or I can unlock the bootloader and use another method?
If I am not mistaken, Funky just lets you flash without unlocking bootloader, whereas the other method is free but will need to unlock bootloader. Am I correct?
Rebrand guide by mankindtw: https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
FunkyHuawei: https://forum.xda-developers.com/mate-10/how-to/root-updates-rebranding-unbricking-t3701970
Thanks in advance!
Click to expand...
Click to collapse
Yes, with FunkyHuawei you don't need to unlock the bootloader, and can also be used to convert from mono-sim to dual sim.
For the free method, yes, you need to unlock the bootloader before rebranding.
Pretoriano80 said:
Yes, with FunkyHuawei you don't need to unlock the bootloader, and can also be used to convert from mono-sim to dual sim.
For the free method, yes, you need to unlock the bootloader before rebranding.
Click to expand...
Click to collapse
Needs to be rooted aswell for free method? If we pay funky for rebranding and dual, can we still get system updates or can we we update via Huawei Firmware Finder?
Sent from my BLA-L09 using Tapatalk
alixra said:
Needs to be rooted aswell for free method? If we pay funky for rebranding and dual, can we still get system updates or can we we update via Huawei Firmware Finder?
Sent from my BLA-L09 using Tapatalk
Click to expand...
Click to collapse
FH does nothing to stop you from getting OTA updates or from updating with Firmware Finder.
i unlocked the bootloader a few days ago, just to root the phone, but i was wondering whats the advantage on rebranding the phone? i have the mate 10 pro
mediavieja said:
i unlocked the bootloader a few days ago, just to root the phone, but i was wondering whats the advantage on rebranding the phone? i have the mate 10 pro
Click to expand...
Click to collapse
Wondering the same as well
cy88 said:
Hi all,
I am looking to pick up a Mate 10. The one that the seller has is L00 version so I suspect i'll need to flash it to L29 C636 for my use in Canada. I am new to flashing Huawei, was wondering if I HAVE to use FunkyHuawei or I can unlock the bootloader and use another method?
If I am not mistaken, Funky just lets you flash without unlocking bootloader, whereas the other method is free but will need to unlock bootloader. Am I correct?
Rebrand guide by mankindtw: https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
FunkyHuawei: https://forum.xda-developers.com/mate-10/how-to/root-updates-rebranding-unbricking-t3701970
Thanks in advance!
Click to expand...
Click to collapse
U can use the new tool from Dc Unlocker to Rebrand, its free.
Still a Beta version but u can test.
No need to unlock bootloader, TWRP or root!
Supports:
Mate 10
Mate 9 Pro
Mate 9
Mate 8
Mate 7
P10
P9
DC-Huawei Converter (beta)
https://forum.dc-unlocker.com/forum...cker-software/171236-dc-huawei-converter-beta
whta does re-brand gives me ?
Hi. As you can see the title of the thread, how do I unlock the bootloader and root my honor 7C? I tried the official bootloader unlock code but it doesn't work. Tried the 2nd imei but same code. If anyone could help me, I would really appreciate any help.
Wow!
Really?! Are you kidding me right now? How is it possible to root a phone with locked bootloader? Why did you even bother to answer if you didn't know anything about android? You just went on google, copy pasted this answer from some random site and called it a day. Wow!
Bootloader unlock
Hello same problem here, how to unlock the Honor 7C 's bootloader? Thank you in advance for your help
I have the same problem i cant unlock the bootloader. The code is direct from Honor customer service. I have try a lot of things, diffrent adb versions etc. Can some one help ?
lineage os for honor 7c
plz give me rom for honor 7c
At first you have to unlock the bootloader.
kadett 1 said:
At first you have to unlock the bootloader.
Click to expand...
Click to collapse
If you've read the title, I'm asking that how to do it. Already tried the code given by official huawei bootloader unlock site but it doesn't work.
arsalan731 said:
plz give me rom for honor 7c
Click to expand...
Click to collapse
Have you unlocked your bootloader?
arsalan731 said:
plz give me rom for honor 7c
Click to expand...
Click to collapse
UsamaNasir95 said:
If you've read the title, I'm asking that how to do it. Already tried the code given by official huawei bootloader unlock site but it doesn't work.
Click to expand...
Click to collapse
The answer is not for you.
It is for the guy ask for rom. I have the same problem. Code don't work.
kadett 1 said:
The answer is not for you.
It is for the guy ask for rom. I have the same problem. Code don't work.
Click to expand...
Click to collapse
Already said that you can't do anything like flashing roms or rooting without UNLOCKING THE BOOTLOADER.
Nothing new here?
Looks promising
Huawei Honor 7C Font Display
Can someone please help, i want to change Font size in my Huawei Honor 7c device. Please let me know how can i do it.
Do you guys use the manufacturing mode to unlock the phone
Unlock bootloader with DC-Unlocker (around 4 euro), flash TWRP made by Augustoandro, flash Supersu
inguna said:
Unlock bootloader with DC-Unlocker (around 4 euro), flash TWRP made by Augustoandro, flash Supersu
Click to expand...
Click to collapse
dc unlocker does nothing else as the original unlock code or am i wrong ? I have original code from honor but it dont work to unlock bootloader.
---------- Post added at 21:21 ---------- Previous post was at 21:19 ----------
sltushar said:
Do you guys use the manufacturing mode to unlock the phone[/QUOTE
Please exlplaine more what you mean ...?
Click to expand...
Click to collapse
kadett 1 said:
dc unlocker does nothing else as the original unlock code or am i wrong ? I have original code from honor but it dont work to unlock bootloader.
Click to expand...
Click to collapse
My bad, guys over 4PDA forum unlocked it using HCU Client not DC-Unlocker
IMPORTANT: Before proceeding, enable "manufacturer mode" on your phone. This is done by entering in dial pad code *#*#2846579#*#* select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode". Then connect it to PC and Hisuite for drivers.
TWRP 3.2.1 for Honor 7C LND-L29 (any Honor 7C with 5.99'' screen size)
Compiled from sources by nemo-nemo from 4PDA forum
command: fastboot flash recovery_ramdisk twrp_lnd_l29.img
Twrp without bootloader unlock? Don't understand this.
Can someone give step by step instructions?
Hey, everyone, I just got the new P20 Lite running EMUI 8.0 and on the June security patch. Been through MT's Firmware Finder before with the Huawei Mate 9 Lite; however, I have seen that the app isn't working well with Huawei's servers at the moment - via the screenshot below.
How can I update my phone (model: ANE-LX3C605) to the latest security update (August) using the app - because, I can't seem to receive the OTA Update?
Here's the latest screenshot detailing the problem.
The latest version ANE-LX3C605 is not yet approved
You have to wait for the Full-PV so you can try that update :good:
KingOfMezi said:
The latest version ANE-LX3C605 is not yet approved
You have to wait for the Full-PV so you can try that update :good:
Click to expand...
Click to collapse
Okay, thank you, King - but, how do I actually update it? It appears to me that Firmware Finder is broken.
vince.lupe said:
Okay, thank you, King - but, how do I actually update it? It appears to me that Firmware Finder is broken.
Click to expand...
Click to collapse
You can force it and update ANE-LX3C605B140 with hwOta for p20 lite ,luck :good:
https://forum.xda-developers.com/huawei-p20-lite/development/hwota8-huawei-p20-lite-t3787787
KingOfMezi said:
You can force it and update ANE-LX3C605B140 with hwOta for p20 lite ,luck :good:
https://forum.xda-developers.com/huawei-p20-lite/development/hwota8-huawei-p20-lite-t3787787
Click to expand...
Click to collapse
Yeah, but I would need to rebrand wouldn't I? I am not rooted and don't plan on doing so, my friend.
KingOfMezi said:
You can force it and update ANE-LX3C605B140 with hwOta for p20 lite ,luck :good:
https://forum.xda-developers.com/huawei-p20-lite/development/hwota8-huawei-p20-lite-t3787787
Click to expand...
Click to collapse
@KingOfMezi, I would need to rebrand, wouldn't I?
vince.lupe said:
@KingOfMezi, I would need to rebrand, wouldn't I?
Click to expand...
Click to collapse
instead use HurUpdate 0.4, its better than HwOTA8. HwOTA is quite buggy and broken. With HurUpdater, you dont need to rebrand your phone, however you should download the files which are actually meant for your device as per current ROM installed. Only difficult is that, you have to unlock your device which may result in data wipe, but you can always take a backup and recover. You also need to install twrp (I recommend Pretorian8 twrp). Rooting is not required for that.
fbh59 said:
instead use HurUpdate 0.4, its better than HwOTA8. HwOTA is quite buggy and broken. With HurUpdater, you dont need to rebrand your phone, however you should download the files which are actually meant for your device as per current ROM installed. Only difficult is that, you have to unlock your device which may result in data wipe, but you can always take a backup and recover. You also need to install twrp (I recommend Pretorian8 twrp). Rooting is not required for that.
Click to expand...
Click to collapse
Since Huawei doesn't give out unlock codes any longer for the bootloader, what's the best way to unlock my bootloader? Also, if I can unlock my bootloader, could you please also give me the link to HurUpdate?
vince.lupe said:
Since Huawei doesn't give out unlock codes any longer for the bootloader, what's the best way to unlock my bootloader? Also, if I can unlock my bootloader, could you please also give me the link to HurUpdate?
Click to expand...
Click to collapse
For the time being, unlocking bootloader might cost around 5-15 Euros via DC unlocker. Click here for the detailed guide.
As the user states, you can try your luck to unlock your bootloader for free by mailing huawei care. I dont know how many had success by mailing though, but many succeeded by using DC unlocker.
Now after you unlock your bootloader, you can try using HurUpdater with detailed guide and download link.
fbh59 said:
For the time being, unlocking bootloader might cost around 5-15 Euros via DC unlocker. Click here for the detailed guide.
As the user states, you can try your luck to unlock your bootloader for free by mailing huawei care. I dont know how many had success by mailing though, but many succeeded by using DC unlocker.
Now after you unlock your bootloader, you can try using HurUpdater with detailed guide and download link.
Click to expand...
Click to collapse
Yeah, I'm not gonna pay 5-15 euros to unlock my bootloader... I tried emailing Huawei and they don't give any unlock codes whatsoever. Looks like I might have to wait patiently.
I have the same problem as you, with my p20 lite ane lx3c605, i´ve allready downloaded the last version from FF the b147, but the stock recovery doesn´t istall it, it stays in 5% then says error while updating, it seems the only way to have an updated huawei phone is paying for the code to unlock the bootloader, with my p10 didn´t have that problem because the official unloking code page was still working a few months ago.
I have a BLA-L09 (9.0.0.197 C432E$R1P11), my question is it possible to downgrade the Build to allow me to then use DC Unlocker or another to then unlock the bootloader?
I have seen conflicting information on here as to whether it is possible or not.
Many Thanks
No.
https://forum.xda-developers.com/mate-10/how-to/discussion-hard-brick-infos-t3789044
Yes you can, just use hisuite to do it, how do i know? just done it myself, conversely i wanted to relock my bootloader
ghostofcain said:
Yes you can, just use hisuite to do it, how do i know? just done it myself, conversely i wanted to relock my bootloader
Click to expand...
Click to collapse
It is not just downgrade about. Read the post very carefully. He needs a particular version to unlock the bootloader by DC.
badmania98 said:
It is not just downgrade about. Read the post very carefully. He needs a particular version to unlock the bootloader by DC.
Click to expand...
Click to collapse
Once you've downgraded to 8.x bootloader unlocking is available, if dcunlocker does not support the FW other services are available, the issue with 9.x FW is bootloader unlock/lock commands are removed.
ghostofcain said:
Once you've downgraded to 8.x bootloader unlocking is available, if dcunlocker does not support the FW other services are available, the issue with 9.x FW is bootloader unlock/lock commands are removed.
Click to expand...
Click to collapse
Could you be more specific regarding "other services that are available" now?
Links to them are welcomed.
badmania98 said:
Could you be more specific regarding "other services that are available" now?
Links to them are welcomed.
Click to expand...
Click to collapse
https://ministryofsolutions.com/huawei-bootloader-unlock-paid-service-html
ghostofcain said:
https://ministryofsolutions.com/huawei-bootloader-unlock-paid-service-html
Click to expand...
Click to collapse
It is down. This is the link for M10P
https://ministryofsolutions.com/huawei-bootloader-unlock-service-all-new-models-new-firmwares
Another solution/link?
badmania98 said:
It is down. This is the link for M10P
https://ministryofsolutions.com/huawei-bootloader-unlock-service-all-new-models-new-firmwares
Another solution/link?
Click to expand...
Click to collapse
Donwgrade with Hisuite, then https://forum.xda-developers.com/showpost.php?p=79398318&postcount=4
ghostofcain said:
Donwgrade with Hisuite, then https://forum.xda-developers.com/showpost.php?p=79398318&postcount=4
Click to expand...
Click to collapse
This is Mate 10 pro. You can unlock the bootloader today with DC if you have firmware lower than v. 145 ( C432.). In OP case he can downgrade to v. 157 (xloader 02) but can not downgrade to v. 145 ( xloader 01). If he try to downgrade from xloader 02 to 01 he will brick the phone.
If you have a good solution I will be happy to see it and I will thank you.
Otherwise please stop providing wrong or unverified solutions.
Just FYI Mate 10 Pro has been released with Android 8.
ghostofcain said:
Yes you can, just use hisuite to do it, how do i know? just done it myself, conversely i wanted to relock my bootloader
Click to expand...
Click to collapse
How did you relock your bootloader?
I want to relock mine mate 10.
My model is ALP-L29
software version : 9.1.0.321(C636E5R1P13).
I used Hisuite to downgrade to basic emui 9.0.
Where do i get the stock fw for emui 9.1 C636?
carnby24 said:
How did you relock your bootloader?
I want to relock mine mate 10.
My model is ALP-L29
software version : 9.1.0.321(C636E5R1P13).
I used Hisuite to downgrade to basic emui 9.0.
Where do i get the stock fw for emui 9.1 C636?
Click to expand...
Click to collapse
Did you resolve it? I have emui 9.1, after I unlocked bootloader my phone dialer and messaging stop working, tried to upgrade or downgrade trough Hisuite, no luck. Hisuite said "you have a latest version of firmware"