Hey Guys, i just got my new Mecool M8S Pro L LB Box.
Before i start, could someone confirm that i got every right before i mess it up?
- There are no Custom Roms for the LB-Version.
- However, it is safe to install TWRP (same Version as for the 'non-LB' Version) via SD-Card/Usb
- Installing latest Magisk via TWRP is safe as well
As i only found Posts with People messed their LB Box with Custom Roms, but no Thread confirming that TWRP/Magisk itself is safe, i wanted to make sure i wont run into Troubles...
Hey mate, I have no way to answer your question as I have done something to MG mecool m8s pro LB box. Tried to install a nexus rom from the ota. Worked but setup wizard keeps crashing. Loaded twrp and downloaded many roms, but I try to install and it keeps saying size of image is larger Than target device. Super annoying. It's not bricked but not working. Any thoughts?
Related
Hello, I recently bought an xperia Z2 from someone that had it from the french operator Orange.
Running on a heavily bloated lollipop 5.0.2 with a build number of 23.1.A.1.28 D6503 with a locked unlockable bootloader
Being a samsung user all my life, this seems a new territory to me, I first wanted to clean everything up and have it running on CM12, that seems impossible because of the bootloader lock.
Then I failed rooting it and got really confused. the device also doesnt boot into recovery AT ALL
Can you please help me root the hell out of it and clean all the crap that Orange put in it? and also would you please suggest a debloated clean stock rom(kitkat is preferred)
Thank you so much for your time, I'm looking forward for you replies
Use KingRoot for rooting,install BusyBox, then install custom dual recovery with XZRecovery finally flash SuperSU zip with recovery , here's a link for all the files needed http://www.mediafire.com/download/894tuibsb2a75bm/wts.zip
Well, my dear friend, I failed twice doing that, now im running a clean factory reset and going to try again, will let you know
Flash android version 4.4.2, root this version and then flash the firmware of your choice via recovery (make sure it is a prerooted one, that comes in a Flashable Zip form)
As I know, Sony devices doesn't have accessible stock recovery
You can boot into recovery only after installing custom recovery like :
TWRP - CWM - Philiz Touch
If I Helped, Leave A Thanks ?
Ok so Let me go through the whole story. I wanted to root my Xperia z3 tablet compact SPG611 and I was being a bit of a noob so I opened the bootloader and I was so eager so I get on to rooting as I did it before on my Xperia z3 but on that I dropped it and it broke sooo... but yeah I went to this thread https://forum.xda-developers.com/z3...ment/advanced-stock-kernel-twrp-root-t2959720 and flashed this onto my tablet. But I had 2 problems I was in a boot loop but I was able to go to recovery and the twrp is at v2.7.1.0 so my clever self decided to wipe everything, I mean everything off of the tablet and I didn't back up. This meant that I had no os installed and I can't download a custom rom because there is always a problem, mainly cannot execute updater-binary when I flash paranoid. Also when I flash a newer version of twrp through fast boot it says finished okay but doesn't update on my tablet.
So I'm basically asking has anyone either got a way of updating twrp or a download for another recovery and has anyone got either a stock rom or a custom rom that they dowloaded on a Xperia z3 tablet compact SPG611 that actually worked.
Sorry for the long issue but can someone please help it would be the most appreciated.
Thanks in advance.
I always embed both twrp, SuperSU and Xposed Framework inside the kernel with the Rootkernel script. The only downside is that you have to use this procedure when updating Xposed and SuperSU.
After you created the patched kernel, just flash the kernel with fastboot. After that you have twrp (and SuperSU and Xposed if you included those).
Hi,
android 7.1.1
Just installed TWRP 3.1.1-0. this works fine and I can still boot in TWRP.
After Installation the tablet worked,
but now I always stuck in the SONY XPERIA screen
I was about to install Magisk 19.3. That didn't work, so I tried different version which all failed. Somehow I pressed the button to delete cache/dalvik
With this, I think I did sthg wrong.
I have a backup for Xperia Companion and MyPhoneExplorer, but I can't get the software to recognize the device anymore.
Is there a way I can revive my tablet
What are my options to do?
any help is welcome,
thanks
siggel
finally I could flash SGP712_32.4.A.1.54_1295-4711_R1E.ftf with Xperia flashing Tool 0.9.26.0, so the thing is working.
But what did I wrong?
- deleting the cache within TWRP?
What am I supposed to do to get Magisk working?
As far as I read, I've to install a custom ROM, is it right?
Which one is preferrable?
And will the newest Magisk work with it?
Is there an "all I need to know about Z4 tablet thread"?
siggel said:
finally I could flash SGP712_32.4.A.1.54_1295-4711_R1E.ftf with Xperia flashing Tool 0.9.26.0, so the thing is working.
But what did I wrong?
- deleting the cache within TWRP?
What am I supposed to do to get Magisk working?
As far as I read, I've to install a custom ROM, is it right?
Which one is preferrable?
And will the newest Magisk work with it?
Is there an "all I need to know about Z4 tablet thread"?
Click to expand...
Click to collapse
Afaik Magisk requires LineageOS on this tablet. I'm running both successfully.
Hello. I am a newbie in regards with the rooting.
I have never successfully rooted any of my devices before.
Details:
*I have a Sony XPERIA M4 Aqua Model E2353 With Bootloader Unlocked.
*I am currently using a Windows 10 ASUS Laptop (I have no access to Win7 laptops)
I have successfully made (idk how I even did it, I just followed some forum here and installed Flashtool) made my phone boot in recovery mode to TWRP but after connecting it to the laptop, my laptop cant detect my phone so I transfered the zip SUPERSU in my phone and after installing it in recovery mode my phone literally went **** and stucked in bootloop for 3+ hours.
Eventually with some help. I installed ftf. stock rom of my Sony M4 E2353 and flashed it with the flashtool and successfully got my phone back--BUT IN Stock Rom only and ofc UNROOTED.
It's May 2020 now and I need the best ROM to flash in my Sony and I also desperately need help for ROOTING my E2353, Idk how to do the TWRP thing tbh, it just made a newbie like me bleed in my brain --but is there someone who could help me in rooting my phone first? (
Thank you so much.
lol no one replied :'(
Yuriellikesyou said:
Hello. I am a newbie in regards with the rooting.
I have never successfully rooted any of my devices before.
Details:
*I have a Sony XPERIA M4 Aqua Model E2353 With Bootloader Unlocked.
*I am currently using a Windows 10 ASUS Laptop (I have no access to Win7 laptops)
I have successfully made (idk how I even did it, I just followed some forum here and installed Flashtool) made my phone boot in recovery mode to TWRP but after connecting it to the laptop, my laptop cant detect my phone so I transfered the zip SUPERSU in my phone and after installing it in recovery mode my phone literally went **** and stucked in bootloop for 3+ hours.
Eventually with some help. I installed ftf. stock rom of my Sony M4 E2353 and flashed it with the flashtool and successfully got my phone back--BUT IN Stock Rom only and ofc UNROOTED.
It's May 2020 now and I need the best ROM to flash in my Sony and I also desperately need help for ROOTING my E2353, Idk how to do the TWRP thing tbh, it just made a newbie like me bleed in my brain --but is there someone who could help me in rooting my phone first? (
Thank you so much.
Click to expand...
Click to collapse
install stock firmware again (everything) then install the recovery, install Magisk (no supersu today is 2020) and it'll work if im right
tretrauit said:
install stock firmware again (everything) then install the recovery, install Magisk (no supersu today is 2020) and it'll work if im right
Click to expand...
Click to collapse
can you help me or show me the way step by step :crying: i really dont know how
Yuriellikesyou said:
can you help me or show me the way step by step :crying: i really dont know how
Click to expand...
Click to collapse
Install magisk app from website then get your stock boot img and patch it using magisk then go to twrp and click on install then change to flash boot img (find it after clicking install) and flash the patched boot img as a boot image and you will be rooted, if you still have problem I will reply you
Hi,
Firstly, sorry for the lack of references in my post, as this is my first one, I'm not allowed to add URLs.
I recently purchased a Blackview BV9500 Plus and I have been trying to flash TWRP, I wanted to try different custom ROMs since the stock ROM for BV9500 PLus is apparently no longer updated (info comes from a Blackview forum).
The TWRP version that I'm trying to flash is 3.3.1 for BV9500 Plus (unofficial).
I have tried different ways, using fastboot flash recovery, using SPFlashTool and flash directly the recovery file, and it looks like the flashing succeeded but I have never been able to boot into TWRP. When I turn on the phone pression the Volume UP key, I see the Blackview logo (which sometimes appears color inverted black <-> white) and then nothing happens, it goes back to rebooting until I let go of the Volum UP key, then it starts normally. I even tried with a different TWRP version (3.2.3 for Android 9.0 Pie MT6771, unofficial) with same results ...
I unlocked the bootloader (ticked it in the phone settings) and did a fastboot flashing unlock, I tried rooted (with last version of Magisk with which I patched the boot.img and flashed), not rooted ... with no luck ... (I even lost my IMEI after a complete format with SPFlash along with the googlekey, fortunately I was able to reflash everything thanks to BV support :laugh::victory
Many thanks in advance for your help, I have been trying to figure this all out for a few days now ...
Best regards.