Simply, after selecting reboot in "bootloader" from the twrp, black screen and when I connect to the PC it plays the sound of the USB inserted but not recognized, I already tried to hold down the power buttons plus all combinations with the volume keys, but it continues to go off and on, reproducing the connection and USB disconnection sound. Even with disconnected USB nothing happens. I'm going crazy... thanks in advance
Related
I just tried to boot in to the boot loader by holding down the volume-down button while doing a reset from android (power button, tap reset) - I know it's not the right way but I was just trying it. Anyway, now my phone won't turn on. I've tried taking out the battery, putting it back in, booting to the boot loader by holding down volume-down and then holding down the power button, but I get no vibration, nothing. The screen just stays dark.
Orange light comes on when plugged in to charger. When I plug it in to my PC (Windows 7) I get a USB connect sound which is like three low notes in quick succession and then when I unplug I get the USB disconnect sound (higher note then low note).
Any ideas?
Phone is HTC Desire X in case it's not obvious by being posted in this thread.
Thanks
Try a longer press approx for 30 seconds
sent from my HTC DX
I am owner of a Lenovo S6000L-F tablet and suddenly the power button stops to responce when the tablet is turn off.
To turn it on, I have to use the combination of power button + volume down, to go into factory mode and then choose "reboot" .
When the tablet turns on, everything is fine. I can use the power button to turn the screen on or off and I can use it to turn the device off. I believe that there is no hardware broblem because the power button works fine when the tablet is on and it has power. The problem occurs only when the tablet is power off.
After all I tried to reset the device to factory settings with no result.
The only way to turn on my tablet (exept with factory mode) is to connect it to my pc via USB cable and then the power button works as usually. This tip is working ONLY when I connect the tablet with USB cable to my PC and NO with the USB power charger.
Please I need your help.
I enabled the setting earlier where your touches are shown, and that is the only thing I can see on the screen, apart from the grey pop ups that come from the bottom when you try to use Bixby (it says that Bixby cannot be used while the power saving mode is on) or if I plug in a usb (it tells me that I can't transfer data until I enable the option to do so on the phone)
The power meter when the phone is shutdown and charging is shown too, and so is the Samsung logo on boot.
The phone still vibrates.
I don't mind factory resetting, but I cant actually transfer any of my data to my computer since it denies the permission without me enabling it on the phone.
Power button + Volume down doesn't fix it.
Power button + Volume Up + Bixby send's me to a list with a few options.
I've already tried resetting the cache, which did nothing.
Safe mode shows the words 'Safe mode' in the bottom left of the screen, but everything else stays the same. The rest of the screen is still black and the phone behaves the same way.
I have USB debugging enabled, so could I run an adb command to turn off power saving?
When someone calls me, it rings, but nothing shows up on the screen. I know that the touchscreen works but trying to press and guess the buttons didn't answer or decline. I could just be pressing on the wrong area though.
Dears,
with firmware G965FXXU1BRF8_CL13792060_QB18608589_REV01 when screen is locked and display goes off nothing happens pressing power button, screen doesn't wake up.
The issue happens only when USB cable is not plugged.
Nothing happens connecting USB cable, so maybe phone gets stuck, I can only soft reset.
Magisk 16.6 is installed, but I don't think it could cause this issue.
Any suggestions?
Tks!
Samsung Galaxy S9+ No custom, Just a normal phone from T carrier.
The situation is as follow. I wake up everyday and cannot turn on my phone, the screen is black but I hear it beeping when i press the volume keys. I do a Vol down Power to restart thinking it will , it restarts but the screen is black and unresponsive no matter what I do, the Power button is still functional at this moment.
What I quickly did is I connected the phone to my monitor using USB-C and i have a mouse connected to the internal KVM of the monitor- , perfect got excited that the phone at least works, on the monitor it shows up perfectly, I can control the phone with the mouse, enter my 4 digit password, works. That was the situation yesterday. Should have backed up then but didnt.
Today I wake up, the Power button does not work, so I read and find out that I can go downlead mode which I did using the Vol down and Bixby and plugging the charger.
tried the Vol Down and Power to restart it does not, so again I go in to the download mode and accidently press Volume up, Now I am completely stuck on Downloading... Do not turn off target
1. Power button does not work- I have no idea how to get the past Downloading screen now
2. Would I be able to recover anything it its really dead?
3. Any tips?