hii guys i own huawei p9 lite
i rooted the mobile from more 3 months and every thing was okay since i found an update message in the sittings.
i was wondered because i know that no updates might reach my phone after update ... i tried to do the update from the sittings but it failed after I was curious about the new gestures on this update so i tried to install it from recovery but when the phone rebooted i shocked when i found that was failed and some of system apps and sim card apps disappeared and the signal too then the mobile was restarting without i do ... but okay i was using it wzout all of this then i decided to repair it i opened the recovery of the root that was revolution recovery then i tried to install a stock firmware again but its failed and give me message that is "no os installed ''
i tried to find a solution online i found that i can restore the system but its failed again
i found another solution to install custom rom and i did it and it was success but it give me message to install the stock recovery and that i need to install when i give it the permission to do that it was rebooting wizout install the recovery .
i dont now what is the problem but i really get tired of searching all the day every day since one week to find a solutions but i cant, i will be thankful if anyone knows the solution
Related
I installed software that adjusted the fonts and then had to reflash the phone. The problem is that the fonts have all disappeared so it shows no text anywhere. I have tried to install the font zip update to try and replace them and having tried several zip files they all come up with an signature verification error and refuse to install.
The problem is I cannot get the phone to run properly without the fonts - its not rooted so it wont install them, I cant get a copy of the phone rom. Is there any way I can get this phone back and working without having the phone actually working in normal (non recovery) mode?
I have flashed phones before so I have experience with this sort of thing but this has me completely stumped.
flash this font http://forum.xda-developers.com/devdb/project/dl/?id=7704
It didnt work. Same error. Am using SD card to try and install and every single time get this E:signature verification error. Have tried looking elsewhere on here and found nothing that makes any sense as to solving this problem - I dont really want to chuck out a perfectly useable phone so if anyone has any ideas, pleae let me know.
My Vega Iron suddenly restart and encountered this error "System Restart because of Application Error". The first time, it restarted just fine but on the second one it always stucked at L+ Logo. I already tried factory reset on the stock recovery but it didn't solved it. I also tried the Vega Self Upgrade but always have an error on USB Driver on 3 PCs I used. I can't find any help on the net on how to properly run it. Then I tried to flash a latest firmware but with sms fix using CWM Recovery but still encounter same error. I actually found a vietnamese forum with the error but I can't understand even if I translate it.
Can anyone please help me? Current firmware is S1235210.
Hi all,
I tried for a few days and seek no solution, therefore I would like to ask if anyone have such situation and got a solution.
Model: Lenovo S939
It was with android 4.2.2 which is the stock rom until I successfully flash it to android 4.4.2 which is the official VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36 about two months ago.
I think I accidently deleted some apps in the phone(I was trying to clear personal contents) and now the phone cannot turn on at all. I am able to connect the phone to my PC using USB and have the driver for it. So I can use SP_Flash_Tool_v5.1524.00.000. I have stock roms S939_S129_140217 and S939_S126_140109 in scatter form.
I flash one of them using the SP tool, but when I finish downloading and reboot, it go back to android vibe UI v2.0, and all sort of system processes stopped continuously, I cannot access the phone at all.
Then I reboot and boot into recovery ( CWM 5 for S939, get from Needroom). I have quite some customs roms saved in my Sd cards which I got from needroom.com:
VIBEUI_V2.0_1501_7.5.1_DEV_S939_WC19.ZIP
VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36.zip
Material_ROM_V3.zip
Loli_Dark_S939_FASTCHIP.zip
I try to flash every one of them, all of them say successful, but when reboot, I boot back to vibe UI 2.0 and all systems processes stopped continuously. I tried to patiently click “OK” and try to access the system setting to enable to USB debugging, but no success.
Have any one got such experience and a solution of it? Spent too much time trying to figure out and appreciate any input.
Regards,
Lacer
when i try to flash roms in recovery...
additional infos, when i try to flash roms in recovery mode, there are warning about no context
and if i go into meta mode and click the option to clear emmc, it restart itself and go back to the vibe ui with non stop pop out of processes stop error.
Lacerlacer said:
Hi all,
I tried for a few days and seek no solution, therefore I would like to ask if anyone have such situation and got a solution.
Model: Lenovo S939
It was with android 4.2.2 which is the stock rom until I successfully flash it to android 4.4.2 which is the official VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36 about two months ago.
I think I accidently deleted some apps in the phone(I was trying to clear personal contents) and now the phone cannot turn on at all. I am able to connect the phone to my PC using USB and have the driver for it. So I can use SP_Flash_Tool_v5.1524.00.000. I have stock roms S939_S129_140217 and S939_S126_140109 in scatter form.
I flash one of them using the SP tool, but when I finish downloading and reboot, it go back to android vibe UI v2.0, and all sort of system processes stopped continuously, I cannot access the phone at all.
Then I reboot and boot into recovery ( CWM 5 for S939, get from Needroom). I have quite some customs roms saved in my Sd cards which I got from needroom.com:
VIBEUI_V2.0_1501_7.5.1_DEV_S939_WC19.ZIP
VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36.zip
Material_ROM_V3.zip
Loli_Dark_S939_FASTCHIP.zip
I try to flash every one of them, all of them say successful, but when reboot, I boot back to vibe UI 2.0 and all systems processes stopped continuously. I tried to patiently click “OK” and try to access the system setting to enable to USB debugging, but no success.
Have any one got such experience and a solution of it? Spent too much time trying to figure out and appreciate any input.
Regards,
Lacer
Click to expand...
Click to collapse
it seems like something to do with the error 1041. I failed to test the nand flash
It seems like something to do with the error 1041. I failed to run a dedicated memory test in SP tool. Anyone have any though?
Lacerlacer said:
additional infos, when i try to flash roms in recovery mode, there are warning about no context
and if i go into meta mode and click the option to clear emmc, it restart itself and go back to the vibe ui with non stop pop out of processes stop error.
Click to expand...
Click to collapse
Hello everyone ,
it is nice for me to join your forum . i am posting this thread after weeks of searching and many tries but none worked
I have Huwaei Y520-U22V100R001C328B111 phone
the problem is that i lose the network signal because invalid imei problem
and many of error messages " Unfortunately app has stopped " for many apps
and when trying to restart the phone it stucks at the android system recovery e3 screen
i downloaded the official rom from huawei site Y520-U22V100R001C328B111
and installed it from the SD card from android system recovery e3 screen
bu selecting update from sd card or by using SP_Flash_Tool_v3.1320.0.174 which is included in the official rom downloaded through usb cable
and it worked but with invalid imei in both methods
i tied formating the phone with the bootloader file too as Huawei site explain and downloaded the rom again
it worked too but with invalid imei problem too
i tried to solve the invalid imei by rooting the phone or without rooting it and both methods worked and the phone works for couple of days then it fails again with "Unfortunately app has stopped" messages and invalid imei again then stuck again at android system recovery e3 screen
what else to do please ??!! :crying: i am hopeless now
Can anyone help me ??
Can you try this? Good luck!
Thanks RAZERZDAHACKER
But this is not my main problem , i can solve the invalid IMEI problem by 2 successful methods.
My main problem after flashing it , it stay couple of days works properly then some apps stop working and messages like " Unfortunately app has stopped " appear and when restart it it stucks at the android system recovery e3 screen
i am using the official rom from huawei site to flash it .
What to do else ??
Abdelrahman Elsobky said:
Thanks RAZERZDAHACKER
But this is not my main problem , i can solve the invalid IMEI problem by 2 successful methods.
My main problem after flashing it , it stay couple of days works properly then some apps stop working and messages like " Unfortunately app has stopped " appear and when restart it it stucks at the android system recovery e3 screen
i am using the official rom from huawei site to flash it .
What to do else ??
Click to expand...
Click to collapse
I assume you've redownloaded the ROM to remove possible corruption. Hmm, get a log for when that happens (maybe you did a pattern?) And do some research on it
RAZERZDAHACKER said:
I assume you've redownloaded the ROM to remove possible corruption. Hmm, get a log for when that happens (maybe you did a pattern?) And do some research on it
Click to expand...
Click to collapse
Sorry , i did not get you . what do you want me to do exactly ?
the phone situation now is stuck at android system recovery screen , and there is a file cllaed update.zip i moved it to SD card to apply update from sdcard , i got it from Huawei site was in Y520-U22V100R001C328B111 .rar
what to do now ?
hi.. my huawei y520-U22 goes to android recovery sytem recovery.. i've tried every steps to reset yet still it keeps going back to the recovery system screen..
what could be the possible reasons??
Hi , try to flash with this rom
1. Install Y520-U22 Usb Drivers
Link: http://www.mediafire.com/file/ez0wm6g70sen3m6/MTK+usb+drivers.rar
2. Download Huawei y520-u22 b112 scater + flash file password is huawei4
http://download1722.mediafire.com/e...Y520-U22+MTK6572+100%+tested+scatter+file.rar
3.Power Off your Mobile and remove Battery.
4.Download and extract spflash tool.
Link: http://www.mediafire.com/file/77rcxw2iew026i5/SP_Flash_Tool_v5.1408.00.rar
REST YOU HAVE IN THIS VIDEO
https://www.youtube.com/watch?v=O_slK9pMkoA
Good Luck
Hi guys.. I have a prolem with my honor 8x.. So i got android pie update yesterday so i start download it and tried to install it and in the middle of installation process the device stoped and gone to eRecovery mode and i can't do anything to solve it even i tried to flash it but doesn't work.. It keep saying update failed to getting package info and i can't turn it off.. Plz help ?