This is a custom recovery based on twrp 3.2.3 with project treble support.
Enjoy......
For more details.... visit
https://forum.xda-developers.com/pr...niversal-treble-implementation-types-t3860418
Downloads
https://androidfilehost.com/?fid=11410932744536991904
Sent from my YU5510 using Tapatalk
Project treble ROM non sa install hoga ...and flashing procedure
Sent from my YU5510 using Tapatalk
---------- Post added at 03:54 AM ---------- Previous post was at 03:02 AM ----------
ROM konsa treble supported
hoga ...u make a video for its
Sent from my YU5510 using Tapatalk
Aswin Asone said:
This is a custom recovery based on twrp 3.2.3 with project treble support.
Enjoy......
For more details.... visit
https://forum.xda-developers.com/pr...niversal-treble-implementation-types-t3860418
Downloads
https://androidfilehost.com/?fid=11410932744536991904
Click to expand...
Click to collapse
Screenshot please
hey there is someone to care about this old, I really appreciate your hard work you do, thanks, I want to know further flashing process for run gsi or setup vendor. . or just need to flash gsi anymore . . . THANKS AGAIN
Sorry I don't work on that anymore
Sent from my Micromax Q352 using Tapatalk
If anyone interested, they can download asone recovery and work on treble implementations. I can give separated vendor part based on pie. We just needed to make a partition or any root folder or any newly created folder on root or data folder as the vendor partition. And that path should be defined in the recovery. Then we can flash the vendor and then any GSI will work on it.
NOT ONLY YUREKA, PROJECT TREBLE CAN BE IMPLEMENTED IN ANY ANDROID WITH THIS METHOD.
And if someone doesn't understand this, just make negative comments and say to close this project like before.
Sent from my Micromax Q352 using Tapatalk
Related
Hi there!
I'm Amit and I have my Xiaomi Redmi Note 4X. I've unlocked the bootloader and installed aex nougat ROM as my default ROM. Now I want to install multiple roms with dual boot Patcher. The problem is that whenever I install my ROM on data partition and switches to it and reboot to that ROM. It vibrates three times and reboot to recovery. It had never dual booted any ROM due to this problem.
If anyone has any solution do post in reply.
I'll be very thankful to you.
Thank You!
I do not see any benefit of using dual boot roms. Have you properly read the OP first? which is the secondary rom? I suggest to stick on one rom as far as I know dual boot can seriously screw up the device as this case https://forum.xda-developers.com/redmi-note-4/help/xiaomi-redmi-note-4-mido-bootloop-fix-t3730828.
I just wanna solution for this problem if you have any
dual book patcher wont work with oreo unfortunately.
Cannot use secondery rom as Android 8 if Primary rom is android 7.
My English not well. But, do you understand?
I'm dual booting ressurection remix OS nougat with my primary ROM aex nougat.
I'm not using Oreo.
I think your kernel needs to be patched to support dual boot and ask the developers of both roms if their roms support dual booting or not, if still does not work try 'multiboot' which does the smae thing with little difference.
1) kernel of both the ROM supports dual booting
2) Redmi Note 4X doesn't support multiboot
Thank You
Amit Kumar R said:
Hi there!
I'm Amit and I have my Xiaomi Redmi Note 4X. I've unlocked the bootloader and installed aex nougat ROM as my default ROM. Now I want to install multiple roms with dual boot Patcher. The problem is that whenever I install my ROM on data partition and switches to it and reboot to that ROM. It vibrates three times and reboot to recovery. It had never dual booted any ROM due to this problem.
If anyone has any solution do post in reply.
I'll be very thankful to you.
Thank You!
Click to expand...
Click to collapse
I have already written the solution for that in my thread-https://forum.xda-developers.com/re...FjAAegQIBRAB&usg=AOvVaw0S9V0RdltFMkdFLYccgPeE
Read Notes(in red text) in OP.
Your phone is encrypted. To solve this Formate from TWRP.
Always read OP carefully before asking any questions...
Sent from my mido using XDA Labs
---------- Post added at 03:05 PM ---------- Previous post was at 02:56 PM ----------
mohsinreadymoney said:
I do not see any benefit of using dual boot roms. Have you properly read the OP first? which is the secondary rom? I suggest to stick on one rom as far as I know dual boot can seriously screw up the device as this case https://forum.xda-developers.com/redmi-note-4/help/xiaomi-redmi-note-4-mido-bootloop-fix-t3730828.
Click to expand...
Click to collapse
If your satisfied with one Rom, then yes there is no benefit of using DBP. But if you want try and test out other ROMs without messing your daily driver rom then DBP is alot helpful...
DBP don't harm your device...
It patches secondary Rom only and doesn't modify primary...
BTW if mess things up you can always do a clean start...
Sent from my mido using XDA Labs
bad_request said:
I have already written the solution for that in my thread-https://forum.xda-developers.com/re...FjAAegQIBRAB&usg=AOvVaw0S9V0RdltFMkdFLYccgPeE
Read Notes(in red text) in OP.
Your phone is encrypted. To solve this Formate from TWRP.
Always read OP carefully before asking any questions...
Sent from my mido using XDA Labs
---------- Post added at 03:05 PM ---------- Previous post was at 02:56 PM ----------
If your satisfied with one Rom, then yes there is no benefit of using DBP. But if you want try and test out other ROMs without messing your daily driver rom then DBP is alot helpful...
DBP don't harm your device...
It patches secondary Rom only and doesn't modify primary...
BTW if mess things up you can always do a clean start...
Click to expand...
Click to collapse
Thanks that cleared my misunderstanding about DBP.
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
The goal of this ROM is to provide full Treble-compatible hardware support, and nothing else.
This means that hardware which DON'T have Treble API won't be supported, like Essential's external camera.
No feature will be added. This will ease forward porting to new Android versions, which is the very goal of Project Treble
My hope is that other ROM developers will use this ROM as a basis to construct more advanced ROM.
For a list of treble supported devices, consult and fill https://github.com/phhusson/treble_experimentations/wiki
How to flash:
1- Flash a treble rom (GSI only has 8.1 vndk. 8.0 probably won't work.)
2- Extract p-gsi-built.zip and flash system.img
3- Flash p-boot-other-fixes.zip, wifi fix, POST-sGSI_boot-patch.zip (thanks to erfanoabdi bootpatcher from p semi-gsi)
4- Reboot
Bugs:
- Camera
- Flashlight
-VoLTE
(Tested on Redmi Note 4 and Redmi 4A, bugs can change according to device.)
Download:
9.0.0_r3 (2018-08-07):
system.img for A ARM64 devices vanilla
Telegram Account: MacTavishAO
Thanks to: @erfanoabdi @phhusson and thanks to ChristianEM for wifi fix.
"Bayram Kılıç and Burak Mete Erdoğan the guys who says pixel stock and aosp is totally same. These 2 guys said to me 'Idiot released same rom. Unnecessary'. LOL. From their mouths; 'Pixel stock is started being AOSP. Pixel Team will release AOSP stock rom for pixel devices. It is pretty smooth. And said Pixel Team would give P immediately if AOSP wasn't problematic they fixed it.' Pixel's UI isn't AOSP UI lol "
for any device ?, thanks
Gửi từ HTC One M9 của tôi bằng cách sử dụng Tapatalk
Thanks. I'll try @ my #Whyred.
arm 32 please?
I can't check mobile data. I don't have mobile data.
Huawei 8.0 vendor supported?
---------- Post added at 04:37 PM ---------- Previous post was at 04:33 PM ----------
ataberkozen said:
I can't check mobile data. I don't have mobile data.
Click to expand...
Click to collapse
8.0 vendor supported of Huawei
arshilhonor6x said:
Huawei 8.0 vendor supported?
---------- Post added at 04:37 PM ---------- Previous post was at 04:33 PM ----------
8.0 vendor supported of Huawei
Click to expand...
Click to collapse
U have to try. Didn't tried. But gsi isn't included vndk-26 may won't work.
Can you mention which version of vendor is supported. Samsung galaxy s9+ Exynos has official treble and supports gsi roms but it only has 8.0 vendor file.
bobandar said:
Can you mention which version of vendor is supported. Samsung galaxy s9+ Exynos has official treble and supports gsi roms but it only has 8.0 vendor file.
Click to expand...
Click to collapse
Mentioned.
ataberkozen said:
Mentioned.
Click to expand...
Click to collapse
Thanks !
ataberkozen said:
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
Click to expand...
Click to collapse
Downloading, thanks.
Will you be doing an a/b flashable version as well?
daleski75 said:
Will you be doing an a/b flashable version as well?
Click to expand...
Click to collapse
Tomorrow. If u have a/b device can you text me from telegram ? @MactavishAO
ataberkozen said:
Tomorrow. If u have a/b device can you text me from telegram ? @MactavishAO
Click to expand...
Click to collapse
I have a OnePlus 6 so happy to test this (will make a full backup of my phone tonight in case of data loss) and will put on telegram so I can message you too.
Thanks, maybe I'll doing a test on Redmi 4X.
It doesn't boot on a Mi Pad 4.
I don't have a server to build an A/B arm64 image, so I'd be extremely grateful if someone did, please!
---------- Post added at 22:41 ---------- Previous post was at 22:40 ----------
ataberkozen said:
Tomorrow. If u have a/b device can you text me from telegram ? @MactavishAO
Click to expand...
Click to collapse
I have a Razer Phone. Hmu at @linuxct on telegram if interested
Hey, tested it on a oneplus 5t with mokee vendor, isn't work, it stuck at boot logo
CarlosM256 said:
Hey, tested it on a oneplus 5t with mokee vendor, isn't work, it stuck at boot logo
Click to expand...
Click to collapse
DId you make sure you installed Mokee & the no-verity zips so your storage is unencrypted? GSIs won't boot with encrypted storage. Also make sure you factory reset in TWRP before you attempt to boot so your data folder is all fresh and clean.
Can someone share some screenshots?
After a decent amount of time reading posts on various threads, I am unable to figure out which vendor firmware version I need to flash with a custom ROM, say, Pixel Experience. Can somebody please clarify this for me?
Thanks
Always use the latest vendor fw available...
Tron_Legacy1680 said:
After a decent amount of time reading posts on various threads, I am unable to figure out which vendor firmware version I need to flash with a custom ROM, say, Pixel Experience. Can somebody please clarify this for me?
Thanks
Click to expand...
Click to collapse
there is a minimum vendor required for each rom
mostly written in instruction in OP
u can flash any newer vendor ( except for , i would say, bad / broken vendors)= (rom/vendor incompatibility)
for PE u can use 25/ vendor, or later ( some of those newer vendors are incompatible.. just skip them .. .( trial/error here on xda)
* if u r encrypted u flash newer vendor only, UNLESS u
1. have modified system or
2 . used modified vendor
3. nonencrypted..
then u have to flash DFE after the newer vendor to prevent forced encryption
Sent from my beryllium using XDA Labs
ahmd gom3aa said:
there is a minimum vendor required for each rom
mostly written in instruction in OP
u can flash any newer vendor ( except for , i would say, bad / broken vendors)= (rom/vendor incompatibility)
for PE u can use 25/ vendor, or later ( some of those newer vendors are incompatible.. just skip them .. .( trial/error here on xda)
* if u r encrypted u flash newer vendor only, UNLESS u
1. have modified system or
2 . used modified vendor
3. nonencrypted..
then u have to flash DFE after the newer vendor to prevent forced encryption
Sent from my beryllium using XDA Labs
Click to expand...
Click to collapse
So, coming from stock MIUI, I just flash the compatible vendor, and the rom?
Tron_Legacy1680 said:
So, coming from stock MIUI, I just flash the compatible vendor, and the rom?
Click to expand...
Click to collapse
yes.
backup data & do whatever u want ??
Sent from my beryllium using XDA Labs
---------- Post added at 12:55 PM ---------- Previous post was at 12:52 PM ----------
factory reset of course
but i think u already know that
Sent from my beryllium using XDA Labs
I flashed the latest vendor with custom rom but there were a lot of issues camera wasnt working properly, wifi connectivity issue and a few more any idea what could be wrong
husainkm said:
I flashed the latest vendor with custom rom but there were a lot of issues camera wasnt working properly, wifi connectivity issue and a few more any idea what could be wrong
Click to expand...
Click to collapse
Flash an older vendor like 9.6.18. It's working for me.
Camera crash if i i switch in menu to SAT
How to install:
1. wipe all partitions: cache , dalvik, system, vendor, and format data after this reboot recovery
2. copy all files to internal storage
3. flash boot.img and reboot recovery
4. flash permissiver_v4.zip
5. flash vendor
6. flash gsi img and reboot system
7. reboot to recovery and flash Xceed-Dipper-prod-bld9Q.zip and Magisk v20.4.zip to fix brightness control
8. Install Xiaomi-SDM845-TweakModule-v17.zip, reboot and enjoy
Note
- I'm just shared so don't ask about bug but it seems stable
- You can find screenshots, update and more support device in here
https://descendant.me/about/
- Sorry if my EL to bad. I'm from Vietnam and my english is not good
Download
- You can find everything you need in here:
https://drive.google.com/open?id=1SKrLi-mXTstCEzKgGiXLLy1HYnKsz4rK
Thanks for your efforts but maybe there is someone who can build this for dipper
[emoji1191]
where is the link you shared this links from ????
khedr30000 said:
where is the link you shared this links from ????
Click to expand...
Click to collapse
I don't know exactly from which one he chose, but the downloads page is this one: https://downloads.descendant.me/
I flashed descendantOS GSI on Dipper. The ROM was stable and smooth but there are some issues (maybe for me only) quick panel was not properly working. Hope that someone will build for Dipper someday any ideas to fix??
[emoji1191]
ammaralidj said:
I flashed descendantOS GSI on Dipper. The ROM was stable and smooth but there are some issues (maybe for me only) quick panel was not properly working. Hope that someone will build for Dipper someday any ideas to fix??
[emoji1191]
Click to expand...
Click to collapse
Updated in 13/04, If you want to try again
Sent from my Mi 8 using XDA Labs
harnkalkn said:
Updated in 13/04, If you want to try again
Sent from my Mi 8 using XDA Labs
Click to expand...
Click to collapse
Yes i used latest gsi. Seems stable but faced some issues like no caller voice in earpiece
Overall rom is good, may be someday someone will built it for dipper
[emoji1191]
ammaralidj said:
Yes i used latest gsi. Seems stable but faced some issues like no caller voice in earpiece
Overall rom is good, may be someday someone will built it for dipper
[emoji1191]
Click to expand...
Click to collapse
I hope so.
Sent from my Mi 8 using XDA Labs
---------- Post added at 06:48 AM ---------- Previous post was at 06:46 AM ----------
ammaralidj said:
Yes i used latest gsi. Seems stable but faced some issues like no caller voice in earpiece
Overall rom is good, may be someday someone will built it for dipper
[emoji1191]
Click to expand...
Click to collapse
Did you try which version? A only or ab only?
Sent from my Mi 8 using XDA Labs
harnkalkn said:
I hope so.
Sent from my Mi 8 using XDA Labs
---------- Post added at 06:48 AM ---------- Previous post was at 06:46 AM ----------
Did you try which version? A only or ab only?
Sent from my Mi 8 using XDA Labs
Click to expand...
Click to collapse
Ab
[emoji1191]
I'm not the creator, but want to start a discussion on that build!
I found the non-Compact build via Google search:
https://download.pixelexperience.org/g8341
https://download.pixelexperience.org/g8342
WARNING: Both builds are marked "stable", but are very buggy and should not be named "stable" at all!
Rooted_Ansh said:
They are just marked stable.. but they are beta release..
Click to expand...
Click to collapse
Rooted_Ansh said:
[The official build] is sodp (Sony open devices) and [Rooted_Ansh XZ1c build] has stock libs, drivers, and camera
Click to expand...
Click to collapse
How to flash:
shuang0922 said:
oem b? xz1 is A only.just need flash one img
How to flash Pixel Experience (PE) for yoshino platform (like XZ1):
boot twrp, flash pe zip, reboot fastboot, flash oem, then fastboot -w and reboot
Click to expand...
Click to collapse
Did any one give it a try ?
Sent from my G8342 using Tapatalk
sounds reaaaaly interesting!
could someone provide a full how-to guide?
thank you very much!!
BoZ
Just tried it and sadly it's not stable as this site said it's too slow many random restart Google camera stop working I'm back again to lineage 17
Sent from my GM1913 using Tapatalk
sorry mate, where did you find they say it's slow and has random reboots?
bozinsky73 said:
sorry mate, where did you find they say it's slow and has random reboots?
Click to expand...
Click to collapse
The hole system is unstable , while you navigate between apps also camera works only for the first time but after that it didn't work even i cleared it's cash and storage several times , sound also not working !!
This rom still needs a lot of work
Sent from my GM1913 using Tapatalk
SGH-i200 said:
XZ1c unofficial build by Rooted_Ansh (installation instruction for XZ1c, which is missing for XZ1!?):
https://forum.xda-developers.com/xp...el-experience-10-0-plus-update-t4071563/page7
Click to expand...
Click to collapse
What do you mean by the last line ? Installation instructions missing ?
---------- Post added at 12:26 AM ---------- Previous post was at 12:19 AM ----------
SGH-i200 said:
Same maintainer released this XZ1c official build:
https://download.pixelexperience.org/g8441
XZ1c unofficial build by Rooted_Ansh (installation instruction for XZ1c, which is missing for XZ1!?):
https://forum.xda-developers.com/xp...el-experience-10-0-plus-update-t4071563/page7
Click to expand...
Click to collapse
Also could you please remove unofficial xz1c links from here ?.. I have it's thread opened being a maintainer..
Hi, coming from LOS 17.1 I cannot follow instructions on official pixelexperiences site:
when I try to flash
fastboot flash oem_a SW_binaries_for_Xperia_Android_10.0.7.1_r1_v5a_yoshino.img
over fresh stock it turns out with error: no such partition
same when flashing oem_b
is there a fix for that?
thank you very much!
bozinsky73 said:
Hi, coming from LOS 17.1 I cannot follow instructions on official pixelexperiences site:
when I try to flash
fastboot flash oem_a SW_binaries_for_Xperia_Android_10.0.7.1_r1_v5a_yoshino.img
over fresh stock it turns out with error: no such partition
same when flashing oem_b
is there a fix for that?
thank you very much!
Click to expand...
Click to collapse
just type " fastboot flash oem oem.img " and flash the rom with twrp in Los17
bozinsky73 said:
Hi, coming from LOS 17.1 I cannot follow instructions on official pixelexperiences site:
when I try to flash
fastboot flash oem_a SW_binaries_for_Xperia_Android_10.0.7.1_r1_v5a_yoshino.img
over fresh stock it turns out with error: no such partition
same when flashing oem_b
is there a fix for that?
thank you very much!
Click to expand...
Click to collapse
oem b? xz1 is A only.just need flash one img
---------- Post added at 02:50 AM ---------- Previous post was at 02:46 AM ----------
bozinsky73 said:
Hi, coming from LOS 17.1 I cannot follow instructions on official pixelexperiences site:
when I try to flash
fastboot flash oem_a SW_binaries_for_Xperia_Android_10.0.7.1_r1_v5a_yoshino.img
over fresh stock it turns out with error: no such partition
same when flashing oem_b
is there a fix for that?
thank you very much!
Click to expand...
Click to collapse
How to flash PE :
for yoshino platform : boot twrp, flash pe zip, reboot fastboot, flash oem, then fastboot -w and reboot
u can find these in telegram group
shuang0922 said:
oem b? xz1 is A only.just need flash one img
---------- Post added at 02:50 AM ---------- Previous post was at 02:46 AM ----------
How to flash PE :
for yoshino platform : boot twrp, flash pe zip, reboot fastboot, flash oem, then fastboot -w and reboot
u can find these in telegram group
Click to expand...
Click to collapse
Thank you very much! I'm a totaly noob on xperia firmwares
Just to be sure: is oem.img the SW_BINARIES_FOR_XPERIA_ANDROID_10.0.7.1_R1_V5A_YOSHINO.img file?
BoZ
bozinsky73 said:
Thank you very much! I'm a totaly noob on xperia firmwares
Just to be sure: is oem.img the SW_BINARIES_FOR_XPERIA_ANDROID_10.0.7.1_R1_V5A_YOSHINO.img file?
BoZ
Click to expand...
Click to collapse
yes.xz1 is yoshino
u can c here
shuang0922 said:
yes.xz1 is yoshino
u can c here
Click to expand...
Click to collapse
and that oem means this
Has anyone managed to install this customrom?
I have tried installing it but it was repeated reboots
I find it hard to do according to the instructions given by the ROM provider and has installed the latest binary .
After I installed the OEM binary I flashed the ROM and it happened
I tried another way with flash again stock ROM but in newflasherv20 an error message popped up even though before I could install stock firmware v126 pie for Sov36 and what I want to install the firmware for Globa UK v228 doesn't suit me
now I have Rom SOV36 v126 Pie which I restore from twrp. but still want to try Pixel Experience Plus 10.0
There is the right method for this flash rom
as I said already Binary Flash and Pixel flash but so reboot repeatedly
Please make a tutorial step by step via notes or video to make it easier
shuang0922 said:
oem b? xz1 is A only.just need flash one img
How to flash Pixel Experience (PE) for yoshino platform:
boot twrp, flash pe zip, reboot fastboot, flash oem, then fastboot -w and reboot
Click to expand...
Click to collapse
Thanks for the hint. Will add that to the OP.
I found a few bugs in Rom PE
Battery charging is not stable
Advance boot not working
Sometimes it becomes slow after rebooting
Bug Camera
Bug Mic
Slow reboot even stuck
And somehow my TWRP suddenly disappeared after Vol - and Power TWRP didn't show up either
While I will use LoS17.1 because after installing OEM from Sony it is more stable
This is the worst rom for Sony xz1 i have ever tried
Sent from my G8342 using Tapatalk
hany ahmed79 said:
This is the worst rom for Sony xz1 i have ever tried
Sent from my G8342 using Tapatalk
Click to expand...
Click to collapse
I agree with you. Yes maybe there is something that works. But there are a lot of bugs in this Rom that make me disappointed as a holder of the G8341 because it is labeled Stable
But on the other hand the value of the OS itself is pretty good and the kernel also works well
Only in the Lib section that must be addressed again for developers
? There are things in this Rom that make me confused why I can't enter TWRP at all and I tried to flash again TWRP got failed results.
Now back to XperiaOS ( Stock Rom )
I agree with you also don't know why they marked it as stable release.
I'm now on lineage 17.1 unofficial build but it's way better and more stable.
Sent from my G8342 using Tapatalk
---------- Post added at 05:52 PM ---------- Previous post was at 05:49 PM ----------
starvirus10 said:
I agree with you. Yes maybe there is something that works. But there are a lot of bugs in this Rom that make me disappointed as a holder of the G8341 because it is labeled Stable
But on the other hand the value of the OS itself is pretty good and the kernel also works well
Only in the Lib section that must be addressed again for developers
[emoji848] There are things in this Rom that make me confused why I can't enter TWRP at all and I tried to flash again TWRP got failed results.
Now back to XperiaOS ( Stock Rom )
Click to expand...
Click to collapse
I agree with you also don't know why they marked it as stable release.
I'm now on lineage 17.1 unofficial build but it's way better and more stable.
Sent from my G8342 using Tapatalk
SGH-i200 said:
Thanks for the hint. Will add that to the OP.
Click to expand...
Click to collapse
Hey..
Why haven't you written on 1st post that the official ones are still in beta ?.. I told you before right ?... The rom is marked stable not the build..
Do not provide incomplete information to users and ruin their expectations ... !!!
---------- Post added at 08:46 AM ---------- Previous post was at 08:43 AM ----------
starvirus10 said:
I found a few bugs in Rom PE
Battery charging is not stable
Advance boot not working
Sometimes it becomes slow after rebooting
Bug Camera
Bug Mic
Slow reboot even stuck
And somehow my TWRP suddenly disappeared after Vol - and Power TWRP didn't show up either
While I will use LoS17.1 because after installing OEM from Sony it is more stable
Click to expand...
Click to collapse
hany ahmed79 said:
This is the worst rom for Sony xz1 i have ever tried
Click to expand...
Click to collapse
starvirus10 said:
I agree with you. Yes maybe there is something that works. But there are a lot of bugs in this Rom that make me disappointed as a holder of the G8341 because it is labeled Stable
But on the other hand the value of the OS itself is pretty good and the kernel also works well
Only in the Lib section that must be addressed again for developers
? There are things in this Rom that make me confused why I can't enter TWRP at all and I tried to flash again TWRP got failed results.
Now back to XperiaOS ( Stock Rom )
Click to expand...
Click to collapse
hany ahmed79 said:
I agree with you also don't know why they marked it as stable release.
I'm now on lineage 17.1 unofficial build but it's way better and more stable.
Sent from my G8342 using Tapatalk
---------- Post added at 05:52 PM ---------- Previous post was at 05:49 PM ----------
I agree with you also don't know why they marked it as stable release.
I'm now on lineage 17.1 unofficial build but it's way better and more stable.
Click to expand...
Click to collapse
It's written in the first post...
The ROM is marked as stable ... The build for this device and yoshino platform is still under beta ..
These are beta releases
To know and discuss more join : Pixel Experience Sony Group
https://t.me/PixelExperienceSony
PS : I am not the developer for official ones