Hi,
So I just unlocked my bootloader, installed TWRP and then I installed the latest TWRP version of MIUI Pie beta.
The setup wizard has firstly asked me for my Mi account password which I provided. But then, right after it asked me if I want to restore from a Google backup, it asked me to "Confirm my password". First, I thought it's asking for my previously used lockscreen password. However, only a numeric keyboard shows up! And my lockscreen password also contained letters.
I tried to wipe data through TWRP and even flash the zip file which removes the lockscreen lock, however the issue still happens. At this point I was afraid I would not be able to use the device anymore, but luckily I went back to MIUI 10 Oreo and completed the setup successfully.
I still want to try Pie. Has anyone else had this issue?
Thanks.
Hi. I had same issue. I needed to format everything. What i did: format system then i flashed the pie rom. When that was done I formatted. Everything else including data and internal storage. This helped.
Make sure you backup your personal data because you will lose everything.
Android P has a handy little thing called Force Encryption. Once you flash it it auto encrypts to protect your data. You can find zips that turn it off or you can use a recovery that has it built in like OrangeFox.
Or it could be asking for your google account password...
Its asking for your mi account password, just upgraded to pie yesterday. Whenever upgrading disable all fingerprint and other lock screen password ,then upgrade to newer build like from oreo to pie and enable them again.
Likely you have to do in Twrp > WIPE > FORMAT DATA, back up your internal storage on pc bcoz you will lose everything
Related
I have a OnePlus 3 and I was thinking of encrypting it for additional security & privacy reasons. But since I flash various ROM level mods / use xposed modules on my phone, I was wondering about the negative consequences I have to face after encrypting an android phone.
I have a few doubts which need to be cleared.
1) Since my android phone would be encrypted, would I absolutely not be able to flash any new files/make nandroid backup from the recovery?
2) If 1) is true, which means, let's say I install an xposed module which causes a bootloop. Now I would have no way to disable all the active xposed modules from recovery since the files are encrypted, which means I would have to restore everything from scratch?
3) Is there absolutely no known way of decrypting android/access files unencrypted from recovery if we know the master PIN/password?
Can somebody who has dealt/dealing with an encrypted android phone please answer these questions? Thanks.
Deleted
Hi, thanks for your reply.
Just Passing By said:
1. When you access recovery on an encrypted phone, you have to decrypt your phone. After that, your recovery can do anything it normally could do. This would of course include flashing ROMs, zip files, and making nandroid backups.
.
Click to expand...
Click to collapse
2 things to say about that.
1)Decrypting just to flash files is a huge problem. TWRP/CWM should have a feature when it asks for the master PIN/password on the recovery, then after I enter it, it should decrypt the data on the fly and then mount the system and data partitions unencrypted so that I can flash files without going though all the decryption process.
2)Correct me if I'm wrong, but all android decryption processes I read online require wiping all data/doing a factory reset. That's again a huge problem. Why? In case I flash a mod/install a xposed module which causes a bootloop, I would have no way to decrypt my data, even if I have my master password. Which would mean I would lose all my files which I haven't backed up.
Problems like these could be avoided if TWRP provided permanent decryption/on the fly decryption using the master PIN. Comparing this with veracrypt on windows for e.g. , let's say my windows is encrypted with veracrypt and a hardware failure occurs at some point in the future & windows refuses to boot, but I'm able to load a live ISO. In this case, veracrypt offers a rescue ISO which I could use to decrypt the data without losing all my files after I enter the master PIN. So in this case, I can have security of encryption & also the convenience of decrypting it without losing all my files with the master password in case my main OS refuses to boot.
If I can't decrypt android from the recovery using the master PIN, that would mean in any case my android refuses to boot, I have lost all my files.
3. I'm assume you meant to say "... If we don't know the master PIN/Password?" And the answer to that is yes. If you can't decrypt your phone, you'll lose everything in it, so making periodic backups is a must. Otherwise, there'd be no point if you could just decrypt things right?
Click to expand...
Click to collapse
No, I did not say that wrong, sorry if I wasn't clear enough on my first post. I just wanted to know if there was a way to permanently decrypt android from recovery using the master PIN so that i would be able to recover my files to a USB in case my android refuses to boot.
Deleted
Yesterday I installed a ROM (Unofficial Resurrection Remix) thanks to EndLess and it seemed great, really very good work with the system. But when I went to restore the original rom of the phone "TWRP" asks me for an unlock pattern, after putting it and restoring the original system image, I am ready to boot the system. The system starts well, but asks me for the same pattern to start the boot. Then the loading process continues and I get to the part of setting the unlock pattern to start Android. Here's my problem, the pattern I used is the same one that I used the previous 2 times and it does not work.
Therefore I have 4 questions:
1- Is it possible to delete the encryption of the phone and leave it as it was before installing Android 8.1?
2- Is it possible to access my previous system?
3- I noticed that this room does not come with root activated, is it possible to root the ROOM?
4- If I put a new unlock pattern, will the current one be overwritten in the encryption or will the phone simply not find a way to boot and I will have a beautiful paperweight?
Thanks in advance.
Please forgive my English, it is not my native language
brito9112 said:
Yesterday I installed a ROM (Unofficial Resurrection Remix) thanks to EndLess and it seemed great, really very good work with the system. But when I went to restore the original rom of the phone "TWRP" asks me for an unlock pattern, after putting it and restoring the original system image, I am ready to boot the system. The system starts well, but asks me for the same pattern to start the boot. Then the loading process continues and I get to the part of setting the unlock pattern to start Android. Here's my problem, the pattern I used is the same one that I used the previous 2 times and it does not work.
Therefore I have 4 questions:
1- Is it possible to delete the encryption of the phone and leave it as it was before installing Android 8.1?
2- Is it possible to access my previous system?
3- I noticed that this room does not come with root activated, is it possible to root the ROOM?
4- If I put a new unlock pattern, will the current one be overwritten in the encryption or will the phone simply not find a way to boot and I will have a beautiful paperweight?
Thanks in advance.
Please forgive my English, it is not my native language
Click to expand...
Click to collapse
As it seems that you encrypted your device somehow by chance.
1. Before installing any rom you have to format your data First. That'll Remove the pattern.
2. Accessing the old system depends upon your access. If you are now encrypted then no actually.
3. Yea just flash magisk zip and the rom will be rooted.
4. Expect an out of the world paper weight.
MyNameIsRage said:
As it seems that you encrypted your device somehow by chance.
1. Before installing any rom you have to format your data First. That'll Remove the pattern.
2. Accessing the old system depends upon your access. If you are now encrypted then no actually.
3. Yea just flash magisk zip and the rom will be rooted.
4. Expect an out of the world paper weight.
Click to expand...
Click to collapse
Thanks for the quick response, would you be so kind as to explain to me what do you mean by "format your data first"?
You mean to delete all the partitions of the phone and install everything from 0 ??
How am I supposed to do that? I have a save from the previous system, I told "TWRP" to save all the partitions in my phone. If I restore that backup, will my device be decrypted?
brito9112 said:
Thanks for the quick response, would you be so kind as to explain to me what do you mean by "format your data first"?
Click to expand...
Click to collapse
Boot to TWRP, and select "Format data". You will lose all your data, plus the contents of your internal SD - but the encryption will be gone. You should back up your internal SD (either to an external SD drive, or your PC, etc) before trying any of this. I hope you have backups of your data.
DarthJabba9 said:
Boot to TWRP, and select "Format data". You will lose all your data, plus the contents of your internal SD - but the encryption will be gone. You should back up your internal SD (either to an external SD drive, or your PC, etc) before trying any of this. I hope you have backups of your data.
Click to expand...
Click to collapse
Thanks for answering, i will try your method in a few minutes, by the way, with format you mean wipe data partition, right?
brito9112 said:
Thanks for answering, i will try your method in a few minutes, by the way, with format you mean wipe data partition, right?
Click to expand...
Click to collapse
When you select "wipe" on main menu. There will we two options at bottom. One will say "Format data" and another will say "Partition" select format data. It will open a new screen saying that format data will delete all the data and Remove encryption. Type yes and continue. However backup your data before doing this. Better copy the files using mtp from recovery or system.
MyNameIsRage said:
When you select "wipe" on main menu. There will we two options at bottom. One will say "Format data" and another will say "Partition" select format data. It will open a new screen saying that format data will delete all the data and Remove encryption. Type yes and continue. However backup your data before doing this. Better copy the files using mtp from recovery or system.
Click to expand...
Click to collapse
I saw that option later, thanks to all who help, my system was recover. The only strange thing was the lock pattern. I delete from /data/system/ this 2 files, "gatekeeper.password.key" and "gatekeeper.pattern.key". Use TWRP as file manager and my phone good as new.
Maybe I didn't look well, but I didn't find an answer to my problem.
Pratically, everytime I install a pie rom, when I boot to system, it asks me for an encryption password, and every password I put, it says that it's correct but that my data is damaged and so I can't boot, it then asks me to do a data format, and even if it does it, the process just repeats itself.
I tried different roms, different TWRPs recoveries, and I also tried different Firmwares, but I can't manage to install a Android 9 rom.
Please tell me what can I do, and if my problem is already been solved, please tell me where.
you need to format internal storage.
ali7_has said:
you need to format internal storage.
Click to expand...
Click to collapse
Already did that, and the problem still remains
This issue is haunting many. It never happened with me before Pie Roms. I did format Data and it resolved the problem and system booted. But every time I flash updated rom through TWRP, this issue pops up again. I have tried every method such as removing screen lock, finger scans etc. etc. but there is no other way out than formatting data and go ahead.
Is there anything way that i can disable data encryption? Both TWRP and orange fox not allow me to install anything and asking for password, i tried both lock password and mi password but nothing. I am trying to root my phone, i also tried to make a patched boot image with magisk manager but not install button was showing up.Any solution?
Stock rom with miui global 10.3.1.0 version
tzagaritos said:
Is there anything way that i can disable data encryption? Both TWRP and orange fox not allow me to install anything and asking for password, i tried both lock password and mi password but nothing. I am trying to root my phone, i also tried to make a patched boot image with magisk manager but not install button was showing up.Any solution?
Stock rom with miui global 10.3.1.0 version
Click to expand...
Click to collapse
Don´t waste your time trying to decipher the password, they´re advanced algorithms that Android uses to make the Encryption-By-Default to protect data user not a personal password that can be easily decoded.
You can flash any zip using adb sideload through Advanced options in recovery, the problem would be trying to boot up due to AVB implementation, I never cared about format data when is needed so my important files I ever have on my external SDCard.
Some members refer that such recovery can decrypt data or not, this is not a problem by its own but the ability to boot. The simple way to decrypt data is formatting it.
As a side note decrypt data will be required just in some cases like when you unlocked for first time, when you are coming back to a Miui upgraded rom then to an AOSP one but most of custom roms based on Miui don´t have encryption like ROS, Xiaomi.eu or Mi-Globe.
SubwayChamp said:
Don´t waste your time trying to decipher the password, they´re advanced algorithms that Android uses to make the Encryption-By-Default to protect data user not a personal password that can be easily decoded.
You can flash any zip using adb sideload through Advanced options in recovery, the problem would be trying to boot up due to AVB implementation, I never cared about format data when is needed so my important files I ever have on my external SDCard.
Some members refer that such recovery can decrypt data or not, this is not a problem by its own but the ability to boot. The simple way to decrypt data is formatting it.
As a side note decrypt data will be required just in some cases like when you unlocked for first time, when you are coming back to a Miui upgraded rom then to an AOSP one but most of custom roms based on Miui don´t have encryption like ROS, Xiaomi.eu or Mi-Globe.
Click to expand...
Click to collapse
thanks a lot , i did not know that i could flash zip files in that way, you saved me thanks again
use the custom TWRP by wzsx150, decryption is working with that one https://forum.xda-developers.com/mi-8-Lite/development/mi-8-lite-twrp-t3850019
borg4571 said:
use the custom TWRP by wzsx150, decryption is working with that one https://forum.xda-developers.com/mi-8-Lite/development/mi-8-lite-twrp-t3850019
Click to expand...
Click to collapse
Is possible to send me the img file through Google drive or anything familiar;its a mess trying yo download from the Chinese site
I have Android pie
Hi guys,
I was trying to flash POSP Android 10.. it was not booting me in.
So, i went back to my backup. But now i am not able to login as its saying my decrypt password is wrong.
I am not able to login to TWRP also, as again i am facing issue, since its asking for password.
I know i have to format the data but not sure as how to do it without access to TWRP.
Cheers!!!
press the back button then you can format data
Type as password --> default_password
install DFE and try
otherwise format data (you will lose everything in your internal storage )
Did you got pattern lock active before flashing POSP, if yes try the numbers associated with each dot of your pattern as password.