I bought A used S7 edge, I have issues with 4G use on my phone, and It wont update past android version 6.
When I used SAMSUNG INFO app I found the following:
Bootloader Version: G935VVRU4API3
PDA Version :G935FXXU1BPL2
CSC Version :G935FXXU1BPL2
Baseband Version :G935VVRU4API3
CSC COUNTRY : HONG KONG
SAMSUNG SERIAL NUMBER : 00000000000
I have 4g connectivity issues especially on whats app (can only send text but can't send media), Facebook ( works for a while and then 4g stops working on it) , yahoo mail (won't refresh or open/send emails unless on wifi) , and linkden ( feed doesn't load unless on wifi), and youtube works with no issues.
This issue is killing me, how can I fix it? I live in the middle east (Jordan), does that effect anything ? I already factory reset my phone and re-installed all my programs, I got my SIM Card checked, I checked with my service provider and nothing is wrong.
Help! what can I do to fix my problem ?
Screenshot of download mode: imgurDOTCOM/a/sJEWUA1
Screenshot of about phone screen : imgurDOTCOM/a/aDlWRSc
Can you notice that it says on phone info its SM-935F but in download mode it says its Sm-935V
Hi , your SN must to show up , also when you are dial *#06# , to make sure what is correct firmware you should see on the Battery cover glass to the bottom like for example :
SM-G935V ( see if is V , F or some other )
Made in Vietnam by Samsung
S/N RFxxxxxx
IMEI: 357090/07/3957276 ( compare your imei with imei which is written on the battery cover ....
Once you find real model name go to updato.com , put your device model and download latest firmware for your region.
You can use IDM for fast downloading , also you need Odin . you have over the internet how to use Odin and how to flash ....
But , before you are doing anything back up your data , also remove your google account and samsung account from your device , make sure your battery is full , do Wipe Cache Partition from Recovery and do Factory Reset . Then flash latest firmware with Odin .
Good Luck
Teddy Lo said:
Hi , your SN must to show up , also when you are dial *#06# , to make sure what is correct firmware you should see on the Battery cover glass to the bottom like for example :
SM-G935V ( see if is V , F or some other )
Made in Vietnam by Samsung
S/N RFxxxxxx
IMEI: 357090/07/3957276 ( compare your imei with imei which is written on the battery cover ....
Once you find real model name go to updato.com , put your device model and download latest firmware for your region.
You can use IDM for fast downloading , also you need Odin . you have over the internet how to use Odin and how to flash ....
But , before you are doing anything back up your data , also remove your google account and samsung account from your device , make sure your battery is full , do Wipe Cache Partition from Recovery and do Factory Reset . Then flash latest firmware with Odin .
Good Luck
Click to expand...
Click to collapse
Well the battery cover (Back cover) has been replaced with another one so I can't get anything off it, on the download mode it says its a G935V, but the software installed on it is G935F as you can see from my (Settings- About phone ) screen shot....
I don't think If I flash the G935V firmware it'll work because I am not in the USA and There is no Verizon here, I live In Jordan (middle east)
Can I flash the G935U software? will that solve my whole issue? do I flash the whole thing ?
anyone could help out ?
Your phone is for sure somehow "modded" device registred on database with your imei is registred as G935P made for USA not G935F or G935V . Who knows what the owner before you has done with him or somebody else .
So my suggestion is to flash firmware for G935P
https://updato.com/firmware-archive-select-model?q=G935P&exact=1&r=&v=&rpp=15
Choose region USA (Sprint) SPR or XAS use latest Android 8 with latest Odin version or try last Android 7 .
Related
Hi all,
I need help regarding connection problem of my I9300.
I updated my SGSIII through kies from LE8 to LH1 ( Using Firmware initialization, as Kies was giving message that it cannot update this phone)
But after update i have no network connection at all. There aren't any insert sim warnings anywhere, i just have a circle with a diagonal line through it in the notification bar where the signal bars usually sit.
If i hold the power button to bring up the shut down/flight mode menu,I can turn on flight mode but after getting in flight mode this option is diasabled. And i cannot turn off flight mode from power menu.
I can disable it from settings, but that option also disables and only enables if i exit from that menu and enter again.
I have re installed .LE8 via Odin but it is same.
My phone is unlocked and i can see carrier name in status bar.
Also it does not search any available networks from menu.
Any one knows what is wrong
Verify your imei, *#06#
Sent from my GT-I9300 using xda premium
Dialer type *#1234#
Are modem and CSC correct for your area .
Have you set up the network manually is the network registered in the APN list .
Have you tried a factory reset after backing up all data ??
But this reads more like a failed flash .
jje
Rivafe said:
Verify your imei, *#06#
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I have verified, My imei number is correctly displayed.
JJEgan said:
Dialer type *#1234#
Are modem and CSC correct for your area .
Have you set up the network manually is the network registered in the APN list .
Have you tried a factory reset after backing up all data ??
But this reads more like a failed flash .
jje
Click to expand...
Click to collapse
My signals were fine with OXA LE8. I upgarded to LG8.
Now i have reflashed same firmware but it did bot work.
MY APN is automatically configured from sim,
But when i got to network operators --> Search networks, Searching flashes for a second and goes off.
When i choose Network operators --> Select automatically it says registered to network immediately
Also power menu keeps telling that flight mode is ON even if i turn it off from setting. and this option in power menu is also disabled unless i reboot. After switching to Flight mode first time from menu it is disabled.
I did factory reset but it did not help
If it is a failed flash, what should i do?
I have noticed one more thing,
If i remove sim card, I get no sim card symbol. But i get full signal bars on status bar.
In settings--> Status it shows signal strength of 71 dbm 21 asu
Also without sim card the flightmode can be enabled or disabled normally
with flight mode disabled the signal strength is 70-80 dbm, with flight mode enabled signals go to 111 dbm
I have the same error!
Exacly equal on everything you said!
Only diference is, my IMEI was changed by 004999xxxxxx.
And I don't know why!
I've done all facilities to follow many tutorials here, but nothing worked.
I have just noticed that in status menu, serial number is 00000000000.
Is it normal or i have some corruption in EFS folder.
fael9001 said:
I have the same error!
Exacly equal on everything you said!
Only diference is, my IMEI was changed by 004999xxxxxx.
And I don't know why!
I've done all facilities to follow many tutorials here, but nothing worked.
Click to expand...
Click to collapse
I think you can resolve your issue by restoring efs data
I have checked my efs folder.
following two files are modified at the time when i installed the LH1 firmware.
1- nv_data.bin
2- nv_data.bin,md5
allother files are old.
I think it has some problem. I have .bak files of both files.
How can i restore them.
Do you have EFS backup? If yes, did you try to restore it?
Sent from my GT-I9300 using xda app-developers app
-A-P-M- said:
Do you have EFS backup? If yes, did you try to restore it?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I haven't.
I'll try do make this for restore my IMEI number: http://forum.xda-developers.com/showthread.php?t=1801997
but, I'm not sure if works in GT-I9300 by Vodafone... I'm searching.. and not found yet... and I can't make questions..I'm new here..=/
fael9001 said:
I haven't.
I'll try do make this for restore my IMEI number: http://forum.xda-developers.com/showthread.php?t=1801997
but, I'm not sure if works in GT-I9300 by Vodafone... I'm searching.. and not found yet... and I can't make questions..I'm new here..=/
Click to expand...
Click to collapse
My friend had the same problem when he tried to initiate the firmware via Kies (as it was not his region update, which we believe is the cause of the problem)
He solved it by downloading the latest official firmware of his region using checkfus-PC version after wiping all data and cache and it worked well bringing his device back to the latest official firmware and reseting modem/csc
For Egypt, I believe the latest official firmware is BLFB. Download PC version of check fus and use it to verify :good:
DevilDuck81 said:
My friend had the same problem when he tried to initiate the firmware via Kies (as it was not his region update, which we believe is the cause of the problem)
He solved it by downloading the latest official firmware of his region using checkfus-PC version after wiping all data and cache and it worked well bringing his device back to the latest official firmware and reseting modem/csc
For Egypt, I believe the latest official firmware is BLFB. Download PC version of check fus and use it to verify :good:
Click to expand...
Click to collapse
This sounds like good.
Have you a tuto how use this checkfus-PC? And download official firmware from sammobile.com?
I'm from Brazil, I bought this phone on Ireland...totaly different region.. I installed Ireland's room with ODIN.
Already, many thanks for your attention.
fael9001 said:
This sounds like good.
Have you a tuto how use this checkfus-PC? And download official firmware from sammobile.com?
I'm from Brazil, I bought this phone on Ireland...totaly different region.. I installed Ireland's room with ODIN.
Already, many thanks for your attention.
Click to expand...
Click to collapse
I dont have a Tuto for you..but once you open Checkfus..the steps are quite easy..enter your model number..your region and download the firmware..similarly you can do the same on Sammobile.com...you will need to register first...once you have the zip file..unzip it to find the .tar file..take your phone into download mode.connect to pc with odin open...choose the .tar file as pda uncheck re-partition if it is checked...and flash..
-A-P-M- said:
Do you have EFS backup? If yes, did you try to restore it?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
DevilDuck81 said:
My friend had the same problem when he tried to initiate the firmware via Kies (as it was not his region update, which we believe is the cause of the problem)
He solved it by downloading the latest official firmware of his region using checkfus-PC version after wiping all data and cache and it worked well bringing his device back to the latest official firmware and reseting modem/csc
For Egypt, I believe the latest official firmware is BLFB. Download PC version of check fus and use it to verify :good:
Click to expand...
Click to collapse
Am i supposed to download the firware for my country and reflash it.
My phone orignal firmware is BTU ( UK ) according to Kies when i use Kies firmware initiaization, but i am in PAK.
Is this the cause of problem
My CSC when it checked before upgrading was LE8 (XXX)
when using *#197328640# (Service Mode)
version info---> sw version-->read csc code it says does not support
read all sw versio ---> no thing against csc code
read imei ---> not supported
But*#06# returns imei
*#1234# returns all information
I am confused. is it normal
Is there a way to check the orignal CSC as i might have some csc conflict that is not allowing me to use sim card
I have checked my nv_data.bin
I found that it has ÿÿÿÿÿI9300XXLE8............. written in it. is it ok for UK (BTU) firmware.
But Odin does not show my CSC it says that i have LE8 ( XXX ).
Using *2767*4387264636#. code to check product number is also not working in my phone. It does nothing.
In service menu when i check sellout sms-->get scm info
1- sellout sms : off
Pcode : not active
Mode : prod
Any progress?
After flashing official LE8 and fox hound LH4, i think it is not rom related issue.
Some people think that it may be CSC or product code problem, But in my SGS2 i flashed every rom with many different CSC and regions but i never had this issue.
I am currently working on EFS folder because all my symptoms are same as if EFS folder is corrupt, but i just want to be sure because i can see imei, mac addresses and SW info.
muhammad.ali123 said:
After flashing official LE8 and fox hound LH4, i think it is not rom related issue.
Some people think that it may be CSC or product code problem, But in my SGS2 i flashed every rom with many different CSC and regions but i never had this issue.
I am currently working on EFS folder because all my symptoms are same as if EFS folder is corrupt, but i just want to be sure because i can see imei, mac addresses and SW info.
Click to expand...
Click to collapse
The problem is how restore this EFS folder, or edit.. I don't know,
find the solution?
hi everyone... this is my first time posting anywhere... i have a samsung galaxy S2 gt-i9100 ... i am having an issue which noone else seems to have... please read what i am trying to say... i bought this mobile brand new, factory unlocked and now my warrenty is long gone.... i have never dropped it or wet issues.... now to tell the truth i did install an official firmware xxlp7 4.0.3 in may 2012... i live in pakistan and this firmware was for uk region... i used odin to flash it... the mobile worked fine till 5th october 2012... on this date i got a message that there is a software update... this was for 4.0.4... i went ahead and installed it.... after installing the mobile restarted and the mobile worked for only 1-2 mins showing me signals and then it happened.... NO SIM... cannot txt or call... it says not registered on network... even cant get a dial tone if i call emergency... from dat day till now i cant make my s2 catch signals.... i tried the battery takeout, factory reset, hard reset, wipe data from recovery mode, using different sims, cleaning sim contacts, all sims work on other mobiles and have perfect reception. the following is what ive tried,
1. flashing new firmwares using odin. (have tried my stock firmware and almost 15 firmwares)
2. flashing insecure kernels using odin to root my mobile.
3. using GS2_Repair from market
4. using efs_pro software.
5. using different modems or phones via odin.
now there is more to it please read,
when ever i open status it shows the following,
Network = Unknown
Signal strength = -69 dBm 22asu (changes a lot but remains in 65 to 75)
Mobile network type = GPRS:1
Service State = Out of service
Roaming = not roaming
Mobile Network state = Disconnected
My phone Number = Unkknown
IMEI = 359****************** which is totally correct
IMEI SV = 01
wifi, bluetooth, ip address everything works just fine.
In about phone
ANDROID VERSION; 4.0.3
BASEBAND VERSION: I9100XXLPS
KERNEL VERSION: 3.0.15-I9100XWLP7-CL340913 [email protected] #3
BUILD NUMBER: IM74K.XWLP7
PLEASE NOTE THAT MY IMEI NUMBER IS JUST FINE AND WHEN I TRY THE SECRET CODES FOR LOCK CHECK CODES IT IS ALL OFF,.....
IVE READ THOUSANDS OF FORUMS EITHER THEY DONT HAVE BASEBAND OR IMIE BUT NOONE HAD MY PROBLEM.... AND FINALLY AFTER READING DAY AND NIGHT I THOUGHT OF WRITING A FORUM MYSELF...
SOME SAY MY EFS ARE CORRUPT, SOME SAY ITS THE .NAV FILES, SOME SAY ITS THE CSC FILES, SOME SAY ITS HARDWARE.... I CANT TAKE IT TO THE SAMSUNG CENTER AS I HAVE NO WARRENTY.... I NEED SOME EXPERTS TO ENLIGHTEN ME ON THIS PROBLEM.... THANKYOU.... LOOKING FORWARD FOR UR CONTRIBUTIONS....
Do you was plug in charger ?
Send form Galaxy S2. Using XDA Premium
May be a harware problem? Flash original firmware and send it repair?
JUST one golden tip for u........
go to shop in lahore LINKS INTERNATIONAL haFEEZ CENTRE n get ur efs repaired for 2 to 3k........
Thanks for the replies...
@Paulius, yes it was plugged in....
@Yary, i cant coz have no warrenty...
@Saad iqbal will do dat... i went to 2-3 shops and they said we want dead approval... they also added that its better dat u use it dat way coz the chances are 10% it will work and 90% dat it will be bricked... and i would rather have something den nothing.... i will go to dat shop and see what they have to say...
Hey Guys;
A month ago my phone died on me. After a 1 month hassle of the company trying to dodge doing repair the phone on the warranty, they finally gave up.
They replaced the motherboard and when I got it, it gave me zero bars and no network. I took it back and they returned back with a different rom but it was working. The first was some samsung s3 in arabic version rom. The second was a chinese samsung s3 rom. Since I couldn't get arabic keyboard I decided to flash super nexus rom but now I have zero bars and no network showing.
The hardware specs are in the attachments.
Any idea how to fix it?
Stock reply
IMEI correct
Modem correct
CSC correct ??
See multiple identical posts .
jje
Imei: unknown
Imei sv: unknown
Baseband: unknown
Can't find PDA, CSC and modem?
Looking at different posts. Tried Ariza patch didn't work. Am assuming I only need to set the imei to get a network. But what am I to set it to?
sub-80 said:
Imei: unknown
Imei sv: unknown
Baseband: unknown
Can't find PDA, CSC and modem?
Looking at different posts. Tried Ariza patch didn't work. Am assuming I only need to set the imei to get a network. But what am I to set it to?
Click to expand...
Click to collapse
You cannot set an IMEI .
You either have a backed up EFS folder you can restore or its a service center repair .
Can't find PDA, CSC and modem? either you are clueless or its more than just IMEI is a problem .
Suggest you flash a stock rom for your area via odin from sammobile.com .
Fails then its a service centre .
jje
JJEgan said:
You cannot set an IMEI .
You either have a backed up EFS folder you can restore or its a service center repair .
Can't find PDA, CSC and modem? either you are clueless or its more than just IMEI is a problem .
Suggest you flash a stock rom for your area via odin from sammobile.com .
Fails then its a service centre .
jje
Click to expand...
Click to collapse
I am a bit clueless, nut when I had the S3 before it died and had its motherboard replaced. I would press *#1234# to get the pda and modem and csc or you can get them in the about area. But now with the super nexus rom if i press the code it gives " no mobile network" and it does not show in the about area.
I didn't back up the EFS. This problem was present as I said before when I got it back from the in the service center they had a rooted middle east stock rom and it showed no service, they took it back, I thought the reason was loose wiring. And when I got it back it had a rooted Chinese stock rom which was able to connect to the network. The previous Original motherboard had an unrooted African stock rom, they also cheated me by giving me a 16gb motherboard instead of 32gb.
Tried to flash chinese stock rom via odin and got fail. now it will only go to download mode anything less it gives a yellow triangle.
You need a service centre but you have no warranty .
jje
Got it fixed. :laugh:
First Flashed Samsung i9300 stock rom 4.0.4 from http://samsung-s3.com/restoring-sto...ware-build-xxalf2-samsung-galaxy-s3-gt-i9300/ (I had 4.0.4 when I bought the phone.)
root the device via Framaroot 1.4.1. apk (http://forum.xda-developers.com/showthread.php?t=2130276)
Installed busybox via busyboxinstaller.apk in google play and installed busybox
last installed ARIZAPatch.apk can be found in xda developers forum and make sure you are connected to the wifi and press the V[0,5] button. Your device will reboot and there will be light.
Hello, I changed my rom several times with Odin, and now I can't get 3G signal, just "G", not even an Edge "E".. I tried a lot of roms after that, roms from sammobile for my mobile operator, any tips to solve that?
Thanks!
#Edit
For some reason, after I installed a deodex room (gt-s5830c_zta_vjlb3-deodex_rb) my 3G started to work again.. but if I just change the PDA, it stop.. Wasn't supposed to PHONE be the file which make the 3G work or not? This VJLB3 is an old version of my operator, when I got the newest version the 3G did not work.. fml
Isnaiter said:
Hello, I changed my rom several times with Odin, and now I can't get 3G signal, just "G", not even an Edge "E".. I tried a lot of roms after that, roms from sammobile for my mobile operator, any tips to solve that?
Thanks!
#Edit
For some reason, after I installed a deodex room (gt-s5830c_zta_vjlb3-deodex_rb) my 3G started to work again.. but if I just change the PDA, it stop.. Wasn't supposed to PHONE be the file which make the 3G work or not? This VJLB3 is an old version of my operator, when I got the newest version the 3G did not work.. fml
Click to expand...
Click to collapse
Are you absolutely positive that your 3g was not related to service operator when you were on the stock firmware in question ? Have you tried your SIM card on other phones to confirm the functionality of 3g network ?
Did you check you APN settings :
Dial "*#*#4636#*#*" > Phone Information >Set preferred network type > WCDMA preferred Does it set correctly ?IF not then choose wcdma; press turn off radio then press turn on radio; press home button(not back button). You will get 3g. If not then reboot.
Have you lost your IMEI ? what you see when you dial "*#06#" was it gone on your last non - deodex fw ? what is your phone variation ?
what was your last CSC/PDA/MODEM part , which does support your base band/3g and other things , before you lost it ?
Your country / Region and carrier you are staying too please ,, we might need to flash the only Modem part over Odin to resolve this issue according to instruction i will provide . However you need to be more specific by providing more details such as name of possible custom Roms you did flash. stock CSC/PDA/MODEM details you did try and other minor details will become valuable in this troubleshooting .
ehsanotaku said:
Are you absolutely positive that your 3g was not related to service operator when you were on the stock firmware in question ? Have you tried your SIM card on other phones to confirm the functionality of 3g network ?
Did you check you APN settings :
Dial "*#*#4636#*#*" > Phone Information >Set preferred network type > WCDMA preferred Does it set correctly ?IF not then choose wcdma; press turn off radio then press turn on radio; press home button(not back button). You will get 3g. If not then reboot.
Have you lost your IMEI ? what you see when you dial "*#06#" was it gone on your last non - deodex fw ? what is your phone variation ?
what was your last CSC/PDA/MODEM part , which does support your base band/3g and other things , before you lost it ?
Your country / Region and carrier you are staying too please ,, we might need to flash the only Modem part over Odin to resolve this issue according to instruction i will provide . However you need to be more specific by providing more details such as name of possible custom Roms you did flash. stock CSC/PDA/MODEM details you did try and other minor details will become valuable in this troubleshooting .
Click to expand...
Click to collapse
Hello, thanks for the answer, the same SIM card worked on with 3g with the deodex rom, and wasn't working before it. I got no 3g with one rom, changed it to deodex and got 3g, changed again and lost, all of this in a few minutes, so wasn't problem with the operator or SIM. I didn't check the APN, I just downloaded an app from my country to try to set it. I don't know if I did lost my IMEI, I have it wrote in the back of phone, but didn't check if is the same after all that changes (and if is possible to change it), I changed the rom a LOT of times, first times with CWM and after with Odin, with the I variation, C and M (trying to go back to original stock). I think the original firmware was an old version of M variation (S5830MUWHKL4 maybe), my country is Brazil and the operator of the SIM card is Claro, the last stock from sammobile I tried was the last one from Claro, tried with and without CSC after splitfus2 it.
Isnaiter said:
Hello, thanks for the answer, the same SIM card worked on with 3g with the deodex rom, and wasn't working before it. I got no 3g with one rom, changed it to deodex and got 3g, changed again and lost, all of this in a few minutes, so wasn't problem with the operator or SIM. I didn't check the APN, I just downloaded an app from my country to try to set it. I don't know if I did lost my IMEI, I have it wrote in the back of phone, but didn't check if is the same after all that changes (and if is possible to change it), I changed the rom a LOT of times, first times with CWM and after with Odin, with the I variation, C and M (trying to go back to original stock). I think the original firmware was an old version of M variation (S5830MUWHKL4 maybe), my country is Brazil and the operator of the SIM card is Claro, the last stock from sammobile I tried was the last one from Claro, tried with and without CSC after splitfus2 it.
Click to expand...
Click to collapse
I really don't understand how Deodex Rom has anything to do with your 3g/IMEI/APN settings. Because Deodexing is basically repackaging of your APKs in a certain way, such that they are reassembled into classes.dex files.
By doing that, all pieces of an application package are put together back in one place, thus eliminating the worry of a modified APK conflicting with some separate odexed parts.
custom ROMs or APKs are always deodexed to ensure integrity.
Ok so you are from Brazil (Claro) and on C variation of the device, thus splitfus2 and wipe package troubleshooting is not supported for C variation . (Splitfus2 only generates the normal extraction of CSC/MODEM/PDA parts from your single xxx.tar.md5 file, noting more in this case ). Use this pre- configured app for normal parts generation instead with ease .
This is the list of the correct xxx.tar.md5 for your device and you have tried the last update for your carrier from this page ( PDA : S5830CVJMA1/CSC: S5830CZTAMA1 )according to you , right ? and you lost your 3g support ?
I got couple of suggestion for your 3g :
1- Use 2012 tested Brazilian Multi Package Firmware from this page ( PDA: VJLF3/CSC: ZTOLF1/VJLF2) .
2. Check you got the correct Odin and drivers installed on your system ( Odin3.v3.07.Cooperve.exe ; Drivers post ) .
3- Get into Download mode ( pressing Vol(+) + Vol(-) + Power Keys) :
- -press volume up
-Open Odin3.v3.07.Cooperve.exe
-Connect your phone to PC via USB cable.
-Make sure that your phone is detected in "ID:COM" area.
- Put your CSC/MODEM/PDA parts into their respective places . Do not use pit file and Do not tick re-partition though . Factory reset and reboot selected by default >> push the START !
- DO NOT disconnected nor disturb the flashing Nand process , until the process being terminated.
Get into e3 stock recovery and wipe your /data .
Now in your brand new FW :
Dial "*#*#4636#*#*" > Phone Information >Set preferred network type > WCDMA preferred /only and confirmed my instruction in first post has met with your APN settings.
Dial *#06# as instructed in first post ( IMEI box with your 15 diigit number must appear )
CSC is your consumer software customization and it is specified to geographical region and carriers. CSC contains the contains the software packages specific to that region, carrier branding and also APN settings for data connection .
WE can easily change the settings inside our Multi - package we flashed for carrier compatibility etc etc :
Code:
Just type *#272*Device IMEI# at Phone dial pad. For IMEI type *#06#.
Select the CSC that you want.
Click Install.
Phone will be rebooted by itself.
Note –Changing this will factory reset your phone. Do backup before perform this task.
Note – CSC can sometime be corrupt. It may lead to infinite loop. Reason unknown.
report your progress please for future reference ,, Thank you for reading this mate ,,,,,,,,,,,
ehsanotaku said:
I really don't understand how Deodex Rom has anything to do with your 3g/IMEI/APN settings. Because Deodexing is basically repackaging of your APKs in a certain way, such that they are reassembled into classes.dex files.
By doing that, all pieces of an application package are put together back in one place, thus eliminating the worry of a modified APK conflicting with some separate odexed parts.
custom ROMs or APKs are always deodexed to ensure integrity.
Ok so you are from Brazil (Claro) and on C variation of the device, thus splitfus2 and wipe package troubleshooting is not supported for C variation . (Splitfus2 only generates the normal extraction of CSC/MODEM/PDA parts from your single xxx.tar.md5 file, noting more in this case ). Use this pre- configured app for normal parts generation instead with ease .
This is the list of the correct xxx.tar.md5 for your device and you have tried the last update for your carrier from this page ( PDA : S5830CVJMA1/CSC: S5830CZTAMA1 )according to you , right ? and you lost your 3g support ?
I got couple of suggestion for your 3g :
1- Use 2012 tested Brazilian Multi Package Firmware from this page ( PDA: VJLF3/CSC: ZTOLF1/VJLF2) .
2. Check you got the correct Odin and drivers installed on your system ( Odin3.v3.07.Cooperve.exe ; Drivers post ) .
3- Get into Download mode ( pressing Vol(+) + Vol(-) + Power Keys) :
- -press volume up
-Open Odin3.v3.07.Cooperve.exe
-Connect your phone to PC via USB cable.
-Make sure that your phone is detected in "ID:COM" area.
- Put your CSC/MODEM/PDA parts into their respective places . Do not use pit file and Do not tick re-partition though . Factory reset and reboot selected by default >> push the START !
- DO NOT disconnected nor disturb the flashing Nand process , until the process being terminated.
Get into e3 stock recovery and wipe your /data .
Now in your brand new FW :
Dial "*#*#4636#*#*" > Phone Information >Set preferred network type > WCDMA preferred /only and confirmed my instruction in first post has met with your APN settings.
Dial *#06# as instructed in first post ( IMEI box with your 15 diigit number must appear )
CSC is your consumer software customization and it is specified to geographical region and carriers. CSC contains the contains the software packages specific to that region, carrier branding and also APN settings for data connection .
WE can easily change the settings inside our Multi - package we flashed for carrier compatibility etc etc :
Code:
Just type *#272*Device IMEI# at Phone dial pad. For IMEI type *#06#.
Select the CSC that you want.
Click Install.
Phone will be rebooted by itself.
Note –Changing this will factory reset your phone. Do backup before perform this task.
Note – CSC can sometime be corrupt. It may lead to infinite loop. Reason unknown.
report your progress please for future reference ,, Thank you for reading this mate ,,,,,,,,,,,
Click to expand...
Click to collapse
Me too, I don't know why the heck just the deodex rom got 3g signal, I flashed the same PDA version, but no deodex, and there was no 3g..
Originally my Ace is an M variation, I bought it unlocked on the internet and came a 5830M, probably with S5830MUWHKL4 rom.
Yes, I got that rom from that page and used the splitfus2 on it. I'm waiting my dad get back from work (I'm trying to do the best fix on the phone so he can use it without problems) to start trying again to put the last rom with your instructions. Also, do I really need to flash CSC? This part comes with a lot of trash apps that is impossible to remove by normal ways, and I don't want to root the phone and use 3rd party programs do remove that things.
Thanks!
#Edit
Also, the PDA from deodex rom has 431mb and the PDA of nondeodex has 185mb (same version of rom), is it normal?
Isnaiter said:
Also, do I really need to flash CSC? This part comes with a lot of trash apps that is impossible to remove by normal ways, and I don't want to root the phone and use 3rd party programs do remove that things.
#Edit
Also, the PDA from deodex rom has 431mb and the PDA of nondeodex has 185mb (same version of rom), is it normal?
Click to expand...
Click to collapse
Yes you need your CSC as i have explained it in details ,,,and you have too get root privileges for any removal of your system apk's ( If you are under some sort of warranty , you can use UN-root script or galaxy toolbox to reset the counter to zero for avoiding detection i guess,after you have done playing around with phone ,, rooting and using either manual or script method is recommended for bloatware removals on Odex roms , third party apps like disable service and TB is also advised ). Or Deodexed your Rom and remove bloatwares , but you will loose ~70 MB of your precious internal storage ( link2sd or Universal Cronmod could fix the storage problems ) and PDA size you did mention is quite natural .
Still waiting for your final report mate ,,,,,,,
hello dear friends
3 weeks ago i purchased a second hand S6 edge 925F from somebody (wish i never did!!!!)
it was ok until i went to roads and area a little far from tower, always my dBu is weak and no service
my big problem is when i put my IMEI from backside of phone to some website like imei.info it says your mobile is S6 920T !!!!
how i can find my original rom, because some software expert told me i can fix your antenna issue by fixing and flashing rom
liliko said:
hello dear friends
3 weeks ago i purchased a second hand S6 edge 925F from somebody (wish i never did!!!!)
it was ok until i went to roads and area a little far from tower, always my dBu is weak and no service
my big problem is when i put my IMEI from backside of phone to some website like imei.info it says your mobile is S6 920T !!!!
how i can find my original rom, because some software expert told me i can fix your antenna issue by fixing and flashing rom
Click to expand...
Click to collapse
It's says on the back of the phone? Best way to check is boot into recovery mode... vol up + home + power it displays the phone model at the top of on Stock recovery.
G920T is s6 flat model so it's definitely not that
callumbr1 said:
It's says on the back of the phone? Best way to check is boot into recovery mode... vol up + home + power it displays the phone model at the top of on Stock recovery.
G920T is s6 flat model so it's definitely not that
Click to expand...
Click to collapse
I tried in dowloading mode and it is SM-G925F also other items are custom, how i can find out which bulid number is ok for my phone because any rom i flash i face with drm verify failing problem
liliko said:
I tried in dowloading mode and it is SM-G925F also other items are custom, how i can find out which bulid number is ok for my phone because any rom i flash i face with drm verify failing problem
Click to expand...
Click to collapse
Dm verity fail is a problem with IMEI. Is the phone unlocked?
What region are you? What android version?
callumbr1 said:
Dm verity fail is a problem with IMEI. Is the phone unlocked?
What region are you? What android version?
Click to expand...
Click to collapse
My problem since started i have very poor signal ( reception) so i went to a hardware expert and he told me your board has been reflashed!!!! Then a software expert told me i can fix your issue by software issue
My android version is 6.0.1 and my kernel is spacex because after two time new rom flashing it failed at drm verify
I live at iraq and i think mobile seller bring it from EU
P.S: i think i have gsm problem because i have good signal in downtown but very poor at road and sometime no service.
liliko said:
My problem since started i have very poor signal ( reception) so i went to a hardware expert and he told me your board has been reflashed!!!! Then a software expert told me i can fix your issue by software issue
My android version is 6.0.1 and my kernel is spacex because after two time new rom flashing it failed at drm verify
I live at iraq and i think mobile seller bring it from EU
P.S: i think i have gsm problem because i have good signal in downtown but very poor at road and sometime no service.
Click to expand...
Click to collapse
Have you tried to reset network settings?
Maybe it's just the area has poor signal and nothing wrong with the phone.
If you want to flash a firmware try the UK BTU firmware it's a good one and solves most issues
callumbr1 said:
Have you tried to reset network settings?
Maybe it's just the area has poor signal and nothing wrong with the phone.
If you want to flash a firmware try the UK BTU firmware it's a good one and solves most issues
Click to expand...
Click to collapse
Yes i did and thnx i just need a rom that when i flash it after that dont face with drm because drm comes with device root kernel wrong file however maybe my phone is not 925f
As i told you imei.info says your phone is 920t is there any risk of break if i flash this model rom to my phone, blieve i have just piece of rubish in my hand cause it is just for wifi using
liliko said:
Yes i did and thnx i just need a rom that when i flash it after that dont face with drm because drm comes with device root kernel wrong file however maybe my phone is not 925f
As i told you imei.info says your phone is 920t is there any risk of break if i flash this model rom to my phone, blieve i have just piece of rubish in my hand cause it is just for wifi using
Click to expand...
Click to collapse
You can't flash G920T rom to your phone because that is for s6 flat model. You have s6 edge which is G925F.
http://www.sammobile.com/firmwares/download/90724/G925FXXU4DPGW_G925FBTU4DPH1_BTU/
Download and flash this
callumbr1 said:
You can't flash G920T rom to your phone because that is for s6 flat model. You have s6 edge which is G925F.
http://www.sammobile.com/firmwares/download/90724/G925FXXU4DPGW_G925FBTU4DPH1_BTU/
Download and flash this
Click to expand...
Click to collapse
I have very low speed internet i will download this BTU rom and reply tomorrow thnx bro
liliko said:
I have very low speed internet i will download this BTU rom and reply tomorrow thnx bro
Click to expand...
Click to collapse
Keep me updated
You could also use the smart switch emergency software recovery/device initialisation to recover it to stock if the btu wont load, if it doesn't show up in emergency recovery you will have to enter the model and your serial number in the device initialisation tab, even then it may download but not flash the phone, I had to use Odin in the end after quickly dragging and dropping the downloaded md5.tar into another directory before it removed it when the recovery failed.
I got a second hand one too, seems like the origin of it is Switzerland and was on swiss firmware so flashed it to btu, still having 3/4g issues though, just goes to emergency calls only as soon as I switch it on, 2g is all fine.