Related
Hey guys,
Recently I have not been able to connect my phone to PC. I've tried hard resetting, as well as loading the phone in "upgrade" mode (power+camera+reset) and in both cases the PC did not recognise the phone...
it says "unknown device found" when in "upgrade" mode and says nothing while connected while in windows.
Any ideas guys? I have a micro usb card, but not an adaptor so i'm clueless right now I've tried the phone on different PC's so its not the computer either.
Uss_Defiant said:
Hey guys,
Recently I have not been able to connect my phone to PC. I've tried hard resetting, as well as loading the phone in "upgrade" mode (power+camera+reset) and in both cases the PC did not recognise the phone...
it says "unknown device found" when in "upgrade" mode and says nothing while connected while in windows.
Any ideas guys? I have a micro usb card, but not an adaptor so i'm clueless right now I've tried the phone on different PC's so its not the computer either.
Click to expand...
Click to collapse
Bad USB port on the phone or possible a bad cable. Did you swap cables too?
Uss_Defiant said:
Hey guys,
Recently I have not been able to connect my phone to PC. I've tried hard resetting, as well as loading the phone in "upgrade" mode (power+camera+reset) and in both cases the PC did not recognise the phone...
it says "unknown device found" when in "upgrade" mode and says nothing while connected while in windows.
Any ideas guys? I have a micro usb card, but not an adaptor so i'm clueless right now I've tried the phone on different PC's so its not the computer either.
Click to expand...
Click to collapse
i have this issue randomly too. i find that by switching 'Enable Advanced network functionality' off or on (opposite of whichever setting it was when i had the issue) that the phone connects with no problem. i'm actually having a problem as we speak connecting to SOTI Pocket Controller, and i turned off the advanced network functionality and now it is working fine. Settings --> Connections --> USB to PC.
kflipproductions said:
i have this issue randomly too. i find that by switching 'Enable Advanced network functionality' off or on (opposite of whichever setting it was when i had the issue) that the phone connects with no problem. i'm actually having a problem as we speak connecting to SOTI Pocket Controller, and i turned off the advanced network functionality and now it is working fine. Settings --> Connections --> USB to PC.
Click to expand...
Click to collapse
Right but that wont affect Bootloader mode. He said he has the problem in bootloader. That I think is a bad cable or bad port.
scrosler said:
Right but that wont affect Bootloader mode. He said he has the problem in bootloader. That I think is a bad cable or bad port.
Click to expand...
Click to collapse
I've tried the phone in a different port and different computer, no luck. I dont have another cable but i'd be willing to get one. Would it be worth it for me to try to reinstall the ROM on the phone along with the radio?
Uss_Defiant said:
I've tried the phone in a different port and different computer, no luck. I dont have another cable but i'd be willing to get one. Would it be worth it for me to try to reinstall the ROM on the phone along with the radio?
Click to expand...
Click to collapse
No, I meant the port on the phone. The mini USB port. I had that go bad on me once. From me picking up the phone by the cable when I was tethering to desktop PC. Yeah, I dont do that any more.
Do you know anyone else with the same phone? if so have them try it on your rig with your cable. That will tell you right away if its the phone or not. Cant think of anything else to try without a control device.
scrosler said:
No, I meant the port on the phone. The mini USB port. I had that go bad on me once. From me picking up the phone by the cable when I was tethering to desktop PC. Yeah, I dont do that any more.
Do you know anyone else with the same phone? if so have them try it on your rig with your cable. That will tell you right away if its the phone or not. Cant think of anything else to try without a control device.
Click to expand...
Click to collapse
So I picked up another USB cable and still no luck... I also flashed the phone to the stock rom, and no luck again. I think you're right about when you said it was a hardware issue.
Here's another question though... would it be worth it returning the phone now, and getting another phone of the same model, or could I just use Bluetooth for active sync, return the phone in 9 months, and hope they'll give me a better model.
Uss_Defiant said:
So I picked up another USB cable and still no luck... I also flashed the phone to the stock rom, and no luck again. I think you're right about when you said it was a hardware issue.
Here's another question though... would it be worth it returning the phone now, and getting another phone of the same model, or could I just use Bluetooth for active sync, return the phone in 9 months, and hope they'll give me a better model.
Click to expand...
Click to collapse
Its always a roll of the dice on that.....if they still have Moguls in stock in 9 months, which I believe they will.....chances are slim for an upgrade.....but you never know...
I get the message when i connect the x10 to the pc "usb device not recognized" i´ve tryed other cables and uninstalling the drivers and reinstalling them. Even anoher pc. but i get the same message where ever i try.
Is it possible that some of the pins are broken?
Is this something i can fixed on the warranty?
If so, even if i have installed a custom rom?
------
I turned the phone in and they replaced the SWAP-Unit. All on warenty! When i turned the phone in i asked the dude there about custom rom and repairs, he said it dident matter aslong as its something wrong with the hardware and not the software ofcaurse
Can u run the phone on flashtool or SEUS from SE on the computer? Or is the phone not reconized on that either?
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
it says not recognized when i connect the phone to the pc even in flash mode, and the programs dont detect that its conneced.
leivz0r said:
it says not recognized when i connect the phone to the pc even in flash mode, and the programs dont detect that its conneced.
Click to expand...
Click to collapse
Then you propably got broken usb connector or your IC controler on motherboard stopped working. If you look at your connector and all the pins just looks fine then connector is really ok. Now, it is surely IC controller. You have to send your phone on warranty, and you are going to receive a new one. Yes, a new phone. There is no other way to fix this. And from what I know, you don't have to bother about different ROM installed. No one else bothers bout it too.
edit:
Oh BTW, if this happened now, then propably in short time you will loose ability to charge your phone VIA USB connetected to PC, if not immedietly then after this charging won't be possible at all, even with AC charger.... So... be prepared.
No my connections looked fine but on metering from the USB connector to the filtering circuit it was open circuit I flowed solder on the joint I then had continuity reassembled and all worked great, no need to go to the interface circuitary. I am saying if the system cannot read the voltage drop across the shunt resistor it cannot control the current and will not charge.
Sent from my X10i using XDA Premium App
+1, in my case it took about 2 weeks from pc unable to read phone to cannot charge at all.
diament said:
Then you propably got broken usb connector or your IC controler on motherboard stopped working. If you look at your connector and all the pins just looks fine then connector is really ok. Now, it is surely IC controller. You have to send your phone on warranty, and you are going to receive a new one. Yes, a new phone. There is no other way to fix this. And from what I know, you don't have to bother about different ROM installed. No one else bothers bout it too.
edit:
Oh BTW, if this happened now, then propably in short time you will loose ability to charge your phone VIA USB connetected to PC, if not immedietly then after this charging won't be possible at all, even with AC charger.... So... be prepared.
Click to expand...
Click to collapse
Sent from my X10i using XDA App
Since u guys are discussing this, I wanted to know how does one disconnect the phone from the the PC.what is mount and unmount?? Will it harm my device in anyway??? Which is the safest mode to connect it to PC??
first, try a different usb cable, I had the same problem. as for the mounting problem, should have made a new thread, but you should mount usb to transfer files, but no need to if just charging, but be sure to unmount or else you could corrupt your sd card, and it also creates another drive on your computer if you don't 'safely remove usb' after unmounting
Sent from my X10 using XDA Premium App
denenatse said:
first, try a different usb cable, I had the same problem. as for the mounting problem, should have made a new thread, but you should mount usb to transfer files, but no need to if just charging, but be sure to unmount or else you could corrupt your sd card, and it also creates another drive on your computer if you don't 'safely remove usb' after unmounting
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
m sorry didn't want to make a new thread so I asked my question here...am sorry..but where is the unmount option..on the comp or on the PC??
circleofomega said:
m sorry didn't want to make a new thread so I asked my question here...am sorry..but where is the unmount option..on the comp or on the PC??
Click to expand...
Click to collapse
on your phone - settings--}SD card and phone storage--}unmount SD card
circleofomega said:
m sorry didn't want to make a new thread so I asked my question here...am sorry..but where is the unmount option..on the comp or on the PC??
Click to expand...
Click to collapse
no no, its the one in the notification bar.
Sent from my X10 using XDA Premium App
Hey guys, I did try searching, but if I missed a post please link.
Problem is this: Randomly at the beginning of the week 3G stopped working, and along with that (probably unrelated, but never-the-less...) the phone, when plugged into any computer, would not be recognized ("Unrecognized Device" and under device status is it would say "This device cannot start. (Code 10)"). I did fix the 3G issue, but the phone still won't connect to any computer.
I've tried on computers with and without samsung drivers, with the phone both in and out of debug mode, usb storage both on and off. Currently on my PC it sees that it is a samsung device, but it has the yellow triangle, signifying that it still cannot start the device. Cannot ADB into it obviously, and cannot even get ODIN to see it when in download mode. Yes, I've also tried 2 different cables.
Using Windows 7 on all the computers I've tried it on (don't own anything older unfortunately/fortunately) and currently using ComRom 2 RC 2 PBJ (though this started on ComRom 1.3, and have tried the OTB kernel as well) thoughts?
Thanks guys!
Have you tried booting to CWM while plugged into the usb? That usually fixes it for me.
what i do is go to device managers look for your device and make sure the right drivers are installed once you install the drivers everything should be good
bryan901 said:
what i do is go to device managers look for your device and make sure the right drivers are installed once you install the drivers everything should be good
Click to expand...
Click to collapse
correct drivers are definitely installed.
hecantbreathe said:
Have you tried booting to CWM while plugged into the usb? That usually fixes it for me.
Click to expand...
Click to collapse
just gave that a shot. new dialog box popped up "usb device not recognized".
I'm probably going to try and go back to stock, but I'm not sure if that is really the issue.
Same thing here.. no idea what to do.. last time this happened I installed/uninstalled drivers until I thought I was going to puke.. even now I'm on a fresh install of Windows 7 x64 with SP1.. so .. this is really starting to suck!! Plug in the device and INSTANTLY "device unknown"... Yeah.. right!
Have both of you tried changing usb setting from mass storage to ask on connection? Uncheck usb debugging, go into usb settings change it from mass storage to ask on connection, go back and turn on usb debugging, then connect phone to computer.
landshark68 said:
Have both of you tried changing usb setting from mass storage to ask on connection? Uncheck usb debugging, go into usb settings change it from mass storage to ask on connection, go back and turn on usb debugging, then connect phone to computer.
Click to expand...
Click to collapse
I will do this promptly and post if there is a success story.. har har!! Thanks for the tip.. we'll see..
/EDIT/ Does nothing... nothing at all.. I hear the sound when USB is connected to Win7 ... then immediately says "unknown device" doesn't even seem to try and pull drivers.. it's almost ready to fly out the window...
/EDIT2/ Well I just got one step closer... I basically uninstalled ALL USB hosts, etc. Restarted, they installed.. then plugged phone in.. recognized, got the "installing device drivers", then FAILED to install... I'm lost.
Now here is the actual message that I am getting, I can only assume OP is too...
Windows has stopped this device because it has reported problems. (Code 43)
Click to expand...
Click to collapse
jbarcus81 said:
Now here is the actual message that I am getting, I can only assume OP is too...
Click to expand...
Click to collapse
Oddly enough, I'm not getting that. I'm getting error 10, device failed to start. I'm sure these are related somehow.
Also, I did try the above suggestion, with no success. I did notice though after I unchecked "usb debugging", told it to ask on connection, then re-enabled usb debugging i get "no accessibility services" which I'm not sure is an issue, but it is never-the-less an error message. does everyone get that message?
thanks for the help everyone
dopepope said:
Oddly enough, I'm not getting that. I'm getting error 10, device failed to start. I'm sure these are related somehow.
Also, I did try the above suggestion, with no success. I did notice though after I unchecked "usb debugging", told it to ask on connection, then re-enabled usb debugging i get "no accessibility services" which I'm not sure is an issue, but it is never-the-less an error message. does everyone get that message?
thanks for the help everyone
Click to expand...
Click to collapse
I get that message everytime I check usb debugging. Just click OK and everything should be fine.
All I know is that it's out-right ridiculous.. I seriously doubt there is anything wrong with either of our phones since this has worked fine to this point.. I'm just trying to get back to stock using ODIN .. but can't .. I am so frustrated I can't figure it out..
Something interesting here.. I plugged the USB cable into a port and windows said it was an unknown device.. I just plugged the cable in.. bad cable issues??
I have been attempting to fix this very problem for weeks. Nothing has worked. It won't even recognize the phone in Recovery or Download mode (Odin or Heimdall). I'm getting tempted to request a phone replacement.
For me it started right after I installed blackberry drivers on Win7 x64. Does anyone else have this in common? Maybe recently installed other USB drivers? Perhaps the problem and the install are mere coincidence? Anyway I ordered a new USB cable so I'll give that a try.
Also, has anyone trided naven's format utility? I'm starting to think this may be the signs of the USB port dying.
I wonder.. will there be an issue for service if I have a rooted phone with custom rom installed? That's the only issue right now about sending the phone back.. and the more I think and mess around with it.. if I hold the plug snug in the phone and wiggle the cable some, I can connect and disconnect... I think my cable is messed up ...
I think I have my issue resolved... Usb cable is bad... My buddy has the same cable end to his phone charger and it will charge my phone... And now my cable won't even do that... Need to find a usb cable to verify but it seems these cables are very sensitive... Check your cable OP...
Sent from my SCH-I500 using XDA App
I will update on if my issue is fixed when I get my usb cable on wednesday. Fyi, the samsung cable is available on amazon with prime shipping for around $2-3.
Sent from my SCH-I500 using XDA Premium App
Just picked up a USB cable from Walmart .. not a bad deal and guess what? Fixed 100% ... Was a bad USB cable. Never again will I use the Samsung USB cables.. only lasted about 3 months.. LoL.. All fixed!!! YAY!!!! OP - I think you will be all set as well once you get your new cable..
Replaced the cable and I still have the error. =(
I'm not sure what else I can even try...
EDIT: Fixed it. Uninstalled all USB drivers from my system and let windows reinstall them. toggled USB debugging on the device and mock locations on and it works. What an odd problem..
I Also solved this issue with a new cable. I had tried a different cable and still had the same problem.
So I wasted much of two days troubleshooting. Finally arranged for a warranty replacement but still had the same problem. I was getting ready to do a clean installation of windows and it struck me. Try a new cable, even though the two cable test ruled that out.
I figured that was worth a try before rebuilding windows.
The new cable fixed the problem. The 2 cable test should have revealed this. It's possible I had two issues and the warranty replacement and the cable fixed it.
Sorry that a second cable didn't fix the problem for the person above me.
Sent from my SCH-I500 using XDA Premium App
Hey Guys!
I have a suspect problem with my Atrix. I dont get an USB connection to my PC (Win7 64bit) or to my laptop (Win7 32bit).
So when I connect the USB cable, I get the message "USB connection" in the status bar, but only for 1-2 seconds and than its gone.
Sometimes (rarely) it works when I press fast on this message (but it can be only luck).
But I flashed today a new ROM (AURA) and with fastboot I havent had any problems.
The drivers are installed on my PC and with this PC it worked at beginning (some month ago).
I have tried:
-different-ROM flashed (aura, Vodafone 2.3.4)
-Debuggin-on / off
-2 Different USB cable
Can it be a hardware problem? But I wonder why I have no problems with fastboot (charging via USB also works of course!)...
After the flash I try to root with Oneclickroot-package, but the programm cant find my atrix.
Someone else has an idea or maybe the same problem with fix?
EDIT: Have somebody experience with the motorola warranty support? Have somebody problems with warranty (not only motorola) beacause of custom ROM or something..?
TT-DD said:
Hey Guys!
I have a suspect problem with my Atrix. I dont get an USB connection to my PC (Win7 64bit) or to my laptop (Win7 32bit).
So when I connect the USB cable, I get the message "USB connection" in the status bar, but only for 1-2 seconds and than its gone.
Sometimes (rarely) it works when I press fast on this message (but it can be only luck).
But I flashed today a new ROM (AURA) and with fastboot I havent had any problems.
The drivers are installed on my PC and with this PC it worked at beginning (some month ago).
I have tried:
-different-ROM flashed (aura, Vodafone 2.3.4)
-Debuggin-on / off
-2 Different USB cable
Can it be a hardware problem? But I wonder why I have no problems with fastboot (charging via USB also works of course!)...
After the flash I try to root with Oneclickroot-package, but the programm cant find my atrix.
Someone else has an idea or maybe the same problem with fix?
EDIT: Have somebody experience with the motorola warranty support? Have somebody problems with warranty (not only motorola) beacause of custom ROM or something..?
Click to expand...
Click to collapse
my first atrix was replaced free (i was inside of the first 30 days) the second one my screen cracked and i did have warrenty however it would cost 140 +shipping so i just bought a new one for 99 lol and am planing to crack open the 2nd atrix and try to replace rhe screen
cause u can buy a new screen for like 40-60 bucks
then i plan to sell it on craigslist
dont think that answers your question
however if they can determine if its "hardware" related and not due to abuse and "normal use they prolly just extchange it
and yes all three of my atrixes were /are rooted and unlocked
Sent from my MB860 using Tapatalk
This may sound silly but my atrix really does not like the USB ports on the front of my case
Have you tryed a different USB port
You have made sure that the usb mode is not "none" right? Because otherwise it will charge like normal and fastboot will work because that is pre OS but it won't transfer data when the phone is on.
oddbubble said:
This may sound silly but my atrix really does not like the USB ports on the front of my case
Have you tryed a different USB port
Click to expand...
Click to collapse
Ya, I know this with some other phones or equipment. I test it, but no change.
bonez565 said:
You have made sure that the usb mode is not "none" right? Because otherwise it will charge like normal and fastboot will work because that is pre OS but it won't transfer data when the phone is on.
Click to expand...
Click to collapse
Can you my how? I think this selection come when the USB cable get connected?!
If I connect the cable to my phone, I get shortly the message "USB Connection - Mass storage" (sry, I dont know the true message in english)
TT-DD said:
Ya, I know this with some other phones or equipment. I test it, but no change.
Can you my how? I think this selection come when the USB cable get connected?!
If I connect the cable to my phone, I get shortly the message "USB Connection - Mass storage" (sry, I dont know the true message in english)
Click to expand...
Click to collapse
I have problems if I move my phone while plugged in. Have you tried setting it on a table and plugging in and making sure not to move it?
rquinn19 said:
I have problems if I move my phone while plugged in. Have you tried setting it on a table and plugging in and making sure not to move it?
Click to expand...
Click to collapse
Of course! Now I tested if I get connection with MSU or RSD to my phone. But no... nothing. DAMN!
EDIT: RSD works! Now I think it gets more and more suspekt.
EDIT2: I tested it in the cardock. But it dont goes to the "carmodus", loading only!
If its under warranty, warranty it out. I'm on my 3rd atrix in 11 months. Faulty digitizers...
erick161 said:
If its under warranty, warranty it out. I'm on my 3rd atrix in 11 months. Faulty digitizers...
Click to expand...
Click to collapse
Seeing how the Atrix is less than a year old I don't understand why we can't just walk into the store and get warranty work as long as it's not something done by the user of course. They know if it's one of their phones they sold by the imei. What difference does it make if I bought it 2nd hand?
Just ranting...
So, the problem was a defect mainboard. I sent it back to motorola and now it works again. Thx for help!
Close//
Gesendet von meinem MB860 mit Tapatalk
I have a stock Amaze which I bought used. It charges fine through the USB but I can not mount it to my PC.
The PC does not acknowledge the phone at all and the phone does not acknowledge the PC at all, It just begins charging. I asked the previous owner, but he says that he always used a card reader and never tried accessing the phone through the USB port.
Has anyone run into this?
d73805 said:
I have a stock Amaze which I bought used. It charges fine through the USB but I can not mount it to my PC.
The PC does not acknowledge the phone at all and the phone does not acknowledge the PC at all, It just begins charging. I asked the previous owner, but he says that he always used a card reader and never tried accessing the phone through the USB port.
Has anyone run into this?
Click to expand...
Click to collapse
have you tried all of your usb ports.. and also maybe checking to see if you have the htc usb drivers installed.. or if they are upto date.. and about uninstalling all of your usb drivers.. restarting your pc and trying again... or checking if the phone can mount to another computer just to make sure its not your computer..?
Ninjistix said:
have you tried all of your usb ports.. and also maybe checking to see if you have the htc usb drivers installed.. or if they are upto date.. and about uninstalling all of your usb drivers.. restarting your pc and trying again... or checking if the phone can mount to another computer just to make sure its not your computer..?
Click to expand...
Click to collapse
I've tried multiple computers and multiple cables including 2 OE HTC cables with the odd end. I've restarted the PCs and the phone. I tried with USB de-bugging both checked and unchecked. I haven't updated any drivers but I did install HTC Sync on one of the computers. I would think that even without the proper drivers, I would at least get an error message but I get nothing.
you need to install the htc usb drivers for the phone to be recognized by your computer.. open device manager and go to usb settings.. plug your phone it to see if it registers on the device manager.. after you installed the htc usb drivers (you don't need htc sync thats for updating and backing up sense)... if anything you can try to factory reset your phone..
Ninjistix said:
you need to install the htc usb drivers for the phone to be recognized by your computer.. open device manager and go to usb settings.. plug your phone it to see if it registers on the device manager.. after you installed the htc usb drivers (you don't need htc sync thats for updating and backing up sense)... if anything you can try to factory reset your phone..
Click to expand...
Click to collapse
I installed installed a driver package that that was named "HTCDriver3.0.0.007". Nothing registers in the device manager when I plug the phone in. I'll try a factory reset tonite and see what happens.
Also, I sent a message to HTC support this morning, but I didn't get a response yet.
Thanks for the help so far. If anybody's got any more ideas or experience with this, I'd love to hear.
dose your computer make any sounds when you connect the phone to it? and where did you get those drivers from? you might want to uninstall them and install the ones that come with hasoon's AIO toolkit.. or get them directly from the htc website
Ninjistix said:
dose your computer make any sounds when you connect the phone to it? and where did you get those drivers from? you might want to uninstall them and install the ones that come with hasoon's AIO toolkit.. or get them directly from the htc website
Click to expand...
Click to collapse
That driver actually did come from hasoon. The only thing available from the HTC site was Sync and a tethering driver, which I tried both.
when you install and uninstall drivers from the computer normally your suppose to restart the computer and the device.. and dose your computer make a sound when you plug your phone in? and does the charging light on the phone come on?
Ninjistix said:
when you install and uninstall drivers from the computer normally your suppose to restart the computer and the device.. and dose your computer make a sound when you plug your phone in? and does the charging light on the phone come on?
Click to expand...
Click to collapse
There's no sound from the PC or phone, but the charging light does come on.
if the light comes on the device is connecting to the computer.. if there's no sound the device isn't being recognized by what your plugin it into.. there could be one issue with the usb drivers on the computer and or something wrong with the usb port of the phone.. do you have another phone to connect it to the same cable.. using the same usb port on the pc to see if that phone gets recognized by the computer...? if it does then there's a problem with your phones usb port.. if it doesnt then it might be the cable or the usb port.. do the following un-install all of your usb drivers.. even the htc one.. restart your computer in safe mode with networking and then re-install the drivers and then plug in the phone to test it.. or you can boot the phone into bootloader by removing the battery from the phone then re-inserting it and power on the phone by holding volume down and power till the phone boots up.. go to fastboot and see if the phone recognizes the usb from there...
i still think the main issue here is driver related though.. maybe you have a virus on your computer messing with the drivers or firewall or antivirus or something.. but try the safemode with networking first before anything else...
Ninjistix said:
if the light comes on the device is connecting to the computer.. if there's no sound the device isn't being recognized by what your plugin it into.. there could be one issue with the usb drivers on the computer and or something wrong with the usb port of the phone.. do you have another phone to connect it to the same cable.. using the same usb port on the pc to see if that phone gets recognized by the computer...? if it does then there's a problem with your phones usb port.. if it doesnt then it might be the cable or the usb port.. do the following un-install all of your usb drivers.. even the htc one.. restart your computer in safe mode with networking and then re-install the drivers and then plug in the phone to test it.. or you can boot the phone into bootloader by removing the battery from the phone then re-inserting it and power on the phone by holding volume down and power till the phone boots up.. go to fastboot and see if the phone recognizes the usb from there...
i still think the main issue here is driver related though.. maybe you have a virus on your computer messing with the drivers or firewall or antivirus or something.. but try the safemode with networking first before anything else...
Click to expand...
Click to collapse
No luck with safe mode. I just ordered a new OE USB cable. It's hard to believe that I have 2 bad cables, but it was cheap enough. I may try the reset also.
d73805 said:
That driver actually did come from hasoon. The only thing available from the HTC site was Sync and a tethering driver, which I tried both.
Click to expand...
Click to collapse
Unfortunately to me it sounds like a messed up usb port in your phone. I have a moto defy that got water in the USB port and same problem now. It charges, but is not recognized by the computer in any way. No matter what computer, drivers installed or not, my amaze is always recognized somehow, when I plug it into a computer.
Sent from my HTC_Amaze_4G using xda app-developers app
masondoctorjt said:
Unfortunately to me it sounds like a messed up usb port in your phone. I have a moto defy that got water in the USB port and same problem now. It charges, but is not recognized by the computer in any way. No matter what computer, drivers installed or not, my amaze is always recognized somehow, when I plug it into a computer.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
You're probably right. I would think that if it were connecting I would get some sort of message from either the phone or the PC.
d73805 said:
You're probably right. I would think that if it were connecting I would get some sort of message from either the phone or the PC.
Click to expand...
Click to collapse
If anyone cares to know, I got a response from HTC. They had me do some tests which I had already done (different cables, different ports, reset the phone), which of course didn't work. They told me to call the service center. The girl I talked to seemed reasonably knowledgeable. She told me that it's very unusual for the port to be bad in such a way that it charges but won't pass data, but that it was not impossible. She checked the serial number and told me that I was on my last day of warranty and if I shipped it that day it would be covered, assuming there is no damage due to owner misuse. So I sent it in.
Assuming they can and do fix it, I'm not sure if they will give me any details as to what was wrong, but I will let everyone know what happened. I saw a few instances online of people having the same issues as me with HTC phones but no one ever seemed to have any solutions.
i'm not shocked that htc wasn't able to help... 75% of the time the people working tech support don't know anything they always read "steps" to fix certain problems from their database... **** i learned so much about computer's from google its not even funny... i don't call tech support unless "google" cant find a solution.. lol
Ninjistix said:
i'm not shocked that htc wasn't able to help... 75% of the time the people working tech support don't know anything they always read "steps" to fix certain problems from their database... **** i learned so much about computer's from google its not even funny... i don't call tech support unless "google" cant find a solution.. lol
Click to expand...
Click to collapse
My Amaze has been fixed under warranty and will supposedly be here tomorrow. I doubt HTC will tell me what the problem was, or whether it was a hardware or software issue.
Thanks for all the help. You'll be hearing from me.