Hi
I can remember exactly. But definetively since a while the fingerprint sensor is not working.
If it was after a update, I cant remember.
And in settings, I do not find any option for the sensor, e.g. adding a fingerprint.
It is EMUI 8 and phone bought in China for much less than 300€ some month ago in summer.
Probably bought a fake rip
Davilince said:
Probably bought a fake rip
Click to expand...
Click to collapse
No, this time no fake
It worked for somes quiet well. Since some weeks, nothing. Probably crappy SW Update, bad quality/test or so...
Small reset didnt helped.
Any other ideas, before try of big reset. Maybe this will help, maybe not. But lot of work to readjust settings...
Michael? said:
No, this time no fake
It worked for somes quiet well. Since some weeks, nothing. Probably crappy SW Update, bad quality/test or so...
Small reset didnt helped.
Any other ideas, before try of big reset. Maybe this will help, maybe not. But lot of work to readjust settings...
Click to expand...
Click to collapse
Try to wipe cache via recovery.
Santi_SAZ said:
Try to wipe cache via recovery.
Click to expand...
Click to collapse
Yeah, sounds like works. At Xiao Mi I was able, did it with several phones.
Ok, first full reset after backup. Still problem, then flash or waiting for next update...
Michael? said:
Yeah, sounds like works. At Xiao Mi I was able, did it with several phones.
Ok, first full reset after backup. Still problem, then flash or waiting for next update...
Click to expand...
Click to collapse
Try downloading last update through erecovery, or contact them
Santi_SAZ said:
Try downloading last update through erecovery, or contact them
Click to expand...
Click to collapse
already on latest EMUI. I even didnt unlock or changed anything. Thats why so disappointed. On Xiao Mi, root, unlock, ... and all worked fine. Here no change in system and xx stuff happens...
Michael? said:
already on latest EMUI. I even didnt unlock or changed anything. Thats why so disappointed. On Xiao Mi, root, unlock, ... and all worked fine. Here no change in system and xx stuff happens...
Click to expand...
Click to collapse
Yeah, is the easiest device to brick it. It bricks itself only watching it.
The eRecovery is a emergency recovery, I never used it, but you can try downloading last update package and flashing it, do a data backup before
Santi_SAZ said:
Yeah, is the easiest device to brick it. It bricks itself only watching it.
The eRecovery is a emergency recovery, I never used it, but you can try downloading last update package and flashing it, do a data backup before
Click to expand...
Click to collapse
no, i didnt brick it.
didnt do any unlock, or so. At Xiao Mi I did, and it worked without problems. Here I didnt do it, because to busy and OTA.
Did now,Factory reset, didnt bring any difference. Still no sensor on the bottom and fingerprint in settings.
Michael? said:
no, i didnt brick it.
didnt do any unlock, or so. At Xiao Mi I did, and it worked without problems. Here I didnt do it, because to busy and OTA.
Did now,Factory reset, didnt bring any difference. Still no sensor on the bottom and fingerprint in settings.
Click to expand...
Click to collapse
Since automatic EMUI check, I am on latest version. I think, if bad SW update I need to go back to older version. But this is difficult?
Any idea when next update is coming?
Michael? said:
Since automatic EMUI check, I am on latest version. I think, if bad SW update I need to go back to older version. But this is difficult?
Any idea when next update is coming?
Click to expand...
Click to collapse
I think, to version downgrade you need a unlocked bootloader, IDK whwn will be the next release, which is your model, C432, C636, C675?
Santi_SAZ said:
Yeah, is the easiest device to brick it. It bricks itself only watching it.
The eRecovery is a emergency recovery, I never used it, but you can try downloading last update package and flashing it, do a data backup before
Click to expand...
Click to collapse
So after hard reset, still ****ty SW or HW.
I dont understand, eRecovery.
I am already on latest EMUI. Even got update this week, but only security.... and security not so helpful currently, if phone not working so nice
Michael? said:
So after hard reset, still ****ty SW or HW.
I dont understand, eRecovery.
I am already on latest EMUI. Even got update this week, but only security.... and security not so helpful currently, if phone not working so nice
Click to expand...
Click to collapse
https://www.reddit.com/r/Huawei/comments/8yge1t/huawei_erecovery/
Santi_SAZ said:
https://www.reddit.com/r/Huawei/comments/8yge1t/huawei_erecovery/
Click to expand...
Click to collapse
BKL-AL00
reddet link i dont have that things there.
.reboot
.wipe da/factory reset (borh dones, stays with last SW version)
.wipe cache partition (no effect)
Hi guys, I broke my fingerprint when I replaced my lcd, meanwhile I received the update to EMUI 9. Ordered a new fingerprint, put it on place and nothing appears on the option. I thought that the fingerprint came damaged so I have ordered a new one. Put it in place and nothing again. Any ideas to get it work on EMUI 9 or we have to go back to the EMUI 8? Thanks guys
Madureira29 said:
Hi guys, I broke my fingerprint when I replaced my lcd, meanwhile I received the update to EMUI 9. Ordered a new fingerprint, put it on place and nothing appears on the option. I thought that the fingerprint came damaged so I have ordered a new one. Put it in place and nothing again. Any ideas to get it work on EMUI 9 or we have to go back to the EMUI 8? Thanks guys
Click to expand...
Click to collapse
Same happened with me but my sensor worked. Could've the supplier you're buying from
Santi_SAZ said:
I think, to version downgrade you need a unlocked bootloader, IDK whwn will be the next release, which is your model, C432, C636, C675?
Click to expand...
Click to collapse
Sorry, wasnt here for a while.
After big FW updrade, still no function. And still anoying chinese app, and too much Honor spam help/AI, whatever...
But I figured out, Cyanogen Mod available, yeah.
Am I right?
https://www.cyanogenmods.org/lineag...or_Lineage_OS_16_Android_90_Pie_Download_list
BKL-AL00 is what is written on the back of the case.
Shall I try it?
Maybe fingerprint returns, at least new FW.
Michael? said:
Sorry, wasnt here for a while.
After big FW updrade, still no function. And still anoying chinese app, and too much Honor spam help/AI, whatever...
But I figured out, Cyanogen Mod available, yeah.
Am I right?
https://www.cyanogenmods.org/lineag...or_Lineage_OS_16_Android_90_Pie_Download_list
BKL-AL00 is what is written on the back of the case.
Shall I try it?
Maybe fingerprint returns, at least new FW.
Click to expand...
Click to collapse
If you had a big FW and it didn't solve it, seems your fringerprint is broken
CyanogenMod is dead, now is LineageOS, you can try it, but if your sensor is fisically broken any ROM can bring it to life.
Santi_SAZ said:
If you had a big FW and it didn't solve it, seems your fringerprint is broken
CyanogenMod is dead, now is LineageOS, you can try it, but if your sensor is fisically broken any ROM can bring it to life.
Click to expand...
Click to collapse
yeah, agree. I forgot it.
but no fingerprint is not really annoying. in the next phone i could even renounce on it.
But interestingly (as u have maybe seens in the link) they are still bringing updates .... Even supporting Mi8 , as lineagoe.
So, better not to install it?
I would be even bit happier if I get rid of the original OS from honor...
Michael? said:
yeah, agree. I forgot it.
but no fingerprint is not really annoying. in the next phone i could even renounce on it.
But interestingly (as u have maybe seens in the link) they are still bringing updates .... Even supporting Mi8 , as lineagoe.
So, better not to install it?
I would be even bit happier if I get rid of the original OS from honor...
Click to expand...
Click to collapse
You can try it if you want, I think it wouldn't fix the fringerprint sensor.
First read the whole thread about LOS first before do anything https://forum.xda-developers.com/honor-view-10/development/rom-lineageos-16-0-t3876509
Here is the link to download https://download.lineageos.org/berkeley
Related
Laugh if you must, please help if you can.
Mt2-L03
Situation is this I was running Pac 9/5 and want to upgrade, well after several failed attempts I saw newer Pac roms need 322 base. So I said well I have flashed so many times piece of cake. Well I flash recovery and then run 322 up grade and low and behold phone boots!
Well here is the punchline 322 boots to smartcover screen only!!!! I can not get into phone No problem I will upgrade twrp :fingers-crossed: oops 322 developer mode disabled! no ADB for me :crying: So no smart cover but in smartcoverlock screen it will not open.
Suggestions?
TIA
UPDATE: downgraded to ICS (sorry) thought cool as smart cover never worked in that. Well woops it sure does now. WTF Buy a smart cover from EBAY I guess. Hope that works!!!!
I am not sure how it got turned on but I can't flash anything but stock as no developer options enabled
oncouch1 said:
Laugh if you must, please help if you can.
Situation is this I was running Pac 9/5 and want to upgrade, well after several failed attempts I saw newer Pac roms need 322 base. So I said well I have flashed so many times piece of cake. Well I flash recovery and then run 322 up grade and low and behold phone boots!
Well here is the punchline 322 boots to smartcover screen only!!!! I can not get into phone No problem I will upgrade twrp :fingers-crossed: oops 322 developer mode disabled! no ADB for me :crying: So no smart cover but in smartcoverlock screen it will not open.
Suggestions?
TIA
UPDATE: downgraded to kk thought cool as smart cover never worked in that. Well woops it sure does now. WTF Buy a smart cover from EBAY I guess. Hope that works!!!!
Click to expand...
Click to collapse
Not sure about your issue. Maybe try to upgrade to B322 again?
BTW, Smart cover won't work on PAC-ROM or CM.
Edited: I meant you won't see anything other than clock from the smart cover window.
oncouch1 said:
Laugh if you must, please help if you can.
Situation is this I was running Pac 9/5 and want to upgrade, well after several failed attempts I saw newer Pac roms need 322 base. So I said well I have flashed so many times piece of cake. Well I flash recovery and then run 322 up grade and low and behold phone boots!
Well here is the punchline 322 boots to smartcover screen only!!!! I can not get into phone No problem I will upgrade twrp :fingers-crossed: oops 322 developer mode disabled! no ADB for me :crying: So no smart cover but in smartcoverlock screen it will not open.
Suggestions?
TIA
UPDATE: downgraded to kk thought cool as smart cover never worked in that. Well woops it sure does now. WTF Buy a smart cover from EBAY I guess. Hope that works!!!!
Click to expand...
Click to collapse
Which phone do you have. 322 was for mt2-l03. No KK for this phone.
Moody66 said:
Which phone do you have. 322 was for mt2-l03. No KK for this phone.
Click to expand...
Click to collapse
I thought that's a typo.
MT2-User said:
I thought that's a typo.
Click to expand...
Click to collapse
Ya. Confusing. Afraid to try and help until I understand. Lol
MT2-User said:
I thought that's a typo.
Click to expand...
Click to collapse
my error again!
oncouch1 said:
my error again!
Click to expand...
Click to collapse
To turn on developer options open settings... Select about phone... Tap on build number 10 times. Then back to settings and it will be available. BTW I do believe you can get snqrt cover working by using an xposed module with CM or PAC.
Moody66 said:
To turn on developer options open settings... Select about phone... Tap on build number 10 times. Then back to settings and it will be available. BTW I do believe you can get snqrt cover working by using an xposed module with CM or PAC.
Click to expand...
Click to collapse
The rub is I have no smart cover, the phone is just acting like it. I cannot open lock screen. I have the small clock showing. I tried calling it but rather than showing the symbols to unlock it goes to voicemail.
oncouch1 said:
The rub is I have no smart cover, the phone is just acting like it. I cannot open lock screen. I have the small clock showing. I tried calling it but rather than showing the symbols to unlock it goes to voicemail.
Click to expand...
Click to collapse
Hmmm. Could be actually damaged. Flash cm or PAC and see how it does.
Moody66 said:
Hmmm. Could be actually damaged. Flash cm or PAC and see how it does.
Click to expand...
Click to collapse
Thanks but I only have stock recovery and cannot adb as developer mode.l not enabled.
Guess I proved you can brick these afterall .
If the computer is still able to see your phone and or SD when you connect it you may want to try copying the b322 update to your SD card and reflash B322. As far as I know the phone should still allow you to transfer files to it without having ADB enabled. If not then I don't know what else to do.
oncouch1 said:
Thanks but I only have stock recovery and cannot adb as developer mode.l not enabled.
Guess I proved you can brick these afterall .
Click to expand...
Click to collapse
No it's not bricked.. Just boot TWRP from your PC and flash whatever you want. And twrp.. Fastboot. I will find a link. Thanks superbass.https://m.youtube.com/watch?v=sjA4F_TzzwQ
oncouch1 said:
Thanks but I only have stock recovery and cannot adb as developer mode.l not enabled.
Guess I proved you can brick these afterall .
Click to expand...
Click to collapse
You don't need to have ADB enabled for commands to work in fatsboot. So you can still flash TRWP.
I would just do the triple button method before you install TWRP, let stock recovery wipe and reflash the stock 322 build and see where you're at.
OK, how do I buy you guys a beer? I am back up and running pac rom. I followed moody's link and flashed twrp. Thank you so much!
This community rules!!!!!
oncouch1 said:
OK, how do I buy you guys a beer? I am back up and running pac rom. I followed moody's link and flashed twrp. Thank you so much!
This community rules!!!!!
Click to expand...
Click to collapse
Glad to hear it! Hopefully someone else that has that issue will find this useful!
I think it ended up being a DPI issue as I always use 240. When I tried to load 322 again same thing, both attempts I was running PAC at 240.
Thanks again.
ok so after getting backup and running pac rom for months. I tried to go back to stock b322. I still end up with the lockscreen like i set smartcover and cant unlock. I was thinking resolution but I left it stock. Any suggestions on how to try and get stock lollipop?
BTW: I bought a smart cover and of coars e it didn't work.
Hey guys nougat is available to download for axon 7.
A2017U only, of course...
(so far)
Just restored to stock form LeanageOS to give it a spin. Downloading now. Although I saw it on Reddit first ><
I remember lots of people in the other nougat threads that ripped on ZTE saying there's no way it would be ready.. a little late, but not too late. Good job ZTE.
Takenover83 said:
Just restored to stock form LeanageOS to give it a spin. Downloading now. Although I saw it on Reddit first ><
Click to expand...
Click to collapse
Just did the same. Flashed full b29, downloaded update and it failed.
Factory reset, now waiting for download again.
lafester said:
Just did the same. Flashed full b29, downloaded update and it failed.
Factory reset, now waiting for download again.
Click to expand...
Click to collapse
I had the same problem. On my 2nd go around as well. First time I restored B29 from TWRP. After the failed update. I reflashed B29 via the official recovery, and then re-downloaded the Nougate update again. Will update.
Edit: Success.
Takenover83 said:
I had the same problem. On my 2nd go around as well. First time I restored B29 from TWRP. After the failed update. I reflashed B29 via the official recovery, and then re-downloaded the Nougate update again. Will update.
Edit: Success.
Click to expand...
Click to collapse
Nice. almost there myself.
Takenover83 said:
I had the same problem. On my 2nd go around as well. First time I restored B29 from TWRP. After the failed update. I reflashed B29 via the official recovery, and then re-downloaded the Nougate update again. Will update.
Edit: Success.
Click to expand...
Click to collapse
Do you recommend to unlock bootloader before upgrading?
jorch_oc said:
Do you recommend to unlock bootloader before upgrading?
Click to expand...
Click to collapse
Don't know yet. A beta user said all they had to do was go into fastboot and unlock... Hopefully the release build is the same.
So... either wait and see, unlock now, or go for it and be the first to try.
Does nougat have the dreaded power management?
Just tested Daydream a bit. The power button is no longer a problem
But I can't find any options to adjust blur or flicker like in LeanageOS. Also, I still get quiet a bit of drifting to the right. Was hoping Official would help with that, as other fixes/solutions had minimal impact for me.
borijess said:
Does nougat have the dreaded power management?
Click to expand...
Click to collapse
It now has 3 options
Always remind to clean
Auto-clean without reminding
Do not clean
Fastboot doesn't appear to accept any commands unfortunately.
Is this still MiFavour 4.0 or maybe a new version?
4.2
lafester said:
Fastboot doesn't appear to accept any commands unfortunately.
Click to expand...
Click to collapse
Yep, was like grrr when I went to flash twrp.
Takenover83 said:
Yep, was like grrr when I went to flash twrp.
Click to expand...
Click to collapse
So what's the easiest method to install? Trying tennear's tool but I keep getting failed to open recovery.bin.
It came OTA
Could somebody pls pull the ota link?
I can confirm. I am downloading right now. I will try to pull the OTA when it has finished.
A good day to all!
I have had an issue with my S6 edge (SM-G925F, Philippines Globe Carrier Version) for months now wherein it keeps restarting/crashing. The problem persists so randomly, sometimes multiple times a day or sometimes a day or two without it. I've already tried everything I could find in the internet, such as; deleting the cache in recovery, factory wiping the phone, and flashing the newest firmware i found for it on sammobile. Noting seemed to work. This is my last attempt in fixing the phone before I give up. I hope someone can give me good advice about this.
So nobody knows how to fix this? I don't care if it's a hardware problem i just wanna know
yh man,same problem...i cant even boot to the system..is your led flashing blue?
buzzsaw345 said:
So nobody knows how to fix this? I don't care if it's a hardware problem i just wanna know
Click to expand...
Click to collapse
Is the phone currently working?
It sounds like it could be the hardware failing, could be the emmc failing.
The only thing to suggest at this point is to wipe data/cache in recovery and flash a new firmware.
Or try a custom ROM. If it happens on the custom ROM also then it's possibly hardware.
pexluka said:
yh man,same problem...i cant even boot to the system..is your led flashing blue?
Click to expand...
Click to collapse
Mine can actually boot to the system but it always crashes after some time of use.
callumbr1 said:
Is the phone currently working?
It sounds like it could be the hardware failing, could be the emmc failing.
The only thing to suggest at this point is to wipe data/cache in recovery and flash a new firmware.
Or try a custom ROM. If it happens on the custom ROM also then it's possibly hardware.
Click to expand...
Click to collapse
That's EXACTLY what i was thinking although i did not know that was the name of the part. I was just thinking the memory module was maybe defective already. Dang it so the logic board should be replaced right? Because as far as I know the memory is soldered to the board and hard to remove by itself let alone replacing it.
I've already tried the wiping of data/cache and flashed the newest firmware using Odin but the problem still persists.
Also tried the custom ROM and I've tried a lot of them non actually boots to the system. Only flashing the official firmware allows me to boot to the system.
Thank you for the reply I will now just give up on this and just buy a OnePlus 3T.
buzzsaw345 said:
That's EXACTLY what i was thinking although i did not know that was the name of the part. I was just thinking the memory module was maybe defective already. Dang it so the logic board should be replaced right? Because as far as I know the memory is soldered to the board and hard to remove by itself let alone replacing it.
I've already tried the wiping of data/cache and flashed the newest firmware using Odin but the problem still persists.
Also tried the custom ROM and I've tried a lot of them non actually boots to the system. Only flashing the official firmware allows me to boot to the system.
Thank you for the reply I will now just give up on this and just buy a OnePlus 3T.
Click to expand...
Click to collapse
If it's the emmc then only way to fix is to replace the full motherboard, which isn't cheap.
It's a known problem on note 4. Emmc chip fails and eventually completely packs in.
Which custom Roms did you try? Carhd rom is a good one to try very reliable. Also when flashing a custom ROM it can take 20-30 minutes to boot into the system.
callumbr1 said:
If it's the emmc then only way to fix is to replace the full motherboard, which isn't cheap.
It's a known problem on note 4. Emmc chip fails and eventually completely packs in.
Which custom Roms did you try? Carhd rom is a good one to try very reliable. Also when flashing a custom ROM it can take 20-30 minutes to boot into the system.
Click to expand...
Click to collapse
True they are very expensive that's why I'd rather just buy a new phone. I just didn't want to give up such good hardware until I've tried everything.
Oh really? I wonder why that's the case
I actually forgot which ones already but I'm sure I tried Carhd and it didn't boot for more than an hour. But I'll go and check again just to be thorough.
buzzsaw345 said:
True they are very expensive that's why I'd rather just buy a new phone. I just didn't want to give up such good hardware until I've tried everything.
Oh really? I wonder why that's the case
I actually forgot which ones already but I'm sure I tried Carhd and it didn't boot for more than an hour. But I'll go and check again just to be thorough.
Click to expand...
Click to collapse
Yeah it's a shame really. I could be wrong that might not occur on yours. Normally when you get emmc failure, the phone will reboot to download mode and give you an error along the lines of emmc Write fail. And then keep repeating this.
3T is a good choice to go for if that's what you decide
callumbr1 said:
Yeah it's a shame really. I could be wrong that might not occur on yours. Normally when you get emmc failure, the phone will reboot to download mode and give you an error along the lines of emmc Write fail. And then keep repeating this.
3T is a good choice to go for if that's what you decide
Click to expand...
Click to collapse
It's alright I feel like whatever the hardware issue is it'll require the motherboard to be swapped out anyways. I can finally let the phone rest in peace haha thank you very much.
Yeah it's perfect for an android enthusiast. Already ordered one. Good bye and thanks again!
buzzsaw345 said:
It's alright I feel like whatever the hardware issue is it'll require the motherboard to be swapped out anyways. I can finally let the phone rest in peace haha thank you very much.
Yeah it's perfect for an android enthusiast. Already ordered one. Good bye and thanks again!
Click to expand...
Click to collapse
No problem buddy enjoy your one plus 3
thanks guys,i get the same problem,no rom wants to boot,i can install twrp and custom roms ut cant boot the rom..i once managed to oot to i think it was custom rom,but apps still kept crashing and i couldnt finish the welcoming screen
i got it with android m and apps were crashing all the time,and phone was restarting..
so motheroard it is?
pexluka said:
thanks guys,i get the same problem,no rom wants to boot,i can install twrp and custom roms ut cant boot the rom..i once managed to oot to i think it was custom rom,but apps still kept crashing and i couldnt finish the welcoming screen
i got it with android m and apps were crashing all the time,and phone was restarting..
so motheroard it is?
Click to expand...
Click to collapse
Wouldn't say it was motherboard yet. After you flash your rom you need to boot to recovery and wipe data/cache. This will fix the apps crashing
done,cant boot the system.
gave a visit to a few services,they sad around 50e would be reparation,but im student and now dont have cash for that ****..you have any other suggestions? i tried custom roms,at first magisk would always faild,last time it was ok but still couldnt boot
pexluka said:
done,cant boot the system.
gave a visit to a few services,they sad around 50e would be reparation,but im student and now dont have cash for that ****..you have any other suggestions? i tried custom roms,at first magisk would always faild,last time it was ok but still couldnt boot
Click to expand...
Click to collapse
Do not pay for it. Chances are if you can't fix it they can't either.
So have you tried flashing stock firmware?
What Android version do you have and what region? What's full model number g925?
Reduce the cpu frequencies to 1200-800mhz for big and little and userspace governor. This the only fix.
ok,so one more thing,on the glass back of the phone sits one imei that is not correct,and on the battery is another,which reports 64g version,while next to that number is printed 32gb and phone actually has 32gb lool
it is supposed to be g925f,but after i installed some custom rom,pc showed it as g925s? i think it is due to rom signing the wrong model number
the last thing i have done was yesterday,and it was flashing firmware through kies again.
and this is what i get :
s6 edge powered by android,followed by blue screen 'installing system update',and then recovery
in the recovery,i get this :
android recovery
samsung/zeroltexx/zerolte
7.0/NRD90M/G925FXXU5EQBG
user/release-keys
*recovery options*
No suppoer SINGLE-SKU
Supported API: 3
dm-verity error...
i realy dont know what else to try,and i am open to all suggestions..i have read that emmc storage is broken so this kind of problems can occur,so maybe service would do that?
thank you,i know this is confusing and boring problem
i tried with odin once more,and it failed at 25% instaing system update,then i restarted it and it got up to 32% and started erasing and it turned off..tf with this phone?? i guess its broken...
pexluka said:
i tried with odin once more,and it failed at 25% instaing system update,then i restarted it and it got up to 32% and started erasing and it turned off..tf with this phone?? i guess its broken...
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925F/VOD/download/G925FXXU5EQBG/125195/
Download and flash that firmwsre through odin before you try anything else. Let me know what happens.
I can tell you it's likely not emmc failure. For this you would get random reboots and it would reboot to download mode. There you would have an error emmc_write_error.
wowo thanks,i just gave up on that phone,i will try again,i will report back!
just one question,why vodafone?
oh,and i did have random reboots on android m,but it would reboot to optimizing android and boot
The other day I woke up and saw the notification for an EMUI update so I proceeded to install it. It downloaded and installed correctly. However, when it rebooted, it booted into Huawei eRecovery. I tried to restore using WiFi with no success. I tried clearing my cache and doing a factory reset with no success either.
Can you guys help me? Thanks a lot.
Try factory reset again and wait till the phone boots up or runs out of battery, worked for me once.
Augustoandro said:
Try factory reset again and wait till the phone boots up or runs out of battery, worked for me once.
Click to expand...
Click to collapse
It didn't work. Any other ideas?
Reinstall your firmware
Viruz said:
Reinstall your firmware
Click to expand...
Click to collapse
I don't know which firmware I had. Is there any way to know that? I never rooted the phone, so it must be the official firmware. Is there any site to look up for that? I searched and didn't find anything, but I'm really new to all of this.
K no problem , download official firmware and flash It
link : http://huawei-firmware.com/rom/huawei-honor-8/frdl02/1616
Viruz said:
K no problem , download official firmware and flash It
link : http://huawei-firmware.com/rom/huawei-honor-8/frdl02/1616
Click to expand...
Click to collapse
Thanks for the reply. Before I try this I have a couple of questions. Doing this voids the warranty? Would I get notifications for new android/emui updates like before?
Ya your warranty is void .
You will definitely get emui updates in notification.
If you don't want that update simply ignore it
Viruz said:
Ya your warranty is void .
You will definitely get emui updates in notification.
If you don't want that update simply ignore it
Click to expand...
Click to collapse
Sorry for answering so late, but I hadn't time to try this until now.
It didn't work, any more ideas?
After updating my Pocophone to the latest version, both my mobile data and wifi took a significant hit in speeds, it was able to hit 2.4mbps easily while now it can barely hit 200kbps. Has anyone else experienced this and does anyone have any idea on how to fix this and if not, how do I let Xiaomi know of this so they can fix this?
Rettro said:
After updating my Pocophone to the latest version, both my mobile data and wifi took a significant hit in speeds, it was able to hit 2.4mbps easily while now it can barely hit 200kbps. Has anyone else experienced this and does anyone have any idea on how to fix this and if not, how do I let Xiaomi know of this so they can fix this?
Click to expand...
Click to collapse
Most probably the OTA update messed it up. Try factory re-setting or a clean flash of the ROM.
In my case, March update had made my mobile data very unreliable. But rebooting the poco fixed it. So try rebooting once if you haven't done that.
Yeah it's been buggy sometimes when I long press wifi icon in the menu it wont do anything
tnsmani said:
Most probably the OTA update messed it up. Try factory re-setting or a clean flash of the ROM.
Click to expand...
Click to collapse
Was hoping it wouldn't have to come to this but might try it. Do you reckon waiting for next months patch would fix it? Is factory resetting my only hope?
lockhrt999 said:
In my case, March update had made my mobile data very unreliable. But rebooting the poco fixed it. So try rebooting once if you haven't done that.
Click to expand...
Click to collapse
I've rebooted it plenty and it doesn't do much. Unless you mean factory resetting like the other lad said.
Rettro said:
Was hoping it wouldn't have to come to this but might try it. Do you reckon waiting for next months patch would fix it? Is factory resetting my only hope?
Click to expand...
Click to collapse
Try a clean flash of the same version of the ROM without wiping internal storage.
tnsmani said:
Try a clean flash of the same version of the ROM without wiping internal storage.
Click to expand...
Click to collapse
I'm quite new to rooting and flashing so could you lend me a hand as to how to approach that? Also, if i choose to wait, is it likely the next months OTA will fix these issues?
Rettro said:
I'm quite new to rooting and flashing so could you lend me a hand as to how to approach that? Also, if i choose to wait, is it likely the next months OTA will fix these issues?
Click to expand...
Click to collapse
If you don't fully understand the process of flashing and the difficulties involved, then it might be better to wait for the update. However, you can learn about the processes in the meanwhile and if the update doesn't solve your issue, then you can try a clean flash of the ROM.
tnsmani said:
If you don't fully understand the process of flashing and the difficulties involved, then it might be better to wait for the update. However, you can learn about the processes in the meanwhile and if the update doesn't solve your issue, then you can try a clean flash of the ROM.
Click to expand...
Click to collapse
Alright, thanks for your help man. I appreciate it