Related
Hi all,
I tried to update my Motorola Moto G 2014, but it showed status 7 error. So I contacted Motorola and they said that I rooted my phone. So I connected my phone to my PC and found supersu246.apk. I never installed this, but I guessed somehow some app rooted my phone once. I began thinking and suspected it was when I was desperate to recover my lost photos and downloaded all sorts of programs (possibly Dr. Phone).
So: I deleted supersu246.apk from my internalized SD card and factory resetted my phone. Status 7 still pops up. How do I fix this? I do not want to have a rooted phone btw.
Should I follow the instructions in this link: https://forum.xda-developers.com/moto-g-2014/general/official-firmware-titan-xt1068-t3312933 or not?
And specifically the Easy installer attached in the first post at the bottom: it says: 'easy installer.zip to flash your firmware in one click. This also has an option lock or unlock bootloader and warning logo fix.'
Android 6.0
Smalband: MSM8626BP_1032.3116.99.00R EMEA_DSDS_CUST
Kernel: 3.4.42-gef77327
[email protected] #1
Wed 6 jan 12:29:54 CST 2016
System: 24.41.34.titan_retaildsds.retaildsdsall.en.03 reteu
Build: MPB24.65-34
BTW I AM A NOOB!!
Anyone?
Come on I really need help!
LXXV* said:
Come on I really need help!
Click to expand...
Click to collapse
May be flashing stock rom solve your problem and you get update.
Ashwinrg said:
May be flashing stock rom solve your problem and you get update.
Click to expand...
Click to collapse
Thank you for you reply!! How do I do that?
LXXV* said:
Thank you for you reply!! How do I do that?
Click to expand...
Click to collapse
May be these site help you.
http://www.droidviews.com/restore-moto-g-2014-to-stock-and-lock-the-bootloader/
Ashwinrg said:
May be these site help you.
http://www.droidviews.com/restore-moto-g-2014-to-stock-and-lock-the-bootloader/
Click to expand...
Click to collapse
I tried it, but it didnt work. It still shows status 7.
Unfortunately, i succeeded after having unlocking the bootloader.. I didnt want to void my warrenty, but now I can update again...
same as suggestion, I will restore stock rom using pc like reset it. I once remove root completely only by flashing entire stock rom
mikasu said:
same as suggestion, I will restore stock rom using pc like reset it. I once remove root completely only by flashing entire stock rom
Click to expand...
Click to collapse
You mean I unlocked the bootloader for nothing? . I couldnt get the software flashed only after unlocking?
U can the follow the procedure outlined here.
https://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682
It will restore your phone to stock software and relock the bootloader, means fully stock.
Hey guys nougat is available to download for axon 7.
A2017U only, of course...
(so far)
Just restored to stock form LeanageOS to give it a spin. Downloading now. Although I saw it on Reddit first ><
I remember lots of people in the other nougat threads that ripped on ZTE saying there's no way it would be ready.. a little late, but not too late. Good job ZTE.
Takenover83 said:
Just restored to stock form LeanageOS to give it a spin. Downloading now. Although I saw it on Reddit first ><
Click to expand...
Click to collapse
Just did the same. Flashed full b29, downloaded update and it failed.
Factory reset, now waiting for download again.
lafester said:
Just did the same. Flashed full b29, downloaded update and it failed.
Factory reset, now waiting for download again.
Click to expand...
Click to collapse
I had the same problem. On my 2nd go around as well. First time I restored B29 from TWRP. After the failed update. I reflashed B29 via the official recovery, and then re-downloaded the Nougate update again. Will update.
Edit: Success.
Takenover83 said:
I had the same problem. On my 2nd go around as well. First time I restored B29 from TWRP. After the failed update. I reflashed B29 via the official recovery, and then re-downloaded the Nougate update again. Will update.
Edit: Success.
Click to expand...
Click to collapse
Nice. almost there myself.
Takenover83 said:
I had the same problem. On my 2nd go around as well. First time I restored B29 from TWRP. After the failed update. I reflashed B29 via the official recovery, and then re-downloaded the Nougate update again. Will update.
Edit: Success.
Click to expand...
Click to collapse
Do you recommend to unlock bootloader before upgrading?
jorch_oc said:
Do you recommend to unlock bootloader before upgrading?
Click to expand...
Click to collapse
Don't know yet. A beta user said all they had to do was go into fastboot and unlock... Hopefully the release build is the same.
So... either wait and see, unlock now, or go for it and be the first to try.
Does nougat have the dreaded power management?
Just tested Daydream a bit. The power button is no longer a problem
But I can't find any options to adjust blur or flicker like in LeanageOS. Also, I still get quiet a bit of drifting to the right. Was hoping Official would help with that, as other fixes/solutions had minimal impact for me.
borijess said:
Does nougat have the dreaded power management?
Click to expand...
Click to collapse
It now has 3 options
Always remind to clean
Auto-clean without reminding
Do not clean
Fastboot doesn't appear to accept any commands unfortunately.
Is this still MiFavour 4.0 or maybe a new version?
4.2
lafester said:
Fastboot doesn't appear to accept any commands unfortunately.
Click to expand...
Click to collapse
Yep, was like grrr when I went to flash twrp.
Takenover83 said:
Yep, was like grrr when I went to flash twrp.
Click to expand...
Click to collapse
So what's the easiest method to install? Trying tennear's tool but I keep getting failed to open recovery.bin.
It came OTA
Could somebody pls pull the ota link?
I can confirm. I am downloading right now. I will try to pull the OTA when it has finished.
So I downloaded the updated firmware for my device (BLA-L29C636) in http://pro-teammt.ru/firmware-database/?firmware_model and flashed it using the method in HuRUpdater. I flashed it using the latest TWRP for my device without any errors. I rebooted my device and it never opens after that. It is just dead. No response when charging. When plugged in PC, it just shows USB SER and I can't boot it to fastboot. Any idea how to revive my phone? Thank you in advance
jronyu said:
So I downloaded the updated firmware for my device (BLA-L29C636) in http://pro-teammt.ru/firmware-database/?firmware_model and flashed it using the method in HuRUpdater. I flashed it using the latest TWRP for my device without any errors. I rebooted my device and it never opens after that. It is just dead. No response when charging. When plugged in PC, it just shows USB SER and I can't boot it to fastboot. Any idea how to revive my phone? Thank you in advance
Click to expand...
Click to collapse
It's hard bricked, no fix u can read here.
https://forum.xda-developers.com/mate-10/help/rebranding-phone-stuck-black-screen-t3783981
Sent from my LON-L29 using XDA Labs
What firmware did you flash? There "may" be hope for you
I flashed BLA-L29C636B138 (8.0.0.138) and got same issue. What hope is there?
Not solitions now..
Same here. Flashed BLA-L29C636B138 and got a dead phone. I had the mainboard changed at service center later
I updated earlier to 137 with success.
jmbenevise said:
Same here. Flashed BLA-L29C636B138 and got a dead phone. I had the mainboard changed at service center later
I updated earlier to 137 with success.
Click to expand...
Click to collapse
In my opinion, you did a mistake by updating to B137 again... most likely, if you update to B138, you will brick again.
It would have been better to update directly to B138, from whatever version you were on.
Pretoriano80 said:
In my opinion, you did a mistake by updating to B137 again... most likely, if you update to B138, you will brick again.
It would have been better to update directly to B138, from whatever version you were on.
Click to expand...
Click to collapse
I will wait a bit with B134, until official comes out...
For now I am happy with TWRP and Magisk, and tomorrow is my summer holidays, so... "dolce farniente"
jmbenevise said:
I will wait a bit with B134, until official comes out...
For now I am happy with TWRP and Magisk, and tomorrow is my summer holidays, so... "dolce farniente"
Click to expand...
Click to collapse
Lol, with "earlier" you meant before bricking, i thought you updated again after you got it back from assistance.?
...
Hi
I can remember exactly. But definetively since a while the fingerprint sensor is not working.
If it was after a update, I cant remember.
And in settings, I do not find any option for the sensor, e.g. adding a fingerprint.
It is EMUI 8 and phone bought in China for much less than 300€ some month ago in summer.
Probably bought a fake rip
Davilince said:
Probably bought a fake rip
Click to expand...
Click to collapse
No, this time no fake
It worked for somes quiet well. Since some weeks, nothing. Probably crappy SW Update, bad quality/test or so...
Small reset didnt helped.
Any other ideas, before try of big reset. Maybe this will help, maybe not. But lot of work to readjust settings...
Michael? said:
No, this time no fake
It worked for somes quiet well. Since some weeks, nothing. Probably crappy SW Update, bad quality/test or so...
Small reset didnt helped.
Any other ideas, before try of big reset. Maybe this will help, maybe not. But lot of work to readjust settings...
Click to expand...
Click to collapse
Try to wipe cache via recovery.
Santi_SAZ said:
Try to wipe cache via recovery.
Click to expand...
Click to collapse
Yeah, sounds like works. At Xiao Mi I was able, did it with several phones.
Ok, first full reset after backup. Still problem, then flash or waiting for next update...
Michael? said:
Yeah, sounds like works. At Xiao Mi I was able, did it with several phones.
Ok, first full reset after backup. Still problem, then flash or waiting for next update...
Click to expand...
Click to collapse
Try downloading last update through erecovery, or contact them
Santi_SAZ said:
Try downloading last update through erecovery, or contact them
Click to expand...
Click to collapse
already on latest EMUI. I even didnt unlock or changed anything. Thats why so disappointed. On Xiao Mi, root, unlock, ... and all worked fine. Here no change in system and xx stuff happens...
Michael? said:
already on latest EMUI. I even didnt unlock or changed anything. Thats why so disappointed. On Xiao Mi, root, unlock, ... and all worked fine. Here no change in system and xx stuff happens...
Click to expand...
Click to collapse
Yeah, is the easiest device to brick it. It bricks itself only watching it.
The eRecovery is a emergency recovery, I never used it, but you can try downloading last update package and flashing it, do a data backup before
Santi_SAZ said:
Yeah, is the easiest device to brick it. It bricks itself only watching it.
The eRecovery is a emergency recovery, I never used it, but you can try downloading last update package and flashing it, do a data backup before
Click to expand...
Click to collapse
no, i didnt brick it.
didnt do any unlock, or so. At Xiao Mi I did, and it worked without problems. Here I didnt do it, because to busy and OTA.
Did now,Factory reset, didnt bring any difference. Still no sensor on the bottom and fingerprint in settings.
Michael? said:
no, i didnt brick it.
didnt do any unlock, or so. At Xiao Mi I did, and it worked without problems. Here I didnt do it, because to busy and OTA.
Did now,Factory reset, didnt bring any difference. Still no sensor on the bottom and fingerprint in settings.
Click to expand...
Click to collapse
Since automatic EMUI check, I am on latest version. I think, if bad SW update I need to go back to older version. But this is difficult?
Any idea when next update is coming?
Michael? said:
Since automatic EMUI check, I am on latest version. I think, if bad SW update I need to go back to older version. But this is difficult?
Any idea when next update is coming?
Click to expand...
Click to collapse
I think, to version downgrade you need a unlocked bootloader, IDK whwn will be the next release, which is your model, C432, C636, C675?
Santi_SAZ said:
Yeah, is the easiest device to brick it. It bricks itself only watching it.
The eRecovery is a emergency recovery, I never used it, but you can try downloading last update package and flashing it, do a data backup before
Click to expand...
Click to collapse
So after hard reset, still ****ty SW or HW.
I dont understand, eRecovery.
I am already on latest EMUI. Even got update this week, but only security.... and security not so helpful currently, if phone not working so nice
Michael? said:
So after hard reset, still ****ty SW or HW.
I dont understand, eRecovery.
I am already on latest EMUI. Even got update this week, but only security.... and security not so helpful currently, if phone not working so nice
Click to expand...
Click to collapse
https://www.reddit.com/r/Huawei/comments/8yge1t/huawei_erecovery/
Santi_SAZ said:
https://www.reddit.com/r/Huawei/comments/8yge1t/huawei_erecovery/
Click to expand...
Click to collapse
BKL-AL00
reddet link i dont have that things there.
.reboot
.wipe da/factory reset (borh dones, stays with last SW version)
.wipe cache partition (no effect)
Hi guys, I broke my fingerprint when I replaced my lcd, meanwhile I received the update to EMUI 9. Ordered a new fingerprint, put it on place and nothing appears on the option. I thought that the fingerprint came damaged so I have ordered a new one. Put it in place and nothing again. Any ideas to get it work on EMUI 9 or we have to go back to the EMUI 8? Thanks guys
Madureira29 said:
Hi guys, I broke my fingerprint when I replaced my lcd, meanwhile I received the update to EMUI 9. Ordered a new fingerprint, put it on place and nothing appears on the option. I thought that the fingerprint came damaged so I have ordered a new one. Put it in place and nothing again. Any ideas to get it work on EMUI 9 or we have to go back to the EMUI 8? Thanks guys
Click to expand...
Click to collapse
Same happened with me but my sensor worked. Could've the supplier you're buying from
Santi_SAZ said:
I think, to version downgrade you need a unlocked bootloader, IDK whwn will be the next release, which is your model, C432, C636, C675?
Click to expand...
Click to collapse
Sorry, wasnt here for a while.
After big FW updrade, still no function. And still anoying chinese app, and too much Honor spam help/AI, whatever...
But I figured out, Cyanogen Mod available, yeah.
Am I right?
https://www.cyanogenmods.org/lineag...or_Lineage_OS_16_Android_90_Pie_Download_list
BKL-AL00 is what is written on the back of the case.
Shall I try it?
Maybe fingerprint returns, at least new FW.
Michael? said:
Sorry, wasnt here for a while.
After big FW updrade, still no function. And still anoying chinese app, and too much Honor spam help/AI, whatever...
But I figured out, Cyanogen Mod available, yeah.
Am I right?
https://www.cyanogenmods.org/lineag...or_Lineage_OS_16_Android_90_Pie_Download_list
BKL-AL00 is what is written on the back of the case.
Shall I try it?
Maybe fingerprint returns, at least new FW.
Click to expand...
Click to collapse
If you had a big FW and it didn't solve it, seems your fringerprint is broken
CyanogenMod is dead, now is LineageOS, you can try it, but if your sensor is fisically broken any ROM can bring it to life.
Santi_SAZ said:
If you had a big FW and it didn't solve it, seems your fringerprint is broken
CyanogenMod is dead, now is LineageOS, you can try it, but if your sensor is fisically broken any ROM can bring it to life.
Click to expand...
Click to collapse
yeah, agree. I forgot it.
but no fingerprint is not really annoying. in the next phone i could even renounce on it.
But interestingly (as u have maybe seens in the link) they are still bringing updates .... Even supporting Mi8 , as lineagoe.
So, better not to install it?
I would be even bit happier if I get rid of the original OS from honor...
Michael? said:
yeah, agree. I forgot it.
but no fingerprint is not really annoying. in the next phone i could even renounce on it.
But interestingly (as u have maybe seens in the link) they are still bringing updates .... Even supporting Mi8 , as lineagoe.
So, better not to install it?
I would be even bit happier if I get rid of the original OS from honor...
Click to expand...
Click to collapse
You can try it if you want, I think it wouldn't fix the fringerprint sensor.
First read the whole thread about LOS first before do anything https://forum.xda-developers.com/honor-view-10/development/rom-lineageos-16-0-t3876509
Here is the link to download https://download.lineageos.org/berkeley
My Device was on firmware version RMX2202_11.C.15 GDPR, it wasnt the latest one and software update wasn't pushing the latest ota package for my device which is RMX2202_11.C.25 GDPR.
So, i decided to rollback to RUI2.0 and update again and that might solve the problem. i unlocked my bootloader, booted on twrp, flashed rollback "RMX2202_11.A.17 GDPR" package, wipe data, boot into system.
All good till now, software update pushed me 700MB ota package, i download and installed it. Device asks for reboot i rebooted my device , device went off. DEAD no sign of life. only EDL MODE.
no recovery, no bootloader, no vibrate , no bootloop , completely DEAD. Then i took it to realme service center, they tried to flash my device , they got some error they returned my phone and said we cant repair because your device is rejecting firmware.
i attached the msm tool error. (WCSM communication failed (WCSM code: 4009 SW version of this package is not found in WCSM.)
PLEASE HELP ME!
Try to Change A computer?
DestoryG said:
Try to Change A computer?
Click to expand...
Click to collapse
i tried from different computers. 4 5 may be
Can i try with your phone ?
xuanhoang1811 said:
Can i try with your phone ?
Click to expand...
Click to collapse
Thanks for your reply.
I fixed my phone with the help of some technician online, he successfully flashed c.15 firmware using oplus flash tool v4.1.0.
Thank god and thanks to technician, my phone came back to life again.
But still my phone's software update is not pushing ota package. If you have solution please suggest me.
XxMinixX said:
View attachment 5766719
Click to expand...
Click to collapse
Mine still stuck at 11.c.05 i use this phone for about 3 months but still no updates
XxMinixX said:
Mine still stuck at 11.c.05 i use this phone for about 3 months but still no updates
Click to expand...
Click to collapse
i am able to update my phone to the latest ota. i can help you if you want
Ashim Adhikari said:
Thanks for your reply.
I fixed my phone with the help of some technician online, he successfully flashed c.15 firmware using oplus flash tool v4.1.0.
Thank god and thanks to technician, my phone came back to life again.
But still my phone's software update is not pushing ota package. If you have solution please suggest me.
Click to expand...
Click to collapse
Can you recommend me your technician? My GT is stuck in boot loop. Technician here says it has no recovery or something similar, and is still waiting for a recovery file for GT for it to be fixed. Thanks!
vlmapalo said:
Can you recommend me your technician? My GT is stuck in boot loop. Technician here says it has no recovery or something similar, and is still waiting for a recovery file for GT for it to be fixed. Thanks!
Click to expand...
Click to collapse
his website is MOD EDIT: URL REMOVED | READ AND FOLLOW XDA FORUM RULES
Ashim Adhikari said:
his website is https://www.kreatifintech.com/
Click to expand...
Click to collapse
paid service advertising, you have been reported
Ashim Adhikari said:
his website is MOD EDIT: URL REMOVED | READ AND FOLLOW XDA FORUM RULES
Click to expand...
Click to collapse
All this thread maked for advertise some indian guys)))