Bricked Mate 10 Pro after using HuRUpdater - Huawei Mate 10 Questions & Answers

So I downloaded the updated firmware for my device (BLA-L29C636) in http://pro-teammt.ru/firmware-database/?firmware_model and flashed it using the method in HuRUpdater. I flashed it using the latest TWRP for my device without any errors. I rebooted my device and it never opens after that. It is just dead. No response when charging. When plugged in PC, it just shows USB SER and I can't boot it to fastboot. Any idea how to revive my phone? Thank you in advance

jronyu said:
So I downloaded the updated firmware for my device (BLA-L29C636) in http://pro-teammt.ru/firmware-database/?firmware_model and flashed it using the method in HuRUpdater. I flashed it using the latest TWRP for my device without any errors. I rebooted my device and it never opens after that. It is just dead. No response when charging. When plugged in PC, it just shows USB SER and I can't boot it to fastboot. Any idea how to revive my phone? Thank you in advance
Click to expand...
Click to collapse
It's hard bricked, no fix u can read here.
https://forum.xda-developers.com/mate-10/help/rebranding-phone-stuck-black-screen-t3783981
Sent from my LON-L29 using XDA Labs

What firmware did you flash? There "may" be hope for you

I flashed BLA-L29C636B138 (8.0.0.138) and got same issue. What hope is there?

Not solitions now..

Same here. Flashed BLA-L29C636B138 and got a dead phone. I had the mainboard changed at service center later
I updated earlier to 137 with success.

jmbenevise said:
Same here. Flashed BLA-L29C636B138 and got a dead phone. I had the mainboard changed at service center later
I updated earlier to 137 with success.
Click to expand...
Click to collapse
In my opinion, you did a mistake by updating to B137 again... most likely, if you update to B138, you will brick again.
It would have been better to update directly to B138, from whatever version you were on.

Pretoriano80 said:
In my opinion, you did a mistake by updating to B137 again... most likely, if you update to B138, you will brick again.
It would have been better to update directly to B138, from whatever version you were on.
Click to expand...
Click to collapse
I will wait a bit with B134, until official comes out...
For now I am happy with TWRP and Magisk, and tomorrow is my summer holidays, so... "dolce farniente"

jmbenevise said:
I will wait a bit with B134, until official comes out...
For now I am happy with TWRP and Magisk, and tomorrow is my summer holidays, so... "dolce farniente"
Click to expand...
Click to collapse
Lol, with "earlier" you meant before bricking, i thought you updated again after you got it back from assistance.?

...

Related

stuck on logo

I've got a serious problem here
i just bought a honor 5x kiw l21 used phone
it was rooted and it had twrp recovery installed by the original user
so when i got it , there was a 4.0 update that i tried to install too many times without success
in the last time it stucked at the honor powered by android logo
i return the recovery to the stock one and tried to flash a 4.0 frameware but its stuck on 0%
im using the middle east version of the phone
any ideas :crying:
hseen01 said:
I've got a serious problem here
i just bought a honor 5x kiw l21 used phone
it was rooted and it had twrp recovery installed by the original user
so when i got it , there was a 4.0 update that i tried to install too many times without success
in the last time it stucked at the honor powered by android logo
i return the recovery to the stock one and tried to flash a 4.0 frameware but its stuck on 0%
im using the middle east version of the phone
any ideas :crying:
Click to expand...
Click to collapse
You should only try to update EMUI if you have stock recovery installed, no TWRP. Otherwise it will really fail. Download a full firmware for your phone, use Huawei Update Extractor to extract system.img, boot.img and recovery.img
Flash them using fastboot.
tried that without success
hseen01 said:
tried that without success
Click to expand...
Click to collapse
What errors did you faced?
Sent from my Galaxy Tab 3 using XDA Labs
stuck on bootloop
hseen01 said:
stuck on bootloop
Click to expand...
Click to collapse
I mean what errors did you faced in fastboot.
Sent from my honor 5X using XDA Labs
didn't face any problem with fastboot
Stuck on bootloop
hseen01 said:
stuck on bootloop
Click to expand...
Click to collapse
Did you root your device? If so, we're sorry to inform you, but that voids our Limited Warranty (http://www.hihonor.com/us/limited-warranty/index.html). We only cover devices that are within the parameters. We advise taking your device to a third-party repair center to get it fixed. If you didn't root your device, we advise contacting our team at 1-844-524-6667 to get your warranty process started. (ED)
HonorUSA_Eric said:
Did you root your device? If so, we're sorry to inform you, but that voids our Limited Warranty (http://www.hihonor.com/us/limited-warranty/index.html). We only cover devices that are within the parameters. We advise taking your device to a third-party repair center to get it fixed. If you didn't root your device, we advise contacting our team at 1-844-524-6667 to get your warranty process started. (ED)
Click to expand...
Click to collapse
He clearly said in the first post that he purchased the phone used and it was already rooted.
He also tried to update the phone while it was rooted. Why not point him to the 5x file depot to fix his problem instead of tell him he broke the warranty ?
clsA said:
He clearly said in the first post that he purchased the phone used and it was already rooted.
He also tried to update the phone while it was rooted. Why not point him to the 5x file depot to fix his problem instead of tell him he broke the warranty ?
Click to expand...
Click to collapse
Because he's an employee of Honor bro. Hahaha.
Sent from my Galaxy Tab 3 using XDA Labs
it worked i just bought an sd card and got the update in it and pressed volume up/down and power key and the update started

Phone stuck in bootloop for no apparent reason.

So recently, my phone went into bootloop for no reason. I was using stock firmware, no root or modifications of any sort.
I'm not able to access recovery mode, boot the phone(in safe mode as well). The only screen I was able to get to was download mode.
However, I don't want to flash custom firmware on it because that would make me lose my data.
Help of any kind to help me backup my files or fix the problem would be appreciated.
UPDATE: I was able to install TWRP onto the phone, but it freezes after the first of seconds of boot.
Is there any important data on the phone? If not, did u factory reset it?
Akshat2100 said:
Is there any important data on the phone? If not, did u factory reset it?
Click to expand...
Click to collapse
There's a lot of important data on the phone. I can't possibly lose it.
aryan.arora180 said:
There's a lot of important data on the phone. I can't possibly lose it.
Click to expand...
Click to collapse
Did you flash the correct version of twrp?
callumbr1 said:
Did you flash the correct version of twrp?
Click to expand...
Click to collapse
Yeah, I even tried multiple versions of TWRP. I tried arter97's TWRP recovery as well and it didn't freeze but it wasn't performing any opeartions(factory reset, installing ROMs, MTP)
aryan.arora180 said:
Yeah, I even tried multiple versions of TWRP. I tried arter97's TWRP recovery as well and it didn't freeze but it wasn't performing any opeartions(factory reset, installing ROMs, MTP)
Click to expand...
Click to collapse
V 3.1.1-0 is the correct version.
Have you tried flashing stock firmware?
callumbr1 said:
V 3.1.1-0 is the correct version.
Have you tried flashing stock firmware?
Click to expand...
Click to collapse
I tried flashing stock firmware as well. It ends up in a bootloop only.
aryan.arora180 said:
I tried flashing stock firmware as well. It ends up in a bootloop only.
Click to expand...
Click to collapse
Sounds like your flashing the wrong firmware. What's your model? G925? And Android version and region?
callumbr1 said:
Sounds like your flashing the wrong firmware. What's your model? G925? And Android version and region?
Click to expand...
Click to collapse
It's the G925I - the international variant. I bought the phone in India and it was latest on nougat.
Should I restore the Marshamllow version instead?
aryan.arora180 said:
It's the G925I - the international variant. I bought the phone in India and it was latest on nougat.
Should I restore the Marshamllow version instead?
Click to expand...
Click to collapse
http://updato.com/firmware-archive-select-model?record=304ED2348A3811E7963AFA163EE8F90B
Try this one first mate
callumbr1 said:
http://updato.com/firmware-archive-select-model?record=304ED2348A3811E7963AFA163EE8F90B
Try this one first mate
Click to expand...
Click to collapse
Sure, I'll try it out.
callumbr1 said:
http://updato.com/firmware-archive-select-model?record=304ED2348A3811E7963AFA163EE8F90B
Try this one first mate
Click to expand...
Click to collapse
Hey sorry for the late reply... I had to travel and bought the OP5 in a hurry.
Tried flashing the firmware you gave, but it had the same result - bootloop.
Any luck? Mine just did the same thing this morning. To be a little more clear, my ph-1 (USA, Sprint purchased) ran the battery out last night. When I plugged it in, it bootlooped. I entered boot loader and shut it down. Fast forward - charged all night, no difference. Bootloader is locked and there is no recovery (phone hasn't been modified at all, unless you count Holy Diver as a ring tone
CtDMonet said:
Any luck? Mine just did the same thing this morning. To be a little more clear, my ph-1 (USA, Sprint purchased) ran the battery out last night. When I plugged it in, it bootlooped. I entered boot loader and shut it down. Fast forward - charged all night, no difference. Bootloader is locked and there is no recovery (phone hasn't been modified at all, unless you count Holy Diver as a ring tone
Click to expand...
Click to collapse
Sorry for the late reply.
I gave it to a service center. They simply replaced the battery and it was working fine for a day. The next day the same things started happening again, and I sent it back to them.

HELP! Bricked my Honor 8 after an EMUI update

The other day I woke up and saw the notification for an EMUI update so I proceeded to install it. It downloaded and installed correctly. However, when it rebooted, it booted into Huawei eRecovery. I tried to restore using WiFi with no success. I tried clearing my cache and doing a factory reset with no success either.
Can you guys help me? Thanks a lot.
Try factory reset again and wait till the phone boots up or runs out of battery, worked for me once.
Augustoandro said:
Try factory reset again and wait till the phone boots up or runs out of battery, worked for me once.
Click to expand...
Click to collapse
It didn't work. Any other ideas?
Reinstall your firmware
Viruz said:
Reinstall your firmware
Click to expand...
Click to collapse
I don't know which firmware I had. Is there any way to know that? I never rooted the phone, so it must be the official firmware. Is there any site to look up for that? I searched and didn't find anything, but I'm really new to all of this.
K no problem , download official firmware and flash It
link : http://huawei-firmware.com/rom/huawei-honor-8/frdl02/1616
Viruz said:
K no problem , download official firmware and flash It
link : http://huawei-firmware.com/rom/huawei-honor-8/frdl02/1616
Click to expand...
Click to collapse
Thanks for the reply. Before I try this I have a couple of questions. Doing this voids the warranty? Would I get notifications for new android/emui updates like before?
Ya your warranty is void .
You will definitely get emui updates in notification.
If you don't want that update simply ignore it
Viruz said:
Ya your warranty is void .
You will definitely get emui updates in notification.
If you don't want that update simply ignore it
Click to expand...
Click to collapse
Sorry for answering so late, but I hadn't time to try this until now.
It didn't work, any more ideas?

Dead/bricked infinix hot 4 pro (x556)

A friend of mine gave me a rooted infinix X556 (Hot 4 Pro) to unroot for him
I actually had in mind to just flash it, knowing well that it'll take care of both the rooting and ROM issues.
But in the process checking the root, I got to know that TWRP Recovery was used for the rooting.
I later got it successfully unrooted, and I tried to get rid of the TWRP by flashing just only the Recovery, but it wasn't just going through.
My friend collected the phone and was using it, Having been wiped with TWRP.
But after some days later, he came back with the phone, as it can only boot to the TWRP (It was even showing in the TWRP that NO OS Installed). He got the phone into that situation by trying to use TWRP to do a factory reset.
So, when I later collected phone, The initial OS version that actually came with the phone was X556-H371A-N-170926V157.
But I successfully flashed X556-H371A1-M-160906V70 MT6737M, using flashtool 5.1640, After the flashing, the phone couldn't power on again, and that's where the bulk of the problem is now.
Now it seems the phone to have been bricked, Guys, Please, how can I succesfully unbrick it and bring it back to life?
Thanks in advance.
wilfem said:
A friend of mine gave me a rooted infinix X556 (Hot 4 Pro) to unroot for him
I actually had in mind to just flash it, knowing well that it'll take care of both the rooting and ROM issues.
But in the process checking the root, I got to know that TWRP Recovery was used for the rooting.
I later got it successfully unrooted, and I tried to get rid of the TWRP by flashing just only the Recovery, but it wasn't just going through.
My friend collected the phone and was using it, Having been wiped with TWRP.
But after some days later, he came back with the phone, as it can only boot to the TWRP (It was even showing in the TWRP that NO OS Installed). He got the phone into that situation by trying to use TWRP to do a factory reset.
So, when I later collected phone, The initial OS version that actually came with the phone was X556-H371A-N-170926V157.
But I successfully flashed X556-H371A1-M-160906V70 MT6737M, using flashtool 5.1640, After the flashing, the phone couldn't power on again, and that's where the bulk of the problem is now.
Now it seems the phone to have been bricked, Guys, Please, how can I succesfully unbrick it and bring it back to life?
Thanks in advance.
Click to expand...
Click to collapse
If you cant go into DOWNLOAD, RECOVERY, FASTBOOT IT MEANS THAT YOUR PHONE IS AS GOOD AS A BRICK NOW AND IT CANNOT BE RECOVERED IN ANY WAY WHATSOEVER!!
x.ak**** said:
If you cant go into DOWNLOAD, RECOVERY, FASTBOOT IT MEANS THAT YOUR PHONE IS AS GOOD AS A BRICK NOW AND IT CANNOT BE RECOVERED IN ANY WAY WHATSOEVER!!
Click to expand...
Click to collapse
Really? But all of these were working before the flashing, and what actually baffled me is that the flashing I did on it went through and I'm just wondering what the problem could be.
So you mean there's no solution whatsoever to this?
wilfem said:
Really? But all of these were working before the flashing, and what actually baffled me is that the flashing I did on it went through and I'm just wondering what the problem could be.
So you mean there's no solution whatsoever to this?
Click to expand...
Click to collapse
If you can't do anything on that device except for charging then sorry no CHANCES OF RECOVERY!!
Sent from my One Plus 5T using XDA-Developers Legacy app
x.ak**** said:
If you can't do anything on that device except for charging then sorry no CHANCES OF RECOVERY!!
Sent from my One Plus 5T using XDA-Developers Legacy app
Click to expand...
Click to collapse
It's not even showing any sign of charging when it's connected to the charger, but makes this continous 'disconnection sound' when connected to the PC.
wilfem said:
It's not even showing any sign of charging when it's connected to the charger, but makes this continous 'disconnection sound' when connected to the PC.
Click to expand...
Click to collapse
no chances of recovery its good as a brick!
Sent from my One Plus 5T using XDA-Developers Legacy app
x.ak**** said:
no chances of recovery its good as a brick!
Sent from my One Plus 5T using XDA-Developers Legacy app
Click to expand...
Click to collapse
Well, I thank God I didn't relent on my own effort by not giving up on the phone as you have already condemned it.
I later used Infinix Flash tool to flash the same firmware I flashed with SP flash tool, and now the phone is up and running well.
So, please, I'll urge you not to be too quick to jump into conclusions.
Thanks
wilfem said:
Well, I thank God I didn't relent on my own effort by not giving up on the phone as you have already condemned it.
I later used Infinix Flash tool to flash the same firmware I flashed with SP flash tool, and now the phone is up and running well.
So, please, I'll urge you not to be too quick to jump into conclusions.
Thanks
Click to expand...
Click to collapse
Wow That's some serious effort by you, but the situation you made, confirmed that your phone was hard bricked!
As far as my knowledge went I considered the following facts mentioned on Quora.com and confirmed that your device is HARD BRICKED!
QUORA said:
Hard Brick: All your device does is showing you a black or grey screen and keeps vibrating without any display.
Sometimes all you see is the RED charging light, and nothing else on the screen.
Click to expand...
Click to collapse
So instead of being all aggressive and trying to show me down! Try to be considering and help in expanding my knowledge too.
Lol
Chaim Potok said:
As a species we are always hungry for new knowledge.
-Chaim Potok
Click to expand...
Click to collapse
Sent from my One Plus 5T using XDA-Developers Legacy app
x.ak**** said:
Wow That's some serious effort by you, but the situation you made, confirmed that your phone was hard bricked!
As far as my knowledge went I considered the following facts mentioned on Quora.com and confirmed that your device is HARD BRICKED!
So instead of being all aggressive and trying to show me down! Try to be considering and help in expanding my knowledge too.
Lol
Sent from my One Plus 5T using XDA-Developers Legacy app
Click to expand...
Click to collapse
What I only observed is that it's like the Infinix Flash Tool is a bit better than the normal SP Flash tool, because the same firmware I flashed, which made the phone dead, was the same one I flashed on Infinix flash tool, which later made it work.
All the same. I appreciate your efforts.
Thanks so much
wilfem said:
What I only observed is that it's like the Infinix Flash Tool is a bit better than the normal SP Flash tool, because the same firmware I flashed, which made the phone dead, was the same one I flashed on Infinix flash tool, which later made it work.
All the same. I appreciate your efforts.
Thanks so much
Click to expand...
Click to collapse
Love you bro
#nohomo
Sent from my One Plus 5T using XDA-Developers Legacy app
how to unbrick my infinix hot 4 lite
hello,
i have flashed my infinix x557 with the wrong flash, now my device is no more undetectable, i tried to upgrade the right firmeware from sd card by recovery menu but it stops during process and return to "no commands" logo, is there anyone can help me to solve this problem please....!
How did you make the phone start again?
I have the same problem and i tried what you did but everytime i get an error: brom error s_brom_cmd_startcmd_fail (2005) power up too early
Can you help me please??
wilfem said:
Well, I thank God I didn't relent on my own effort by not giving up on the phone as you have already condemned it.
I later used Infinix Flash tool to flash the same firmware I flashed with SP flash tool, and now the phone is up and running well.
So, please, I'll urge you not to be too quick to jump into conclusions.
Thanks
Click to expand...
Click to collapse
Well u really try hard to fix it bro well done. But what firmware version and tool version u used to unbricked the device i have same phone and same problem. Thanks

Question RMX2202 (REALME GT 5G) IS COMPLETELY DEAD.

My Device was on firmware version RMX2202_11.C.15 GDPR, it wasnt the latest one and software update wasn't pushing the latest ota package for my device which is RMX2202_11.C.25 GDPR.
So, i decided to rollback to RUI2.0 and update again and that might solve the problem. i unlocked my bootloader, booted on twrp, flashed rollback "RMX2202_11.A.17 GDPR" package, wipe data, boot into system.
All good till now, software update pushed me 700MB ota package, i download and installed it. Device asks for reboot i rebooted my device , device went off. DEAD no sign of life. only EDL MODE.
no recovery, no bootloader, no vibrate , no bootloop , completely DEAD. Then i took it to realme service center, they tried to flash my device , they got some error they returned my phone and said we cant repair because your device is rejecting firmware.
i attached the msm tool error. (WCSM communication failed (WCSM code: 4009 SW version of this package is not found in WCSM.)
PLEASE HELP ME!
Try to Change A computer?
DestoryG said:
Try to Change A computer?
Click to expand...
Click to collapse
i tried from different computers. 4 5 may be
Can i try with your phone ?
xuanhoang1811 said:
Can i try with your phone ?
Click to expand...
Click to collapse
Thanks for your reply.
I fixed my phone with the help of some technician online, he successfully flashed c.15 firmware using oplus flash tool v4.1.0.
Thank god and thanks to technician, my phone came back to life again.
But still my phone's software update is not pushing ota package. If you have solution please suggest me.

			
				
XxMinixX said:
View attachment 5766719
Click to expand...
Click to collapse
Mine still stuck at 11.c.05 i use this phone for about 3 months but still no updates
XxMinixX said:
Mine still stuck at 11.c.05 i use this phone for about 3 months but still no updates
Click to expand...
Click to collapse
i am able to update my phone to the latest ota. i can help you if you want
Ashim Adhikari said:
Thanks for your reply.
I fixed my phone with the help of some technician online, he successfully flashed c.15 firmware using oplus flash tool v4.1.0.
Thank god and thanks to technician, my phone came back to life again.
But still my phone's software update is not pushing ota package. If you have solution please suggest me.
Click to expand...
Click to collapse
Can you recommend me your technician? My GT is stuck in boot loop. Technician here says it has no recovery or something similar, and is still waiting for a recovery file for GT for it to be fixed. Thanks!
vlmapalo said:
Can you recommend me your technician? My GT is stuck in boot loop. Technician here says it has no recovery or something similar, and is still waiting for a recovery file for GT for it to be fixed. Thanks!
Click to expand...
Click to collapse
his website is MOD EDIT: URL REMOVED | READ AND FOLLOW XDA FORUM RULES
Ashim Adhikari said:
his website is https://www.kreatifintech.com/
Click to expand...
Click to collapse
paid service advertising, you have been reported
Ashim Adhikari said:
his website is MOD EDIT: URL REMOVED | READ AND FOLLOW XDA FORUM RULES
Click to expand...
Click to collapse
All this thread maked for advertise some indian guys)))

Categories

Resources