Hello if there is anyone out there who can help I recently switched out my screen on my lgv30+ ls998 and for some reason my loud speaker doesn't work. I've ordered another one off ebay and that one didn't work either. Not sure what's going on. The pins look like they are touching the correct places.
I'm not sure how relevant it is, but when putting the ZTE Axon 7 back together I put in the speaker backwards (really hard to tell) and it (obviously) didn't work. Screw around with the orientation and see if things change?
The LG v30 has a contact pin situation with almost all of the hardware components including the speakers which makes it easy to put in and out. I just can't understand y the speaker isn't working out of all things. I tried to finesse the placement of the pins a little but still nothing. I just keep getting an extremely faint crackling noise from it
Mikalhicks7 said:
The LG v30 has a contact pin situation with almost all of the hardware components including the speakers which makes it easy to put in and out. I just can't understand y the speaker isn't working out of all things. I tried to finesse the placement of the pins a little but still nothing. I just keep getting an extremely faint crackling noise from it
Click to expand...
Click to collapse
Did you ever find a solution to this issue?
I replaced the screen and frame on my LG V30 a couple of days ago and I am having the exact same problem.
Related
At first couple days I did not notice this issue, yesterday I found the the sound from the right speaker is louder than the left one. Anyone has the same feeling? I'm not sure if it is a problem with the hardware or the software.
I did notice something like that yesterday. Don't know if it was what I was watching, or if it was the Tablet, but it does warrant some more investigation.
xddy1979 said:
At first couple days I did not notice this issue, yesterday I found the the sound from the right speaker is louder than the left one. Anyone has the same feeling? I'm not sure if it is a problem with the hardware or the software.
Click to expand...
Click to collapse
I can say I don't have this issue. I had originally thought mine was the other way around but then realized it was my audio source, sounds balanced now.
Have you checked with earbuds to make sure that it's really a problem? I've found that not only where I hold the tablet in relation to the side speakers will effect the perceived balance, but also how I hold my hands which changes how sound reflects off them thus changing the perceived sound balance.
Earbuds worked with no problems. I'm thinking it should be the speakers' issue.
lpsisrl said:
Have you checked with earbuds to make sure that it's really a problem? I've found that not only where I hold the tablet in relation to the side speakers will effect the perceived balance, but also how I hold my hands which changes how sound reflects off them thus changing the perceived sound balance.
Click to expand...
Click to collapse
My sound is off, but that was after I opened up my device. The speaker wire is close to the edge and are a bit flimsy - just moving them slightly seems to affect the volume. Could be a hardware defect that affects some devices more than others, that's my guess.
At one point, I had actually put some electrical tape over one speaker as my "DIY" volume reduction fix.
I've had my gtablet for about five days. The left speaker would sometimes work, but mostly would not. I tried different ROMs, different media players. Earphones worked perfectly. Sending it back for a replacement... I'll just end up breaking something else if I open the thing up, lol.
So I dropped my phone and the screen cracked. No biggie as I am fairly handy. Bought a new digitizer and replaced it. All the functions work... that is until I try and make a phone call. No voice registers. Try and use the voice command option and it doesn't hear anything. Ok, so I need a $5 mic from ebay. I think it goes deeper than this. When I make the phone call the screen automatically goes black and I can't get it to come back up until the call ends. I made a phone call and swear I can hear a faint echo of my voice in the earpiece. I've had it apart half a dozen times or more checking everything. It all looks good. I think the phone is only like 2 months old so I'm not even sure if there's a warranty on it, especially now that I've replaced the screen. Any help on this is greatly appreciated. Thanks for reading.
Sycoholic said:
So I dropped my phone and the screen cracked. No biggie as I am fairly handy. Bought a new digitizer and replaced it. All the functions work... that is until I try and make a phone call. No voice registers. Try and use the voice command option and it doesn't hear anything. Ok, so I need a $5 mic from ebay. I think it goes deeper than this. When I make the phone call the screen automatically goes black and I can't get it to come back up until the call ends. I made a phone call and swear I can hear a faint echo of my voice in the earpiece. I've had it apart half a dozen times or more checking everything. It all looks good. I think the phone is only like 2 months old so I'm not even sure if there's a warranty on it, especially now that I've replaced the screen. Any help on this is greatly appreciated. Thanks for reading.
Click to expand...
Click to collapse
Hello, I am having the exact same problem on my friends Radar. Did you ever figure it out? where did you buy the digitizer, Ebay? Thanks!
ashton4life said:
Hello, I am having the exact same problem on my friends Radar. Did you ever figure it out? where did you buy the digitizer, Ebay? Thanks!
Click to expand...
Click to collapse
For the Radar, it is very easy to damage the mic flex if you don't remove it prior to removing the outer housing of the phone, and also if you don't install it after installing the housing again. There is very little clearance when levering the housing off of the board/lcd, so if the flex is not removed, it can crease, causing the internal wires of the flex to be damaged.
Regarding the screen going black, this is usually caused by a fault or blocked proximity sensor, or sometimes a missing grommet that goes around the sensor to block extraneous light from interfering with the sensor. I suggest double checking to make sure that nothing is blocking the sensor, that the sensor is not damaged or unplugged in any way, and that any grommet that was originally there is still there.
I have a Radar open in front of me right now and it is supposed to have a grommet around the proximity sensor, so if you happened to have lost it or threw it away with the old digitizer, you might be out of luck. Try to find some way to separate the transmitting and recieving components of the sensor so that they can't interfere with eachother (so that the light emitted by the transmitter doesn't immediately reflect off of the digitizer and back into the reciever).
Kind of hard to explain, sorry.
So i got the htc one on monday and sometimes when i receive or make a call the people on the other end tell me that they can't hear me or they hear me far from the phone. has anyone noticed this problem ? could this be a mic problem ???
iamfightaa said:
So i got the htc one on monday and sometimes when i receive or make a call the people on the other end tell me that they can't hear me or they hear me far from the phone. has anyone noticed this problem ? could this be a mic problem ???
Click to expand...
Click to collapse
Same issue here. It's like I'm getting muted for a second when talking.
Just throwing this out there, and it might not apply at all, but are you sure your fingers aren't covering up the mic when you're on a call? The Note II that I have has a mic vent right near where I normally place my finger and I was muting myself a lot when I first got the device.
My pinky finger was the culprit.
No mic issue here, but you may want to talk it back to T-Mobile and ask for a replacement
craighwk said:
Just throwing this out there, and it might not apply at all, but are you sure your fingers aren't covering up the mic when you're on a call? The Note II that I have has a mic vent right near where I normally place my finger and I was muting myself a lot when I first got the device.
My pinky finger was the culprit.
Click to expand...
Click to collapse
Mine too. I'm left handed. I wish they put the mic in the middle.
craighwk said:
Just throwing this out there, and it might not apply at all, but are you sure your fingers aren't covering up the mic when you're on a call? The Note II that I have has a mic vent right near where I normally place my finger and I was muting myself a lot when I first got the device.
My pinky finger was the culprit.
Click to expand...
Click to collapse
Not the case, i'll call t-mo this evening.I was wondering if they will be able to replace it at a store ?
I just got off the phone with someone and whenever I put my phone between my shoulder and my cheek to talk they couldn't hear me or complained that it sounded like I was far or maybe looking at my phone. However, when I put the phone back up right as it should be it was fine.
This is weird...
No mic problems here. My gf & I confirmed with my HTC One and her One S.
nKiwan said:
I just got off the phone with someone and whenever I put my phone between my shoulder and my cheek to talk they couldn't hear me or complained that it sounded like I was far or maybe looking at my phone. However, when I put the phone back up right as it should be it was fine.
This is weird...
Click to expand...
Click to collapse
Same here, mine just doesn't work fine in any position, i called t-mo and the rep told me they can't replace it yet as they don't have the "send a replacement" option on the system, i'll go to a store tomorrow to try some luck if not i'll wait a few days and call again.
I've just had complaints while laying down... hold the phone in the exact same position hand-to-head, but laying down I am told I sound far away, standing I sound normal. I made sure not to cover either mic. I never had any such problems with any phone before.
So are any of you covering the hole in the BACK of the phone?? This is a wonderful noise monitoring sensor that will increase or decrease Mic and call volume depending on what it hears. This is mist likely the case for when it is against your shoulder and cheek. I'd check to make sure you're not covering it up.
Sent from my HTC One using Tapatalk 2
rpmccormick said:
I made sure not to cover either mic.
Click to expand...
Click to collapse
No, I was not covering the one on the back.
So i called t-mo and spoke to several reps and they all told me that they don't have the form to send a replacement for this phone yet, i also went to 2 t-mo stores and no luck.I called htc directly and they can't replace the form they can only issue repair tickets which can take 2-3 weeks so no thx, so i just went ahead and unlocked the device and tried several roms and kernels from the international device and no luck, it seems to mic lowers itself when you move the device or something.. so frustrating.
iamfightaa said:
So i called t-mo and spoke to several reps and they all told me that they don't have the form to send a replacement for this phone yet, i also went to 2 t-mo stores and no luck.I called htc directly and they can't replace the form they can only issue repair tickets which can take 2-3 weeks so no thx, so i just went ahead and unlocked the device and tried several roms and kernels from the international device and no luck, it seems to mic lowers itself when you move the device or something.. so frustrating.
Click to expand...
Click to collapse
You might have a lemon. But my mic is perfect on my H1.
J-Hop2o6 said:
You might have a lemon. But my mic is perfect one my H1.
Click to expand...
Click to collapse
fml
maybe a case would help?
A case may help to lift fingers and other hand parts away from the microphone, as a long-term solution for non-hardware-related problems.
I noticed muffled call quality as well and think it might be a defect. I noticed an issue also when I tried testing out the video quality and recorded a song playing from my stereo system. After recording it, I noticed almost all of the sound was on the left channel, and the right channel was almost non-existent. I uploaded the video to my computer to hear it and noticed the same issue - the left earphone was loud and clear, the right was very quiet.
EDIT: It's definitely an issue with the bottom microphone. When I cover the back speaker, the video's sound is almost gone. When I cover the bottom speaker (right channel), there isn't much of a difference at all.
Have any of you tried making a video recording with audio and also noticed this issue?
I recently started to hear rattle from my top speaker on the m7, so i ordered a replacment online, but it too sounded blown and rattled when i put it in to the phone. i thought just bad luck and ordered 3 more from another seller on ebay, all those speakers sound bad as well. i am in the process of having replacements being shipped over from both sellers, but i dont understand why all four speakers would have the same issue. Has anyone had similar problems with their replacement speakers?
I tested first by inserting the speakers in the phone but it was getting tiring replacing speakers and it also started to damage my phone the repeated pulling of the boards and pushing them, so i found an audio amp that could play the speakers at usual levels, all of them rattle when not in the phone, next i had a htc frame laying around that i inserted them in after cleaning them with duct tape, they still rattle.
I cant seem to fix this issue. I am thinking of using a bottom speaker as a replacment for the top after possibly modifying it, it seems to be more powerful and resistant to wear, but has anyone tried this before, if so please tell me what modifications were made.
Check the headphone output for distorted sound. If so, the internal audio amplifier might be blown, and replacing the speakers will make no difference.
asd
The small top hole is one of the microphones. There's an identical one on the bottom of the phone. So, you can make stereo recordings.
https://goo.gl/images/VqxsYw
The earpiece actually turns into a 3rd microphone for high decibel environments, like live concerts.
But that top one is one of the two "regular" microphones.
Thanks, I thought so. Is it only for recording, or for noise reduction too? Recording I don't care about. Also, should I plug it with glue?
Mastiff said:
On autopilot I was going to put in a SIM card in my brand new phone and pressed where the hole was on my previous phone. Bad mistake, I guess... I probably put it right through something vital. Because I used the small hole at the top of the phone. Not the side. The light wasn't all that good, so I didn't notice that there was no SIM holder there. My guess is that it is a mike of some sorts, but I tried to record sound and had no problems with that. And it seems like there's a mike at the bottom of the thing too. So what did I mess up this time?
Edit: And does this mean that the phone isn't water resistant anymore? Can I stuff a bit of black silicone glue (the type used in bathroooms) in there with the pointy tool to make it water resistant again?
Edit 2: Oh, please drop the idiot jokes. I know it! Googling I have seen that I am far from the only one that has done that, I just would like to know exactly what it is on this phone, and if I should plug the hole to keep i waterproof. That's rather important for me, because I am an avid hobby crawfish and crab fisher and will probably get water splashing over this.
Click to expand...
Click to collapse
Aren't there barometer measuring apps for that ?
I read that by checking on pressure you can find out if your phone is still water resistant
Mastiff said:
Thanks, I thought so. Is it only for recording, or for noise reduction too? Recording I don't care about. Also, should I plug it with glue?
Click to expand...
Click to collapse
How about fixing it?
LG V30 Microphone Replacement
https://www.ifixit.com/Guide/LG+V30+Microphone+Replacement/104093
If you don't want to tackle it, cell phone repair shop can.
That top mic is probably used for noise reduction during phone calls (since it's the top mic and you would speak into the bottom one), but used for recording stereo when actually recording? I'm sort of guessing on this.
If someone who is audio has better answer, jump in.
zacharias.maladroit, I have also read that. But I have read that it doesn't work as well, since the holes "breathe", they are mes of goretex or similar material. But I'll try anyway, thanks.
ChazzMatt, Interesting, thanks! Looking at that video at around 4:55 it may seem like the pin must have penetrated to the side of the microphone! I think I see the pinhole to the right of where the actual microphone is. As for fixing it, I am far to clumsy. But using a shop is of course an option, the only thing is that the phone is brand new and I'm guessing I'll loose the warranty for that. But I think I will first of all find out if the microphone isn't damaged, and then I will see what happens when I cover the hole. If it doesn't change the call qualty I will probably choose (at least for now) to glue shut that pinhole. If it is a problem for call quality I can maybe live with that using a silicone case and a piece of electrical tape over the pinhole when I go out to fish.
ChazzMatt said:
How about fixing it?
LG V30 Microphone Replacement
https://www.ifixit.com/Guide/LG+V30+Microphone+Replacement/104093
If you don't want to tackle it, cell phone repair shop can.
That top mic is probably used for noise reduction during phone calls (since it's the top mic and you would speak into the bottom one), but used for recording stereo when actually recording? I'm sort of guessing on this.
If someone who is audio has better answer, jump in.
Click to expand...
Click to collapse
Mastiff said:
ChazzMatt, Interesting, thanks! Looking at that video at around 4:55 it may seem like the pin must have penetrated to the side of the microphone!
think I see the pinhole to the right of where the actual microphone is. As for fixing it, I am far to clumsy. But using a shop is of course an option, the only thing is that the phone is brand new and I'm guessing I'll loose the warranty for that. But I think I will first of all find out if the microphone isn't damaged, and then I will see what happens when I cover the hole. If it doesn't change the call qualty I will probably choose (at least for now) to glue shut that pinhole. If it is a problem for call quality I can maybe live with that using a silicone case and a piece of electrical tape over the pinhole when I go out to fish.
Click to expand...
Click to collapse
Yeah, 4:55 - 5:30 on that video shows taking out the old mic and putting in the new, for anyone else who needs to do it.
I thought it was the portal through which the Little Green men inVariably came out 30 times each night to hide your car keys, TV remote, and generally turn your life into a living hell?
Thread Owner request.
THREAD CLOSED