Is there any possible ways to get the unlock code via fastboot?
I tried to flash ALP-L29C636E2R1P12B159 (9.0.0.159) on my decive but it didnt booted and stucked in erecovery.
TWRP also doesnt boot and I cant flash any stock ROM bc my bootloader is unlocked.
System, Kernel and recovery_ramdisk are flashable but ramdisk not...
I searched for the email from huawei but couldnt find it and as the website is down i only see a way to find the code is via fastboot.
I hope someone can help or provide me the cust.img boot.img, recovery.img and system.img
Related
Recently, i was on bootloop ... i tried to flash my original recovery and fastboot. But, i accidentally execute the wrong command... Now there's no way i cant get to bootloader or flash something again, any other ways?
A lot more info needed, what device, what was command, etc
The more info the more accurate the help
Tell us more info about the device.
Can you flash anything through ADB or using fastboot?
Sent from my VF-895N using XDA Free mobile app
Thomas Wolff said:
Tell us more info about the device.
Can you flash anything through ADB or using fastboot?
Sent from my VF-895N using XDA Free mobile app
Click to expand...
Click to collapse
ASUS ZENFONE T00J, LOLIPOP 3.23.40.52 , Yes i can connect via adb from recovery... but i cant fastboot, the bootloader is the only way to use fastboot.
demkantor said:
A lot more info needed, what device, what was command, etc
The more info the more accurate the help
Click to expand...
Click to collapse
i flash, fastboot flash boot recovery.img , it should be flash recovery recovery.img
You changed you kernel to a recovery.IMG, try and find a flashable.zip of your boot.IMG and flash via twrp
Although I'm not familiar with this particular device it should allow you to boot to bootloader regardless of kernel, at least any device I have used does this
Is the recovery a custom recovery? If so does it have an option to reboot to bootloader?
Otherwise try
adb reboot bootloader
demkantor said:
You changed you kernel to a recovery.IMG, try and find a flashable.zip of your boot.IMG and flash via twrp
Although I'm not familiar with this particular device it should allow you to boot to bootloader regardless of kernel, at least any device I have used does this
Is the recovery a custom recovery? If so does it have an option to reboot to bootloader?
Otherwise try
adb reboot bootloader
Click to expand...
Click to collapse
So, i flashed the recovery*TWRP) to bootloader that made the bootloader changed to recovey, i tried to REboot to bootloader but it always came to TWRP, i boot to recovery it came to asus recovery
.
Boot is the kernel, so there is a chance you are still OK
Try flashing original firmware through factory recovery
http://support.asus.com/download.as...ne 5&p=39&s=1&os=32&hashedid=96nqlxHp1VKV4Rdz
I tried to flash the same firmware via ADB sideload, but it said " Only with android 4.4.2 that you can updrage to android 5.0. E:Erron in /sideload/package.zip (Status 7).
It looks like there are downgrade instructions in each firmware download, try this method out
Hi I havae huawei plk-l01 single sim eu phone.
First I want to make a root.
Unlcked Bootlader succesfully.installed twrp succes and root succesfuly flashed.
After reboot
phone bootloop.
and I dont know what is my Bxxx versiion.Please help me How can I reborn this phone :S
Hi , flash this file for root , works both for B121 to B371.
https://drive.google.com/file/d/0B3O4DzQkXNR4aFoxbXk5cmZPRlE/view?usp=sharing
it's a super SU adapted to Honor7 by me
.
technopark said:
Hi I havae huawei plk-l01 single sim eu phone.
First I want to make a root.
Unlcked Bootlader succesfully.installed twrp succes and root succesfuly flashed.
After reboot
phone bootloop.
and I dont know what is my Bxxx versiion.Please help me How can I reborn this phone :S
Click to expand...
Click to collapse
You have to flash the Stock firmware in order to reborn the phone.
Follow these steps in order to do that.
Download your latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will nw get to the full stock firmware.
This will help you get your fone back from loops.
I installed the 135 update for my BLA-L29 (C605) Mate 10 Pro and noticed the face lock got really slow after I flashed HyperX Kernel. I then thought I found a stock kernel for the Mate 10 Pro and flashed it. Now I cannot get past the boot screen, I cannot get into TWRP, eREcovery isn't able to wipe my phone, error trying to update, all the fun! I can get to fastboot no problem and my phone shows "Phone Unlocked," and "FRP Unlock." Bootloader is unlocked and I'm pulling my hair on trying to figure out how to get it back to the 135 update which was running just fine until I decided to get cute with Hyper X. I'm at the brink of buying credits through Funky but I don't want to do that. Can someone please walk me through how to unbrick using DC Phoenix. I've got the 135 update file downloaded but could use some more help. Thank you!
can you descripe the step, how you flashed the kernel? Over fastboot in this form: fastboot flash kernel filename.img? or fastboot flash boot filename.img? fastboot flash kernel filename.img is the correct one. But if you have flashed it to the boot partition (fastboot flash boot filename.img) then you need to find the stock boot partition. Follow this thread and unpack kernel.img and boot.img. Then flash kernel.img in this form: fastboot flash kernel kernel.img and boot img in this form fastboot flash boot boot.img
I have a problem.
I have managed to put the phone in EDL mode and with the help of IDT v2 temporarily unlock the bootloader. In this mode I had managed to flash twrp and boot to it successfully. Through twrp and adb I have hex edited the nvme file (guide ) to try and unlock the bootloader for good.
Unfortunately, the phone now can't boot into recovery mode. Only fastboot mode (with locked or unlocked bootloader -through IDT-) is accessible now. Flashing from the fastboot mode (with temporarily unlocked bootloader) is being reported as successful but the phone can't reboot into recovery.
Is there a way to successfully boot into twrp in this state?
Any and all suggestions are welcomed!
Thank you in advance!
To be honest, there are some ways, let's do some simple questions first.
Did you try flashing twrp again?
- if yes and it still don't work, try to extract an stable firmware recovery, erecovery with firmware extractor and try to flash it clean, do an recovery boot try and flash twrp again
Is the erecovery still intact?
- if yes try to recover the phone and retry you whole journey, if this don't work but the recovery can start u need to learn some things and Google them. Before i explain anything its better to learn from sources. Google following things: dload, extracting huawei firmware updates, huawei adb commands. If you are willing to do the dload method u need a usbc to a adapter and an usb stick. A few bucks but any cable will work. At team mt u get the update, extract a complete update and place it into dload, boot erecovery and hopefully it will recover anything. After that twrp and so on. Always double check adb protocols and cables. If anything happens while flashing u will brick the recovery. And u need to redo the erecovery thing.
I'm not that active but hopefully it will help
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
you should have flashed vbmeta.img so that you don't get in bootloop
You mean your phone wouldn't go into bootloader by "Vol. down button + power button" holding from power off state?
T59y9 said:
fastboot flash magisk_patched.img
Click to expand...
Click to collapse
Do you mean "fastboot flash recovery magisk_patched.img"??
the correct command is fastboot flash boot magisk_patched.img
Maybe he wrote fastboot flash magisk_patched .img
but I think it would have returned an error
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
Maybe the rom you downloaded and the base rom running on your device is not the same version, that may cause the error. {Mod edit}
@T59y9
Hi
did you solve in some way?
My realme 7 5G is not rooted.
Just arrived me friday, I udated to new firmware trought recovery. After the reboot did not woke up anymore.
Black screen. no realme logo. nothing.
tried all button combinations, nothing. no boot, no logo, recovery, no fastboot.
tried also with charger attached, with usb on PC.
Nothing...
Any idea to solve my problem?
thank you.
how did you unlock the bootloader?
in depth test app says my model does not support in-depth test
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
gannjunior said:
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
Click to expand...
Click to collapse
oh sorry
any idea how to solve?
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
same anyone know how to solve this pls :/
First you all. Say the Model Number. You talk about Realme 7/Pro or 5G...
This issues is fixable. Just need extra tools to bypass Google FRP and a factory images ROM versions. Fixed few devices with the same situation!
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
did you find soultion of this at now because i also have same problem?
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
martinbrettphilo said:
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
Click to expand...
Click to collapse
It'll be kinda hard. You're gonna have to find a stock ROM - not an OTA update - and you're gonna need to use python to extract the contents from the .OFP file. This should be it. https://firmwarefile.com/oppo-realme-7-5g-rmx2111
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
immns said:
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
Click to expand...
Click to collapse
good. this for Realme 7 :
- Textguide : https://telegra.ph/Hard-Brick-Fix-for-Realme-7-01-25
hello guys, i'm having a problem here, I just installed a pixel plus ui and then installed the magisk app, then I renamed it to a zip file as mentioned in the website and went to flash it on my phone (Realme 7) after flashing successfully completed I pressed the reboot to system option, now it's stuck on the realme logo and doesn't budge anymore... I'm really worried please help me.