Lollipop Sound Enchantment
Hi Guys, here speak the maybe youngest Developer on XDA, I am only 15
I created a new Soundmod to improve sound
This Mod is only for Stock Lollipop (14.5.A.0.242) from Xperia Z Ultra
Installation Guide :
Reboot to recovery
Make a Nandroid Backup of your System
Flash this zip
Wipe Cache and Dalvik Cache
Reboot to system
This mod includes:
Dolby DAP (Surround doesn't work, app is buggy, Please do not open this app, boost sound only)
ASound (384kHz 64bit)
MaxxAudio
Harman Kardon
My Sampling Sound Mod (384kHz 32bit)
DSD and ALAC support
XLoud
DSEE-HX (Fully working Port) (96kHz 24bit)
SRS FX
New modified mixer_paths.xml for a sound like a HTC
SRS TruMedia
SRS Wowhd
SRS 3D Speaker
BeatsAudio
DSEE-HX and ALSA ASound upscaling to 384kHz 64bit
Here the link to the Original thread: http://forum.xda-developers.com/xpe...undmod-lollipop-sound-enchantment-v1-t3105044
This mod works perfectly with my another Soundmod: http://forum.xda-developers.com/xper...d-mod-t3070954
And thanks to my Friend Carla <3, who gave me the power to do this soundmod and more, who makes me happy every time, who helps me on bad times
I will never forget that, thank you so much...
You are so beautiful
Your the-cortana-project
the-cortana-project said:
Lollipop Sound Enchantment
Hi Guys, here speak the maybe youngest Developer on XDA, I am only 15
I created a new Soundmod to improve sound
This Mod is only for Stock Lollipop (14.5.A.0.242) from Xperia Z Ultra
Installation Guide :
Reboot to recovery
Make a Nandroid Backup of your System
Flash this zip
Wipe Cache and Dalvik Cache
Reboot to system
This mod includes:
Dolby DAP (Surround doesn't work, app is buggy, Please do not open this app, boost sound only)
ASound
MaxxAudio
Harman Kardon
My Sampling Sound Mod
DSD and ALAC support
XLoud
DSEE-HX
SRS FX
New modified mixer_paths.xml for a sound like a HTC
Here the link to the Original thread: http://forum.xda-developers.com/xpe...undmod-lollipop-sound-enchantment-v1-t3105044
This mod works perfectly with my another Soundmod: http://forum.xda-developers.com/xper...d-mod-t3070954
And thanks to my Friend Carla <3, who gave me the power to do this soundmod and more, who makes me happy every time, who helps me on bad times
I will never forget that, thank you so much...
You are so beautiful
Your the-cortana-project
Click to expand...
Click to collapse
I wii test it soon and feadback
TNX YOUNG MAN
Dsee-hx port fully working on xperia z ultra!!!!!
Dsee-hx is possible for xperia z ultra!!!!!!
the-cortana-project said:
Dsee-hx port fully working on xperia z ultra!!!!!
Dsee-hx is possible for xperia z ultra!!!!!!
Click to expand...
Click to collapse
Where is it? :good:
Hi everyone and root lovers
We have a good speaker in our k6 series and I think it's good when used with dolby, I tried so hard but dolby didn't work on oreo rom or I couldn't..
For those who want to try, I get the best sound for headphone and phone speaker this way:
System equalizer should be turned off from its on - off switch, no need to disable or uninstall;
1- İnstall; 'Audio Modification Library' (Magisk Module)
2- Reboot recovery and flash zip; 'ViPER4Android Black n Cheese Edition Unity.zip' (this module is always flashing without driver problem)
3- Reboot the system and control the viper4 (if it is running normally, continue)
4- Restarting recovery again and flash zip: ' SoundModAromaInstaller.zip'
4- there are many options but some did not work, my install settings:
4-(All other options and VİPER4Arise: skip-none)
- New user
- Core System, then Modules
- VIPER4Arise Profiles: yes
- ToolBoox: install
- Remove deep buffer from audio policy: no
- Set SELinux Permissive Mode: no
- SDCard Permissions Repair: yes
- Next: install
- Finish: Wipe Dalvik/ARTCache, reboot system
Links:
https://forum.xda-developers.com/note5/development/r-s-e-sound-systems-modular-aroma-t3573863
https://androidfilehost.com/?w=files&flid=251286
(thanks to the developers)
if you want to use the detailed headset settings for the phone speaker; VİPER4Android> Settings> Lock effect mode> Headset
I get good sound from headphones and speakers in this way, sorry if there is any faulty information I'm no expert..
have a good day..
Dolby Digital Plus
Hello again,
I found another forum and I want to share a good working version on oreo with magisk v18
You can install the zip file from twrp after the above installations or only Dolby Digital , if you want to delete; uninstall file is available
I tested it on bootlegger rom and it works fine, achievements..
Tested and working:
[Oreo-Pie]Dolby Digital Plus-[UNiTY][Light]_by_repey6-20181127.zip
https://forum.xda-developers.com/an...e-20181115-t3868192/post78183070#post78183070
guys i need help regarding reversing stereo output on my earphones, i.e. left sound to right and right sound to left.
My Device : Redmi Note 4X (mido) (rooted with Magisk)
ROM - MIUI 9.1.3 by Xiaomi.eu on Android v7.0
Below is the screenshot of mixer xml files
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Android. Simple to use, great sound quality and a lot of customization.
Steps:
-Extract the attached IRS.zip into Android/data/com.pittvandewitt.viperfx/files/Kernel (For Android 11 follow this tutorial)
-Install latest Viper4Android apk (Download here), open it, grant root access and install the drivers.
-Reboot the device.
IF THE MOD IS NOT WORKING AFTER REBOOT TRY SETTING SELINUX MODE TO PERMISSIVE WITH THIS APP AND/OR INSTALLING AUDIO MODIFICATION LIBRARY MAGISK MODULE
HEADSET
Go to Headset and enable the Master power switch, I suggest you put on your headphones now so you can hear the changes in the sound yourself and tweak them to your liking.
My settings are:
Master power: ON
FIR equalizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: IRS.irs (copy IRS.irs from the rar into Viper4Android/Kernel); Cross Channel: 60%
Dynamic System (enabled); Listening Device: High-end headphone (v2); Dynamic Bass:7%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 115 Hz; Bass Boost: 3.5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:3.5 dB
Auditory system protection (enabled); On; Binaural level:1
Feel free to share your own settings in this thread!
Credits :
- @zhuhang (Official Thread)
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt
- @ahrion
- @afah_me for stuck at bootlogo fix
Thanks to @sauliiin for his profiles:
"Here I share a lot of profiles and some other stuff for Viper4Android.
Just download, copy it and replace viper4android folder, close and open viper and choose your desired profile. My favorite is "Saulin", that is based on "V4ARISE".
Try and choose the best for you! Peace out!
https://mega.nz/#F!z5UmGaTJ!kWuvdZ7lpJ7Vt0tEsSlR4A"
Thanks for the settings, phone speaker does sound better now.
Do you have also settings for bluetooth car audio?
this worked great.
thanks!
pavaosk said:
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Android. Simple to use, great sound quality and a lot of customization.
Steps:
Flash the attached Magisk module (v4afx-legacy_v4.3.zip) through Magisk Manager and follow module instructions.
After that reboot your device and enter the Viper4Android app.
Next, you need to set up the sound mod.
HEADSET
Go to Headset and enable the Master power switch, I suggest you put on your headphones now so you can hear the changes in the sound yourself and tweak them to your liking.
My settings on Mi 8 Lite are:
Master power: ON
Spectrum Extension (enabled): Strength: 0,5
FIREqualizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: BBE2.irs (extract the attached BBE_2.zip into Viper4Android/Kernel); Cross Channel: 60%
Dynamic System (enabled); Listening Device: High-end headphone v2; Dynamic Bass:5%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 100 Hz; Bass Boost: 3,5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:3,5 dB
PHONE SPEAKER
Master power: ON
FIREqualizer (enabled): Acoustic
Convolver (enabled); Impulse Response: BBE2.irs (extract the attached BBE_2.zip into Viper4Android/Kernel); Cross Channel: 30%
BLUETOOTH DEVICE (based on my UE BOOM 2 speaker)
Master power: ON
Spectrum Extension (enabled): Strength: 0,5
FIREqualizer (enabled): Preset: Acoustic
Dynamic System (enabled); Listening Device: High-end headphone v2; Dynamic Bass:10%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 100 Hz; Bass Boost: 3,5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:6 dB
Feel free to share your own settings in this thread!
Credits :
- @zhuhang (Official Thread)
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt
- @ahrion
For MIUI 9.2.38:
"Guys I'm using 9.2.38 miui.eu pie, and not until I see in oficial forum the tip, install the latest version 2.7 from oficial topic here on xda, don't download direct from magisk, and use lib workaround during install, now is working flawless here later I'm install ACP and AML, everything working as it should." Thanks to @marceloBoZo
Thanks to @sauliiin for his profiles:
"Here I share a lot of profiles and some other stuff for Viper4Android.
Just download, copy it and replace viper4android folder, close and open viper and choose your desired profile. My favorite is "Saulin", that is based on "V4ARISE".
Try and choose the best for you! Peace out!
https://mega.nz/#F!z5UmGaTJ!kWuvdZ7lpJ7Vt0tEsSlR4A"
Click to expand...
Click to collapse
Saulin is great set-up. Speaker, Bluetooth work's great. Not yet try in headset.
Om Kecap said:
Saulin is great set-up. Speaker, Bluetooth work's great. Not yet try in headset.
Click to expand...
Click to collapse
It can do for miui 11 ?
Method 4 is working for me on MI 8 Lite with MIUI11 and A10: https://forum.xda-developers.com/mi-8/themes/guide-force-enable-viper4android-stuck-t3972551
Updated guide for Android 10 based roms, MIUI and AOSP.
I have the stock rom..
Miui 11.0.1 Global firmware stock rom.. The latest firmware for that phone.
My phone is mi 8 lite.
I installed the stock rom wia recovery using pith black recovery.. All succes.
After that system boot.. I finished the setup ??
Then i boot again to recovery flsshed magisc 20.3 and reboot again all ok..
Then i used magisc module to flash Viper4android V2.7.1.6 rebooted and works very fine..
Then i installed the dolby digital plus V7. 2 for Android 10.. Reboot and works ?
Booth of viper4android and dolby works without problem.
No musicfx uninstalled no modification library / sound path aplyed.. ? So.. Unusefull tutorial
derrekgamer said:
I have the stock rom..
Miui 11.0.1 Global firmware stock rom.. The latest firmware for that phone.
My phone is mi 8 lite.
I installed the stock rom wia recovery using pith black recovery.. All succes.
After that system boot.. I finished the setup ??
Then i boot again to recovery flsshed magisc 20.3 and reboot again all ok..
Then i used magisc module to flash Viper4android V2.7.1.6 rebooted and works very fine..
Then i installed the dolby digital plus V7. 2 for Android 10.. Reboot and works ?
Booth of viper4android and dolby works without problem.
No musicfx uninstalled no modification library / sound path aplyed.. ? So.. Unusefull tutorial
Click to expand...
Click to collapse
Yeah, the new Viper4Android version fixes the problems we had to bypass by using the steps I mentioned in the tutorial. I will update the tutorial soon, no reason to call it unuseful
pavaosk said:
Yeah, the new Viper4Android version fixes the problems we had to bypass by using the steps I mentioned in the tutorial. I will update the tutorial soon, no reason to call it unuseful
Click to expand...
Click to collapse
Even with the Magisk module working, I always come back here to see the settings and apply them to my device.
Thanks for the tutorial.
Thread updated.
Do you have new updates on this?
Convolver (enabled); Impulse Response: IRS.irs
But I don't see file with that name on list...
Oh, I get is, it is need new ones for v2.7.2.1
If you can rewrite for this new version...
for example there is no more "profile" there is "preset" folder. and old xml does not work on never version... It must be make again...
Can you do it... At least for best ones...
Hey guys, I just wanted to share how I got dolby atmos and the Moto Equalizer working.
First up the official descriptions and telegram links of the mod developers:
- [Updates] Dolby Atmos and Viper4Android
Dolby Atmos and Viper4Android by @guitardedhero
Discussion group : https://t.me/joinchat/E-On6U9cxckhIlAnoPIYpw
Download here: https://t.me/viperatmos
- Audio Ryuki Mods Archives
https://t.me/joinchat/E-On6U9cxckhIlAnoPIYpw
&& @modsandco for audio mods discussion groups
Free for kang... May you will make it better...
Give me an ice tea to support my works: https://www.paypal.me/reiryuki
https://t.me/audioryukimods
WHAT DO YOU NEED?
Your phone must be rooted with Magisk.
If you don't know how, just search for it on Google/ here in our forum.
It's pretty easy.
INSTALLATION
STEP 0:
Check if your phone is permissive, if it's not do this:
Use a terminal app and type the following
su
setprop dolby.force.permissive 1
Make sure it's successful.
STEP 1:
You have to download the latest versions of the mentioned zips below:
-Dolby Atmos RC zip (recommended version)
Download here:
https://github.com/reiryuki/Dolby-Atmos-RC4-Ryuki-Mod/releases
- Moto Equalizer Zip
Download here: https://github.com/reiryuki/Moto-Waves-Edge-Maxx-Audio-FX/releases
- Audio Compatibility Patch Module(can be found in Magisk Manager)
- Audio Modification Library Module (can be found in Magisk Manager)
STEP 2:
Copy all files to your phone storage
STEP 3:
Open Magisk Manager and install the modules in this order
1. Dolby Atmos
2. Moto Equalizer
3. Audio Compatibility Patch
4. Audio Modification Library
Now reboot your phone.
You should have two new Apps now, Dolby Atmos and the Moto Equalizer.
Congratulations, you now have Dolby Atmos and Moto Equalizer!
Short Info:
The Moto Equalizer can disappear from your app drawer, it is still there though and can be accessed by going in your music player and choosing Equalizer.
Lockscreen Visualizer??
sush1101 said:
Lockscreen Visualizer??
Click to expand...
Click to collapse
That is a rom feature....so no.
Ok Thanks
Hi,
i cant install Dolby Atmos. Patching failed /system......./vintf/manifest.xml
Any solution?
Thank you