After trying out a lot of different sound mods and apps and patches I always came back to Viper4Android. Simple to use, great sound quality and a lot of customization.
Steps:
-Extract the attached IRS.zip into Android/data/com.pittvandewitt.viperfx/files/Kernel (For Android 11 follow this tutorial)
-Install latest Viper4Android apk (Download here), open it, grant root access and install the drivers.
-Reboot the device.
IF THE MOD IS NOT WORKING AFTER REBOOT TRY SETTING SELINUX MODE TO PERMISSIVE WITH THIS APP AND/OR INSTALLING AUDIO MODIFICATION LIBRARY MAGISK MODULE
HEADSET
Go to Headset and enable the Master power switch, I suggest you put on your headphones now so you can hear the changes in the sound yourself and tweak them to your liking.
My settings are:
Master power: ON
FIR equalizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: IRS.irs (copy IRS.irs from the rar into Viper4Android/Kernel); Cross Channel: 60%
Dynamic System (enabled); Listening Device: High-end headphone (v2); Dynamic Bass:7%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 115 Hz; Bass Boost: 3.5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:3.5 dB
Auditory system protection (enabled); On; Binaural level:1
Feel free to share your own settings in this thread!
Credits :
- @zhuhang (Official Thread)
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt
- @ahrion
- @afah_me for stuck at bootlogo fix
Thanks to @sauliiin for his profiles:
"Here I share a lot of profiles and some other stuff for Viper4Android.
Just download, copy it and replace viper4android folder, close and open viper and choose your desired profile. My favorite is "Saulin", that is based on "V4ARISE".
Try and choose the best for you! Peace out!
https://mega.nz/#F!z5UmGaTJ!kWuvdZ7lpJ7Vt0tEsSlR4A"
Thanks for the settings, phone speaker does sound better now.
Do you have also settings for bluetooth car audio?
this worked great.
thanks!
pavaosk said:
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Android. Simple to use, great sound quality and a lot of customization.
Steps:
Flash the attached Magisk module (v4afx-legacy_v4.3.zip) through Magisk Manager and follow module instructions.
After that reboot your device and enter the Viper4Android app.
Next, you need to set up the sound mod.
HEADSET
Go to Headset and enable the Master power switch, I suggest you put on your headphones now so you can hear the changes in the sound yourself and tweak them to your liking.
My settings on Mi 8 Lite are:
Master power: ON
Spectrum Extension (enabled): Strength: 0,5
FIREqualizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: BBE2.irs (extract the attached BBE_2.zip into Viper4Android/Kernel); Cross Channel: 60%
Dynamic System (enabled); Listening Device: High-end headphone v2; Dynamic Bass:5%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 100 Hz; Bass Boost: 3,5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:3,5 dB
PHONE SPEAKER
Master power: ON
FIREqualizer (enabled): Acoustic
Convolver (enabled); Impulse Response: BBE2.irs (extract the attached BBE_2.zip into Viper4Android/Kernel); Cross Channel: 30%
BLUETOOTH DEVICE (based on my UE BOOM 2 speaker)
Master power: ON
Spectrum Extension (enabled): Strength: 0,5
FIREqualizer (enabled): Preset: Acoustic
Dynamic System (enabled); Listening Device: High-end headphone v2; Dynamic Bass:10%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 100 Hz; Bass Boost: 3,5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:6 dB
Feel free to share your own settings in this thread!
Credits :
- @zhuhang (Official Thread)
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt
- @ahrion
For MIUI 9.2.38:
"Guys I'm using 9.2.38 miui.eu pie, and not until I see in oficial forum the tip, install the latest version 2.7 from oficial topic here on xda, don't download direct from magisk, and use lib workaround during install, now is working flawless here later I'm install ACP and AML, everything working as it should." Thanks to @marceloBoZo
Thanks to @sauliiin for his profiles:
"Here I share a lot of profiles and some other stuff for Viper4Android.
Just download, copy it and replace viper4android folder, close and open viper and choose your desired profile. My favorite is "Saulin", that is based on "V4ARISE".
Try and choose the best for you! Peace out!
https://mega.nz/#F!z5UmGaTJ!kWuvdZ7lpJ7Vt0tEsSlR4A"
Click to expand...
Click to collapse
Saulin is great set-up. Speaker, Bluetooth work's great. Not yet try in headset.
Om Kecap said:
Saulin is great set-up. Speaker, Bluetooth work's great. Not yet try in headset.
Click to expand...
Click to collapse
It can do for miui 11 ?
Method 4 is working for me on MI 8 Lite with MIUI11 and A10: https://forum.xda-developers.com/mi-8/themes/guide-force-enable-viper4android-stuck-t3972551
Updated guide for Android 10 based roms, MIUI and AOSP.
I have the stock rom..
Miui 11.0.1 Global firmware stock rom.. The latest firmware for that phone.
My phone is mi 8 lite.
I installed the stock rom wia recovery using pith black recovery.. All succes.
After that system boot.. I finished the setup ??
Then i boot again to recovery flsshed magisc 20.3 and reboot again all ok..
Then i used magisc module to flash Viper4android V2.7.1.6 rebooted and works very fine..
Then i installed the dolby digital plus V7. 2 for Android 10.. Reboot and works ?
Booth of viper4android and dolby works without problem.
No musicfx uninstalled no modification library / sound path aplyed.. ? So.. Unusefull tutorial
derrekgamer said:
I have the stock rom..
Miui 11.0.1 Global firmware stock rom.. The latest firmware for that phone.
My phone is mi 8 lite.
I installed the stock rom wia recovery using pith black recovery.. All succes.
After that system boot.. I finished the setup ??
Then i boot again to recovery flsshed magisc 20.3 and reboot again all ok..
Then i used magisc module to flash Viper4android V2.7.1.6 rebooted and works very fine..
Then i installed the dolby digital plus V7. 2 for Android 10.. Reboot and works ?
Booth of viper4android and dolby works without problem.
No musicfx uninstalled no modification library / sound path aplyed.. ? So.. Unusefull tutorial
Click to expand...
Click to collapse
Yeah, the new Viper4Android version fixes the problems we had to bypass by using the steps I mentioned in the tutorial. I will update the tutorial soon, no reason to call it unuseful
pavaosk said:
Yeah, the new Viper4Android version fixes the problems we had to bypass by using the steps I mentioned in the tutorial. I will update the tutorial soon, no reason to call it unuseful
Click to expand...
Click to collapse
Even with the Magisk module working, I always come back here to see the settings and apply them to my device.
Thanks for the tutorial.
Thread updated.
Do you have new updates on this?
Convolver (enabled); Impulse Response: IRS.irs
But I don't see file with that name on list...
Oh, I get is, it is need new ones for v2.7.2.1
If you can rewrite for this new version...
for example there is no more "profile" there is "preset" folder. and old xml does not work on never version... It must be make again...
Can you do it... At least for best ones...
Related
First of all this is a re-post i thought it might be helpful for the new users specially who are using aosp rom and are unable to use acid audio mod
Read the thread properly before complaning
Version: FX version 2.2.0.4 / XHiFi version 2.0.0.7
Codename: (FX version) Beautiful / (XHiFi version) X-Factor
Compiled date: March 20,2013 / March 20,2013 - Official Release
Operating environment: Android 2.3 / 4.0 / 4.1 / 4.2 (4.2 & MIUIv5 follow Compatibility Setup)
Hardware platforms: ARM (ARM11, Cortex A8/A9 or higher)
FX Minimum requirement (Convolver turned off): A8 300MHz or ARM11 500MHz
FX Minimum requirement (Convolver turned on): A8 single-core 800MHz, recommended dual-core or quad-core 1.2GHz
XHiFi Minimum requirement (All effects turned on): A8 dual-core 1GHz or higher, does not support Tegra2 processor
Language: English (United States) / Simplified Chinese / Traditional Chinese
Index:
1. OP
2. F.A.Q
3. Settings Explained & Recommended Settings for FX
4. Settings Explained & Recommended Settings for XHiFi
5. FIR Equalizer guide
6. CPU Type List - Which drivers to use?
Software Description:
V4A Settings explained & configuration handguide: http://forum.xda-developers.com/show...php?p=39156718
How to use the FIR Equalizer? see: http://forum.xda-developers.com/show...php?p=39156757
If Auto Installer fails, install Busybox and try again. Or else follow manual installation.
Note: To get the best compatibility with your rom, recommended manual installation.
NEW Compatible Mode:
Compatible Mode supports large variety of music players and the players' own EQ/sound effects (system-provided/third party)
1. In option, switch to Compatible Mode. Reboot, done.
NEW Safe Mode:
If V4A dont work on many players, try switching to Safe Mode to work with almost any music player.
1. In option, switch to Safe Mode. Done.
Latest version change log:
FX version: v2.2.0.5
1. Increase toolbox compatibility, improve In-app installation success rate.
2. Fix Continuous install/update popup when enter v4a app.
Note: 2005 only fixes the above bugs, there's no update on lib or effect, so users with 2004 working can skip this version.
FX version: v2.2.0.4 FIXED
NEW. FIXED INSTALLATION
1.CPU load optimization.
2.Add changelog view in menu.
3.Auto driver compatible install and update with ViPER4Android, no longer need to manually install.
4.Add driver safe mode. If you got no audio effect, you can try to switch to safemode.
5.Add normal and compatible mode. If you got no audio effect, you can try to switch to compatible mode.
6.Improve the stability of convolver.
7.Effect profile support save and load.
8.Improved UI interface and logic.
XHiFi version: v2.0.0.7
1.Add changelog view in menu.
2.Auto driver compatible install and update with ViPER4Android, no longer need to manually install.
3.Add driver safe mode. If you got no audio effect, you can try to switch to safemode.
4.Add normal and compatible mode. If you got no audio effect, you can try to switch to compatible mode.
5.Effect profile support save and load.
6.Improved UI interface and logic.
7.Tweak parameters of audio reconstruct.
8.Support TEGRA2 & ARMv5TE chip, both select "Tegra2" driver.
9.Installation process will use toolbox first.
For Poweramp users:
To use V4A with Poweramp properly, you need to follow the steps below.
Open Poweramp Settings -> Audio -> Advanced Tweaks -> Direct volume control -> Turned off.
To solve Poweramp volume too low after turning off Direct volume control:
Turn on V4A's PlaybackAGC, set strength to Medium/Extreme, set Max Gain to Infinity, set Max Output to 0db.
For system-provided music players (such as MIUI music player, Apollo etc.):
In these music players, turning on player equalizer will auto disable V4A, turning off will enable V4A.
Third-party players such as TTPOD and Poweramp have no such problems.
Tips:
To use XHiFi on speaker, use lock effect mode.
New Usage Terms & Condition Policy:
Starting from 1 April 2013, no one can include V4A FX nor XHiFi in their sound engine/sound mod or any work which is not a Rom.
You can only include V4A in Roms, but without any third party sound effects in the particular Rom in which you are featuring V4A.
Third party sound effects include audio effects/sound enhancers/sound panels which are not stock provided.
Example: BeatsAudio is considered third party sound effects to Sony Devices.
DSPManager / Awesome Beats / SRS Panel are also considered third party sound effects without doubt.
Downloads:
http://forum.xda-developers.com/showthread.php?t=2191223
Don't install Fx and XHiFi together Neo V's processor isn't capable of handling both audio effects together
ViPER4Android (V4A) Audio Effects
Copyright (C) 2006-2016 vipercn.com
Translated and refined by [email protected]
XDA Official Maintainer [email protected] http://forum.xda-developers.com/member.php?u=3901724
Installation,Settings,FAQ
As per request of the developer this post has been removed you can refer to the official post
http://forum.xda-developers.com/showthread.php?t=2191223
Reserved
reserved for future use
Reserved
reserved for future use
Reserved
Reserved For future use
Reserved
Reserved for future use
Re: [Audio Mod] Viper V4
Whoah...that's a huge OP considering it is a mod.
Thanks for the effort u put into this.
Sent from my MT11i
Re: [Audio Mod] Viper V4
Nice...but....will this mod work on Android 4.2.2?
Thanks
Sent fom my S-II running Vanilla Rootbox >>Nightly (2013/03/25)<< powered with DorimanX kernel v. >>9.12<<
Re: [Audio Mod] Viper V4
rkoby13 said:
Nice...but....will this mod work on Android 4.2.2?
Thanks
Sent fom my S-II running Vanilla Rootbox >>Nightly (2013/03/25)<< powered with DorimanX kernel v. >>9.12<<
Click to expand...
Click to collapse
You have to try it out
It was meant for 4.1 so I can't say anything about 4.2
Sent from my Xperia Neo V using xda app-developers app
Re: [Audio Mod] Viper V4
Let me know if it works
And remember one thing install it on a clean room because it is incompatible with other audio mod
[MODERATORS] Was unable to edit my post using xda aap so had to post a new reply
Sent from my Xperia Neo V using xda app-developers app
i works great on AntiBillOS 4.2.2 rom...
mastaowen said:
i works great on AntiBillOS 4.2.2 rom...
Click to expand...
Click to collapse
yes it works well on 4.2
i'm also using it on 4.2.2 by AntiBillOS
i will update it on OP
New version coming
Can you ask users to download at original OP?
FAQ, settings explained can be linked to my original posts too.
Only 1st post u can retain.
Neo/Neo V users, more IR samples are always available on the internet, just google them.
In IR Sample Index Thread, I will add those who are made by V4A users and Vipers Team.
I would appreciate if u guys can donate something to me so i can buy a great sound card to produce great IR samples.
Now its 2206 and 2009
hi to all
Can I use this mod on stock based GB Rom?
If not is there any sound mod for GB Rom?
Sent from my MT15i using Tapatalk 2
Alisoofi said:
hi to all
Can I use this mod on stock based GB Rom?
If not is there any sound mod for GB Rom?
Sent from my MT15i using Tapatalk 2
Click to expand...
Click to collapse
Yes, You can
Sent from my Xperia Neo V using Tapatalk 2
deleted
zhuhang said:
Now its 2206 and 2009
Click to expand...
Click to collapse
i will update the op
as soon as i get back home
player
Hay
wich players can i use with this ?
Hey guys i came across Viper4Android Audio mod and i found it really amazing so i thought i could share this with you specially ParanoidAndroid users since AcidAudio Engine V7 crashes it.
I have not tried this on stock rom, Can anyone check if it works?
Downloads:
FX version v2.2.0.6: http://www.mediafire.com/download.php?wn2cn1lrltn685x
XHiFi version v2.0.0.9: http://www.mediafire.com/download.php?ey6ablp36s7uqbh
IRsamples for convolver http://www.mediafire.com/?9am1sogfq9lm31d
1)Download the 2 files and irsamples and extract them, you will find 2 zip files inside each of the first 2 zips, pick the one for android 4.x in each file and extract it
2)install ViPER4Android_FX.apk and open it
3)When prompted, tap yes/update
4)From the list of CPUs that will show up, Choose CortexA9
5)From options, Enable Safe mode (Safe mode for compatibility with more players)
6)install ViPER4Android_XHiFi.apk and open it
7)When prompted, tap yes/update
8)Choose CortexAx
9)From options enable safe mode
10)Reboot
11)extract the IRsamples zip to /sdcard/viper4android/kernel
Then proceed to choose your preferred settings for both fx and xhifi
I set mine like this -This is for headset only-
FX:
<Headset>
1. Master Power: ✔
2. Playback Gain Control: ✘
3. FIR Equalizer: ✘
4. Convolver: ✔
(ii) Impulse Response: Try: SPL GoldMike Impulse w Flair//DBX//JoeMeek **PopEQ (Still looking for something better)
5. Field Surround: ✘
6. Reverberation: ✘
7. Dynamic System: ✘
(iv) Tube Simulator(6N1J): ✘
Click to expand...
Click to collapse
XHIFI:
1. Master Power: ✔
2. Playback Gain Control: ✔
(ii) Select Effect Strength: Slight
(iii) Max Gain: 4x
(iv) Max Output: -1.9dB *-6dB/-10dB
3. FIR Equalizer: ✔
(ii) Select Preset: Acoustic ***Bass Reduce/Vocal Boost
4. Audio Reconstruction: ✔
(ii) Hi Clarity: 100
(iii) Lo Contour: 70
Click to expand...
Click to collapse
* Adjust if you think too loud
** Adjust if you want more bass
*** Adjust if you want less bass
You can also set FX like this
<Headset>
1. Master Power: ✔
2. Playback Gain Control
(1) Enable checkbox: ✘
(2) Select Effect Strength: Slight
(3) Max Gain: 4x
(4) Max Output: -1.9dB
3. FIR Equalizer
(1) Enable checkbox: ✘
(2) Select Preset: Acoustic
(3) Linear Equalizer graphic: default
4. Convolver
(1) Enable checkbox: ✔
(2) Impulse Response: PopEQ // DBX 160SL Blue - Medium Ratio // JoeMeek SC2 Impulse
5. Field Surround
(1) Enable checkbox: ✘
(2) Select Field Surround Strength: Extreme
(3) Select Mid Image Strength: Extreme
6. Reverberation
(1) Enable checkbox: ✘
(2) Room Size: 25m2
(3) Sound Field: 5m
(4) Damping Factor: 0 Percent
(5) Wet Signal: 0 Percent
(6) Dry Signal: 50 Percent
7. Dynamic System
(1) Enable checkbox: ✘
(2) Select Listening Device: Common Earphone(v2)
(3) Select Dynamic Bass: 0 Percent
(4) Tube Simulator(6N1J): ✘
8. Master Gate(Limiter)
(1) Ouput Gain: 0dB
(2) Limit Threshold: 0dB
Click to expand...
Click to collapse
<Tablet Speaker>
1. Master Power: ✔
2. FIR Equalizer
(1) Enable checkbox: ✘
(2) Select Preset: Acoustic
(3) Linear Equalizer graphic: default
3. Convolver
(1) Enable checkbox: ✔
(2) Impulse Response: Studer +1dB Updated
4. Reverberation
(1) Enable checkbox: ✘
(2) Room Size: 25m2
(3) Sound Field: 5m
(4) Damping Factor: 0 Percent
(5) Wet Signal: 0 Percent
(6) Dry Signal: 50 Percent
5. Extra Loud
(1) Enable checkbox: ✘
(2) Select Effect Strength: Slight
(3) Max Gain: 4x
(4) Max Output: 0dB
6. Master Gate(Limiter)
(1) Ouput Gain: 0dB
(2) Limit Threshold: 0dB
Click to expand...
Click to collapse
and xHiFi like this
1. Master Power: ✔
2. Playback Gain Control
(1) Enable checkbox: ✔
(2) Select Effect Strength: Slight
(3) Max Gain: 4x
(4) Max Output: -1.9dB
3. FIR Equalizer
(1) Enable checkbox: ✔
(2) Select Preset: Acoustic
(3) Linear Equalizer graphic: default
4. Audio Reconstruction
(1) Enable checkbox: ✔
(2) Hi Clarity: 50
(3) Lo Contour: 70
5. Master Gate(Limiter)
(1) Limit Threshold: 0dB
Click to expand...
Click to collapse
All credits go to viper520 and zhuhang
AmrBanawan said:
Hey guys i came across Viper4Android Audio mod and i found it really amazing so i thought i could share this with you specially ParanoidAndroid users since AcidAudio Engine V7 crashes it.
I have not tried this on stock rom, Can anyone check if it works?
Downloads:
FX version v2.2.0.6: http://www.mediafire.com/download.php?wn2cn1lrltn685x
XHiFi version v2.0.0.9: http://www.mediafire.com/download.php?ey6ablp36s7uqbh
IRsamples for convolver http://www.mediafire.com/?9am1sogfq9lm31d
1)Download the 2 files and irsamples and extract them, you will find 2 zip files inside each of the first 2 zips, pick the one for android 4.x in each file and extract it
2)install ViPER4Android_FX.apk and open it
3)When prompted, tap yes/update
4)From the list of CPUs that will show up, Choose CortexA9
5)From options, Enable Safe mode (Safe mode for compatibility with more players)
6)install ViPER4Android_XHiFi.apk and open it
7)When prompted, tap yes/update
8)Choose CortexAx
9)From options enable safe mode
10)Reboot
11)extract the IRsamples zip to /sdcard/viper4android/kernel
Then proceed to choose your preferred settings for both fx and xhifi
I set mine like this -This is for headset only-
* Adjust if you think too loud
** Adjust if you want more bass
*** Adjust if you want less bass
You can also set FX like this
<Headset>
<Tablet Speaker>
and xHiFi like this
All credits go to viper520 and zhuhang
Click to expand...
Click to collapse
better than acid audio engine ?
persano said:
better than acid audio engine ?
Click to expand...
Click to collapse
It has everything acid audio engine has plus some more, The convolver feature by itself is pretty amazing given that you choose a good IRsample!
AmrBanawan said:
It has everything acid audio engine has plus some more, The convolver feature by itself is pretty amazing given that you choose a good IRsample!
Click to expand...
Click to collapse
Wow thanks awesome bro keep up the good work!!
AmrBanawan said:
It has everything acid audio engine has plus some more, The convolver feature by itself is pretty amazing given that you choose a good IRsample!
Click to expand...
Click to collapse
This is way better than acid audio. Thanks for the kick a$$ sound.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Love this app!! Now my kindle rocks out the beats. Thanks for sharing the info! :thumbup:
CM 10.1 on KFHD7 using XDA Premium
Has anyone confirmed whether this works on stock CM?
Not here it doesn't. FX driver doesnt initialise properly, XHIFI works but has little effect because the FX doesn't work.
This works great on kinology
Sent from my KFTT using xda app-developers app
This seems to be a lot better than acid for me (maybe i havent configured both properly)
Both mort player and vlc are louder for music and films but netflix seems the same :-s Is it likely netflix is actually louder and it's been a long day?
cheers
Well I got Viper to work on CM after a factory reset.
I couldn't find a place to extract the samples to as I can't find the directory mentioned in the OP... so it's just sitting on the SD card for now until I figure out what to do with it.
I am a novice when it comes to audio settings, so if anyone could help me out on a recommended setup for the speakers (not headphones) that would be much appreciated!
Protomartyr said:
Well I got Viper to work on CM after a factory reset.
I couldn't find a place to extract the samples to as I can't find the directory mentioned in the OP... so it's just sitting on the SD card for now until I figure out what to do with it.
I am a novice when it comes to audio settings, so if anyone could help me out on a recommended setup for the speakers (not headphones) that would be much appreciated!
Click to expand...
Click to collapse
Never thought to create the folder mentioned?
Sent from my CyanogenFire HD
I actually let Viper do that for me. If you press the convolver option, it will create the directory and then ask to place the IR samples in it.
I was thinking of creating it myself, but wasn't sure if there was supposed to be other stuff in the folder (I didn't have a Viper folder anywhere on the kindle to begin with).
Sent from my LG-P769 using xda app-developers app
FX works: Stock Rom 7.3.1
I have the rooted stock rom 7.3.1. and just installed the FX (following the steps of first post) and it´s working!
Thx!
As said in the faq I followed afterwards these instructions, too:
- Why there is background noise when using v4a effects?
Rename /system/lib/soundfx/libbundlewrapper.so to libbundlewrapper.so.bak, reboot device.
Im on Paranoid Rom for Kindle Fire HD 7 and this works nicely. I was annoyed at how low my headset volume output was compared to my SGS3 phone. This helped greatly and it sounds great, thanks!!!
Quick note, and I've seen it mentioned, you CAN create the directory yourself (in the root of the SDCARD\viper4android\kernel ) Place the IR files there and it found them in the apps.
http://forum.xda-developers.com/showthread.php?t=2191223
New update out that works with android 4.3. Testing now and seems to work fine with cm10.2 !!
Sent from my Amazon Kindle Fire HD using XDA Premium 4 mobile app
Thanks for finding this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For your own custom Sig : http://forum.xda-developers.com/showthread.php?t=1922304 Made you click!
EclipseGT said:
http://forum.xda-developers.com/showthread.php?t=2191223
New update out that works with android 4.3. Testing now and seems to work fine with cm10.2 !!
Sent from my Amazon Kindle Fire HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've got it working also on CM10.2 . Now I am trying to figure out how to uninstall/delete/disable DSP Manager (sys file) with no luck. I've tried using Root Broswer and Root Uninstaller Pro with no luck. Any thoughts on how to remove DSP Manager?
EDIT: ok, did some more searching and I was finally able to remove DSP Manager as "su" with Terminal Emulator using the following command to mount the system folder:
mount -o remount,rw /system
then I just deleted the file in its directory
rm DSPManager.apk
This file is currently set to private
Please check the download link!
Sent from my Amazon Kindle Fire HD using xda app-developers app
binhgreat said:
This file is currently set to private
Please check the download link!
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
Not sure of which file/link you are referencing; however, you might try the Google Play Store. This is where I downloaded my viper4android fx for 4.3, which had a lot of Chinese writing.
Lollipop Sound Enchantment
Hi Guys, here speak the maybe youngest Developer on XDA, I am only 15
I created a new Soundmod to improve sound
This Mod is only for Stock Lollipop (14.5.A.0.242) from Xperia Z Ultra
Installation Guide :
Reboot to recovery
Make a Nandroid Backup of your System
Flash this zip
Wipe Cache and Dalvik Cache
Reboot to system
This mod includes:
Dolby DAP (Surround doesn't work, app is buggy, Please do not open this app, boost sound only)
ASound (384kHz 64bit)
MaxxAudio
Harman Kardon
My Sampling Sound Mod (384kHz 32bit)
DSD and ALAC support
XLoud
DSEE-HX (Fully working Port) (96kHz 24bit)
SRS FX
New modified mixer_paths.xml for a sound like a HTC
SRS TruMedia
SRS Wowhd
SRS 3D Speaker
BeatsAudio
DSEE-HX and ALSA ASound upscaling to 384kHz 64bit
Here the link to the Original thread: http://forum.xda-developers.com/xpe...undmod-lollipop-sound-enchantment-v1-t3105044
This mod works perfectly with my another Soundmod: http://forum.xda-developers.com/xper...d-mod-t3070954
And thanks to my Friend Carla <3, who gave me the power to do this soundmod and more, who makes me happy every time, who helps me on bad times
I will never forget that, thank you so much...
You are so beautiful
Your the-cortana-project
the-cortana-project said:
Lollipop Sound Enchantment
Hi Guys, here speak the maybe youngest Developer on XDA, I am only 15
I created a new Soundmod to improve sound
This Mod is only for Stock Lollipop (14.5.A.0.242) from Xperia Z Ultra
Installation Guide :
Reboot to recovery
Make a Nandroid Backup of your System
Flash this zip
Wipe Cache and Dalvik Cache
Reboot to system
This mod includes:
Dolby DAP (Surround doesn't work, app is buggy, Please do not open this app, boost sound only)
ASound
MaxxAudio
Harman Kardon
My Sampling Sound Mod
DSD and ALAC support
XLoud
DSEE-HX
SRS FX
New modified mixer_paths.xml for a sound like a HTC
Here the link to the Original thread: http://forum.xda-developers.com/xpe...undmod-lollipop-sound-enchantment-v1-t3105044
This mod works perfectly with my another Soundmod: http://forum.xda-developers.com/xper...d-mod-t3070954
And thanks to my Friend Carla <3, who gave me the power to do this soundmod and more, who makes me happy every time, who helps me on bad times
I will never forget that, thank you so much...
You are so beautiful
Your the-cortana-project
Click to expand...
Click to collapse
I wii test it soon and feadback
TNX YOUNG MAN
Dsee-hx port fully working on xperia z ultra!!!!!
Dsee-hx is possible for xperia z ultra!!!!!!
the-cortana-project said:
Dsee-hx port fully working on xperia z ultra!!!!!
Dsee-hx is possible for xperia z ultra!!!!!!
Click to expand...
Click to collapse
Where is it? :good:
Hi everyone and root lovers
We have a good speaker in our k6 series and I think it's good when used with dolby, I tried so hard but dolby didn't work on oreo rom or I couldn't..
For those who want to try, I get the best sound for headphone and phone speaker this way:
System equalizer should be turned off from its on - off switch, no need to disable or uninstall;
1- İnstall; 'Audio Modification Library' (Magisk Module)
2- Reboot recovery and flash zip; 'ViPER4Android Black n Cheese Edition Unity.zip' (this module is always flashing without driver problem)
3- Reboot the system and control the viper4 (if it is running normally, continue)
4- Restarting recovery again and flash zip: ' SoundModAromaInstaller.zip'
4- there are many options but some did not work, my install settings:
4-(All other options and VİPER4Arise: skip-none)
- New user
- Core System, then Modules
- VIPER4Arise Profiles: yes
- ToolBoox: install
- Remove deep buffer from audio policy: no
- Set SELinux Permissive Mode: no
- SDCard Permissions Repair: yes
- Next: install
- Finish: Wipe Dalvik/ARTCache, reboot system
Links:
https://forum.xda-developers.com/note5/development/r-s-e-sound-systems-modular-aroma-t3573863
https://androidfilehost.com/?w=files&flid=251286
(thanks to the developers)
if you want to use the detailed headset settings for the phone speaker; VİPER4Android> Settings> Lock effect mode> Headset
I get good sound from headphones and speakers in this way, sorry if there is any faulty information I'm no expert..
have a good day..
Dolby Digital Plus
Hello again,
I found another forum and I want to share a good working version on oreo with magisk v18
You can install the zip file from twrp after the above installations or only Dolby Digital , if you want to delete; uninstall file is available
I tested it on bootlegger rom and it works fine, achievements..
Tested and working:
[Oreo-Pie]Dolby Digital Plus-[UNiTY][Light]_by_repey6-20181127.zip
https://forum.xda-developers.com/an...e-20181115-t3868192/post78183070#post78183070
Hey guys, I just wanted to share how I got dolby atmos and the Moto Equalizer working.
First up the official descriptions and telegram links of the mod developers:
- [Updates] Dolby Atmos and Viper4Android
Dolby Atmos and Viper4Android by @guitardedhero
Discussion group : https://t.me/joinchat/E-On6U9cxckhIlAnoPIYpw
Download here: https://t.me/viperatmos
- Audio Ryuki Mods Archives
https://t.me/joinchat/E-On6U9cxckhIlAnoPIYpw
&& @modsandco for audio mods discussion groups
Free for kang... May you will make it better...
Give me an ice tea to support my works: https://www.paypal.me/reiryuki
https://t.me/audioryukimods
WHAT DO YOU NEED?
Your phone must be rooted with Magisk.
If you don't know how, just search for it on Google/ here in our forum.
It's pretty easy.
INSTALLATION
STEP 0:
Check if your phone is permissive, if it's not do this:
Use a terminal app and type the following
su
setprop dolby.force.permissive 1
Make sure it's successful.
STEP 1:
You have to download the latest versions of the mentioned zips below:
-Dolby Atmos RC zip (recommended version)
Download here:
https://github.com/reiryuki/Dolby-Atmos-RC4-Ryuki-Mod/releases
- Moto Equalizer Zip
Download here: https://github.com/reiryuki/Moto-Waves-Edge-Maxx-Audio-FX/releases
- Audio Compatibility Patch Module(can be found in Magisk Manager)
- Audio Modification Library Module (can be found in Magisk Manager)
STEP 2:
Copy all files to your phone storage
STEP 3:
Open Magisk Manager and install the modules in this order
1. Dolby Atmos
2. Moto Equalizer
3. Audio Compatibility Patch
4. Audio Modification Library
Now reboot your phone.
You should have two new Apps now, Dolby Atmos and the Moto Equalizer.
Congratulations, you now have Dolby Atmos and Moto Equalizer!
Short Info:
The Moto Equalizer can disappear from your app drawer, it is still there though and can be accessed by going in your music player and choosing Equalizer.
Lockscreen Visualizer??
sush1101 said:
Lockscreen Visualizer??
Click to expand...
Click to collapse
That is a rom feature....so no.
Ok Thanks
Hi,
i cant install Dolby Atmos. Patching failed /system......./vintf/manifest.xml
Any solution?
Thank you