Hey guys,
I have a Problem with my MX10 Pro and an old Sony TV, it switch always the color to pink/blue.
I read that maybe a Problem with the HDMI signal but i cant set sRGB on in options, it jump alwas back.
I also tried to switch the resolution and the frame rate but it dont help.
sorry for my bad english
I hope someone can help me to force rgb or make it run
Thanks a lot
Related
I was looking for solutions many times on this forum, google...
When I connect phone to LCD TV, I can not change resolution in Settings/Display/Resolution, because item "Resolution" is grayed, is not active. I don't need FHD resolution, because my TV is only HD ready. But when I connect phone to TV, resolution is terrible.
I have this problem on ICS, but I was hoping when I update my RAZR to Jelly Bean..., but nothing has changed. Please anyone help me.
Sorry for may ENG
Hello everyone.
First of all sorry for my english, its not very good. Im going to try to explain myself. I have installed remix os 2.0 on my notebook, and i have conected my notebook to a 47 inch full hd TV. At the notebook remix os is fullscreen, but in my tv isnt. At the display options i dont have options to change the output resolution. What can i do_
Thanks you!
Same problem for me ;( i hope this will be fixed soon.
I think that there's no option for it in RemixOS yet... Just need to wait a bit longer
rumucor said:
Hello everyone.
First of all sorry for my english, its not very good. Im going to try to explain myself. I have installed remix os 2.0 on my notebook, and i have conected my notebook to a 47 inch full hd TV. At the notebook remix os is fullscreen, but in my tv isnt. At the display options i dont have options to change the output resolution. What can i do_
Thanks you!
Click to expand...
Click to collapse
Have you tried any apps; perhaps SecondScreen would do something
Many people have this problem. Because there is no setting to cast the screen on other screen in android so it is not in Remix just wait for someone to make it or try resolution changing apps on Play store
Hi,
i have bought an mx10 tvbox, i am connecting to video composite to rca on screen fujitsu plasmavision w 50". That screen is oldie but 1080 capable, i tried to connect the tv box to the screen with the hdmi cable and a converter to dvi-d in the other side but that doesnt work, you only see the initial boot screen and then you can see on the screen OUT OF RANGE and then nothing. i have read you need to change the hdmi auto to manual resolution on the tv box, for that i used a newer display connecting hdmi to hdmi an tried all of the resolutions manually wich i changed on the newer display and then connecting to the older with the same result, no image at all only the boot MX10 screen. I´ve tried all of them including 720 and even 480 and again no result, do you know what could be happening or how can i make the tvbox to display on my older screen thru dvi-d?
thanks in advance, i have some advanced knowledge on linux/android/windows. i even tried connecting my windows laptop to the older screen with the same cable configuration and it worked perfect at 1366 x 768, have even tried changing resolution on tv box with "adb shell ws (several configurations)" same result at all, what could be posibly wrong if windows laptop displays flawless on my old screen but not my tvbox, how can i fixit please? any experienced member?
hi...i have same problem too... anyone can help??
i use MX10 Pro 6k...
i cannot find the Display settings to change the resolution
Hello!
Does anyone happen to know how to get arduino uno ambilight effect on HW video? I have an A95X F3 TV BOX and an Ambient light Application for Android. What have I not tried and I can not drive it. I have a TANIX TX6 and it works without any problems. HW mode movies light up, but F3 doesn't want to. The light has gone out. Any ideas what to install for going in HW mode not SW?
I apologize in advance for the bad English.
hello. i have the same problem did you find a solution?
GalaxyDK said:
hello. i have the same problem did you find a solution?
Click to expand...
Click to collapse
Hello!
No, I could not find a solution to the problem. I tried everything I could think of, but without success. The Tanix TX6 runs smoothly, but the A95X F3 doesn't want to.
I've just received my first android TV box, this one
https://banggood.onelink.me/zMT7/wda08nyk, and I was wondering if anyone knew where I can go to get alternative ROMs for it? I'm specifically looking for Android TV based ROMs, as it ships with standard android (pretending to be a pixel 3).
I haven't found any. It's still a very new device. There are updated stock FW, though. Not much of an improvement. Here are updated stock Images.
Hello
Same problem here, it is pretending to be Googlre pixel 3
Any idea when would someone make Android TV based ROM?
If you own one of these H618 devices, can you please run the following command on your device to see if it has malware similar to the T95 H616?
Code:
adb shell "getprop ro.product.device ; [ -d '/data/system/Corejava' ] && echo 'Corejava exists' ; ! [ -d '/data/system/Corejava' ] && echo 'Corejava not present'"
Thanks!
Hi I am trying to connect my android box T95z plus to a Samsung tv, but when I try the signal is not getting though, although the hdmi connection is found there is a red cross symbol by the hdmi icon on TV.
However I can connect the Bix to my other fire tv with no issue and same cable!
This is really driving me mad.
And advice greatfully received thanks in advance
Jonnybourne said:
Hi I am trying to connect my android box T95z plus to a Samsung tv, but when I try the signal is not getting though, although the hdmi connection is found there is a red cross symbol by the hdmi icon on TV.
However I can connect the Bix to my other fire tv with no issue and same cable!
This is really driving me mad.
And advice greatfully received thanks in advance
Click to expand...
Click to collapse
this issue is common, the tvboxes don't support every possible resolution out there, your tv may have a specific resolution or refresh rate that isn't supported by the tv box, so the tv box can't switch to the correct resolution because it doesn't exist.
i'm not by my tv box now, but if i recall correctly, there is usually an option to disable automatic switching to the correct resolution, you can turn that off so the box doesn't automatically switch to a resolution the TV chooses. then plugin the box to a monitor or another tv, choose a resolution manually on the tv box, then plug it back to the samsung tv, if still no signal, repeat the process with a different resolution.
this worked for me with 2 tv boxes Q96+ and HiMedia Q5 or Q7 i can't recall, but also hasn't worked with every box that did that, so it's a hit or miss.
good luck
You may want to try something like THIS. I had similar issues with both h616 and h618 boxes. In the settings for display, the h616 had a toggle for TV HDMI control.