Related
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Reserved
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
xperia_bird said:
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
Click to expand...
Click to collapse
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
Code:
dd if=/path/to/partition/ of=/sdcard/or/anything
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
nageen9211 said:
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
Click to expand...
Click to collapse
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Bootlooping
xperia_bird said:
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Click to expand...
Click to collapse
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
[email protected] said:
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
Click to expand...
Click to collapse
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
xperia_bird said:
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
Click to expand...
Click to collapse
Your device and model
[email protected] said:
Your device and model
Click to expand...
Click to collapse
Lenovo Z5, L78011.
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Plz make multirom twrp for moto one
anurag_xpert said:
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Click to expand...
Click to collapse
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
nageen9211 said:
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
Click to expand...
Click to collapse
Thanks for the reply. I have downladed april fastboot flashable rom from Mororola updates (link shared at telegram channel) but when i unpacked it, there was no flash script inside, so I could not flash that stock rom and I am still getting this error.
If you or somebody can share that flashall.bat script, i will be thankful.
edit: managed to flash the latest official firmware using youtube tutorial by andro guruji.
All my data was also safe.
Thanks again.
Will I get official updates after flashing this stock rom??
flashall.bat error
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Directory error
lbcsc.clx said:
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Click to expand...
Click to collapse
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
[email protected] said:
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
Click to expand...
Click to collapse
See the cmd in screenshot below
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
Can you please post the link for the july patch or if possible please provide the link for july full stock rom. I am not able to update via OTP. Tried everything.
nageen9211 said:
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Click to expand...
Click to collapse
hi i am bricked my moto
now i back to fast boot mod
how can i flash stock rom by twrp?
help me
i am horrified to brick my device again
I have just bought oneplus 7 t pro and want to root it. How do I extract boot.img from the firmware so I can patch it using magisk ? Any help in rooting this device would be greatly appreciated. Thanks
you should wait the stock rom or you can try to boot the oneplus 7t twrp and backup the boot.img
Thanks
Will try and report back
boots into the twrp 7t recovery but boot.img is not being backed up . It fails to mount any partition . adb pull command not working .
I have boot image
are you able to patch it with magisk ?
ask77 said:
are you able to patch it with magisk ?
Click to expand...
Click to collapse
unfortunately not
I have now extracted boot.img and patched it with magisk but the output image is of 36.44 MB while the original image is of 96 MB so I am a bit wary in flashing this image as I do not want to go into a boot loop also I have a boot.img and a recovery.img both are identical in size and are identified by magisk as stock boot.img . i am uploading the install log . I will research a bit more before flashing the patched boot img to achieve root
ask77 said:
I have now extracted boot.img and patched it with magisk but the output image is of 36.44 MB while the original image is of 96 MB so I am a bit wary in flashing this image as I do not want to go into a boot loop also I have a boot.img and a recovery.img both are identical in size and are identified by magisk as stock boot.img . i am uploading the install log . I will research a bit more before flashing the patched boot img to achieve root
Click to expand...
Click to collapse
try just doing fastboot boot patchedbootimghere.img
if it bootloops you can just restart the phone and it will be back to normal since its not flashed
HolyChickenGuy said:
try just doing fastboot boot patchedbootimghere.img
if it bootloops you can just restart the phone and it will be back to normal since its not flashed
Click to expand...
Click to collapse
Thanks will do that.
sorry no go . It either goes to crashdump or is stuck with the fastboot screen
ask77 said:
sorry no go . It either goes to crashdump or is stuck with the fastboot screen
Click to expand...
Click to collapse
I'm having the same results
Sent from my OnePlus 7T Pro
same there no luck. just the crash dump screen
digitalashley said:
same there no luck. just the crash dump screen
Click to expand...
Click to collapse
Make sure to check Preserve AVB 2.0/dm-verify in advance settings before patching boot.img, then use command
fastboot boot imagenamehere.img, after boot, perform direct install to preserve root.
VERY IMPORTANT:
Please make sure your boot.img version matches the ROM version . that's mean if you update your device then you have to use patch boot.img from new recovery rom.never use the old one. If they mismatch you might brick your phone and MediaTek phones are HELL to unbrick.
YOU HAVE BEEN WARNED.
Yes you can root your phone without data loss. You do not need to you type so much command line. You have to patch the stock boot image file with magisk manager. Then you have to download a a blank vbmeta.img file.(link in this post)
Then run this command
fastboot flash vbmeta vbmeta.img
fastboot flash boot patch-boot.img
%%replace patch-boot as your file name...
I guarantee you no data loss.
Remember one thing...
You must patch the correct boot image of your rom... If you to flash a wrong version of bhoot image then you have some problem.
Suppose you update miui global 11.0.5.0 from 11.0.4.0 and you use 11.0.4.0 version patch boot image file....
Then your device boot up but you can not play any music .....i do this dump thing.....but do not worry just flash currect patch boot image and your problem is gone...
Shas45558 said:
Yes you can root your phone without data loss. You do not need to you type so much command line. You have to patch the stock boot image file with magisk manager. Then you have to download a a blank vbmeta.img file.
https://forum.hovatek.com/thread-32719.html
Go to method 3....log in to download vbmeta.img file.
Then run this command
fastboot flash boot patch-boot.img
fastboot flash vbmeta vbmeta.img
%%replace patch-boot as your file name...
I guarantee you no data loss.
Remember one thing...
You must patch the correct boot image of your rom... If you to flash a wrong version of bhoot image then you have some problem.
Suppose you update miui global 11.0.5.0 from 11.0.4.0 and you use 11.0.4.0 version patch boot image file....
Then your device boot up but you can not play any music .....i do this dump thing.....but do not worry just flash currect patch boot image and your problem is gone...
Click to expand...
Click to collapse
Hey @Shas45558, I can't root MIUI V11.0.7.0.Q having tried these steps on a friend's phone yesterday. It worked on my phone on V11.0.50.Q but I also installed that update though my bootloader is still locked as you may know
nielsync said:
Hey @Shas45558, I can't root MIUI V11.0.7.0.Q having tried these steps on a friend's phone yesterday. It worked on my phone on V11.0.50.Q but I also installed that update though my bootloader is still locked as you may know
Click to expand...
Click to collapse
Do u flash vbmeta.img?? (Download from this post)
It workes for me every time...
When any update appires you should download full recovery rom reather then otq update.
Then extract and patch boot which is insiDe the recovery rom...
It will must work...
Shas45558 said:
Do u flash vbmeta.img?? (Download from this post)
It workes for me every time...
When any update appires you should download full recovery rom reather then otq update.
Then extract and patch boot which is insiDe the recovery rom...
It will must work...
Click to expand...
Click to collapse
That's exactly what I did. Downloaded the full recovery rom and extracted it. Patched the boot.img inside images folder with Magisk canary and after copied it to my PC and flashed it via fastboot. I then flashed the vbmeta after. Do you mind sharing with me your patched boot image for V.11.0.7Q? Maybe I'll have luck with that otherwise I did everything right. Its really strange.
nielsync said:
That's exactly what I did. Downloaded the full recovery rom and extracted it. Patched the boot.img inside images folder with Magisk canary and after copied it to my PC and flashed it via fastboot. I then flashed the vbmeta after. Do you mind sharing with me your patched boot image for V.11.0.7Q? Maybe I'll have luck with that otherwise I did everything right. Its really strange.
Click to expand...
Click to collapse
You should use your phone and magisk manager To patch boot image file...
Do not use computer to patch it
I give the boot file in this post which root your redmi 9 based on global v11.0.7.0....
Do not flash it on outher version...
Extract mboot7.tar you get mboot7.img....
Flash it and enjoy root on globalv11.0.7.0....
Do not forget to flash vbmeta.img....
Flash vbmeta file then patch boot file..
Good luck..
Shas45558 said:
You should use your phone and magisk manager To patch boot image file...
Do not use computer to patch it
I give the boot file in this post which root your redmi 9 based on global v11.0.7.0....
Do not flash it on outher version...
Extract mboot7.tar you get mboot7.img....
Flash it and enjoy root on globalv11.0.7.0....
Do not forget to flash vbmeta.img....
Flash vbmeta file then patch boot file..
Good luck..
Click to expand...
Click to collapse
Thanks a lot it worked!!! :good:
I've been patching using Magisk Manager canary version on the phone. What version of Magisk Manager did you use It's really strange
nielsync said:
Thanks a lot it worked!!! :good:
I've been patching using Magisk Manager canary version on the phone. What version of Magisk Manager did you use It's really strange
Click to expand...
Click to collapse
I use this version of magisk manager and it always work
Shas45558 said:
I use this version of magisk manager and it always work
Click to expand...
Click to collapse
Thanks. I've been using Magisk Manager beta/canary and it seems it does not patch the boot image properly. You are the best.
Thanks for the post. It helped me to root my redmi note 9.
nielsync said:
Thanks. I've been using Magisk Manager beta/canary and it seems it does not patch the boot image properly. You are the best.
Click to expand...
Click to collapse
Welcome. Redmi 9 and redmi note 9 are are based on same chipset mt6768....
And so the process help you. I think it is the same to root any device running on Android 10.
And vbmeta.img which I provide upper post, is a universal vbmeta.img. you can use it to flash any Android device which has vbmeta partition because this vbmeta.img is a dummy file or you can call it as a blank file...
Shas45558 said:
Welcome. Redmi 9 and redmi note 9 are are based on same chipset mt6768....
And so the process help you. I think it is the same to root any device running on Android 10.
And vbmeta.img which I provide upper post, is a universal vbmeta.img. you can use it to flash any Android device which has vbmeta partition because this vbmeta.img is a dummy file or you can call it as a blank file...
Click to expand...
Click to collapse
My issues was patching using the canary version of Magisk Manager which isn't stable enough and was probably not patching the boot image properly as opposed to Magisk Manager 7.5.1 which is the stable version. Nice explanation on the vbmeta.img file.
VERY IMPORTANT:
Please make sure your ROM version matches the ROM version of those patched boot image and files. If they mismatch you might brick your phone and MediaTek phones are HELL to unbrick.
YOU HAVE BEEN WARNED.
For the post author:
Thanks for your effort
I understand you are trying to help and that you put a note at the end of your post. But please make it clear at the BEGINING, that this method is valid for this specific ROM Version "xx.x.xx.x.x"
I guess this still doesn't unlock the bootloader, and what about system updates?
Kiwironic said:
VERY IMPORTANT:
Please make sure your ROM version matches the ROM version of those patched boot image and files. If they mismatch you might brick your phone and MediaTek phones are HELL to unbrick.
YOU HAVE BEEN WARNED.
For the post author:
Thanks for your effort
I understand you are trying to help and that you put a note at the end of your post. But please make it clear at the BEGINING, that this method is valid for this specific ROM Version "xx.x.xx.x.x"
Click to expand...
Click to collapse
Ok i do ir on top and bottom of the post and thanks for your advice:good::good:
I have an issue. I cannot install any custom recovery on Redmi 9, no matter how much I try (Twrp or PBRP). Every time the phone reboots directly. There is anyone that can help me?
rizelgeorgel said:
I have an issue. I cannot install any custom recovery on Redmi 9, no matter how much I try (Twrp or PBRP). Every time the phone reboots directly. There is anyone that can help me?
Click to expand...
Click to collapse
Download pbrp from official website.then extract it and you will get a .img file.flash it via fastboot mood and the cmd is
fastboot flash recovery pbrp.img
*Change pbrb.img according to your file name.
One big question..did you unlock your bootloader and root your device?
Thank you very much! I succeeded according to your advice!
shas hows pbrp?
regarding flashing?
mhark.moby said:
shas hows pbrp?
regarding flashing?
Click to expand...
Click to collapse
Pbrp is in beta testing....so it has some bug and there's no use to install..
Buenas tardes tengo problemas al cargar el parche de magisk en redmi 9. Cuando cargo el boot.img parchado de magisk el tlfn queda en bootloop estoy en la version 11.0.8 global.
Hi all and sorry for my bad english in first!!
i live in italy and i've buyed(but still not recieved) one oneplus 9r from china whit oxygenos rom on board..
When it comes i want to root & debloat it, but i've some queustion cause in last year i've used only device with custom rom!.
first of all i wan't to root the phone, but preserve the possibility to update the OS with ota. if i understand right it's possible with magisk, can please someone tell me the correct step to make?
after root i vant to uninstall not necessary app for my utilization (facebook/instagram/netflix, red cable and oneplus account, google app, gdrive, google photo and most of BigG apps cause i'm using only gmail/yt/maps/ an store!).
the question is.... if i uninstall this app it will be re installed in future ota?
Thanks in advice!
Step1 : unlock bootloader, this will wipe the storage, then setup the device once again then enable usb debugging in developer options.
You can use this
Tool to make (tool all in one) your life easier : https://sourceforge.net/projects/tool-all-in-one/files/TOOL_ALL_IN_ONE_1.0.6.1.zip/download
you should select 8t as 9r is not supported officially
at the moment.
Step2: update the phone to latest version , right now it's 11.2.5.5
Step 3: download the same version of the oxygen is ota wether from xda, OnePlus official site , oxygen updater ( make sure it is full version).
Step4: on pc now extract only the payload.bin file in the input of the payload extracter ,
Now use the payload extracter ,
Run .exe and get boot.img .
payload_dumper_tool_by_ius.zip
drive.google.com
(MAKE SURE THE PHONE OS VERSION AND BOOT IMG VERSION IS SAME)
Step 5: install magisk manager on phone, now patch the boot.img that you extracted earlier. Copy this patched boot.img in platforms tool folder(I hope that u have installed the platform tools and adb & fastboot ).
Step 6: open terminal there in platform tools , use the tool all in one to boot your phone in fast boot mode,then flash patched boot.img using.
Fastboot devices
Fastboot flash boot_a patched.img
Fastboot flash boot_b patched.img
Bingo got rooted.
Step 7( optional) : now properly restart the phone by opening magisk , then install universal safety net fix, debloat modules in magisk.
You can use lucky patcher to debloat unnecessary things (which don't exist as it is oxygen os)
Now in future if your phone gets ota make sure you disable all magisk modules then download the full version of ota from oxygen updater & update it locally & do not restart.
go to magisk ,
flash magisk to inactive slot.
restart now,
REnable the modules. (Tip don't enable the lucky patcher module this will put you in bootloop)
enjoy the ota .
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
lvints said:
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
Click to expand...
Click to collapse
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
Way better than twrp just follow the steps u won't lose anything
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
So how did it go?
Rajveer chauhan said:
So how did it go?
Click to expand...
Click to collapse
I've already downloaded the files, but I haven't tested them yet.
I'll leave it for the weekend, if there's a problem I can solve it with peace of mind.
Sir have you tried changing the font of your 9R?
I've been looking on the magisk forums or some app but I haven't had success.
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Rajveer chauhan said:
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Click to expand...
Click to collapse
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Same version
lvints said:
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Click to expand...
Click to collapse
.
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
I flashed the img file and it booted to OrangeFox but I cannot press anything as the screen does not react. What is the solution for it?
It's is compatible with oos 11
Not with oos 12, any custom roms
Rajveer chauhan said:
It's is compatible with oos 11
Not with oos 12, any custom roms
Click to expand...
Click to collapse
I was on OOS 11. The 11.2.8.8.LE28DA.
Flashed it, boot up but cannot press anything. How can I go back to the original boot?
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Rajveer chauhan said:
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Click to expand...
Click to collapse
Thanks I got back to the original boot, but now how can I root with Magisk?
@Rajveer chauhan
Hello sr
Have you updated your 9r for A12 ? If yes, how did you do it? Would it be possible to go from A11 (11.2.8.8) to A12 (C.33)?
Hi guys so Many users are facing issue while they are rooted and twrp installed on there phone.
They can't able to Flash update through stock settings OR via twrp if they tries to flash it via twrp manually facing no wifi and Bluetooth.
So here is the process to flash any incremental update via twrp just we need update zip, vbmeta image and boot image of old oos version respective to your new update means if. We are upgrading to V11 we need V10 boot img
U can use following commands to extract your current stock boot img after connecting to PC
adb shell
dd if=/dev/block/sdc49 of=/sdcard/boot.img
exit
Note: Remember this process will replace your twrp and removes root to gain root access. We need to repeat twrp installation shown in the following tutorial
TUTORIAL TWRP AND ROOT NORD 2 OXYGEN OS 11 ( Links updated!)
SO finally I successfully rooted with TWRP and root access.thanks to all developers @Eastw1ng @TheMalachite Following are all download links combined in one post Also there are two threads like unlocking boot loader and twrp but there are some...
forum.xda-developers.com
You can gain root acess only by flashing magisk.zip file after step no 7 given under instructions but I didn't tested it yet.
DOWNLOADS:
1)Download update v11 from Telegram :
®D$ in OnePlus Nord 2 Community
t.me
2) DOWNLOAD V13:
®D$ in OnePlus Nord 2 Community
t.me
3) Download V14 update zip:
️ in OnePlus Nord 2 Community
t.me
4) Download A15 update zip:
e9708c8610bae8fa64d76e0f9a55dda444ce981a.zip
drive.google.com
We can also download update in system update process. Just download OTA update and when we boot in twrp just click install and then go to following folder there you will find update.zip
/data/OTA-package/update.zip
5)A17 update zip:
https://t.me/OnePlusNord2GlobalOfficial/81364
Download vbmeta:
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download boot.img:
1) upgrade from v10 to v11(indian)
boot.img
drive.google.com
2) upgrade from v11 to v13(indian)
bootnew.img
drive.google.com
3)Upgrade from v13 to v14:
Rose in OnePlus Nord 2 Community
t.me
4)Upgrade from A14 to A15:
Rose in OnePlus Nord 2 Community
t.me
5)15 Boot img india (update from A15 to AA16)
https://t.me/OnePlusNord2GlobalOfficial/57795
5)A16 boot.img to upgrade to A17:
Rose in OnePlus Nord 2 Community
A16 stock boot image
t.me
6)17 BOOT IMG Upgrade to A18 (boot.img vbmeta zip extract file)
Rose in OnePlus Nord 2 Community
t.me
Boot img for nord 2 EU REGION :
File folder on MEGA
mega.nz
This another thread for all boot img of EU region
Stock Boot & Patched images Oneplus Nord 2 Oxygen 11.3 DN2103_11_A.07/09/10 EEA
Flash at your own risk. I am not responsible for any damage or data loss to the device during this process! https://mega.nz/folder/fZx2nBaR#Q33lJstFRMQg6_0j7Z0TJw Special Thanks: @HofaTheRipper @phhusson
forum.xda-developers.com
Instructions :
1) Download all file from the link given under this thread place them at one place on your phone so it can be easily accessible when we boot in TWRP.
2)Now to boot in TWRP use following root acess app called as advance reboot. Open it and click reboot to recovery
Advanced Reboot Tools [ROOT] - Apps on Google Play
Provides lots of options for restarting your device; excellent for tweakers.
play.google.com
Or you can use adb command after connecting phone to pc in USB debugging mode.
adb reboot recovery
3) when phone boot in TWRP click install tab now go to folder where we placed All files.
4) click install image tab at bottom now you we see image files boot. img and vbmeta.img that we downloaded
5)now select boot.img and then select boot partation and slide bottom bar after successful installation
6)click reboot and select recovery phone will boots back to twrp( This step is optional)
7)Now again click Install and find our old folder now select update.zip file and slide bottom bar it will take 2min for complete falshing of zip.
8)now agian click install now click install image and select vbmeta.img
9)Now click reboot system phone will reboots and take 10min.
Now you are successfully updated and have new OOS 11.3 A11 version on your phone without any issues.
Follow the video:
New update v13 update process :
New update A14 update process:
New update A15:
New update A16:
New A18 update:
pankspoo said:
Hi guys so Many users are facing issue while they are rooted and twrp installed on there phone.
They can't able to Flash update via twrp if they tries to flash it via twrp manually facing no wifi and Bluetooth.
So here is the process to flash any incremental update via twrp just we need update zip, vbmeta image and boot image of old oos version respective to your new update means if. We are upgrading to V11 we need V10 boot img.
Follow the video:
Click to expand...
Click to collapse
good Instructions! Reboot after flashing boot.img isnt necessary. OTA Update zip can be downloaded within OTA App in Settings (do not press reboot). After downloading you can reboot to TWRP and the file location is: /data/OTA-package/update.zip.
HofaTheRipper said:
good Instructions! Reboot after flashing boot.img isnt necessary. OTA Update zip can be downloaded within OTA App in Settings (do not press reboot). After downloading you can reboot to TWRP and the file location is: /data/OTA-package/update.zip.
Click to expand...
Click to collapse
Yes but I don't want to go to automatic reboot and flashing process of OTA Update installation after download which may cause some issues for new users.
The old boot.img I image is the stock one not rooted right? How can you extract it from your firmware if you're not rooted? From the Nandroid backup maybe?
Edit, found out: https://forum.xda-developers.com/t/how-to-extract-your-boot-img-from-any-rom-adb.3760210/ Just had to google it
Don't wo
Raygen said:
The old boot.img I image is the stock one not rooted right? How can you extract it from your firmware if you're not rooted? From the Nandroid backup maybe?
Click to expand...
Click to collapse
Donts worry from here every new updates we will provide all stock boot. img
Thread updated for latest update v13 for India region
HI. This is my 1st OnePlus and OxygenOS. I am now on DN2103_11_A.11 and OTA is available. It is DN2103_11_A.12
Basically I can flash it from TWRP and I do not need to save and flash boot.img afterwards bec OS will be the same version. Is that so? Or am I wrong? And I have to follow threads instructions ?
Thank you
jis251 said:
HI. This is my 1st OnePlus and OxygenOS. I am now on DN2103_11_A.11 and OTA is available. It is DN2103_11_A.12
Basically I can flash it from TWRP and I do not need to save and flash boot.img afterwards bec OS will be the same version. Is that so? Or am I wrong? And I have to follow threads instructions ?
Thank you
Click to expand...
Click to collapse
NO u need A11 boot img of only DN 2103 firmware not indian I don't have that now first flash that then flash update zip of v12 then flash Vbmeta now that's done
pankspoo said:
NO u need A11 boot img of only DN 2103 firmware not indian I don't have that now first flash that then flash update zip of v12 then flash Vbmeta now that's done
Click to expand...
Click to collapse
HI. And thx for quick reply. I mange now, thank you.
DN2103 A.11 stock boot img :
HofaTheRipper said:
DN2103 A.11 stock boot img :
Click to expand...
Click to collapse
You got it do it now
HofaTheRipper said:
DN2103 A.11 stock boot img :
Click to expand...
Click to collapse
HI and thx. I have made TWRP backup, boot and vbmeta
So I can first restore boot then flash OTA and then restore vbmeta, yes? (Version 11)
I do not have to flash boot and vbmeta, restore does the same??
jis251 said:
HI and thx. I have made TWRP backup, boot and vbmeta
So I can first restore boot then flash OTA and then restore vbmeta, yes? (Version 11)
I do not have to flash boot and vbmeta, restore does the same??
Click to expand...
Click to collapse
Don't use backup boot image restore process.
Just download above boot image given
https://forum.xda-developers.com/attachments/boot_stock_a11-img.5461307/
and vbmeta image given in. My thread
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
And u r update zip of device of your region not mine
First flash boot img then. Install update zip then. Flash Vbmeta done
pankspoo said:
Don't use backup boot image restore process.
Just download above boot image given
https://forum.xda-developers.com/attachments/boot_stock_a11-img.5461307/
and vbmeta image given in. My thread
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
And u r update zip of device of your region not mine
First flash boot img then. Install update zip then. Flash Vbmeta done
Click to expand...
Click to collapse
Thx. OK I do that.
Magisk is installed (patched) to boot image so after OTA and Vbmeta I flash Magisk to keep root.
jis251 said:
Thx. OK I do that.
Magisk is installed (patched) to boot image so after OTA and Vbmeta I flash Magisk to keep root.
Click to expand...
Click to collapse
Yes
pankspoo said:
Download boot.img:
1) upgrade from v10 to v11(indian)
boot.img
drive.google.com
2) upgrade from v11 to v13(indian)
bootnew.img
drive.google.com
Click to expand...
Click to collapse
Do the boot.img files in the original post only work on the Indian variant? Where can I get the A11 boot.img for the European variant if I want to update to A12?
NetSoerfer said:
Do the boot.img files in the original post only work on the Indian variant? Where can I get the A11 boot.img for the European variant if I want to update to A12?
Click to expand...
Click to collapse
Ok I will upload in thread
NetSoerfer said:
Do the boot.img files in the original post only work on the Indian variant? Where can I get the A11 boot.img for the European variant if I want to update to A12?
Click to expand...
Click to collapse
File folder on MEGA
mega.nz
Use boot images from stock folder
pankspoo said:
U can use following commands to extract your current stock boot img after connecting to PC
adb shell
dd if=/dev/block/sdc49 of=/sdcard/boot.img
exit
Click to expand...
Click to collapse
Still trying to wrap my head around this (although updating worked fine from A11 to A12 on my EEA variant, thanks @pankspoo!).
Can I actually extract a stock boot.img from a Magisk-rooted phone? Is it stock (in which case why is root removed by the update.zip) or is it modified (in which case, why can I extract it as stock)?
NetSoerfer said:
Still trying to wrap my head around this (although updating worked fine from A11 to A12 on my EEA variant, thanks @pankspoo!).
Can I actually extract a stock boot.img from a Magisk-rooted phone? Is it stock (in which case why is root removed by the update.zip) or is it modified (in which case, why can I extract it as stock)?
Click to expand...
Click to collapse
You can use those adb commands while booted in TWRP, without being rooted. So you'll extract the stock boot image