I have unlocked, disabled encryption and rooted Pocophone using Magisk , then flashed a custom kernel.
If a new update comes in for Pocophone, I know that I cannot directly go flash the OTA update because it will cause bootloop or brick my device. What to do before updating from previous to latest with custom kernel and root? (e.g. MIUI 9 > MIUI 10)
https://forum.xda-developers.com/po...-f1-unlock-bootloader-custom-t3839405/page245
If rooted and with TWRP, I would never recommend flashing via updater app.
I suggest you follow these steps to update the same way I did. I did this from 10.0.6 (oreo) to 10.1.3 (android pie)
1. DOWNLOAD THE ROM (either via updater or from xiaomi.eu, but if using updater, click install later, just let the zip download.
2. disable all MAGISK MODULES
3. reboot to recovery and flash the latest ROM
4. wipe cache and dalvik
5. FLASH latest FED from this post
6. Flash latest Magisk. Reboot
Again, make sure to follow these steps exactly so as not to mess anything up. Careful and
mecoromeo said:
https://forum.xda-developers.com/po...-f1-unlock-bootloader-custom-t3839405/page245
If rooted and with TWRP, I would never recommend flashing via updater app.
I suggest you follow these steps to update the same way I did. I did this from 10.0.6 (oreo) to 10.1.3 (android pie)
1. DOWNLOAD THE ROM (either via updater or from xiaomi.eu, but if using updater, click install later, just let the zip download.
2. disable all MAGISK MODULES
3. reboot to recovery and flash the latest ROM
4. wipe cache and dalvik
5. FLASH latest FED from this post
6. Flash latest Magisk. Reboot
Again, make sure to follow these steps exactly so as not to mess anything up. Careful and
Click to expand...
Click to collapse
Found a custom recovery which is a TWRP based, Orangefox, can I use this? They say it can be used for OTA updates for MIUI
mecoromeo said:
https://forum.xda-developers.com/po...-f1-unlock-bootloader-custom-t3839405/page245
If rooted and with TWRP, I would never recommend flashing via updater app.
I suggest you follow these steps to update the same way I did. I did this from 10.0.6 (oreo) to 10.1.3 (android pie)
1. DOWNLOAD THE ROM (either via updater or from xiaomi.eu, but if using updater, click install later, just let the zip download.
2. disable all MAGISK MODULES
3. reboot to recovery and flash the latest ROM
4. wipe cache and dalvik
5. FLASH latest FED from this post
6. Flash latest Magisk. Reboot
Again, make sure to follow these steps exactly so as not to mess anything up. Careful and
Click to expand...
Click to collapse
Does this way OTA update works when i modified system partition?? I'm getting error 7 in TWRP. Any idea?
---------- Post added at 12:02 PM ---------- Previous post was at 12:01 PM ----------
mecoromeo said:
https://forum.xda-developers.com/po...-f1-unlock-bootloader-custom-t3839405/page245
If rooted and with TWRP, I would never recommend flashing via updater app.
I suggest you follow these steps to update the same way I did. I did this from 10.0.6 (oreo) to 10.1.3 (android pie)
1. DOWNLOAD THE ROM (either via updater or from xiaomi.eu, but if using updater, click install later, just let the zip download.
2. disable all MAGISK MODULES
3. reboot to recovery and flash the latest ROM
4. wipe cache and dalvik
5. FLASH latest FED from this post
6. Flash latest Magisk. Reboot
Again, make sure to follow these steps exactly so as not to mess anything up. Careful and
Click to expand...
Click to collapse
Darklouis said:
Found a custom recovery which is a TWRP based, Orangefox, can I use this? They say it can be used for OTA updates for MIUI
Click to expand...
Click to collapse
You tried Orangefox? Been able to upgrade?
nilg0lap said:
Does this way OTA update works when i modified system partition?? I'm getting error 7 in TWRP. Any idea?
---------- Post added at 12:02 PM ---------- Previous post was at 12:01 PM ----------
You tried Orangefox? Been able to upgrade?
Click to expand...
Click to collapse
About to try it.. I have to download the stock rom firmware before trying the ota update.. Here's the link https://forum.xda-developers.com/po...orangefox-recovery-project-beta-t3853233/amp/
I flashed the custom recovery and no problem at all.. But still haven't to try ota update via the Orangefox. I will update you later if it was a success..
Darklouis said:
About to try it.. I have to download the stock rom firmware before trying the ota update.. Here's the link https://forum.xda-developers.com/po...orangefox-recovery-project-beta-t3853233/amp/
I flashed the custom recovery and no problem at all.. But still haven't to try ota update via the Orangefox. I will update you later if it was a success..
Click to expand...
Click to collapse
Please let me know! I'm thinking about flashing 8.11.29 then download ota via updater then flash it through OrangrFox to 8.12.7. What do you think?
im on custom rom, with TWRP recovery and unlocked.
I want to return to stock stable pie MIUI rom. can I just download the rom and flash it using TWRP (i want to keep the custom rom )? any specific steps i need to follow. kind of confused
nilg0lap said:
Please let me know! I'm thinking about flashing 8.11.29 then download ota via updater then flash it through OrangrFox to 8.12.7. What do you think?
Click to expand...
Click to collapse
Damn it. I have a honest mistake. I accidentally wiped system instead only data and dalvik cache. Now im trying to download the stock firmware to restore the system partition. Sorry for the delay. I may post the update tomorrow.
nilg0lap said:
Please let me know! I'm thinking about flashing 8.11.29 then download ota via updater then flash it through OrangrFox to 8.12.7. What do you think?
Click to expand...
Click to collapse
Damn it. I made a honest mistake. I accidentally wiped system instead only data and dalvik cache. Now im trying to download the stock firmware to restore the system partition. Sorry for the delay. I may post the update tomorrow.
denraisr said:
im on custom rom, with TWRP recovery and unlocked.
I want to return to stock stable pie MIUI rom. can I just download the rom and flash it using TWRP (i want to keep the custom rom )? any specific steps i need to follow. kind of confused
Click to expand...
Click to collapse
Please refer to this guide. But first, flash OrangeFox recovery via fastboot or direct flash it on your current recovery
https://forum.xda-developers.com/po...cial-orangefox-recovery-project-beta-t3853233
Darklouis said:
Please refer to this guide. But first, flash OrangeFox recovery via fastboot or direct flash it on your current recovery
https://forum.xda-developers.com/po...cial-orangefox-recovery-project-beta-t3853233
Click to expand...
Click to collapse
why does it need to be OrangeFOX?
denraisr said:
why does it need to be OrangeFOX?
Click to expand...
Click to collapse
Because it is the only custom recovery (I think) for poco f1 to support ota updates...
Darklouis said:
Damn it. I made a honest mistake. I accidentally wiped system instead only data and dalvik cache. Now im trying to download the stock firmware to restore the system partition. Sorry for the delay. I may post the update tomorrow.
Click to expand...
Click to collapse
Let me know by then!! Thanks!
Sent from my POCOPHONE F1 using XDA Labs
nilg0lap said:
Let me know by then!! Thanks!
Sent from my POCOPHONE F1 using XDA Labs
Click to expand...
Click to collapse
Guys some little bad news, I downloaded beta full rom instead of stable rom, it is currently working fine. Now im downloading the weekly update and will try flash it via OrangeFox twrp if it worked.
I will try stable rom next time.. Sorry for the bad news.
Edit: How to upload pictures here?
Darklouis said:
Guys some little bad news, I downloaded beta full rom instead of stable rom, it is currently working fine. Now im downloading the weekly update and will try flash it via OrangeFox twrp if it worked.
I will try stable rom next time.. Sorry for the bad news.
Edit: How to upload pictures here?
Click to expand...
Click to collapse
I will upload screenshot of the OrangeFox recovery log during the ota update
Darklouis said:
Guys some little bad news, I downloaded beta full rom instead of stable rom, it is currently working fine. Now im downloading the weekly update and will try flash it via OrangeFox twrp if it worked.
I will try stable rom next time.. Sorry for the bad news.
Edit: How to upload pictures here?
Click to expand...
Click to collapse
Okay with beta ROM! Did it flash the update successfully?
Sent from my POCOPHONE F1 using XDA Labs
nilg0lap said:
Okay with beta ROM! Did it flash the update successfully?
Sent from my POCOPHONE F1 using XDA Labs
Click to expand...
Click to collapse
Flashed ota failed. It showed an error in the middle of the flashing. I didn't took a screenshot because it instantly reboot the system then continuous bootloop happend... I don't know why but I'm going to make sure what was going on.
I disabled the force encryption, enabled ota survival, etc. damn..
I will try the stable since the beta failed. Just wait for hours for the update. Sorry guys..
Darklouis said:
Flashed ota failed. It showed an error in the middle of the flashing. I didn't took a screenshot because it instantly reboot the system then continuous bootloop happend... I don't know why but I'm going to make sure what was going on.
I disabled the force encryption, enabled ota survival, etc. damn..
I will try the stable since the beta failed. Just wait for hours for the update. Sorry guys..
Click to expand...
Click to collapse
Is it error 7?? I know you did but are u sure had followed steps from the orangefox recovery thread for setting up miui? I dont think stable or beta wont make a difference!!
Sent from my POCOPHONE F1 using XDA Labs
nilg0lap said:
Is it error 7?? I know you did but are u sure had followed steps from the orangefox recovery thread for setting up miui? I dont think stable or beta wont make a difference!!
Sent from my POCOPHONE F1 using XDA Labs
Click to expand...
Click to collapse
Omg yes! It was Error 7.. If stable rom shows same results. Time to plan B.
Plan B is to try another custom recovery that supports ota updates, ota survival, and disables the force encryption to the data partition.
Darklouis said:
Omg yes! It was Error 7.. If stable rom shows same results. Time to plan B.
Plan B is to try another custom recovery that supports ota updates, ota survival, and disables the force encryption to the data partition.
Click to expand...
Click to collapse
Before moving to plan B can u try this??
https://forum.xda-developers.com/showthread.php?t=2522762
P.S: you wont get "assert" command in the updater script, but u can erase "get prop" command and try this.
You will find the update zip file in "Downloaded_rom" folder in internal storage
Sent from my POCOPHONE F1 using XDA Labs
Related
A reddit user captured his link to the DP
Here is the link
https://android.googleapis.com/pack.../f9cb176ee75399a48e927d9f1bd6aeb6a643272c.zip
Credit: https://m.reddit.com/r/Nexus6P/comments/5edfam/captured_my_ota_url/?compact=true
Flash guide: *should* work
1. Boot twrp on DP1
2. flash SU of choice
3. reboot
4. install FlashFire from play store
5. Select "Flash firmware package"
6. Select the zip
7. Flash it!
**** A FEW DISCLAIMERS
**** TWRP seems to be based on 6.0.1 and the OTA can only be flashed on 7.1.1
**** In this case twrp will NOT flash this OTA file
**** FlashFire IS REQUIRED
**** I am not google. Yes I am sorry that force encrypt wiped your data or you got stuck in
**** a boot loop because you flashed it incorrectly BUT I am NOT google, I am NOT even
**** the person who captured the link for the ota ALL I DID WAS SHARE IT
**** If your data partition got wiped, you got stuck in a boot loop, or the guide didn't work
**** chances are you did something wrong
**** if you would like support but Google up in the DMs
**** I am happy to help just know I won't troubleshoot what you screwed up
Would we get a full OTA as well?
gqukyo said:
Would we get a full OTA as well?
Click to expand...
Click to collapse
If by full OTA you mean full ROM zip, here it is.
WelcomeToTheSkye said:
A reddit user captured his link to the DP
Here is the link
https://android.googleapis.com/pack.../f9cb176ee75399a48e927d9f1bd6aeb6a643272c.zip
Credit: https://m.reddit.com/r/Nexus6P/comments/5edfam/captured_my_ota_url/?compact=true
Click to expand...
Click to collapse
Sorry for being a noob but do I flash the zip file through TWRP or is there some other way? I am rooted with custom recovery on DP1.
Thanks
marmeak7 said:
Sorry for being a noob but do I flash the zip file through TWRP or is there some other way? I am rooted with custom recovery on DP1.
Thanks
Click to expand...
Click to collapse
If you're rooted, use flash fire from play. It restores twrp and root after updating. Haven't used any other method. No problems. Best app ever.
Just updated. Sound louder, November security patch and overall smoother scrolling.
No regrets getting the 6P. Amazing phone.?
It work fined at my Nexus 6p. All the rooted apps working fine. Thank you very much for your sharing. Appreciated it.
Just curius, has anyone of you guys unencrypted?
I installed it with flashfire but I'm still at DP1... Am I doing something wrong?
I installed it as flash zip or ota but nothing still got the message to update.
Is it because I have installed custom kernel?
Can't flash it in TWRP --> error
edit: I got E3001: the build fingerprint doesn't match. How can I fix this?
I succesfully flashed using Flashfire.
First thing I noticed is the many (repeating) superuser notifications I get for apps getting root during boot.
DRD70 said:
I installed it with flashfire but I'm still at DP1... Am I doing something wrong?
I installed it as flash zip or ota but nothing still got the message to update.
Is it because I have installed custom kernel?
Click to expand...
Click to collapse
the same for me... I only have twrp and have modified system... maybe is because of that... but I tought that would not be a problem... guess I'm going the twrp way
hmm, now I get it... this is not a full ota file.
Will I be able to flash it via TWRP like I did with the full OTA file from DP1 ??
^You need the full ota not this type of ota...
So this is the update from DP1 to DP2, correct? Is there any other way to install it besides with Flashfire? I've always installed from my PC, so is there any way to sideload it or install the zip through TWRP?
DRD70 said:
I installed it with flashfire but I'm still at DP1... Am I doing something wrong?
I installed it as flash zip or ota but nothing still got the message to update.
Is it because I have installed custom kernel?
Click to expand...
Click to collapse
You must be on dp1 and select flash firmware package not flash zip
ahmd gomaa said:
You must be on dp1 and select flash firmware package not flash zip
Click to expand...
Click to collapse
I was on dp1 and my first selection was firmware package and nothing happened. So i tried the other with the same outcome.
I finally revert it to stock and got ota update the dp2 since I'm a beta tester and root it again.
Rooted with TWRP on NPF10C
So I'm rooted and have TWRP installed, how can I update to DP2 ?
aakash dabrase said:
So I'm rooted and have TWRP installed, how can I update to DP2 ?
Click to expand...
Click to collapse
Install FlashFire from the play store and select firmware
swa100 said:
Can't flash it in TWRP --> error
edit: I got E3001: the build fingerprint doesn't match. How can I fix this?
Click to expand...
Click to collapse
Noted it in the op
Twrp is based on 6.0.1 afaik just use FlashFire
WelcomeToTheSkye said:
Install FlashFire from the play store and select firmware
Click to expand...
Click to collapse
Here's what I did:
1. Downloaded the OTA (137 MB) on pc.
2. Copied it to phone.
3. Selected Flash OTA in flashfire and selected the zip.
4. Flashfire failed to do it.
Should I use flash firmware option instead of flash OTA?
Also there are further options to select like recovery etc. What about them?
aakash dabrase said:
Here's what I did:
1. Downloaded the OTA (137 MB) on pc.
2. Copied it to phone.
3. Selected Flash OTA in flashfire and selected the zip.
4. Flashfire failed to do it.
Should I use flash firmware option instead of flash OTA?
Also there are further options to select like recovery etc. What about them?
Click to expand...
Click to collapse
Yep select firmware (it says that in op) select what you would like to keep
Guys please help me.. I have a query.
I just unlocked bootloader and want to follow the following procedure, please tell me if I'm doing anything wrong
Flash twrp using fastboot command
Flash lazy flasher using twrp
Flash magisk(for root purpose) using twrp
Reflash stock recovery img using fastboot command
If i follow the above procedure will there be any problem and also will I be able to install system updates using updater app??
why do u even want to reflash ur stock recovery TWRP is much better stay onit.!!! and first flash magisk and then lazy flasher and everything will be fine
The only reason I want to flash stock recovery is OTA updates..
Don't worry about OTA u can always manually download the update and flash it using TWRP
leo_pard2331 said:
Don't worry about OTA u can always manually download the update and flash it using TWRP
Click to expand...
Click to collapse
You mean I can install the update package without the need to download entire 1.5gb package every time?
night_mare said:
You mean I can install the update package without the need to download entire 1.5gb package every time?
Click to expand...
Click to collapse
You need full package everytime.
sachin n said:
You need full package everytime.
Click to expand...
Click to collapse
So for every update I have to flash the entire rom + magisk + lazy flasher? And Is clean flash necessary every time?
night_mare said:
So for every update I have to flash the entire rom + magisk + lazy flasher? And Is clean flash necessary every time?
Click to expand...
Click to collapse
Most likely!
Ive no idea about MIUI Roms tho. But I believe the same ^
Clean install via twrp everytime, would be good to go.
night_mare said:
So for every update I have to flash the entire rom + magisk + lazy flasher? And Is clean flash necessary every time?
Click to expand...
Click to collapse
You can dirty flash new update
No need of clean flashing
And also you dont need to flash magisk and lazyflasher after flashing the update
Just the update zip thats all
leo_pard2331 said:
You can dirty flash new update
No need of clean flashing
And also you dont need to flash magisk and lazyflasher after flashing the update
Just the update zip thats all
Click to expand...
Click to collapse
But flashing update zip restores stock recovery right?
night_mare said:
But flashing update zip restores stock recovery right?
Click to expand...
Click to collapse
Yup
But after flashing the update zip file flash the twrp.img file
That should fix it
i have nearly the same problem i just wanna flash dolby thats all n dont wanna break ota updates. so i just wanna know
if i unlock bootloader n boot into twrp recovery("fastboot boot recovery.img" this command will not wipe stock recovery) and flash dolby then im able to receive n install ota updates(incremental and full package) or not? what u say guys?
arjitkumarsingh said:
i have nearly the same problem i just wanna flash dolby thats all n dont wanna break ota updates. so i just wanna know
if i unlock bootloader n boot into twrp recovery("fastboot boot recovery.img" this command will not wipe stock recovery) and flash dolby then im able to receive n install ota updates(incremental and full package) or not? what u say guys?
Click to expand...
Click to collapse
You cannot flash dolby using stock recovery bro.. first you have to flash TWRP recovery. The fastboot command loads whatever recovery your phone contains. It will not flash TWRP
night_mare said:
You cannot flash dolby using stock recovery bro.. first you have to flash TWRP recovery. The fastboot command loads whatever recovery your phone contains. It will not flash TWRP
Click to expand...
Click to collapse
no bro this command will boot temporarily into custom recovery. search on google. so what u say now is it possible ?
---------- Post added at 04:31 PM ---------- Previous post was at 04:24 PM ----------
arjitkumarsingh said:
no bro this command will boot temporarily into custom recovery. search on google. so what u say now is it possible ?
Click to expand...
Click to collapse
im assuming if it is possible then i may not b able to install incremental updates while full packege will wipe dolby atmos in the process of installation.
m i right?
Found the link that explain the way: https://forum.xda-developers.com/red...overy-t3718203
So, in my understanding, fastboot twrp, use it to install magisk to root it.
It will remain the stock recovery and also ota update as fastboot does not flash the TWRP. Seems to be a good news to me.
If I need to install ARISE Sound System, I need to use the same way to do it too? Anyone has tried it before?
Please help close this thread as I have found the answer. Thanks and sorry.
thomas140 said:
Please help close this thread as I have found the answer. Thanks and sorry.
Click to expand...
Click to collapse
Can you post the solution
MasterFURQAN said:
Can you post the solution
Click to expand...
Click to collapse
I'm not sure why he didn't post the solution but this thread is similar to this one,
https://r.tapatalk.com/shareLink?ur...share_tid=3848983&share_fid=3793&share_type=t
Skickat från min POCOPHONE F1 via Tapatalk
Zeggi said:
I'm not sure why he didn't post the solution but this thread is similar to this one,
https://r.tapatalk.com/shareLink?ur...share_tid=3848983&share_fid=3793&share_type=t
Skickat från min POCOPHONE F1 via Tapatalk
Click to expand...
Click to collapse
I am the Op in both this and that post, that's why I am requesting to close this thread here. sorry for the trouble.
The answer is in the link here: https://forum.xda-developers.com/po...der-custom-t3839405/post77773929#post77773929
TheHappyBuddhist quoted that "You can download the full rom from MIUI website and flash it via TWRP. You can flash an update over existing software via TWRP and no need to reinstall anything. But if you are taking an ota update (not via TWRP), then you will have to start from the scratch. FED is to be run everytime you make an update as stock MIUI will encrypt the phone otherwise. If you want your phone to be encrypted, then don't flash it - your phone will encrypt itself before rebooting. The newest FED in OP contains the newest Magisk too."
So I give up the thinking of OTA update while TWRP is available. I will go through install TWRP, then force encryption disabler and magisk. Whenever there is new update, will update via TWRP.
Steps I think to do for new phone:
1) Run OTA update to the latest version.
2) Unlock bootloader.
3) Install and boot into TWRP with keep system as read only and cancel if prompt for password.
4) Install FED and Magisk.
If to install updates over existing miui version:
1) Boot into TWRP
2) Install the updates.
3) Install FED and Magisk.
4) Clear dalvik cache and reboot.
thomas140 said:
If to install updates over existing miui version:
1) Boot into TWRP
2) Install the updates.
3) Install FED and Magisk.
4) Clear dalvik cache and reboot.
Click to expand...
Click to collapse
After step number 2, do you think it will return my stock recovery? Coz there's no re-flashing of TWRP in your steps.
asin_punk said:
After step number 2, do you think it will return my stock recovery? Coz there's no re-flashing of TWRP in your steps.
Click to expand...
Click to collapse
As for my understanding, it will return to stock if you didn't flash the force encryption Disabler, that's the point to keep twrp if install the update.
If we had to flash magisk again means we will looks all data again, is it?
---------- Post added at 06:35 AM ---------- Previous post was at 06:35 AM ----------
thomas140 said:
As for my understanding, it will return to stock if you didn't flash the force encryption Disabler, that's the point to keep twrp if install the update.
Click to expand...
Click to collapse
If we had to flash magisk again means we will looks all data again, is it?
safdar kb said:
If we had to flash magisk again means we will looks all data again, is it?
---------- Post added at 06:35 AM ---------- Previous post was at 06:35 AM ----------
If we had to flash magisk again means we will looks all data again, is it?
Click to expand...
Click to collapse
Because you are flashing the update via twrp. After the flash, you are still in twrp. This is the moment you decide to keep twrp or not. If not to keep, then you can reboot as per normal and let the encryption run itself and back to stock recovery. I am not sure how will the magisk become after this.
Therefore, I will flash FED for magisk 17.3 before I reboot.
If you've flashed a non-stock recovery like TWRP*, you can not use the OTA update feature. You need to flash the full ROM via TWRP.
* TWRP is now officially supported, make sure you flash that version if you're using an older, unofficial TWRP.
1. Obtain the ROM you want to install. Make sure the download is from miui.com if you want stock
Official site -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab. The website does not update links immediately after a ROM update is released, so you may have to do a bit of digging if you want a very recent update.
You can also check ROM links on third party sites like ezbox.idv.tw, again, make sure the actual download links are from miui.com and not somewhere else.
Latest EEA ROM(Android 10) as of 2020-10-24 -
V12.0.3.0.QFJEUXM
Nightly official LineageOS builds
2. Get into TWRP
Either run 'adb reboot recovery'
Or power phone off and boot into TWRP by holding PWR+VOL_UP during boot
3. Upload the ROM to the phone
Code:
adb push ~/Downloads/[B]miui_DAVINCIEEAGlobal_V12.0.3.0.QFJEUXM_12b99693bc_10.0.zip[/B] /sdcard/
4. Flash the ROM via TWRP
5. Flash Magisk if you use it, because flashing the ROM deletes it.
6. Remove the update file:
Code:
adb shell rm /sdcard/[B]miui_DAVINCIEEAGlobal_V12.0.3.0.QFJEUXM_12b99693bc_10.0.zip[/B]
That's it! Reboot your phone into your new ROM!
Also check out my debloat list and my detailed phone settings.
Additional note - formatting /system will brick your phone and you'll have to recover using a fastboot ROM.
Please can I get the 10.3.15 ota zip for the official recovery I cant get the update and my phone is now on 10.3.12 it always say no update available even though I have done the update before and returned to 10.3.12 but it does show it to me again and also my otg doesn't work . please help me
Benfatica said:
Please can I get the 10.3.15 ota zip for the official recovery I cant get the update and my phone is now on 10.3.12 it always say no update available even though I have done the update before and returned to 10.3.12 but it does show it to me again and also my otg doesn't work . please help me
Click to expand...
Click to collapse
OTA zip is here => https://bigota.d.miui.com/V10.3.15....PFJEUXM-V10.3.15.0.PFJEUXM-14bc6a5788-9.0.zip
Micdu70 said:
OTA zip is here => https://bigota.d.miui.com/V10.3.15....PFJEUXM-V10.3.15.0.PFJEUXM-14bc6a5788-9.0.zip
Click to expand...
Click to collapse
Thanks,I was able to get it over ota but it doesn't come now has xiaomi removed it or something
I also get this message if I try to download the latest package. Is something wrong with my phone
It looks like the 10.3.15.0 update was pulled and 10.3.12.0 is now latest.
C0rn3j said:
It looks like the 10.3.15.0 update was pulled and 10.3.12.0 is now latest.
Click to expand...
Click to collapse
Ok thanks, but why though ??
My last update is 10.3.11.0 July security patch
C0rn3j said:
If you've flashed a non-stock recovery like TWRP, you can not use the OTA update feature. You need to flash the full ROM via TWRP.
So how to get around this when the updater is telling you there is an incremental update?
Simple, we tell the updater to download the full image instead, move the update from the original folder so MIUI won't attempt to upgrade from it on next reboot, boot into TWRP and flash the image there.
1. Settings -> About Phone -> System update -> three dots -> Download latest package
2. Get filename of the update:
3. You now have the filename of the update. I got miui_DAVINCIEEAGlobal_V10.3.15.0.PFJEUXM_b6738621e2_9.0.zip and will be using this name throughout the rest of this how-to, replace the examples accordingly based on what name you got.
4. (optional) Backup the latest ROM file to your PC:
5. Prevent MIUI from seeing the update file and trying to update from it on accident by moving the file a folder higher:
6. Power phone off
7. Boot into TWRP by holding PWR+VOL_UP during boot
8. Flash the ROM via TWRP
9. Flash Magisk if you use it, flashing the ROM deletes it.
10. Boot back into Android and remove the update file:
That's it!
You can also download the full ROM directly through miui.com, but keep in mind the website does not instantly update the link there after a ROM update is released.
https://en.miui.com/download-361.html#619 -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab.
Page best viewed in Firefox, clicking on the lock icon -> Arrow icon in the security tab -> Disable protection, since Xiaomi can't even set their website up properly.
In my case the ROM download through phone was corrupted and I had to edit the site URL from the filename I got to get a proper update file:
Click to expand...
Click to collapse
Redmi K20 Open Beta File Link?
Wrong thread.
Don't quote the OP, it clutters the thread.
For people who want the 10.3.15.0 update. I uploaded it to mega. Link is here:
https://mega.nz/#!pddQUaBL!s5En8LWaxWciUyNowU8_rYYMk2D48Dj8J7_PbJwv0kc
C0rn3j said:
...
https://en.miui.com/download-361.html#619 -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab.
Page best viewed in Firefox, clicking on the lock icon -> Arrow icon in the security tab -> Disable protection, since Xiaomi can't even set their website up properly.
...
Click to expand...
Click to collapse
The most accurate, updated and actual site for Mi 9t/K20 (davinci) firmware/rom - https://mirom.ezbox.idv.tw/en/phone/davinci/
10.3.15 ota is back online, just received it
Hey @C0rn3j
I am on stock 10.3.12.0 PFJEUXM and TWRP 4PDA 3.3.1.-2 fix and Magisk.
My questions:
1. Is it worth the upgrade to MIUI 11 as it is still Android 9
2. If I flash it through TWRP, did you loose any dual app settings? (as I lost dual apps while backing up the phone with TWRP and Titanium backup)
3. as you said I have to flash the Magisk again, did you choose the latest or the same as was installed on the phone before the upgrade?
Thanks in advance for reply
rastip said:
Hey @C0rn3j
I am on stock 10.3.12.0 PFJEUXM and TWRP 4PDA 3.3.1.-2 fix and Magisk.
My questions:
1. Is it worth the upgrade to MIUI 11 as it is still Android 9
2. If I flash it through TWRP, did you loose any dual app settings? (as I lost dual apps while backing up the phone with TWRP and Titanium backup)
3. as you said I have to flash the Magisk again, did you choose the latest or the same as was installed on the phone before the upgrade?
Thanks in advance for reply
Click to expand...
Click to collapse
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
C0rn3j said:
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
Click to expand...
Click to collapse
I have Nova Launcher, do you use default or as well external one?
Do you think Nova will stay untouched with this upgrade?
rastip said:
I have Nova Launcher, do you use default or as well external one?
Do you think Nova will stay untouched with this upgrade?
Click to expand...
Click to collapse
Nothing will happen to it
If the Magisk have to be flashed again, does it mean all the hide settings which were there before has to be set again or stay there from the old version? I have few apps in Magisk hide root, so just wondering how this will be affected with rom update
A second question:
I am on 10.3.12.0 not upgraded yet to 10.3.15.0.
Can I upgrade straight to V11.0.2.0 or first to 10.3.15.0 and then to V11?
---------- Post added at 05:27 PM ---------- Previous post was at 05:09 PM ----------
C0rn3j said:
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
Click to expand...
Click to collapse
While flashing did you untick Recovery in the TWRP as I believe the whole 2,2GB ZIP has recovery image and could be flashed and overwrite the TWRP?
Your guide not working, twrp failed to install the update "file corrupted".
I've downloaded the OTA package from "http://c.mi.com//miuidownload/detail?device=1700361" and twrp very happy to install this file, my Mi_9T at the latest update 11.
Unfortunately the archive downloaded through the Updater cannot be flashed as is through TWRP (message: file corrupted)
miui_RAPHAELEEAGlobal_V11.0.3.0.QFKEUXM_153f9511ae_10.0.zip
Hi using latest updated stock rom with root..
Magisk
New August update doesn’t install..
Before i used to install updates in root..
Now cant..
Help..
Do you have twrp installed and if so did you flash any mods to the system?
If no mods were installed just flash the stock boot.img for your firmware version using fastboot and reboot and apply the update
garylawwd said:
Do you have twrp installed and if so did you flash any mods to the system?
If no mods were installed just flash the stock boot.img for your firmware version using fastboot and reboot and apply the update
Click to expand...
Click to collapse
I have only magisk.. I got no mods.. Only by magisk i installed everything... How to get stock boot img? U mean unroot?
I have twrp sharp installed.on slot...
Sami Devo said:
I have only magisk.. I got no mods.. Only by magisk i installed everything... How to get stock boot img? U mean unroot?
I have twrp sharp installed.on slot...
Click to expand...
Click to collapse
Custom recovery that's why you cant install. Ota updates don't usually work with a custom recovery installed. You will have to flash stock boot.img there is a whole thread about this and all versions of the stock boot.img here https://forum.xda-developers.com/mi-a3/how-to/guide-how-to-root-mi-a3-magisk-t3958509/page43
You were even the last person to comment on that thread
My build..
garylawwd said:
Custom recovery that's why you cant install. Ota updates don't usually work with a custom recovery installed. You will have to flash stock boot.img there is a whole thread about this and all versions of the stock boot.img here https://forum.xda-developers.com/mi-a3/how-to/guide-how-to-root-mi-a3-magisk-t3958509/page43
You were even the last person to comment on that thread
Click to expand...
Click to collapse
But i had custom recovery and it installed before..the boot.img have to match with current build? For fastboot flash?? And which slot i have to flash the boot?
This might help (as long as you really read it and follow instructions): https://forum.xda-developers.com/mi-a3/how-to/guide-failed-ota-update-installation-t4041291
_mysiak_ said:
This might help (as long as you really read it and follow instructions): https://forum.xda-developers.com/mi-a3/how-to/guide-failed-ota-update-installation-t4041291
Click to expand...
Click to collapse
This link u give is for flash fastboot rom
Should i uninstall magisk and try?
Sami Devo said:
This link u give is for flash fastboot rom
Click to expand...
Click to collapse
Maybe try to read it at least one more time..
same but different problem.
I'm having somewhat similar problem here, but the thing is, I'm using stock mi a3, without any custom bootloader, twrp, rom, etc.
currently in version 11.0.17.0.QFQMIXM
trying to install the august security update that was supposed to be version 11.0.20.0
updater showed the august update as 464mb, which is weird as its supposed to be 34mb or so.
any help from the experts here are kindly appreciated.
I have no custom recovery, or magisk but have same problem
So I solved the problem as I love root .. I had to loose recovery sharp... Now I have no recovery . I flashed stock ROM of Build 19 and installed the latest OTA . After then I extracted the boot image of stock ROM then I patch stock boot image of latest build.i got now root with magisk with no recovery . I hope I can install future OTA with the method..
If u can't install u must have to flash fastboot..
I have tried restoring stock boot.img of build 19.. but doesn't installed.. although I removed custom recovery but still couldn't install OTA..
Sami Devo said:
So I solved the problem as I love root .. I had to loose recovery sharp... Now I have no recovery . I flashed stock ROM offer BL 19 and installed the latest OTA . After then I extracted the boot image of stock ROM then I patch stock boot image of latest build.i got now root with magisk with no recovery . I hope I can install future OTA with the method..
If u can't install u must have to flash fastboot..
I have tried restoring boot.img of build 19.. but doesn't installed.. although I removed custom recovery but still couldn't install OTA..
Click to expand...
Click to collapse
thanks for the great advice. anyone willing to do the needful, might as well do as suggested. but i kind of trying to keep things stock as much as i can, dont have the time to fiddle around as much. this phone is buggy enough as it is
decided to backup everything and reset for now. might root if resetting didnt fix the issue. cheers mate! :good:
weeeeeeeb said:
thanks for the great advice. anyone willing to do the needful, might as well do as suggested. but i kind of trying to keep things stock as much as i can, dont have the time to fiddle around as much. this phone is buggy enough as it is
decided to backup everything and reset for now. might root if resetting didnt fix the issue. cheers mate! :good:
Click to expand...
Click to collapse
???Yah.. i have some apps which i must use! Such as greenify , titanium backup.. those r core of root..
Am looking forward to meet another update challenge. Am ready.
weeeeeeeb said:
I'm having somewhat similar problem here, but the thing is, I'm using stock mi a3, without any custom bootloader, twrp, rom, etc.
currently in version 11.0.17.0.QFQMIXM
trying to install the august security update that was supposed to be version 11.0.20.0
updater showed the august update as 464mb, which is weird as its supposed to be 34mb or so.
any help from the experts here are kindly appreciated.
Click to expand...
Click to collapse
No its not weird. Becoz july update n also August both have to installed by u...thats y its not only 35mb.ur build is too old. It ought to be a big update
Tyrese117 said:
I have no custom recovery, or magisk but have same problem
Click to expand...
Click to collapse
Then u need to flash fastboot rom
Sami Devo said:
Then u need to flash fastboot rom
Click to expand...
Click to collapse
I have installed July patch without any problem
I have solved this problem
Download recovery rom and flash from stock recovery: APPLY UPDATE FROM SD CARD
Tyrese117 said:
I have solved this problem
Download recovery rom and flash from stock recovery: APPLY UPDATE FROM SD CARD
Click to expand...
Click to collapse
this is very hard work.. i cant do that in every month and retaining root again!