Do not get it. The free case provided with the phone is better!
I thought the textured nylon back would provide some grip, it doesn't. It's very slippery.
Secondly... Wow... if there was ever a lint, dust, dirt magnet. It's like trying to remove dog hair from your clothing, really annoying.
Do not get it, unless you continuously enjoy trying to get crap off your case.
That was my concern why I held off. I also got sold into using those pop sockets. So that won't work with the nylon case
Been using the case for few days now and I'm happy. I agree with the grip issue, the back is slippery but the sides are grippy.
No dirt/dust issue for me, easy to clean.
I went with the nylon case when I ordered the phone. I personally think it's a great case. You are correct on the grip and lint magnet issues. But, any lint can be easily removed just by rubbing over it. I've tried a couple other cases I purchased, but keep coming back to the nylon because I really like the look.
It all comes down to personal preference.
zymphad said:
Do not get it. The free case provided with the phone is better!
I thought the textured nylon back would provide some grip, it doesn't. It's very slippery.
Secondly... Wow... if there was ever a lint, dust, dirt magnet. It's like trying to remove dog hair from your clothing, really annoying.
Do not get it, unless you continuously enjoy trying to get crap off your case.
Click to expand...
Click to collapse
I've had it since day one and haven't had a single of the problems you listed. It's awesome. The felt on the inside is also great because it keeps scratches off of the back.
I also have it since day 1 and I love it. Side grip is ok, and it remained clean so far. However, for sure it's gorgeous!
I have the Karbon case and the Nylon case. I bought the Karbon when I bought the phone. I bought the Nylon with a bundle accessory pack from 1+. OP is correct in that the Nylon back is very slippery - but the sides are really grippy. I prefer the Karbon case because it is slimmer all around and the back is more grippy - it kinda feels like the rubberized paint some OEMS used to use. Of course, I also have that original TPU case - it's still in the box.
I'm using Nylon case but my opinion is very different. I don't have any issues with grip, or debris?
I want one with a grippy back. Tired of my phone slipping off the dash. Since I'm very rural, have to keep it there to have a signal.
the grip issue i can agree with, however not so much on the dirt/debris issue. the first day it seemed like it was picking up fuzzies, however after that its been fine. once in a while ill put it in a new hoodie pocket and it will get a little lint on it but its very easy to wipe off. not to mention it looks gorgeous.
Related
I personally love the feel of my vibrant without the silicon casing on but unfortunately, I have to go with it whenever I leave the house to protect it from knicks and knacks (plus I always seem to drop my phone...)
I have a screen protector (REALOOK) and a TPU case. I too like the way the phone feels and looks without a case but yea, it needs to be protected. My old G1 got bang up pretty bad by not using protection... LOL...
I've had my vibrant in a case since day one but still have scratches all over the body. I think the shiny plastic material is just scratch prone. If I had to do over I would have tried some of the clear body armor type product. Definitely love the bare feel, may just go without a case and hope replacement parts become available.
Sent from my GT-I9000 using XDA App
I have the stealthguards screen protector and battery cover protector. Both are mainly on there just for weight and grip and the front is also on to make my vibrant have a flush front.
Silicone = ****
polyurethane Is The Way To Go, Alot More Protective And A Better Fit For Your Phone
I rock mine naked. I had a hard clear case for my G1, but it really didn't do a whole lot of good and my screen didn't get scratched at all. The Vibrant has gorilla glass and you get a 2nd back cover out of the box so I decided to go without.
I've got a realook screen protector and the tmobile gel case.
My battery cover AND the faux metal bezel are pretty scratched up. Been in the case since day one, so I suspect the gel case scratches it. Go figure.
I honestly didn't like the bare feel. Too slippery and small, so now I have a rubber case in it. Fits like a glove and grips better while still sliding out of the pocket without sticking. And of course a screen protector. I kept one on my g1 since day one. Its beaten to hell, the lip part is cracked and the sdcard unmounts if you apply pressure but the screen is flawless lol
Sent from my SGH-T959 using Tapatalk
I use a Casemate Tough Case and have been using this style of case on all my phones for years. Usually Otterbox, but they took too long this time around so I gave the Casemate a try. I never drop my phone, but I have two kids under 5, so the cases are definitely tested from time to time. There are no better cases if you want real protection, IMO.
Sent from my SGH-T959 using XDA App
I've got the hard Body Glove case with the black rubberized back. I haven't tried any other cases because I really like this one. The phone just felt too fragile to me without a case, this gives it a little bulk and makes it feel a little more substantial.
No screen protector. I haven't seen the need for one. I'm not super careful with it either and will carry it in a pocket with keys and loose change pretty often. Been doing this for 2 months and no scratches on my screen. The screen is definitely pretty tough.
this is a $500 phone, and it's slippery. I drop **** all the time so i got the silicon case. it looks lumpy, but it's worth it.
mmas0n said:
I use a Casemate Tough Case and have been using this style of case on all my phones for years. Usually Otterbox, but they took too long this time around so I gave the Casemate a try. I never drop my phone, but I have two kids under 5, so the cases are definitely tested from time to time. There are no better cases if you want real protection, IMO.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I have the same case and 3 kids under 5. Its the best option for me and feels really solid while holding.
I have hybrid TPU case, and so do allot of others here
...id vote but not listed in poll...hint hint
smutek said:
I've got the hard Body Glove case with the black rubberized back. I haven't tried any other cases because I really like this one. The phone just felt too fragile to me without a case, this gives it a little bulk and makes it feel a little more substantial.
Click to expand...
Click to collapse
Couldn't have said it better. I use the BG case, and love it -- the look, the kickstand, the added bulk. (The "naked" (ugh) phone is too thin to hold comfortably on a call; and others have said, it's slippery as hell.
I utilized the stealthguard front and back. So its practically naked.. but not naked
me like sexi like bikini oki
hottie girls
I'm amazed by the durability of the screen. I don't make it a habit of putting it in my pocket with anything inside, but when I have and cringed as I pulled it out expecting scratches, to my surprise no scratches.
As a rule, the harder the cover material, the more the shock will be transferred directly to the phone. The same for the sticker types which are more for protection against scratches.
I ended up buying a cover from tmo because the phone felt a little slippery by itself. Its made of silicone and think enough to absord some of the impact if it is dropped and us les likely to slip out of your hand.
Sent from my SGH-T959 using Tapatalk
I bought the tmo black silicone case. I really like it because it adds grip and gives the phone a more solid, quality feel. One thing I've noticed is if you take the back cover plate off too much...it gets loose and creaky. They really should have gone with the slide lock type.
Sent from: my Vibrant juiced with Eugene's 2.2 Froyo JPM
Case-Mate Tough Case.. no screen protector here
I use a RealLook screen protector and one of these clear, hard cases:
http://www.buy.com/pr/product.aspx?sku=217139826
Super inexpensive (bought 2, 1 extra to have on-hand)! Been using clear hard cases like these since my MyTouch3G and I've dropped it (the MT3G) several times onto concrete without a single scratch or damage to the phone. The case took the brunt of the impact. Put a very small crack in it, but nothing else. Ended up replacing it anyway, but that was enough to make me buy them for the Vibrant now. I just don't get that sense of protection from a semi-thin silicone sleeve. Sort of like gluing a bunch of balloons to the exterior of your car and thinking it's going to protect you in a head-on collision. Just not buying it...
Anyone have any of the SUPCASE Cases?
I am looking at the
Unicorn Beetle Premium Hybrid Protective Case (Frost Clear/Gray)
http://www.amazon.com/SUPCASE-LG-G3...TF8&qid=1407151419&sr=8-7&keywords=lg+g3+case
Unicorn Beetle PRO Series Full-body Hybrid Protective Case
http://www.amazon.com/SUPCASE-Case-...TF8&qid=1407161034&sr=1-4&keywords=lg+g3+case
I have the Spigen Slim Armor now but its too slippery and the back scratches easily.
The bigger cut outs of the back buttons on the SUPCASE look like they would be better then how the SlimArmor is setup.
Can any provide any pictures of theres and how they like it? Or if they bought one but ended up not liking it and getting something else?
I received the first one you mention on Friday (clear/black) and I love it.
The fit is tight and the cut outs are perfect. It keeps the phone pretty slim and looks great with the clear back.
I had a similar case for my galaxy s4 from poetic and it was just a great look for me.
If you're rough with your phone and it gets banged around alot or dropped alot, then this might not be for you.
It offers average protection, which is good for me 90% of the time as I work in an office or I'm in my car.
For slightly better protection I bought the verus iron shield which I should be receiving today and am very excited about.
It also looks great and will protect my g3 a little better on the weekends.
Anyway, I do highly recommend the supcase after a few short days and the price is pretty good too.
As far as pics, the ones on amazon do it justice.
Hope this helps. There are many good cases and you won't do wrong with any of them.
Androider4Life said:
Anyone have any of the SUPCASE Cases?
I am looking at the
Unicorn Beetle Premium Hybrid Protective Case (Frost Clear/Gray)
http://www.amazon.com/SUPCASE-LG-G3...TF8&qid=1407151419&sr=8-7&keywords=lg+g3+case
Unicorn Beetle PRO Series Full-body Hybrid Protective Case
http://www.amazon.com/SUPCASE-Case-...TF8&qid=1407161034&sr=1-4&keywords=lg+g3+case
I have the Spigen Slim Armor now but its too slippery and the back scratches easily.
The bigger cut outs of the back buttons on the SUPCASE look like they would be better then how the SlimArmor is setup.
Can any provide any pictures of theres and how they like it? Or if they bought one but ended up not liking it and getting something else?
Click to expand...
Click to collapse
Thanks for the input.I was looking at the Versus Thor case also but some reviews said it affects signal. And the back button cut out on is tight like on the slim armor and that kinda bothers me..The supcase button cuts are larger which i think would be better
I'll let you know about the verus as I'll have it this afternoon.
I read the same about signal but I also read in more places that it wasn't true.
The video reviews on youtube really sold it for me an hopefully I like it as much as I think I will.
Take it easy.
Androider4Life said:
Thanks for the input.I was looking at the versus also but some reviews said it affects signal. And the back button cut out on is tight like on the slim armor and that kinda bothers me
Click to expand...
Click to collapse
I have the first one and agree with bkrickels.
I might prefer something a little thinner, but this certainly isn't bulky. No complaints on the back buttons with this.
Definitely no issue with signal. I can keep a call up every time driving on this one road that my GS3 dropped the call on every time.
I do hope Qi works through this case. I'll probably know that next week when my sticker comes.
lexluthor said:
I have the first one and agree with bkrickels.
I might prefer something a little thinner, but this certainly isn't bulky. No complaints on the back buttons with this.
Definitely no issue with signal. I can keep a call up every time driving on this one road that my GS3 dropped the call on every time.
I do hope Qi works through this case. I'll probably know that next week when my sticker comes.
Click to expand...
Click to collapse
Back button complaint was on the Verus Case and my slim armor..signal issues was geared towards reviews on the Verus case
I got the Unicorn Beetle and so far I like it. It has a good feel in your hands but it does add some bulk to the rear of the phone. It is a somewhat thick case and does add some mm onto the phone and weight.
I forget how much it does so until I remove the case and feel how light and thin the G3 actually is.
It does offer some great protection and this case WILL NOT bounce or fall apart during a fall or impact. The G3 fits impressively nice and snug in its case.
It is a PITA to remove the phone though, this thing is practically cemented in but once you know how to get it off, but just doesn't take as long but still is hard to do so.
It does come with a built in screen protector but I didn't need it because I had a tempered glass one installed. So I removed it and then had to spend half an hour removing all the glue that was holding it in place. The damn protector just pops out and leaves ALL its glue and adhesive on the inside of the front section of the case.
I used Goo Gone, thinner, hot water and soap and I still had to scrub it off. What a PITA...
But, I need a rough and tumble case for my job and the Unicorn does it.
Just be forewarned, it does add a bit of bulk and weight to the phone but it feels good holding it and! It has its corners notched off, giving it a Galactica prop like effect.
JustLok said:
I got the Unicorn Beetle and so far I like it. It has a good feel in your hands but it does add some bulk to the rear of the phone. It is a somewhat thick case and does add some mm onto the phone and weight.
I forget how much it does so until I remove the case and feel how light and thin the G3 actually is.
It does offer some great protection and this case WILL NOT bounce or fall apart during a fall or impact. The G3 fits impressively nice and snug in its case.
It is a PITA to remove the phone though, this thing is practically cemented in but once you know how to get it off, but just doesn't take as long but still is hard to do so.
It does come with a built in screen protector but I didn't need it because I had a tempered glass one installed. So I removed it and then had to spend half an hour removing all the glue that was holding it in place. The damn protector just pops out and leaves ALL its glue and adhesive on the inside of the front section of the case.
I used Goo Gone, thinner, hot water and soap and I still had to scrub it off. What a PITA...
But, I need a rough and tumble case for my job and the Unicorn does it.
Just be forewarned, it does add a bit of bulk and weight to the phone but it feels good holding it and! It has its corners notched off, giving it a Galactica prop like effect.
Click to expand...
Click to collapse
Thanks for the info..This Unicorn Beetle PRO Serie is case I am leaning towards..On my past phones Glaxay Nexus and Note 2 i used Otterbox defender and Seidio cases. So I would assume this adds about the same bulk.
Do you have any pics of the phone in the case or side by side to how much bulk it does add?
Also curious if the back scratches easy or holds up well.
I have a glass protector also so id be removing the bultin one
Ordered the Verus Thor from Amazon and I ended up sending it back. To me, it wasn't slim. It added some bulk to it. I have the Seidio Surface and I love it. Minimal bulk and still keeps near its original form factor.
i have the one with the clear back and i had it on my m8 and it is one of the best cases out there.
I just got my G3 on Friday and the first thing I did was go on Amazon and order the Clear/Black Supcase and temepered glass screen protector. They really make the best slim TPU style case. Nice and tight fitting, never had to worry about the material stretching on your like other TPU style cases. If there is a Supcase for my device im running it plus tempered glass and im good! Can't go wrong with it.
Not concerned with the case keeping a slim design..I'd rather have protection over looks
Using a Supcase, black with black.
Slim and works fine with my tempered screen protector.
Androider4Life said:
Anyone have any of the SUPCASE Cases?
I am looking at the
Unicorn Beetle Premium Hybrid Protective Case (Frost Clear/Gray)
http://www.amazon.com/SUPCASE-LG-G3...TF8&qid=1407151419&sr=8-7&keywords=lg+g3+case
Unicorn Beetle PRO Series Full-body Hybrid Protective Case
http://www.amazon.com/SUPCASE-Case-...TF8&qid=1407161034&sr=1-4&keywords=lg+g3+case
I have the Spigen Slim Armor now but its too slippery and the back scratches easily.
The bigger cut outs of the back buttons on the SUPCASE look like they would be better then how the SlimArmor is setup.
Can any provide any pictures of theres and how they like it? Or if they bought one but ended up not liking it and getting something else?
Click to expand...
Click to collapse
I'm rocking the Hybrid Case and love it. I've been an exclusive Spigen customer for years but their case had that cutout which turned me away. This Supcase has the same protection level and looks just as good. The clear back keeps the phones sharp look too. Highly recommend!
I have the first one in gray/clear on my white G3. Looks good. Good protection. Have to agree on earlier post that it is difficult to remove phone from.
Did you look ringke max case? For me is perfect one
i bought both!
i love the frost one and the bigger when when i plan to go outdoors (camping, hiking)
but the slimmer frost one is my daily.
I have one but found the straight edges make it a little uncomfortable to hold. I've gone back to the ultra slim gel case from eBay for about 2.99 feels great and noticeably lighter.
i have the slim sup case.
I like how tight fit it is, even though sides are soft, because fit is so tight, it doesn't move at all. really good case
i don't like how the back is so slippery.
try the Digtronic one too.. I'm tempted to order that one as a backup case.
I have the first case you posted in clear with Gray edges. It looks great on my white phone. My only complaint is that the cut outs on the bottom are uncomfortable. When I am playing with my phone for a while. They irritate my pinkie.
Sent from my LG-D850 using XDA Free mobile app
I usually never had a problem with them, its usually what I buy when I upgrade. But now after taking it off. I really dislike it. That soft shock absorber thing that the phone rests on apparently melts to the phone if it gets too hot. Which it does frequently. I had to peel my phone out of the case and on the back was all the stickey residue covering the back of the phone. A pain to clean. Any recommendations for a case that protects, looks better, and doesn't melt?
Ilikecheese said:
I usually never had a problem with them, its usually what I buy when I upgrade. But now after taking it off. I really dislike it. That soft shock absorber thing that the phone rests on apparently melts to the phone if it gets too hot. Which it does frequently. I had to peel my phone out of the case and on the back was all the stickey residue covering the back of the phone. A pain to clean. Any recommendations for a case that protects, looks better, and doesn't melt?
Click to expand...
Click to collapse
Spigen slim armour is a decent case. It's not too big in your pocket, doesn't stick, and has 2 piece construction for decent shock absorption.
Ah, I've seen it. Looks pretty nice. Might just say screw it and go with zerolemon lol
Great case, but too dang bulky, i love my spigen case
Ilikecheese said:
I usually never had a problem with them, its usually what I buy when I upgrade. But now after taking it off. I really dislike it. That soft shock absorber thing that the phone rests on apparently melts to the phone if it gets too hot. Which it does frequently. I had to peel my phone out of the case and on the back was all the stickey residue covering the back of the phone. A pain to clean. Any recommendations for a case that protects, looks better, and doesn't melt?
Click to expand...
Click to collapse
I have always wondered why I dont see more people using body glove cases, I have been using them for years, they are slim, look good, good quality, protect the phone well and the price is good, there are alot of other good cases out there but I found the body glove case is just as good and runs about $15, alot less then most other good cases....otter boxes suck, they are bulky as hell and never liked them, I had one a few years ago on a phone and got rid of it, my work gives me an I-phone to use and aside from the phone being a piece of s**t they make me keep an otter box on it, it makes the phone even more of a piece of s**t, LOL.....
Hahaha yeah I feel it. I took mine off my of DNA cause it just felt ****ty and I ended up shattering that phone but I have it on the g3 only because I don't wanna destroy this. I rarely drop my phones too but it only takes that one unlucky time. I shall buy dis new case
I had this case for a while and liked it...http://www.bestbuy.com/site/platinu...lack/7251018.p?id=1219260610755&skuId=7251018
I've now got the spigen slim armor and overall I like it....however the slicker back makes it not sit still when laid flat on a table or something, and the volume cutout sucks imho. But other than that a solid choice.
I picked up the Body Glove Rise case today at Walmart. I had a Body Glove on my last phone (RAZR HD) and it worked well. Dropped the phone (RAZR that is) once or twice and no damage or anything to the phone. One drop was face down and the bezel protection really did it's job. Overall, I like this case as it doesn't add much bulk at all so it still fits in my pocket comfortably. Haven't dropped the G3 yet and hopefully, never will, but this case gives me a sense of protection that I didn't have when the phone was naked. Doesn't mean I'll be less careful with it. On the contrary, I'll still continue to be cognizant of maintaining a firm grip on the phone at all times, but at least I have a better chance of the phone surviving a drop with the case than without it.
It looks nice too and now I feel like I have a better grip on the phone.
Which case did you get, the defender or the symmetry? I got the defender, and yeah, great protection, but makes the phone way too big. I was wondering if the symmetry was a little less cumbersome.
I've used otterbox commuter cases in the past and loved them, but this phone is so damn big already, I'm looking for recommendations myself.
Ilikecheese said:
I usually never had a problem with them, its usually what I buy when I upgrade. But now after taking it off. I really dislike it. That soft shock absorber thing that the phone rests on apparently melts to the phone if it gets too hot. Which it does frequently. I had to peel my phone out of the case and on the back was all the stickey residue covering the back of the phone. A pain to clean. Any recommendations for a case that protects, looks better, and doesn't melt?
Click to expand...
Click to collapse
I went from the defender to the Seidio Dilex case/holster combo. Great made case!
Sent from my LG G3
My son had his LG g3 in the OtterBox for some time, I took it out of the OtterBox to put a QI receiver on the back to surprise him for Christmas by having his phone on a QI charger when he woke up. The edges all the way around the phone or severely scuffed for the inside of that case. Not the front or the back, just the edges. He's not using that case anymore.
This is the one I'm using, similar to the OtterBox, but much nicer.
3 in 1 Rugged High Impact Hybrid Anti-Shock Pads Hard + Soft Durabl... http://www.amazon.com/dp/B00MC64WP4/ref=cm_sw_r_udp_awd_MnHQub1D00G06
I have had many cases on the g3, from Incipo, spigen, off brand cheapos and now the Defender from Otterbox. It definitely adds bulk, but by far the most protection. I feel better now, peace of mind I suppose.
Loved the slim armor spigen, but it scratches like crazy!
The Spigen Slim Armor is nice, but mine has issues with popping out of the corners sometimes. Theres a case called the Hyperion thats nice too. Dual layer but just not as protective
Anybody have anything to report on the SUPCASE Unicorn Beetle Pro cases?
$22 from Amazon http://www.supcase.com/smartphone-c...eries-full-body-rugged-hybrid-protective-case
http://www.amazon.com/Unicorn-Beetl..._2_m?s=wireless&ie=UTF8&qid=1429209281&sr=1-2
Well I just bought the blue Otterbox Defender for my new G3 and I like it so far. I just wish the rubber outer layer was the soft silicone rubber instead of the harder rubber but it'll do.
Hey fellas!
I am looking for a premium looking case for my nexus 6.
My phone is white if it matters.
I did like a lot the Nilkin slim border, but its out of stock everywhere.
Also i have found this:
https://www.ebay.com/itm/Luxury-Sli...hash=item41939eb983:m:m2afeTHn0qE_nI9hygZ9iVg
Black aluminum borders.
Besides that, im looking for something that will give me a nice grip yet still make the phone look elegant and aesthetic.
Thanks!
I have that. It looks okay, but the quality is crap. I got rid of it right away.
My favorite Nexus 6 case is this one:
Ringke FUSION [Dust Cap/Drop Protection][CLEAR] Shock Absorption Bumper. (Available on Amazon)
It adds minimal bulk and fits like a glove.
I bought this case about 6mo ago, and have been very happy with it: https://www.ebay.com/itm/152687543728 (Not affiliated with the seller, just a happy customer)
Back is a clear, hard plastic (poly-carbonate?) and the "lip" is a firm TPU-type material. I've dropped it dozens of times with zero problems.
I've used the "S-shape" type cases for other phones in the past. A simpler, less "high-end" look, but they have tiny little "nubs" at the edges that give excellent grip. (Zoom in on pics to see):
https://www.ebay.com/sch/Cases-Cove..._from=R40&_nkw=nexus+6+s+tpu+case+-"nexus+6p"
Guyinlaca said:
My favorite Nexus 6 case is this one:
Ringke FUSION [Dust Cap/Drop Protection][CLEAR] Shock Absorption Bumper. (Available on Amazon)
It adds minimal bulk and fits like a glove.
Click to expand...
Click to collapse
I have this Ringke also and it is a good case, but I wouldn't consider it premium. It does provide adequate protection for minor bumps and falls. It has a large enough lip that my tempered glass screen protector doesn't scratch if I place the phone face-down on a table. The clear TPU yellows over time so it looks dingy though. Depending on how frequently you charge or use a headset, the dust caps can be annoying (of course they are easy to snip off the case if you like.)
Overall it is a very good case and the one I use most of the time, but particularly because of the yellowing of the clear plastic, I can't consider it a premium case.
I use a Spigen slim armor. Very nice looking and protects well. I had together it directly from Spigen though. I tried ordering one from a discounter and they send me a fake. It literally didn't even look like the real thing and lacked the kick stand and didn't even fit properly. They just printed Spigen on some random vaguly similar case and tried to pass it off.
Have had a number of cases over the years and I'm none rival the quality, feel, build, and just plain sexiness of the Seidio Dilex Pro. I'm the best kickstand case as the kickstand itself is metal as well as magnetic, it's also very sturdy. I went thru 2 Spigen Slim Armor kickstand cases after the plastic kickstands broke off then I discovered this beauty lol. Also rocking a Dbrand skin and no problems with the fit. Also the feel of the outside lip is great, more than enough to sit it face down, but formed and angled perfectly as to not in any way hinder using the screen. Seidio is also a big name company so the price is higher @ $29.99, over your run of the mill ebay cases, but as the famous saying goes, you get what you pay for lol.
https://www.amazon.com/Seidio-DILEX-Metal-Kickstand-Motorola/dp/B00S6TA3RW
Also might add that the way the metal kickstand is attached the area is flat which means sitting it on a table it will stay put instead of rocking back and forth lol. The butter shell of the 2 pieces is also covered (or made?) out of something that is pretty grippy, no slick plastic or rubbery TPU to deal with, using it for over a year in construction sites, factories, and other outdoor/dirty jobs it doesn't hold dirt or sweaty skin oils compared to others I've used, I wash mine bout once a month in hot water with dish soap and no warping, deforming, or most of all, fading, still black as the day I got it. And one last awesome thing that's soo small to be easily looked over but makes a huge difference when case makers don't do it is the side buttons, each one is individual, precision molded, and have a very satisfying feel when depressing them. It may be a tad bigger compared to bumpers or extremely thin shell cases which are barely a step up over a full Dbrand or (can't remember the other skin company) skin lol, I found myself loving the size, it's not full on OtterBox, but it still is thin enough to let me use it one handed which is whenever I'm doing anything but typing lol.
::Edit:: Oh yea, it comes in Black, Blue, Red, and White. Seidio also makes a Surface case with the metal kickstand as well and I'm sure it's just as high quality of a product I have not tried it myself and cannot attest to it's build, here is an Amazon listing tho if you would like to see it, it is one that includes a belt holster tho there are listings without the holster for cheaper.
https://www.amazon.com/Seidio-SURFACE-Kickstand-Holster-Motorola/dp/B00S6T9YTK
I just got my 6T last month for my birthday. Great phone.Used the stock case for a couple for about 3 weeks and decided to get the Spigen Tough Armor. It seems like the case hurts my hand..? Since it's a little wider?Is it just me or is anyone else with the case experiencing this? What other cases can you guys recommend?I'm going to go back to the case the phone came with tonight.
Nope that is the case for this case. Because of the weight it presses down against your finger that naturally rests by the charging port and strains it. I have the case but only use it when I need it.
ogkillergreen said:
Nope that is the case for this case. Because of the weight it presses down against your finger that naturally rests by the charging port and strains it. I have the case but only use it when I need it.
Click to expand...
Click to collapse
What case do you normally use? Any suggestions?
ry_t said:
What case do you normally use? Any suggestions?
Click to expand...
Click to collapse
Spigen Liquid Air is really nice. It's not bulky/heavy and it provides pretty decent protection
can confirm that cases like spigen tough armor can hurt your hand specifically the thumb part due to weight, I remove my case whenever I use it while in bed, I also installed a skin on my 6T to avoid scratching the glass when going naked, I recommend this one from aliexpress:
https://s.click.aliexpress.com/e/bIj9oroM
https://s.click.aliexpress.com/e/bbu3XVoM
ogkillergreen said:
Spigen Liquid Air is really nice. It's not bulky/heavy and it provides pretty decent protection
Click to expand...
Click to collapse
i second that. I ditched my OEM cases the second i put the Liquid Air on. the only flaw so far is a rough edge on the back where the soft plastic meets hard plastic. it could be a bit more grippy, but the triangle pattern is better than the ones i had on my axon 7s Spigen cases i loved as they were slick af on the back. i have dropped my phone multiple times in that case with a Skinomi and with a Dbrand screen protector. The combos saved my phone. The SPs not so much, but between the case and those, my OP6t is still minty.
Ive the Spigen liquid air. Great case
I went with the poetic case, for 360deg protection, after having a wife proof case on my pixel XL.
I exacto'd off the charging port cover because I didn't like how the cover pressed against the USB cable and caused pressure on the port.
Only downside of the case is that it's not a sealed case like the other, and occasionally I'll take it apart to clean it out. The kickstand predictably broke, but that's to be expected since it's plastic and mounts with a few pins.
mmarcz
I have the OEM nylon case and I have the same issue too. Holding the phone in portrait for a long time hurts my hands. That's why I always take off the case when I'm lying down, but the phone becomes slippery. I'm going to install a skin on this phone, so it's not slippery when naked.
Figured I would chime in on this since I just returned my spigen tough armor.
I liked the case for protection. Had a decent screen side lip and good protection for the camera also.
However, the buttons for me were the worst part. They blend in to the side of the case to where you can't find them in the dark easily at all. The case is bulkier then a slim case but thats to be expected, it didn't bother me that much.
The kickstand was also very weak and doesn't work in portrait. I returned it and got a case that was 1/3 the price and is a little better IMO.
https://www.amazon.com/dp/B07KVFNLB4?ref=ppx_pop_mob_ap_share